Berg & Schmid Junior 275 nakup rabljenega (2.440)

Stanje: rabljeno, Technical details: Djdpfx Ansvb Amqsuocn Diameter: 200 mm Weight: 4 kg These are 2 heads, size 1, with an adjustment accuracy of 0.02 and 0.05 mm Taper: MK 4 and MK 5

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Blade speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double miter metal band saw, frequency inverter hydraulics, semi-automatic GBS 250 Super HA-I Easy • Miter cutting left 60° / right 45° Dcsdpfofn Andjx Anusn • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece – very quiet and low vibration operation • Hydraulic vise, laterally adjustable • Precision industrial-grade bearings • Heavy-duty vise and cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Feed pressure regulator • Support roller (infeed side) • Ball-bearing mounted turntable Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to material start, or proceed directly with cutting for serial cuts 4. Stop saw blade 5. Raise frame just above the material 6. Open vise

Stanje: novo, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangular 610 x 450 mm Saw blade length 5320 x 34 x 1.1 mm Blade speed 15 - 100 m/min Table height 820 mm Total power requirement 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height sensor (automatic cut start detection) Automatic feed unit via ball screw incremental feed with automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure switch-off in idle mode Mechanical swarf removal brush, feed vice opens on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple cutting jobs with various cutting lengths and quantities. Dcsdpfx Aefu Nbbonusn Automatic feed unit, 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. Fully hydraulic control of saw frame and clamping devices Selection of 3 different material feed rates Visualization of the entire workflow with simple data entry

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 35 + 70 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx. 0.24 t Space requirement approx. 1.2 x 0.6 x 1.7 m SPECIAL PRICE!!! -Mitre cuts up to 60° left -Cutting speed 35 / 70 m / min -Vice with quick-release device -Carbide saw band guides -Band tension control -Electric cooling system Auto-Cut System = 3-stage system -Automatic saw frame lowering via hydraulic cylinder -Infinitely variable feed adjustment -With limit switch -Rapid lowering of the saw frame from resting position to the workpiece, Dcedpfod Iip Uex Anuon then switch to normal feed rate -Manual operation Freight charge: EUR 85,-

Stanje: rabljeno, Saw blade diameter: 530 mm Cutting capacity at 90°: round 180 mm Cutting capacity at 90°: square 170 mm Cutting capacity at 90°: flat 380x70 mm Cutting capacity at 45°: round 180 mm Cutting capacity at 45°: square 150 mm Cutting capacity at 45°: rectangular 290x70 mm Total power requirement: 2.2 kW Machine weight approx. 350 kg Dimensions (L x W x H): 1.1 x 0.9 x 1.5 m Under-table aluminium circular saw, hydropneumatic semi-automatic. - Maintenance unit for pneumatic control - Ball-bearing rotary table - Extraction port for chip extraction system - 2 pneumatic vertical clamps - Swivel range 180° - Adjustable rear material stop = extendable cutting area - Infinitely variable saw blade feed - Two-hand safety control - Horizontal clamps (option) Dedpfxed Iinwo Anujcn - Micro-mist spray system for cooling emulsion - Motor brake - Machine base - For cutting profiles, use of our B & S Coolmatic Plus is mandatory - Saw blade optional

Stanje: rabljeno, Saw blade diameter: 350 mm Cutting range at 90°: round 120 mm Cutting range at 90°: square 110 mm Cutting range at 90°: flat 200 x 88 mm Cutting range at 45°: round 115 mm Cutting range at 45°: square 110 mm Cutting range at 45°: rectangular 150 x 80 mm Dcedpfx Anod Iin Ajuen Total power requirement: 1.5/1.8 kW Machine weight approx. 0.27 t Dimensions (L x W x H): 1.1 x 0.95 x 1.7 m - Hydropneumatic semi-automatic machine - Mitre cuts left/right 45° - Saw head tilting cuts up to 45° (inclined cuts) - Ball-bearing table - Pneumatic double clamping device - Machine base with mist spray device - Chip extraction nozzle on saw blade guard

Stanje: rabljeno, Saw blade diameter: 400 mm Cutting capacity at 90°: round 110 mm Cutting capacity at 90°: square 100 mm Cutting capacity at 90°: flat 200x60 mm Cutting capacity at 45°: round 100 mm Cutting capacity at 45°: square 100 mm Cutting capacity at 45°: rectangular 140x60 mm Total power requirement: 1.5 kW Machine weight: approx. 130 kg Dimensions (L x W x H): 0.8 x 0.7 x 1.3 m SPECIAL PRICE!! Underfloor aluminium circular saw, hydro-pneumatic semi-automatic. · Maintenance unit for pneumatic control · Ball bearing rotary table · Extraction nozzle for chip extraction system · 2 pneumatic vertical clamps · 180° swivel range · Adjustable rear material stop = extendable cutting range · Stepless adjustable saw blade feed · Two-hand safety control · Horizontal clamps (option) · Mist spray unit for coolant emulsion · Motor brake · Machine base frame · For profile cutting, the use of our B & S Coolmatic Plus is mandatory Dcjdpfx Anod Iinxjujn · Saw blade optional

Stanje: rabljeno, Saw blade diameter 350 mm Cutting range at 90° (round): 120 mm Cutting range at 90° (square): 110 mm Cutting range at 90° (flat): 200 x 88 mm Dcjdpfjd Iinzsx Anusn Cutting range at 45° (round): 115 mm Cutting range at 45° (square): 110 mm Cutting range at 45° (rectangular): 150 x 80 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.59 t Dimensions (L x W x H): 1.9 x 1.4 x 1.8 m Hydropneumatic fully automatic machine · Miter cutting left/right · Head angle cuts up to 45° (tilting head) · Hydro-pneumatic saw head control · Pneumatic double clamping device · Pneumatic vertical clamping device · Electro-pneumatic material feed unit with material hold-down · Vernier scale for fine length adjustment · Integrated coolant spray unit · Chip extraction nozzle on saw blade guard · Minimum remnant length in automatic operation: 210 mm MPS control system: · Storage of cut start/end · Displays current draw, piece count, cutting time, etc. · Adjustable water cooling · Cutting pressure regulator

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Band speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column double mitre bandsaw for fast cutting with Pusher System P15. Option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures seamless interaction of linear encoder and self-braking positioning motor in combination with reliable hydraulic braking via large-radial centre positioning. The work table is mounted on high-quality preloaded bearings, which ensure extremely smooth rotation. CNC control A CNC control enables programming of up to 90 cutting programs Dcsdpfx Ansfg E Hnoujn with different cutting lengths, quantities and mitre angles. Positioning system with double-sided clamps The B&S pusher system—feeding and positioning system—is equipped with double-sided hydraulic gripping tongs. This ensures secure gripping and transportation of materials and bundles deviating slightly from the ideal shape. The pusher system is a separate unit and is guided by ball-bearing linear guides, ground rack, and a frequency-driven robust gearbox motor.

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts Dcsdjfgyicepfx Anusn 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Dodpfx Anjfgyifsuscn Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, smooth and ergonomic sawing Specially developed for cutting profiles, beams, and solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting with the K-tech 800H model, the machine is equipped as standard with an additional horizontal clamping vise. The interaction of the hydraulic saw frame lowering, material positioning, and the pusher system is controlled by CNC. The machines come standard with the environmentally friendly 'B&S Clean Cut cutting system' with minimal quantity lubrication, saving on cleaning effort and conserving resources. CNC Control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher system, feed and positioning unit, is fitted with 'double-opening clamping jaws' controlled hydraulically. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is constructed separately and is guided by ball-bearing linear guides, a ground rack, and a frequency-controlled, robust gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 – 90 m/min Table height: 855 mm Dcedpfx Anjfgyigeuon Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirements approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H, with push system P 30. P 60 (optional). Fast, smooth, and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeder, and positioning system is equipped with "double-sided opening gripper jaws" that are hydraulically actuated. This ensures safe gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is built as a separate unit and is guided via ball-bearing linear guides, a precision-ground rack, and a frequency-driven, robust geared motor.

Stanje: novo, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820x610 mm Cutting range at 45 degrees: round 550 mm Cutting range at 45 degrees: square 550 mm Cutting range at 45 degrees: flat 550x600 mm Cutting range at 60 degrees: round 370 mm Cutting range at 60 degrees: square 370 mm Cutting range at 60 degrees: flat 370x600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Dodpfjfg E Hmjx Anuocn Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double-mitre band saw for rapid cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, featuring large-radial center positioning. The work table is mounted with high-quality preloaded bearings to ensure very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning device, is equipped with “dual-side opening grippers” which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is structurally separate and guided via ball-bearing linear rails, a precision-ground rack, and a robust, frequency-driven gear motor.

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Blade speed: 15–100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space required approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to miter cut, feed regulator, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning/disinfection) • Energy-saving and low-vibration due to miter cutting • Ergonomic, safe, free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs to monitor all safety functions • Large-diameter wheels (520 mm) • Clear miter adjustment up to 60° Dcedpfx Aofg E Hlenusn Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to the material or, for series cuts, cut immediately 4. Saw blade off 5. Raise frame to just above the material 6. Open vise

Stanje: rabljeno, Technical details: Dcsdpfxovb Amke Anuen Diameter: 300 mm Mounting: 40 Weight: 5 kg Mounting ISO 40

Stanje: novo, Premer žaginega lista 315 mm Območje reza pri 90 stopinjah: okroglo 108 mm Območje reza pri 90 stopinjah: kvadrat 93 mm Območje reza pri 90 stopinjah: pravokotnik 150 x 90 mm Delovna višina 920 mm Hitrosti vrtenja žaginega lista 17+33 ali 33+66 obr/min Skupna potrebna moč 1,5/1,8 kW Teža stroja pribl. 0,328 t Potreben prostor pribl. 0,8x0,9x1,7 m AKCIJSKA CENA!!! Visoko zmogljiva vertikalna krožna žaga VKS 315 (Artikel 20150) • Poševni razrez levo 60° + desno 45° • Vpenjalna glava z dvojnim vpenjalnim krakom (4-kratno fiksiranje) za minimalne ivice in stransko hitro pomikanje • Žagalna miza z veliko vrtljivo ploščo in posebej stabilno vpenjalno glavo za optimalno vpenjanje materiala Dsdpfx Anjd Iin Ssuscn • Robustno prizemsko vodilo žagine glave (nastavljivo v obliki lastovičjega repa) • Avtomatsko hlajenje • Podstavek stroja s predalom za ostružke • Kovinski ročaj za visoko vpenjalno silo POZOR: Cena je brez žaginega lista!!! (Cena žaginega lista 109,- EUR)

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight: approx. 0.42 t Space requirement: approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double miter metal band saw, frequency inverter, hydraulic semi-automatic model GBS 250 Super HA-I Easy • Miter cuts: left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece: extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Guided, high-quality industrial bearings • Robust vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cutting monitoring via ammeter Dodpsfgyh Usfx Anuocn • Adjustable cutting pressure feed regulator • Support roller (infeed side) • Ball-bearing, rotating table Semi-automatic features: 1. Clamp material 2. Start saw 3. Rapid descent to material or direct cutting in serial operation 4. Saw blade off 5. Raise frame to just above the material 6. Open vice

Stanje: novo, Saw blade diameter: 250 mm Cutting capacity at 90° (round): 85 mm Cutting capacity at 90° (square): 75 mm Cutting capacity at 90° (flat): 100 x 65 mm Cutting capacity at 45° (round): 80 mm Cutting capacity at 45° (square): 75 mm Cutting capacity at 60° (flat): 90 x 60 mm Total power requirement: 0.8 kW Machine weight: approx. 0.04 t SPECIAL PRICE!!! Assembly saw with extensive standard features and large cutting range Dcodpsd Iipcsfx Anuen · For mitre cuts to the left up to 45° · Suitable for cutting steel, stainless steel, and, to a limited extent, aluminium profiles · Coolant automation system directly on the saw blade · 24 V safety switch integrated in handle with restart protection · Complete weight 38 kg – easy to transport · Length stop, assembly tools included Optional accessories: Saw blade: €57 Machine base type 20505: €192

Stanje: novo, Cutting diameter: 240 mm Bandsaw blade dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Cutting speed: 35 + 70 m/min Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangle: 270 x 230 mm Dsdpfx Anjd Iip Ssuecn Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangle: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight: approx. 0.26 t Space requirement: approx. 0.9 x 1.6 x 1.74 m • Miter cut left 60° • Quick-release vice with fast-clamping mechanism • Quick-release lever for easy handling • Frame and gearbox made from a single casting, ensuring very quiet and low-vibration operation • Electronic monitoring of blade tension and blade breakage, with bandsaw blade cover • Carbide bandsaw blade guides • Large machine bed • Machine base (supplied disassembled) with automatic coolant system The AutoCut system consists of: hydraulic cylinder, feed rate control, spring package, limit switch Automatic saw frame lowering via hydraulic cylinder, infinitely variable feed rate, with limit switch at end of cut. Rapid lowering of the saw frame from the resting position to the workpiece, then switch to standard saw feed (for example, for marking). Manual operation: the hydraulic cylinder functions as a brake cylinder (for example, for notching). The brake cylinder allows the saw to be positioned at any point during the return stroke.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer briketa: 50 mm, Premer valja: 50 mm Največja proizvodnja: 50 kg/h Moč motorja: 7,5 KM Dodpfx Asz I Srpenuocn Inšpekcijska odprtina Premer obroča: 1000 mm

Stanje: novo, Pressure 4.5 kN Stroke 40 mm Throat depth 95 mm Working height from/to 95 - 240 mm Table size 160 x 110 mm Spindle diameter 25 mm Machine weight approx. 24 kg Dimensions L x W x H 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force over the entire stroke length. They are predominantly used when long-stroke components must be processed with consistent force. Dcjdpfxefv Av Ss Anuon Superior Engineering • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end position damping on both sides • Double guide rings in the piston, ensuring smooth and consistent operation • Oil-resistant sealing elements Special features of the PND series • Spindle rotation protection • With PND 85/S, spindle return only via one cylinder chamber – additional air savings • Simple, fast and precise adjustment of working height in 2 stages: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle times and reduced air consumption

Stanje: novo, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force throughout the entire stroke length. They are used primarily when long-stroke parts need to be processed with consistent force. Outstanding Engineering: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston for constant, smooth operation • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation • Spindle return on PND 85/S via only one cylinder chamber – saves additional air • Working height fine adjustment is easy, fast and precise in 2 steps: Dcsdpfx Anjfv Awaeuon – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limitation ring on the piston rod Additional advantage: Faster cycle times and air savings

Stanje: novo, Pressure 26.0 kN Stroke 60 mm Throat depth 110 mm Working height from 70 to 250 mm Table size 190 x 140 mm Spindle diameter 30 mm Machine weight approx. 46 kg Dimensions (L x W x H) 310 x 140 x 475 mm Toggle Presses SPECIAL PRICE!!! HK 2600, stroke 60 mm, incl. fine adjustment of working height via bevel gear with side handwheel – convenient and easy to set up. Stand height 475 mm Achieve even more pressing force in production without additional effort. Maximum pressing force just before end of stroke thanks to toggle lever mechanism. Dcedpfx Aofv Avronujn Especially robust spindle head and stand construction.

Stanje: novo, Pressure: 34.0 kN Stroke: 40 mm Throat depth: 130 mm Working height (min. – max.): 80 – 240 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight: approx. 80 kg Dimensions (L x W x H): 375 x 200 mm Dsdpfxofv Avyo Anuscn Toggle lever pneumatic presses Including fine adjustment of the working height via bevel gear with side-mounted handwheel, comfortable and easy to set. Toggle lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Stanje: novo, Pressure: 2.5 kN Stroke: 45 mm Throat depth: 90 mm Working height (min.–max.): 80–220 mm Table size: 120 x 60 mm Machine weight: approx. 22 kg Dimensions (L x W x H): 160 x 230 x 390 mm Dcodpfefv Av Ijx Anusn Rack and Pinion Hand Press HZ 250 The force is transmitted via a rack and pinion system. It is used wherever constant pressure is required throughout the working process. Precisely manufactured; spindle hardened and ground; unlimited service life. Long spindle guide, optimal pressing force. T-slot according to DIN 650, milled centrally, T-slot nuts fit precisely.