Bernardo Tovarna Za Peskanje nakup rabljenega (84.792)

Stanje: potreben popravila (rabljeno), Leto izdelave: 2008, obratovalne ure: 4.000 h, Funkcionalnost: omejena funkcionalnost, Stroj za peskanje plošč in europrofilov. Isdpfx Asvgbcusl Neia Delovna širina: 2,6 m, delovna višina: 0,5 m. Dovodni in izhodni motorizirani valji po 12 m. Stroj je v delujočem stanju, vendar potrebuje strokovnjaka za določene obnove. Že izvedene obnove: - nov motor za odsesovalni ventilator - nova rezila turbine - zaščitne plošče v notranjosti skoraj kot nove - nov jermenski trak dvigala - nova sklopka med eno turbino in motorjem Potrebna popravila: - elektro omara (stroj že deluje z novim krmilnim sistemom, stara krmilna plošča ni nastavljena in ni funkcionalna) - popravilo krtače (obstaja, a je v okvari – trenutno je ne uporabljamo) - električne povezave in senzorji (nekateri so vgrajeni, vendar se jih ne uporablja)

Leto izdelave: 2025, stanje: novo, Stock No. 2846 Compounding Extruder Type: Alphatec AD-S 75 with: Segmented screws, co-rotating, intermeshing, Cylinder water-/media-cooled/temperature controlled Throughput up to 1,200 kg/h (depending on material) Drive: 250 kW AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders Type ZS-B Siemens control with touch HMI Ijdpod Hqa Iofx Al Noia OPTIONAL: > Melt filter / screen changer > Pelletizing systems: strand pelletizer (ST), water ring (WRG) or underwater pelletizer (UWG) > Screw configuration to your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled by arrangement.

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Stock No. 2846 Compounding Extruder Type: Alphatec AD-S 75 with: Segmented screws, co-rotating, intermeshing, Cylinder water-/media-cooled/temperature controlled Throughput up to 1,200 kg/h (depending on material) Drive: 250 kW AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders Type ZS-B Siemens control with touch HMI OPTIONAL: > Melt filter / screen changer Isdpoi Dtbiefx Al Noia > Pelletizing systems: strand pelletizer (ST), water ring (WRG) or underwater pelletizer (UWG) > Screw configuration to your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled by arrangement.

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, ID skladišča 2846 Compounder ekstruder Tip Alphatec AD-.S 75 z: segmentnimi polži, so-vrteči, tesno prilegajoči, cilindrično vodno ali medijsko hlajeni/gretji zmogljivost do 1200 kg/h – odvisno od materiala pogon 250 kW – AC 48 L/D R+W varnostna sklopka 3x cona za odplinjevanje – 1x vakuumska črpalka 2x bočna dozirnika tipa ZS-B Siemens HMI Touch krmiljenje IZBIRNO: > Filtrir/menjalnik sita za staljena masa > Sistem granulacije: Strang ST-, vodni obroč WRG ali podvodna granulacija UWG > Konfiguracija polža po vaših zahtevah > Doziranje materiala: volumetrično ali gravimetrično > Dodatna oprema Iiodpfx Aloi Dtbuo Nja Obiščite nas v naši tovarni v Wuppertalu. Oprema je pripravljena za predstavitev. Testni zagon z vašim materialom je možen po dogovoru.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 2.846 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Stock no. 2846 Compounding Extruder, ready for demonstration: Type Alphatec AD-.S 75 with: - Screw diameter 72 mm - Segmented screws, co-rotating, fully intermeshing, barrel water-/media-cooled/temperature-controlled - Output capacity up to 1,200 kg/h (material-dependent) - Drive 250 kW AC - 48 L/D - 3x degassing zones; 1x vacuum pump with condensate separator - 2x side feeders type ZS-B - Siemens HMI touch control system OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand (ST), water ring (WRG), or underwater pelletizing (UWG) > Screw configuration as per your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The machine is ready for demonstration. Test runs with your material can be arranged upon request. Iijdji Dtbqopfx Al Noa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 8.500 h, Rösler ST 700 PS Blasting System TECHNICAL DATA Year of manufacture: 2012 Operating hours: Approx. 8,500 h System width: 1,270 mm System depth: 1,050 mm System height: 1,640 mm Blasting chamber width: 740 mm Blasting chamber depth: 760 mm Blasting chamber height: 490 mm Blasting gun / air nozzle diameter: 2-3 mm Blasting gun / blast nozzle diameter: 6.5 mm Iijdpjwf Hmbjfx Al Nea Nozzle material: Ceramic or boron carbide Air requirement at 5 bar / hour: 13 – 30 m³/h Filter surface area: 2.5 m² Extraction capacity: 150 m³/h Fan power: 0.25 kW SCOPE OF SUPPLY Includes (not an exhaustive list): - Rösler blasting system - Container / basket - Extraction / filter system Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness, or currency of the information provided.

Stanje: rabljeno, Leto izdelave: 2005, Sandblasting machine, blasting unit, sandblasting cabinet, sandblasting device Iijdpfxoryak Tj Al Nsa - Manufacturer: Güde, Blasting Unit/Sandblasting Cabinet Type P1 - Internal chamber: 580/480/H295/350 mm - Air demand: 150 l/min / Pressure: 6 bar - Dimensions: 690/480/H490 mm - Total weight: 38 kg

Stanje: zelo dobro (rabljeno), Shot blasting machine, continuous blasting machine, wear plates, blast wheel disc -Spare and wear parts: for shot blasting machine, continuous blasting machine -Impact plates: 02122 V105, 7 pieces, dimensions 390/125/H145 mm, 11.7 kg/pc -Impact plates: C1315 N517, 2 pieces, dimensions 480/140/H175 mm, 15 kg/pc -Blast wheel discs: 02122 V105, 16 pieces, dimensions 350 x 80 mm, total 112.5 kg -Accelerator gear units: 4 pcs, Ø 250 x 320 mm, 27 kg/pc -Conveyor shafts: 3 pieces, Ø 80 x 1640 mm, 40 kg/pc Iiodswaiv Uepfx Al Nsa -Sale/Price: complete package -Total weight: 452.4 kg

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.320 mm, skupna širina: 1.600 mm, skupna dolžina: 1.600 mm, moč: 15 kW (20,39 KM), SPYRA drobilnik ostružkov - Za drobljenje ostružkov s tujki - Po želji z garancijo! - Popolnoma pripravljen za uporabo - Tujki v ostružkih pri tem stroju niso težava, saj je bil posebej zasnovan in patentiran prav za ta namen. Zmogljivost: Iisdpow N Rv Tsfx Al Noa 0,6 - 1,2 m³ / uro Količina pretoka je odvisna od vrste materiala, njegove sestave in števila tujkov.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen,

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, skupna masa: 68 kg, pritisk: 10 letvica, vhodna napetost: 230 V, dolžina paketa cevi: 5.000 mm, CRYONOMIC COB62+ maszyna do czyszczenia suchym lodem. Maszyna pokazowa używana przez dystrybutora w Polsce do celów demonstracyjnych, stan jak nowy. Przepracowane ok. 20 godzin pokazów. W zakresie dostawy: urządzenie, wąż 5 m, pistolet ze standardową dyszą. Maksymalne ciśnienie robocze: 10 bar. Zużycie powietrza: 0,5 – 5,5 m³/min. Zużycie suchego lodu: 20 – 80 kg. Możliwość zastosowania dodatkowego modułu ściernego do bardziej agresywnego czyszczenia. Możliwość zastosowania oświetlenia LED do pistoletu. Prosta i niezawodna obsługa oraz konstrukcja oparta na ponad 30-letnim doświadczeniu w produkcji sprzętu do czyszczenia suchym lodem. Isdpfxeq Rvako Al Nsia Wyprodukowane w Belgii.

Stanje: novo, Leto izdelave: 2025, Blast room 12x5m with blasting trolley and flat conveyor floor. Flat conveyor floor, screw trench, bucket elevator, magnetic separator, reclamation unit, material bunker, abrasive replenishment system, free-jet pressure blast fan, filtration system with cleaning mechanism. Walls lined with 4mm fabric-reinforced rubber sheeting. Iededhlikopfx Al Neia For any technical inquiries or further information, please contact us in writing or by phone. The machines are manufactured at our Grossenlueder facility since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing, well-known contact persons.

Stanje: novo, Leto izdelave: 2025, Blast wheel machine, suspended rail type 1.15 2T Working area: Diameter = 1000 mm, Height = 1500 mm, Payload = 500 kg Equipped with 2 blast wheels, each 7.5 kW, including filter system and airborne dust filter. For questions regarding technical specifications, please contact us in writing or by phone. Iiodpfxjdrr U Se Al Nja The foundation of our machines is the manufacturing facility at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts.

Stanje: novo, Leto izdelave: 2026, Tumble belt blast machine with blast wheel – 7.5 kW direct-drive disc turbine with 8 throwing blades. Belt width 700 mm and diameter 600 mm. Iodpfx Aeg S Rt Esl Nsia

Stanje: novo, Bag opener, suitable for opening bagged materials such as 'Gelber Sack' (yellow bag) and similar. Can be used as a stand-alone unit or integrated as a component in, for example, a sorting plant. Throughput: 6-7 t/h Drive power: approx. 18 kW Iiedpfx Asdxwlzjl Nsa Dimensions: 8000 x 2350 x 2700 mm Weight: 11 t Made to order Delivery time approx. 30 weeks Further data and quotation available upon request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 13.937 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5942029, višina izdelka (maks.): 600 mm, največja širina izdelka: 1.500 mm, TECHNICAL DETAILS Iiedpfjwlpdvsx Al Nsa Pass-through width: 1,500 mm Pass-through height: 600 mm Workpiece length: min.: variable Turbines and Drive Number of turbines: 4 units Power per blast wheel: 11 kW MACHINE DETAILS Total power consumption: approx. 80 kW Operating hours: approx. 13,937 h Dimensions: 17,940 x 3,648 x 6.38 h EQUIPMENT - Pass-through shot blasting machine with roller conveyor - 4 blast wheels, each with 11 kW - Roller conveyors for infeed and outfeed (approx. 12 metres in total, each segment approx. 6 metres length)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, For sale: Complete raw material yard imported from Germany, available for collection in Osła near Bolesławiec. Manufacturer: Holtec + Falcone (Germany) Processing diameter range: 14 to 65 cm Processing length range: 2.0 m to 15 m The sale includes a large stock of spare parts for the sorting line, such as chains, gearboxes, motors, and cables. The raw material yard consists of: • Long log infeed conveyor • 2 x Short timber infeed conveyors • Kesla crane at the feed table for aligning logs Iedpfx Asvcqi Aol Njia • Complete operator station (cameras, monitors, computer) • Sorting system software • Log scanner for sorted material volume • Falcone 550 debarker, year 2014 • Cross-cut saw, 1600 mm blade diameter • Metal detector, max diameter 650 mm • Single storage bins: 44 units • Bark removal system under the debarker • Waste removal system for cross-cutting residues • Automated control system, with full optimization according to specified parameters • Line capacity: up to 300,000 m³ per year on two-shift operation

Stanje: zelo dobro (rabljeno), Here we offer a used Datona Mobile Sandblasting Unit. Datona Mobile Sandblasting Unit DUO - 74 Liter SKU DT-55212 Pros and Cons: - 2.5 m long hose for extended range - Easy switching between blasting media thanks to the mixing valve - When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting unit is used for removing paint and rust. Thanks to the two tanks, you can choose between two different blasting media. The mobile sandblaster operates with a pressure of 4 to 8 bar and requires a compressor with a minimum intake capacity of 350 l/min. Dual Tank: If blasting with soda or calcium carbonate does not achieve the desired result, simply switch to a different blasting medium. For a more effective operation, it is also possible to use both media at the same time. With this sandblasting unit, you get a practical machine for your workshop. With the special mixing valve you can gently and easily remove paint from steel, stainless steel, chrome, aluminium, or polyester using soda. A major advantage of blasting with fine soda is that the surface of the object being blasted is not damaged. You do not even need to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop and on-site. Please note: One of the tanks is exclusively suitable for soda and calcium carbonate! ✓ Duo sandblasting unit ✓ 74 litre tank capacity ✓ Air consumption approx. 350 l/min Iijdpfoqcuvwox Al Noa Technical data: SKU: DT-55212 Weight: 33 kg Suitable blasting media: - Aluminium silicate - Dato-Blast calcium carbonate - Soda Blasting cabinet connection: 1/4" Max. pressure: 2 – 6 bar Minimum air consumption: 350 l/min Minimum compressor tank capacity: 100 litres Type: DT-55212 Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please do not hesitate to contact us by phone.

Stanje: rabljeno, Leto izdelave: 2024, obratovalne ure: 30 h, skupna višina: 5.380 mm, skupna širina: 4.170 mm, skupna dolžina: 5.250 mm, RECU UZ 2000 Univerzálny drvič v otvorenom vyhotovení. Výrobca: Recuperma Typ: RECU UZ 20000 Obzvlášť vhodný na šetrné a rýchle rozkladanie kompozitných materiálov, rozpojenie a znižovanie objemu. Princíp práce: - Použitie flexibilných úderových prvkov - Drvenie nárazovým účinkom vloženého materiálu - Drvenie na rôzne zrnité frakcie Výkon: Hodinový výkon závisí od veľkosti zrna a objemovej hmotnosti spracovávaného materiálu. Technické údaje (±5 %): Pohonný výkon: 250 kW, cca 1490 ot./min. Pohon: remeňový prevod Isdpfx Alsv U Ttbs Nsia Vedľajší pohon: hydraulická jednotka cca 1,5 kW Riadenie: SIEMENS Frekvenčný menič značky SEW Priemer bubna: 1900 mm Hmotnosť: 25 t Obloženie opotrebovateľnými plechmi HB450 Podávanie materiálu cez násypku Reťazový záves ako ochrana proti vyhadzovaniu častí Výstup materiálu cez posuvné dvere Stroj je momentálne nefunkčný. Cena platí pre opravený stroj. Cena bez opravy: 370 000 €. Doprava nie je zahrnutá v cene.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 3.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 111549, potreba po zraku: 6 m³/h, obratovalni tlak: 6 letvica, skupna širina: 1.300 mm, vrsta vhodnega toka: trifazni, notranja dolžina: 8.000 mm, - Leto izdelave 2024 - Delovne ure stroja: 2000h - Mrežni transporter izdelan iz mangana, širina 1000 mm - Nastavljiva hitrost traku transporterja - 4 turbine z močjo 11 kW, tip Rutten Gamma 330 HD - Nemotena regulacija vrtljajev turbin - Komora Hot Spot izdelana iz manganovega in orodnega jekla - Samodejno zaznavanje delov - Samodejna regulacija pretoka abraziva - Samodejno polnjenje abraziva Iiodpewvgbgjfx Al Noa - Samodejno odpihovanje delov - Odsesovalni sistem Rosler BF 40/40 - Izdelan stroj omogoča delo z medijem najvišje trdote GH z ostrimi robovi. - Rezila turbin iz sintranega karbida zagotavljajo 30.000 ur delovanja - Ohišja turbin iz sintranega karbida nudijo še večjo zaščito pred obrabo stroja

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: električni, Leto izdelave: 2010, številka stroja/vozila: 10FI012DA, OPREMA ZA PRODAJO Avtomatska vibropreša – proizvodna linija FORM IMPIANTI FI 1200 DA Na voljo je popolna avtomatska proizvodna linija za vibro stiskane betonske izdelke italijanske izdelave, skupaj z betonarno ter celovitim naborom kalupov, orodij in pomožne opreme. Proizvajalec & Identifikacija Proizvajalec: FORM IMPIANTI S.p.A. (Italija) Model: FI 1200 DA Serijska št.: 10FI012DA Tip: Avtomatska vibropreša – proizvodna linija Kapaciteta: do 1.900 m² na 8-urni izmeni / deb. 6 cm CE skladnost: DA Celotna tehnična dokumentacija: DA Glavna oprema (proizvodna linija) Vibropreša FORM IMPIANTI FI 1200 DA Avtomatski sistem za manipulacijo palet Skladiščne enote (stackerji) Avtomatski transportni sistem (transboarder + transmanipulator) Primarni sistem za zorenje (regalno zorenje) Sistem za depaletizacijo in paletizacijo Centraliziran PLC krmilni sistem Hidravlična enota s hlajenjem POPOLN SEZNAM KALUPOV, ORODIJ IN ZALOGE (vključeno v prodajo) Kalupi za vibro stiskane izdelke Parking rešetka 40×40×10 cm Kalupi za plošče 30×30×5 cm (več kompletov) Kalup za plošče 40×40×5 cm Kalup za plošče 40×40×4 cm Kalup za taktilni / vodilni trak 250×500×100 mm Kalupi za robnike: 15×25×50 cm 50×35×18 cm 15/18×25×50 cm Kalupi za tlakovce: 10×10×6 cm (81 kos) 10×10×8 cm (81 kos) 20×10×6 cm (45 kos) 20×10×8 cm (45 kos) Dvot T / Behaton kalupi: deb. 6 cm deb. 8 cm Parking rešetka 40×40×10 cm Orodja za vtiskovanje: 200×200 mm 300×300 mm (taktilne plošče) Pomožna in tehnološka oprema Vijačni kompresor Genesis – 15 kW Sistem za recikliranje betona TRS-15 Sistem za tehtanje kemičnih dodatkov Merilnik vlage Črpalke: Pedrollo SAER (več modelov) Vijačna črpalka Stroj za trakiranje ZAPAK Vibrator DINGO Betonska posoda – 500 l Klimatska naprava za kabino operaterja in proizvodne prostore Iedpfx Ajydqrqsl Noia Stanje Linija je vgrajena in v obratovanju Vidno dobro vzdrževana Primerna za: takojšnje obratovanje demontažo in preselitev modernizacijo / nadgradnjo Prodaja kot celoten paket ali posamezne dele Ogled na lokaciji možen Demontaža in transport – po dogovoru

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: MS 1153, Technical data (approximate): - Access opening to blasting chamber: W 370 x H 170 mm - Blast nozzle - Door opening to blasting chamber - Blast media pressure vessel Iijdsllvr Dopfx Al Nja - Blast media recovery system - Separate control panel - Space requirement for blasting unit: 1600 x 2000 x H 1750 mm - Space requirement for blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with extraction fan MUNK - SCHMITZ - Air volume: 700 - 1500 m³/h - Extraction fan: 3 kW - Space requirement for filter unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Leto izdelave: 2026, stanje: novo, The washing elevator milling system is constructed from stainless steel. First, the machine operator pours fruit and vegetables with clean water into the washing tank. A conveyor belt lifts the products up to the mill. During the lifting process, water nozzles spray the fruit and vegetables with clean water. The machine grinds the fruit and vegetables into pulp. Finally, the fruit and vegetable pulp exits the mill. Output: 3,000 kg/h. - The machine's grinding head is round, ensuring that all processed pulp flows directly out for further processing. This feature greatly aids in cleaning the head, as there are no corners. Our round-shape technology surpasses that of other manufacturers, as a significant amount of pulp can remain in the corners of square heads for hours, causing juice fermentation! - The machine includes an additional table in front of the tank for placing fruit or crates, making it easier to load products into the tank. - The V-shaped washing tank helps direct fruit and vegetables onto the conveyor, minimizing product remaining in the tank. - The integrated water spray system provides additional washing when fruit is lifted onto the conveyor belt. - The belt conveyor is equipped with a water drainage and speed control system. - Conveyor belt speed can be adjusted from the control panel. - Optional interchangeable graters/screens are available for various fruits and berries. Ijdpfx Aoflpmkjl Noia - The mill does not damage fruit seeds. - The machine is easy to clean after use. - The powerful 2.2 kW grinding motor can process a variety of fruits, berries, and vegetables – from soft raspberries to hard apples, beets, etc. The entire machine is made of stainless steel.

Leto izdelave: 2026, stanje: novo, The washing and elevator milling system is constructed entirely of stainless steel. The operator first pours fruit and vegetables, together with clean water, into the washing tank. A conveyor belt lifts the produce to the mill. During this elevation process, water nozzles spray the fruit and vegetables with clean water. The machine then mills the produce into mash. Finally, the fruit and vegetable mash exits from the mill. Capacity: 1,000 kg/h. - The machine’s milling head is round, so all of the crushed mash is discharged directly for further processing. This feature significantly facilitates cleaning the head because there are no corners. Our round-shape technology outperforms other manufacturers, as substantial amounts of pulp can remain for hours in the corners of square heads, causing juice fermentation! - The machine is equipped with an additional table in front of the tank for placing fruit or crates, making it easier to load produce into the tank. - The V-shaped washing tank directs fruit and vegetables straight onto the conveyor, minimizing leftover produce in the tank. Iiodpfx Aoflpfbsl Nea - The integrated water spray system provides additional washing as the fruit is lifted onto the conveyor. - The belt conveyor features a water drain and speed control system. - Conveyor belt speed can be adjusted via the control panel. - Optional interchangeable graters/screens are available for various types of fruit and berries. - The mill does not damage fruit seeds. - The machine is easy to clean after use. - The powerful 2.2 kW milling motor can process a wide range of fruits, berries, and vegetables—handling anything from soft raspberries to hard apples, beets, and more. The machine is constructed entirely of stainless steel.

Stanje: novo, ⭐⭐⭐⭐⭐ (5.0) 27 reviews ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Free shipping: 10-day delivery ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ ✨Sandblasting Set with Pressure Vessel✨ ⭕ Outdoor sandblasting, indoor sandblasting, and applications where mobile sandblasting machines powered by compressed air are used. ⭕ Pressure Sandblasting Vessel Technical Specifications: ✔ Working pressure: 7 bar ✔ Abrasive type: Steel grit, steel shot, garnet, glass bead (glass sand), etc. ✔ Air consumption: see table below for L/min values. ❓What is a pressure sandblasting vessel?❓ ✨A pressure sandblasting machine is a type of sandblasting equipment that can be deployed as a mobile unit for blasting non-portable surfaces (e.g., buildings, large steel structures) outdoors. Sandblasting rooms can also be used for blasting large components. Since it operates with compressed air, a compressor is required. ✨At Proton, we offer standard sandblasting vessels in 50 L, 100 L, and 200 L capacities. In addition, we can supply blast vessels in various sizes according to your requirements. ✨All spare parts and accessories are available from our company. We offer sandblasting helmets, sandblasting gloves, sandblasting hoses, and boron carbide blasting nozzles to ensure the operator is not affected by the surrounding environment. ⚡️Typical Applications of Sandblasting Vessels⚡️ This system is used to achieve the required surface profile prior to painting and coating, and in areas where cleaning and decorative finishes are desired. Main applications include: shipbuilding, foundry industry, automotive, marble, textile, glass, pipe, fabrication, and assembly industries. ✳️Standard blast vessel sets are supplied with the following equipment:✳️ SAND BLASTING VESSEL 200 L ►1x blasting control valve ►1x remote control valve ►1x quick silencer ►1x water separator regulator ►1x remote control handle ►1x abrasive flow diverter "Y" fitting Iodpfx Asfvqixsl Nsia ►1 set quick-connect couplings ►20 meters blast hose ►40 meters dual pneumatic hose ►1x 8 mm Venturi nozzle ►1x 39 mm nozzle holder (MHE-1) ►1x sandblasting helmet ►1x coverall ►1 pair gloves ►1x sandbag ►1x air supply manifold with 2 outlets ►20 m breathing air hose and coupling sockets ❗❗❗ Recommended Compressor Specifications for Sandblasting Vessel Motor power: 37 kW - 50 HP, Airflow: 6.25 m³/min, 7-8 bar pressure. A compressor with these features is required. It is recommended to use a screw compressor. ❗❗❗