Ohra Konzolna Polica nakup rabljenega (475)

Stanje: dober (rabljeno), Okvir: 7800*1100*100 mm Prečke: 3600*130 mm 3600*150 mm Če potrebujete regale ali dodatno opremo v drugih konfiguracijah ali izvedbah, nas prosimo kontaktirajte. Ponujamo celovit program novih in rabljenih regalov ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Na voljo je tudi dodatna oprema, kot na primer: zaščite okvirjev, vogalnika in naletne zaščite, zaščita proti potiskanju, iverne plošče, rešetkaste police, zadnje mreže, prečne nosilce. Dostava: Za stroške dostave nas povprašajte z navedbo vaše poštne številke, kraja in želene količine artiklov. Ljdpfx Ahet N Itbs Usrl Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter vmesne prodaje!

Stanje: rabljeno, Nosilnost: 3200 kg/polica Prečke: 3600*140*50 mm 2700*125*50 mm Nosilnost na paleto: 800 kg Okviri: 8500*1100*100 mm 7900*1100*120 mm Če potrebujete regale ali dodatke v drugih konfiguracijah ali izvedbah, nas prosim kontaktirajte. Ljdpfxog Tmvhs Ah Uorl Ponujamo širok program novih in rabljenih regalov ter dodatne opreme ter vam z veseljem pomagamo pri načrtovanju. Dodatna oprema na voljo: Zaščita okvirjev, kotna in naletna zaščita, proti-potisna varovala, iverne plošče, mrežaste police, zadnje mreže, globinske prečke. Dostava: Za izračun stroškov pošiljke nam, prosim, sporočite vašo poštno številko, lokacijo ter želeno količino artiklov. Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter vmesne prodaje!

Stanje: dober (rabljeno), V prodaji samo prečke: Meta 2700*100 mm 2400 kg/polica 10 EUR/kos HLF 3300*140 mm 3200 kg/polica 12 EUR/kos Hilo (novi tip) 3100*100 mm 2000 kg/polica 11 EUR/kos Dexion P90 3600*100 mm 1400 kg/polica Dexion P90 Silverline 2700*125 mm 2400 kg/polica Če potrebujete regale ali dodatke v drugih sestavah ali izvedbah, nas prosim kontaktirajte. Nudimo celovit program novih in rabljenih regalov ter dodatkov, z veseljem pa vam pomagamo tudi pri načrtovanju. Dodatna oprema na voljo, kot na primer: Okviri, kotni zaščitni profili, zaščita proti naletu, zaščitne rešetke, iverne plošče, mrežaste police, zadnje mreže, prečne povezave. Dostava: Za informativni izračun stroškov dostave navedite vašo poštno številko, kraj ter želeno količino artiklov. Lrsdpfx Ahoq Tpk Io Uel Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, podatkih, cenah ter vmesne prodaje!

Stanje: dober (rabljeno), Leto izdelave: 2019, Pallet racking, Nedcon, height 2.50 – 2.70 m, beam length 3 m and 4 m, 500 kg per pallet, up to 5,600 pallet positions, - used - : Price ex location: only €65,000 (net), dismantled, packed, and loaded, for complete purchase including numerous short beams and short and long upright/end frame protections / guard rails (for double and single rows)! Price for partial quantities: Frames: €45 each Beams: 2 m: €14 each 3 m: €18 each 4 m: €22 each Manufacturer: Nedcon Type: Pallet racking Year of manufacture: 2016 / 2019 Load capacity per pallet: 500 kg Number of frames: approx. 900 units Most frames come with frame protectors Frame height: 2.50 m and 2.70 m Frame depth: approx. 1.10 m Lrjdpfx Ahsw D Ewvs Uol Beam lengths: 4 m at least 624 units (beam height e.g. 12.5 cm / bearing approx. 5 cm) 3 m at least 518 units (beam height e.g. 8.5 cm / bearing approx. 4 cm) Some 1 and 2 m beams also available Condition: good Available: immediately Location: Rhine / Main region, later warehouse in Frankenberg / Saxony

Stanje: rabljeno, Leto izdelave: 2007, RA1784 Galler OMEGA Pallet Racking System Used 16600 x 5400 x 1350 mm Installed in a warehouse Rack height: 5,400 mm Rack depth: 1,350 mm Clear bay width: 3,200 mm Stored goods: Pallets with goods Storage depth: 1,350 mm Storage levels: 1. Goods stored on the floor 2nd to 5th levels: goods stored on pairs of beams Load capacity per pair of beams with a clear bay width of 3,200 mm and level height of 1,500 mm: 2,100 kg Bay load: 8.4 t with a column buckling length of 1,500 mm (minimum 4 bays) → All load capacities apply to evenly distributed loads. Finish: Frame: Sendzimir galvanized Beams: RAL 7035 light grey WITH SURFACE RUST SPOTS Setup: 1 unit single-sided racking row, installed against a hall wall 5 x 3,300 + 100 = total length 16,600 mm Lrjdpsk Abbbsfx Ah Usl Comprising: 6 units Galler Omega Upright Frames, bolted 5,400 x 1,350 mm 40 units Galler Sigma Beams 3,200 mm 80 units Safety Pins Price net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional, if required: 2 used impact protection corners At the beginning/end and at drive-through points for protecting the rack uprights For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: rabljeno, Radialni vrtalni stroj WEBO tip R4bR Lodpfx Aju T Ty Hsh Uorl Tov. št. 15 / E195 Leto izdelave ca. 1965 Moč vrtanja: 50 mm Stožec vretena: MK 5 Največji izteg vretena: ca. 1250 mm (do stebra) Pritrdilna površina: 1400 x 1000 mm Premer stebra: 315 mm Število vrtljajev vretena: 30 - 1325 vrt/min, 9 stopenj Pomik: 0,12 - 2 mm/obrat, 9 stopenj Priključitev na električno omrežje: 380 V, 50 Hz - Število vrtljajev vretena v 9 stopnjah - Motorizirano nastavljanje višine roke Potrebni prostor za uporabo (D x Š x V): 220 x 100 x 285 cm Potrebni prostor za transport (D x Š x V): 220 x 100 x 260 cm (brez motorja za nastavitev višine) Teža: ca. 2,8 t

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, dolžina opore: 3.600 mm, dolžina police: 11.200 mm, višina okvirja: 4.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, širina okvirja: 1.100 mm, število vrst polic: 1, 1 vrstna paletnih regalov (M45113615-3) Dolžina 11,2 m, višina 4,5 m, globina 1,1 m, 3 polja, širina 3,6 m, Vsako polje ima 3 nivoje prečk, nosilnost polja 3000 kg. - 4 okvirji (RM4511 – RAL5019) - 8 talnih plošč, podložni material, pritrditveni material - 16 talnih sider (ZZBA1210) - 18 posameznih prečk (T3615 – RAL2008) - 1 oznaka nosilnosti (BSMcP) Okvirji so vijačeni, niso predmontirani Prevoz / dostava: Lrodpjv Urchsfx Ah Ujl - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča / mesta montaže - razklad s tovornjaka opravi kupec z lastno dvižno opremo - dobava po celotni Nemčiji, razen otokov; dobava v države EU po individualnem dogovoru.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, 100 pieces wire mesh decking, 1 ton per pallet space, for pallet racking 1.20 m deep – New: Price per piece ex-works: €20 (net)! Only available for full lot purchase! Manufacturer: MantaMESH Model: MantaMESH Year: 2024 Lrjdettv Tgopfx Ah Usl Condition: Excellent Available: Immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Load bearing capacity independent of racking beams Uniformly Distributed Load (UDL) (kg): 1000 Permissible Deflection (mm): 7.3 Structural Failure Load (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant - Made in Germany - Pre-galvanised, hemmed support channels - SafeEDGE® on meshes and support channels - Mesh provides over 70% open area - EU Design Registration No. 002435099-0003 Specifications: - Beam type: box section 50 / box section 50 - Rack depth (mm): 1200 - Mesh depth (mm): 1202 - Mesh width (mm): 879 - Top wire spacing (mm): 25 - Bottom wire spacing (mm): 100 - Top wire diameter (mm): 4 - Bottom wire diameter (mm): 5 - Support channel thickness (mm): 1.2 - Number of support channels: 5 - Pre-galvanised - Weight (kg): 12.24 Front: - Bend (mm): 30 - Bend type: External - Bend direction: downwards Rear: - Bend (mm): 30 - Bend type: External - Bend direction: downwards

Stanje: dober (rabljeno), Hanging shelf system for pallet racks (retrofit), 200 rack compartments – used – : Price ex location: €2,950 (net, ex works) Manufacturer: Speedcell Model: Picking Racks Speedcell Storage Year of manufacture: unknown 2 units, each 2.7 m wide 2 units: Each unit comprises: 5 hanging systems per row – 4 rows in depth, total of 20 hanging shelves with 5 compartments each = 100 compartments per rack. Increases storage density by up to 60% Lodpfourya Eex Ah Usrl Reduces labor costs by up to 40% Condition: good Availability: immediately Location: 45731 Waltrop

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, nosilnost na odsek shranjevanja: 1.500 kg, skupna dolžina: 2.700 mm, skupna višina: 100 mm, skupna širina: 50 mm, Paletni regal / regal za težke tovore / prečka L=270 od HLF Heiss Prodajajo se samo prečke Rabljeno blago, ODLIČNO stanje, glej slike Dobavitelj: HLF Heiss Količina: 200 kosov Dolžina prečke: 270 cm Višina prečke: 10 cm / širina: 5 cm Nosilnost na polico: 1.500 kg Barva: oranžna Vključeno z varovali za obešanje Lredpfx Aey H Ew Ieh Uel Letnik izdelave: 2017 Blago na zalogi v Wilfersdorfu pri Mistelbachu/Spodnja Avstrija. Prevoz možen po dogovoru. Ogled možen kadarkoli po predhodnem dogovoru.

Stanje: dober (rabljeno), Dvižni sistem, Megamat, 170kg na polico, cca 6m višine – rabljeno: Cena na lokaciji: 14.500.- € (neto), dodatno demontaža ipd. Proizvajalec: Megamat Tip: Megalift 14448/25/6010 Leto izdelave: 2000 Največja nosilnost na polico: 170kg Največja skupna nosilnost: 18.000kg Mere police: pribl. 2,45m x pribl. 0,80m Število polic: pribl. 40 kos Mere naprave: Višina: pribl. 6,01m Širina: 2,76m Ledpjyhxkmefx Ah Usrl Globina: pribl. 2,70m 3/N/PE 230/400V 10A, varovalka 16A Stanje: dobro Na voljo: takoj Lokacija: BG-8800 Sliven

Stanje: rabljeno, Nedcon paletový regal pribl. 3,1 tm, rabljen 🧰 Lastnosti izdelka • Proizvajalec: Nedcon • Barva: modra • Stanje: rabljen, glej slike • Okvirji: 2 kosa predmontirana 500 x 105 cm • Širina okvirja: 10 cm • Prečke: 8 kosov s svetlo širino 290 cm • Varovanje: 16 kosov pocinkanih varnostnih zatičev • Pritrditev: 8 kosov Hilti betonskih sider Lrodey D Nybjpfx Ah Usl • Nosilnost: 2.000 kg na nivo • Poljska nosilnost: 12.000 kg • Vložene police vključene! 💰 Cena: 440 € neto brez DDV. • Količinski popust: po dogovoru • Stroški pošiljanja: po vsej Evropi po dogovoru • Dobavni rok: takoj dobavljivo • Ogled in prevzem: možno kadarkoli po dogovoru Stalno na zalogi več kot 5.000 tm paletnih regalov različnih proizvajalcev. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do vmesne prodaje! Glejte naše Splošne pogoje, vse cene brez DDV iz skladišča.)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. Lodpfx Ash R Taqeh Usrl According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Lsdpfsmhhypsx Ah Uerl Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Lredpfx Ahomhh Dhs Uol Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Ljdpfx Ahofdkb Ts Uerl Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth Lsdpfxomhh Dzs Ah Usrl - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm Lrjdsmhh Anopfx Ah Ujl - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth Lodpfx Ahjguk A He Uerl - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard Lredoguk Dkepfx Ah Ujl - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany Lrodpfx Ahsmhhy Nj Ujl - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard Lrjdjmhh Dtopfx Ah Uol - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) Lodsguk Dvjpfx Ah Ujrl - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: novo, Order picking trolley, tier trolley, shelving trolley, rolling trolley, transport trolley, shelf with castors, shelf with bins incl. 36 x open-fronted storage bins Specifications: Height: approx. 216 cm Depth: approx. 68 cm Length: approx. 1.95 m Load capacity: 150 kg per level Lrjdpfx Ahoy Tvq Ss Ujl Uprights in blue Beams in orange Open-fronted storage bins in blue Chipboard in natural finish New equipment BLT / WR 20/60 100% quality at the best price. The shelving unit consists of: 2 x uprights approx. 200 x 60 cm, pre-assembled 14 x beams approx. 185 cm 7 x chipboard shelves approx. 184.5 x 59.5 cm 28 x locking pins 36 x open-fronted storage bins size 5 (500x300x200 mm) 2 x swivel castors with brake 2 x swivel castors without brake 4 x mounting plates for castors Number of levels: 7 storage levels -- AVAILABLE IMMEDIATELY IN MULTIPLE UNITS -- Price: €822.00 net €978.18 gross You will receive an invoice with VAT shown separately. Shipping: Delivery can be arranged via our partner freight forwarding company upon request, with costs depending on the postal code. Our recommendation: Let us know your requirements... We’re happy to support your projects – from planning and ordering to installation. Interested or have questions? Just contact us by message or phone. Our phone number can be found on our company page. ☎️ We are available by phone Monday to Friday from 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Stanje: novo, Leto izdelave: 2022, approx. 14 linear meters, H: 650 cm, compartment load: 3000 kg, pallet racking, heavy-duty racks, high-bay racks, industrial shelving, immediately available from stock Specifications: - Height: approx. 650 cm - Depth: approx. 110 cm - Length: approx. 14 linear meters - Load capacity: 3000 kg per compartment - Frames galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams in orange - Brand new BLT / PR65 - Manufactured in Europe & tested according to the latest DIN EN 15512 standard - 100% quality at the best price Rack consists of: - 06 x frames approx. 650 cm x 110 cm, disassembled - 30 x beams approx. 270 x 14 x 5 cm, T30 - 60 x locking pins - Levels: floor + 3 - 60 pallet spaces including floor level -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Lrsdpfx Aoy Tvqleh Ujl Price: €2,400.00 net plus statutory VAT You will receive an invoice with VAT shown separately. Frame pre-assembly is available by us for a small surcharge of €12.50 net per piece. Transport: Delivery upon request by our partner forwarder, cost depends on postal code. Installation: Our trained staff are available to assist you with the professional assembly and disassembly of your warehouse equipment as required. Our recommendation: Let us know your requirements ... We are happy to support you in realizing your projects, from planning and ordering to installation.