Dvojpolžni ekstruder Weber DS-85

Hans Weber Maschinenfabrik DS-85

Leto izdelave: 1985, stanje: dober (rabljeno), Offer 22556 Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Max. cutting length: 3000 mm - Minimum cutting length at 90° and 45°: 335 mm - Cutting range: see attached diagram - Manual swivel range inward: 90° - 22.5° - Manual tilt range inward: 90° - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per cycle approx.: 64 l - Space requirements approx.: W 4500 x H 1950 x D 1600 mm - Weight approx.: 1400 kg - With: - Adjustable cutting length with positioning control - Positioning control renewed ca. 2002 by WOLFF - Saw unit can be swiveled and tilted for tall and wide profiles Njdpeimdlrefx Altecw - Also suitable for compound/miter cuts

Stanje: rabljeno, Leto izdelave: 1951, Technical Details: Swing over bed: 400 mm Swing over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions (LxWxH): 2.6 x 1.4 x 1.3 m Ncedpfxsu Ix Hdo Altow The lathe is equipped with a thread cutting device. It has been rewired and fitted with a new control cabinet. Emergency stop switch and chuck guard 3-jaw chuck, Ø 250 mm Live centre Toolpost: four-way toolholder Compound slide swivels approx. 30° to the right/left Taper turning attachment (taper 15° right/left) 4 change gears included

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016 * Delujoče in tehnično pregledano * Največja dolžina reza: 4.000 mm * Premer žaginega lista: 500 mm * Pnevmatsko nagibanje obeh žaginih glav na 90°, 45° in 22,5°; vmesni koti nastavljivi ročno * Nadzorna plošča z Windows krmiljenjem Nedpfxstqmmds Altecw * Sistem hlajenja in mazanja za obe žagini glavi * Premišljiva valjčna proga za dovajanje materiala * Pnevmatične vertikalne in horizontalne vpenjalne naprave * Samodejni zaščitni pokrovi žaginih listov * Izhodna naprava za dolge obdelovance * Zaščitne varnostne naprave z dostopnimi vrati

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Kompletna ekstrudijska linija za PVC profile, v celoti obnovljena in preizkušena EKSTRUDER: • IDE 75/25 tip ME7/3 • Enopolžni polž, geometrija profila PVC in plašč v dobrem stanju • Upravljanje preko zaslona (naknadno vgrajeno s strani proizvajalca) • Leto izdelave: 1993 • Motor 35 kW, 4 do 40 vrt/min KOEKSTRUDER: • IDE MEB 30/25D • Enopolžnik Ø30 mm 25LD • Polž z geometrijo za PVC profile in valj v dobrem stanju • Leto izdelave: 1992 • Motor 3,8 kW, 6 do 64 vrt/min KALIBRACIJSKA MIZA: • IDE • Dolžina: 2 metra • 2 vakuumski črpalki, 16 ventilov • 14 vodnih ventilov • Ročno nastavljiva v vodoravni in vzdolžni smeri VLEČNI VOZIČEK: • IDE ME30/5 • Leto izdelave: 1993 • Dolžina stika: 1100 mm • Širina: 100 mm KROŽNA ŽAGA • IDE ME52 • Premer žaginega lista: 300 mm • Motorizirano pomikanje • Pnevmatsko pomikanje vozička 180 mm • Leto izdelave: 1991 IZMETNA MIZA • IDE • Dolžina: 4000 mm Ncjdjya Eldopfx Altjw • Pnevmatsko pomikanje Celota je v zelo dobrem splošnem stanju, stroji so zelo čisti in pripravljeni za uporabo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 39.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, A used and fully functional profile production line for rigid PVC profiles, consisting of the following components: Twin-screw extruder (parallel) Manufacturer: WEBER Model: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 h Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, infinitely variable Drive motor: DC low-voltage motor, thyristor-controlled Drive capacity: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fans) Adapter heating zone: 1 Tool heating zones: 5 Control system: conventional with digital temperature controllers Degassing: rotary vane vacuum pump, Busch (1.5 kW) Max. output: 120–150 kg/h for rigid PVC, depending on material Connected load: approx. 50 kW (without tooling) Special accessories: melt temperature sensor, melt pressure sensor Adapter between extruder connection and extrusion tooling Used tooling set for a window profile (profile extension), consisting of: - Extrusion die for profile extension, incl. heating bands Ncedeyx Dwkspfx Altow - Dry calibration unit - Vacuum tank approx. 2 m long, with 8 inserts for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Model: CAL VAK 4P Year of manufacture: 1992 Machine no.: K9209590 Total length: 6500 mm Vacuum pumps: 4 units Speck vacuum pumps (each 4.3 kW) Water circulation pumps: 2 units Calpeda (each 1.1 kW) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Model: CAT PUL 2D Year of manufacture: 1992 Machine no.: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Max. pulling force: approx. 25,000 N Speed range: max. approx. 10 m/min Profile saw: TCT circular saw blade: Ø 450 mm Max. profile cross-section: approx. 300 x 100 mm Tipping table Manufacturer: Ide Model: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The entire line was overhauled in 2020 and has only been in operation for 325 hours since then.

Leto izdelave: 1990, stanje: dober (rabljeno), This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is currently located in the machinery warehouse of Plastima Used Machinery. The unit, a Haul-Off R630/6V model, dates from 1990. Brand: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Ncjdpfxjrrv Uwj Altjw Voltage: 380 V Power: 4.5 kW Maximum pipe diameter: 110 mm to 630 mm