Dvojna poševna žaga

Elumatec DG 104

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 6.000 mm, Elumatic dvoglavna poševna žaga z dodatki, naprava za kratke reze, valjčna proga, upravljanje ECI-580 Isdszfaglspfx Abxeic

Leto izdelave: 1977, stanje: generalkompletno obnovljen (rabljeno), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivelling heads. Iisdpfsd N Rb Dsx Abxec Drilling heads included on both sides at the front. Very good condition. Available immediately.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Ponujamo pripravljeno za uporabo dvoglavo potezno žago Elumatec DG 104, letnik 1995. Stroj je povsem delujoč. Dolžina 6 m, 3 osi. Proizvajalec: Elumatec Model: DG 104 Letnik izdelave: 1995 Tip stroja: dvoglava potezna žaga Iedpfx Aboy Hpfvoxeic Za dodatna vprašanja ali informacije nam pišite ali nas pokličite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 193 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 480 mm, pomik po osi Z: 340 mm, največja širina rezanja: 335 mm, dolžina obdelovanca (maks.): 6.000 mm, največja hitrost rezkalne vretena: 6.000 obr/min, dolžina odseka (maks.): 6.000 mm, TECHNICAL DETAILS – Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control system: eluCAM graphical interface, Windows XP operating environment Workstations: 2 independently operating stations Revolver tool changer: 8 tools, servo-driven Tool holder: BT 30 Disc cutter diameter: 180 mm Tool length: 150 mm (measured from holder interface) Travel Paths X-axis travel: 7,200 mm (without end-face machining), 7,080 mm (with end-face machining) Y-axis travel: 480 mm Z-axis travel: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y/Z-axes: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electrical connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT - Two independent workstations with light curtain and camera system - Fixed angular milling head for 2 tools, ER20A, up to 18,000 rpm - Swivel angular milling head 4 × 90°, ER20, up to 22,000 rpm - Non-swiveling angular milling head for steel, ER20A, 1,554 rpm - Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts - Carbide-tipped saw blade Z=100, D=300 mm, kerf 3.2 mm - Tool holder i=1:3.86 for 18,000 rpm, ER25 - Cooling/lubrication unit for steel machining - Disc milling cutter holder BT30, D=16 mm - Disc milling cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS – Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable to 90° and 45° (interior); intermediate angles and acute 22.5° adjustable manually with digital display Iodpfewprmzsx Abxoic Cutting angle (tilt): pneumatically adjustable to 90° and 45° (interior) Sawing direction: saw blades move from bottom to top Control System Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic clamping Operating system: Windows Saw Unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 hp) Saw blade cooling: included Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electrical connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT - Automatically closing safety covers - Electronic positioning of heads with +/- 0.1 mm/m accuracy - Digital angle display for manually adjustable special angles - Pneumatically adjustable saw blade rotation and tilt angles - Operation via Windows control system with 8.4" display and handwheel - Saw blade cooling system included - Saw unit with bottom feed for optimal cutting force

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Iiedpfx Absx S Hmzjxoc Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier

Stanje: novo, Maximum welding current: 300 A Open-circuit voltage: 55 - 76 V Iodpfou Aw Shex Abxeic Supply voltage: 400 V Weight: 75 kg Dimensions (LxWxH): 950 x 560 x 880 mm Shielded gas welding machine: - with pulse function - 300 Ampere - 400 Volt - 3 m torch hose package - Earth cable - Wire feed rollers for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Kompletna linia do lakierowania parkietu Producent: SORBINI/VIET Iodpfxsrdgrvs Abxjic Rok produkcji: 2001 Wydajność: 800 m²/zmiana Czas jednego cyklu: 8 minut Długość linii: 42 m

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Iijdpfxewbknbj Abxjc Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Stanje: rabljeno, Leto izdelave: 1994, Tehnični podatki: Premer žaginega lista: 450 mm Število vrtljajev: 2820 min⁻¹ Največja dolžina reza: 5000 mm Najmanjša dolžina reza: 240 mm Potreben zračni tlak: 6-8 bar Premer izvrtine žaginega lista: 32 mm Kot reza v obe smeri: 45+90° Priključek za stisnjen zrak: 6–8 bar Skupna priključna moč: pribl. 4,6 kW Teža stroja pribl.: 1,1 t Dimenzije stroja (D x Š x V): pribl. 6,05 x 1,49 x 1,79 m Iijdpju Nigkefx Abxjc Dodatne značilnosti stroja: - Vpenjalna naprava: pnevmatska, vertikalna in horizontalna - Pnevmatska naprava za meglenje - Višinsko nastavljive noge stroja - Materialne podpore pomične skupaj z žago - Dvoročno upravljanje - Števec kosov Premer reza v skladu s tabelo reznim diagramom, saj je odvisen od hitrosti in žaginega lista. Hitrost rezanja pri 2820 obr./min in premeru lista Ø = 66 m/sec. Oprema: - 2 rezervna žagina lista

Stanje: novo, Leto izdelave: 2026, skupna dolžina: 1.450 mm, skupna širina: 800 mm, skupna višina: 1.800 mm, skupna masa: 500 kg, moč: 4,75 kW (6,46 KM), FC 120 ZK Working capacity: Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush belt dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush belt speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Isdpfxot D D Nzo Abxsic Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Current consumption: 12A, Dust extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg