Korrotačni dvopolžni ekstruder
COMAC SRL EBC 40HT/37D - 600rpm

Name: COMAC SRL EBC 40HT/37D - 600rpm
Brand: COMAC SRL
Price: 50000 EUR
Availability: InStock

FCA VB plus DDV

50.000 €

Leto izdelave

2004

Stanje

Rabljeno

Lokacija

Cerro Maggiore Italija

Korrotačni dvopolžni ekstruder COMAC SRL EBC 40HT/37D - 600rpm

Prikaži karto

Podatki o stroju

Oznaka stroja:: Korrotačni dvopolžni ekstruder

Proizvajalec:: COMAC SRL

Model:: EBC 40HT/37D - 600rpm

Številka stroja:: 40EV.118

Leto izdelave:: 2004

Stanje:: delavnici obnovljeno (rabljeno)

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

FCA VB plus DDV

50.000 €

Lokacija:: Via Legnano 57, 20023 Cerro Maggiore, Italia

Pokliči

Podrobnosti ponudbe

ID oglasa:: A21160102

Posodobitev:: nazadnje dne 04.02.2026

Opis

Twin-screw extruder model EBC 40HT/37D
Screw diameter: 42 mm
Main motor power: 51 kW
L/D ratio: 37
Center distance: 35 mm

The extruder consists of a base frame, a gearbox, and a distribution unit with special bearings designed to ensure optimal operation under a backpressure of up to 150 bar.

The barrel is a modular cylindrical type with a working length of 37 diameters, divided into eight segments. Each barrel segment is temperature-controlled via forced circulation of demineralized water through horizontally drilled channels in every module.

Heating is provided by cartridge heaters. The screws feature interchangeable segments and are mounted on splined shafts, allowing configuration for optimal processing based on requirements.

Barrels and screws are manufactured from highly wear-resistant steel.

The degassing system consists of a 1.5 kW liquid ring vacuum pump connected to the designated module through easy-to-clean piping; extracted gases are discharged into a dedicated trap for simple cleaning.

The drive includes a Siemens AC motor with 51 kW power, complete with inverter, mounted in a cabinet equipped with the required safety devices and status indicators.
Ledsyg Eghopfx Adkohd

The integrated control panel is divided into two sections: Power supply and temperature control.

The cabinet is equipped with an air conditioner.

The extruder includes a closed-circuit water/water temperature control unit (pump: 1.1 kW).

Chiller not included.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2026

1 Oglas na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+39 0331 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Berlin

713 km

Granulator
Tria80-40 TE-SL

Pokliči

Mali oglas

Breda

958 km

Ekstruder z dvojnim polžem
WeberDS 120

Pokliči

Leto izdelave: 1991, obratovalne ure: 32.000 h, stanje: generalkompletno obnovljen (rabljeno), • Ein Paar originale WEBER-Schnecken (ausgezeichneter Zustand, einschließlich Messprotokoll) • Ein Paar nicht-originale Schnecken • Getriebe von WEBER geprüft und teilweise überholt • Steuerung auf WPS-Steuerung aufgerüstet • Ausstoß auf PVC ca. 700 kg/Stunde Ledpfxowaxuae Adkehd

Poglej podrobnosti

Mali oglas

Kombinator / Dvojnopolžni ekstruder Leistritz ZSE 40 HP

Haan

811 km

Kombinator / Dvojnopolžni ekstruder
LeistritzZSE 40 HP

Pokliči

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dvojni polžasti ekstruder Ref. št.: DE27695 Proizvajalec: Leistritz Tip: ZSE 40 HP Leto izdelave: 2002 Premer polžev: 2 x Ø 40,0 mm L/D: 40D Pogon: 70 kW Podrobnosti: so-vrteči polži, segmentirani polži in valj, 1 x segment za stransko doziranje Možnosti: granulacija, doziranje, stranski dovajalnik Lhedpox Dip Tjfx Adkod Ponudba ne ustreza vašim željam? Obiščite našo spletno stran Plama Engineering ali nam pošljite podrobno povpraševanje – za skoraj vsak proračun imamo ustrezno rešitev.

Poglej podrobnosti

Mali oglas

Raitenbuch

431 km

Mill Rapid 20-48-KU
Rapid20-48-KU

Pokliči

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Please refer to the images and video for the condition and contents of the offer. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our website to view this and other available offers. The stated company names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data or errors in the item description may occur and are reserved. Lhedpfx Ajtudyqedkod

Poglej podrobnosti

Mali oglas

Dvojnij vijčasti ekstruder Leistritz ZSE40 Leistritz Extrusionstechnik GmbH ZSE40HP-36D

Velika Britanija

1.451 km

Dvojnij vijčasti ekstruder Leistritz ZSE40
Leistritz Extrusionstechnik GmbHZSE40HP-36D

Pokliči

Leto izdelave: 2015, obratovalne ure: 36.000 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Including die head with 6 holes Including Brabender volumetric dosing unit Previous application: MB ABS, PP & PE, up to 120 kg/h Lhsdpfsx Sq I Nex Adked Operating hours: approx. 36,000 h Please refer to the pictures and video for the condition and scope of supply. The system is currently located in England. The equipment is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to see our other offers as well. The stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Poglej podrobnosti

Mali oglas

3d tiskalnik SERON Ploter Drukujący 3D Print

Stalowa Wola

714 km

3d tiskalnik
SERONPloter Drukujący 3D Print

70.000 €

VB plus DDV

Pokliči

Stanje: novo, Leto izdelave: 2026, Technical data Control system: multi-axis real-time interpolator with active trajectory prediction. LAN and EtherCat communication, sampling time below 1 ms, correction map, RTCP, remote service access. Working area: 1500–3000 x 2100–12000 mm Z-axis clearance: 500–1200 mm Drive system: Servo drives with EtherCat protocol, X and Y axes with hardened, ground helical racks, accuracy class 6; Z-axis with ball screw, accuracy class 5 Linear bearings: trapezoidal rails Travel speed: X, Y up to 45 m/min; C, A up to 6000°/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: dual-sided master/slave with gantry angle correction Print heads: - G.12 with output up to 12 kg/h - G.20 with output up to 20 kg/h - G.50 with output up to 50 kg/h - G.200 with output up to 200 kg/h Construction: welded steel, ribbed, stress-relieved, precision machined We have extensive experience with various materials including: Lhsdpfx Adjv Ramgsked Basic materials: PE, PP, ABS, PLA, PA, PC, PET, etc. Advanced materials: PPS, PEEK, PEKK, etc. Reinforced materials: carbon fibre, glass fibre, natural fibres.

Poglej podrobnosti

Mali oglas

Drobilnica Młyn rozdrabniający / grinder granulator do tworzyw sztucznych

Rimini

300 km

Drobilnica
Młyn rozdrabniający / grindergranulator do tworzyw sztucznych

5.900 €

Fiksna cena plus DDV

Pokliči

Stanje: dober (rabljeno), We have 2 cutting mills / granulators for sale (the price refers to granulator no. 2). The machines were used for cutting plastic but can also be used for other synthetic materials. Both are equipped with liquid cooling systems. Technical data (granulator no. 1): - Dimensions: 150 x 115 cm / Height: 210 cm - Rotor diameter: 36 cm - Rotor/blade width: 55 cm - Number of blades: 3 (Fixed blades positioned at an angle, which significantly reduces resistance during cutting and shredding, resulting in more efficient operation.) - Feed opening: 30 x 53 cm - Motor: 22 kW / 30 hp - Liquid cooling system Lhedpfx Aeuw Skhedksd Technical data (granulator no. 2): - Dimensions: 150 x 125 cm / Height: 180 cm - Rotor diameter: 25 cm - Rotor/blade width: 52 cm - Number of blades: 3 - Motor: 22 kW / 30 hp - Liquid cooling system Prices: Granulator no.1 – €7,200 Granulator no.2 – €5,900 Both units: €11,900 TAG: plastic mill, shredder, plastic recycling, plastic cutting machine, industrial mill, cutting blades, plastics granulator, industrial machine, cooled mill, recycling machine

Poglej podrobnosti

Mali oglas

Lödige FKM1200D plugasti mešalnik Lödige FKM1200D

Hradec Králové 4

456 km

Lödige FKM1200D plugasti mešalnik
LödigeFKM1200D

Pokliči

Stanje: rabljeno, Rabljeni Lödige model FKM1200D serijski nerjaveči vodoravni hitri mešalnik - homogenizator za praškaste zmesi. Proizvajalec: Lödige Model: FKM1200D/2MZ/2ZF Material: nerjaveče jeklo Kapaciteta: 360-840 litrov delovne prostornine, 1200 litrov skupne prostornine (odvisno od izdelka) Posoda: 1700 mm dolžina x 950 mm premer, 2x inšpekcijska odprtina 540 mm dolžina x 400 mm višina Tip praznjenja: Pnevmatsko upravljan osrednji pravokotni izpustni ventil Tip mešal: plugasti mešalni rezili Motor: 25/36 kW, 730/1465 obr./min, 380 V električni motor z reduktorjem Vključuje še: - 2x disintegrator mešane zmesi, ki ju neposredno poganjata elektromotorja 7,5 kW, 2930 obr./min, 380 V - Nadzorna plošča - regulira čas mešanja, zagon/ustavitev mešalnih rezil, zagon/ustavitev disintegratorjev, odpiranje/zapiranje polnilnega ventila, odpiranje/zapiranje izstopnega ventila. Lhodpox R S Ubjfx Adksd

Poglej podrobnosti

Mali oglas

Droilnik plastike 30 kW Crusher for plastic 30kw model 800

Krnule

410 km

Droilnik plastike 30 kW
Crusher for plastic 30kwmodel 800

8.499 €

EXW Fiksna cena plus DDV

Pokliči

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Mlin za plastiko z močjo motorja 30 kW, rotor širine 800 mm, zmogljivost do 1 t toge plastike, 500 kg/h za folijske materiale. Primeren za drobljenje materialov PP, PE, PVC, ABS ipd. Opremljen s 6 rotacijskimi in 4 fiksnimi noži. Mlinčki so preizkušeni v naši proizvodnji v dejanskem 24/7 industrijskem delu. Zelo enostavno odpiranje in menjava nožev. Velikost sita 12 mm. Električna omarica vključena. Zelo močen in zmogljiv stroj. Po želji možna dodatna namestitev ventilatorja in silosa za popolnoma avtomatsko delovanje. Rezervni noži in sita na voljo. Za več fotografij in video med delovanjem kontaktirajte preko WhatsApp. Lsdpoychdhofx Adkohd

Poglej podrobnosti

Mali oglas

Kompaund linija z dvojnim vijačnim ekstruderjem Twin screw extruder with hot and cold PB-65 twin screw extruder

Krnule

410 km

Kompaund linija z dvojnim vijačnim ekstruderjem
Twin screw extruder with hot and coldPB-65 twin screw extruder

84.990 €

EXW Fiksna cena plus DDV

Pokliči

Stanje: novo, Leto izdelave: 2023, obratovalne ure: 300 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 2.880 mm, moč vretenovega motorja: 90.000 W, vrsta vhodnega toka: trifazni, Naprodaj nova linija za kompaundiranje s realno kapaciteto 300 kg/h. Linijo sestavljata topli in hladni mešalnik, dvojnopolžni ekstruder (2 twin screw extruder) z dvema točkama za doziranje – na začetku polža in s strani, kar je primerno za visoko polnjenje s suhimi snovmi, vakuumska črpalka, hidravlični menjalnik sita, vibracijska miza in silosi za shranjevanje materiala. Linija lahko predeluje materiale v prahu, trde materiale, različne mletine, miksate, granulata PP, PE, PVC. Možna je proizvodnja kakovostnih masterbatch mešanic, polnil in ostalih produktov. Lhodpfx Adex Uqyqjked Do 85 % suhe snovi. Stroj je praktično nov, preizkušen le nekaj ur. Upravljanje preko frekvenčnih regulatorjev. Ob liniji prejmete komplet rezervnih delov, rezervne grelce in rezervne segmente za polžno vreteno. Možnost preizkusa z vašim materialom.

Poglej podrobnosti

Oglašujte tukaj