Fresia Snow Shovel nakup rabljenega (591)

Stanje: rabljeno, prevoženi kilometri: 490 km, moč: 375 kW (509,86 KM), konfiguracija osi: 6x4, barva: zelen, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, vzmetenje: zrak, Leto izdelave: 2026, Oprema: ABS, EBS (Elektronski zavorni sistem), klimatska naprava, For vehicle inquiries, please contact Mr. Seidel (by phone). Mercedes-Benz Arocs 2651 L 6x4 short timber transporter Rjdpfx Asyfpwnsgtot SCHEMEL SHORT TIMBER BODY, Manufacturer: EBERT, Dimensions: approx. 6,750 mm between front wall and crane, 4 EXTE bogies D6 – adjustable with clamp fasteners and tie-down ratchets or counter-holders for load securing, with 8 EXTE stakes D5 – telescopic, with special Z-profile subframe 200 mm high, center of frame closed with checker plate, front wall welded construction with internal special aluminum profiles approx. 2,600 mm high, 4-piece foldable and telescopic tarpaulin cover for timber transports, hose chains and supply lines of high quality with step ladder for easier access, installation of side marker lights, access to crane, double compressed-air connections, cover over battery box and air tank with aluminum checker plate on both sides, electrical and hydraulic connection (engine start/stop from crane seat), with oil shut-off valve, with rotatable protective guard for chainsaw etc., holder for snow chains, holder for broom and shovel on front wall, body primed, chassis black, epoxy primer & acrylic quality paint, oil filling, TÜV inspection – UVV inspection – tachograph check Equipped with: Palfinger-EPSILON loading crane Y CRANE ON 2 M 12 Z91 – fully hydraulic timber loading crane M12Z EPSILON loader crane, crane folded sideways, configuration HIC/HD4/04, base unit and crane column painted RAL 7021 black-grey, protected hydraulic lines, integrated operating switch and service interval indicator MZ91_2 Z-arm system 9.1 m, outreach: 9.1 m, net lifting moment: 107 kNm, maximum performance: 107 kNm HHC_2 High seat with removable manual control, incl. mechanical slewing device at crane column (without slewing ring), B1B Electronic braking system with ABS and ASR, B1F Heating, electronic compressed-air supply unit, B1H Electronic compressed-air supply and control, medium, B2A Disc brakes on front and rear axles, B2X Parking brake, electronic, B2Z Parking brake, additional on front axle, B4A Condensate monitoring for compressed-air system, B4M Air reservoir, steel, B5A Trailer brake, 2-line, brake connections left, C2R Wheelbase 4800 mm, C4L Rear overhang 2550 mm, C6J Power steering pump, non-adjustable, C6Q Stabiliser, front axle, C6U Additional stabiliser, rear/tag axle, D0A Leather steering wheel, D0S Compressed-air connection in driver’s cab, D1C Driver comfort suspension seat, D1N Passenger functional seat, D2N Seatback unlocking, driver’s seat, D3B Comfort bunk lower, D4T Curtain crosswise in front of bed(s), D4Y Sunblind side, driver side, D5F LED ambient lighting, D6G Automatic climate control, D6M Additional hot water heater cabin, D7A Additional thermal insulation, D8N Electric sunroof, E3R Power socket 24 V/25 A, passenger footwell, E5H Night driving light switch, E5K MirrorCam switch by the bed, E6A Trailer socket 24 V, 15-pin, E6Z Reverse warning, E7F Cable remote control for air suspension, E9G Pre-installation for electrical devices, F0F Side module, N3 vehicle, F0T Illuminated Mercedes star, F2E Floor variant tunnel 170 mm for storage compartment left, F2G Cab width 2.30 m, F2W StreamSpace, F5L External sun visor, transparent, F6C Tinted windshield, F6I Heated front mirror, F6Q Air horn, F6T MirrorCam, F8V Light sensor, F8W Rain sensor, G0B Drivetrain, 44 t up to 80 t, G0R Gearbox mounting arms, optimized for removal, G0T...

Stanje: rabljeno, Leto izdelave: 2018, moč: 66 kW (89,73 KM), prevoženi kilometri: 34.187 km, Datum prve registracije: 09.01.2018_____Smart fortwo sa opremom za zimske službeGodina proizvodnje: 2018Prva registracija: 09.01.2018 Snaga motora: 90 KS (66,2 KW) Broj pređenih kilometara: 36.000 Glavni tehnički pregled: 01.09.2027Nadogradnja: Rontex, snežni plug, Ecoplow 180 (Evidencioni br.: 11933, Serijski br.: S18020200152) Godina proizvodnje: 2023 Inteligentna plivajuća pozicija – V4A nerđajući čelik sistem snežnog pluga sa inteligentnom plivajućom pozicijom (Sistem uvek radi sa optimalnim pritiskom i održava ga bez obzira na podlogu) Lehner, posipač, Polaro 70 E (Evidencioni br.: 11947) Godina proizvodnje: 2023 Zadnji sistem za posipanje sastoji se od: posebnog zadnjeg mosta (umesto branika integrisan u vozilo), nosača i zadnjeg posipača Lehner Polaro 70 E sa elektronskom regulacijom- Ograničavajuće šipke za plug (2 kom.) - Držač za lopate (nerđajući čelik) za metle i/ili lopate - skidajuća rotaciona svetla sa teleskopskim nosačem, Lokacija: 63263 Neu-Isenburg Rjdpfx Aox Surrogtst

Stanje: rabljeno, Leto izdelave: 2023, Oprema: sprednji priključni vrat, Turf tires: front 215/70R16, rear 310/75-24. Branson front loader BL15C with bucket and 3rd hydraulic circuit. Disc spreader for salt, sand, and fertilizer. Vario / snow plow, 2000 mm. Redpfx Ajt Dakzjgtet

Stanje: novo, Adjustable rubber scraper for pushing, for example, feed, snow, soil, and manure. Suitable for mounting on the 3-point linkage. Equipped with mechanically adjustable end pieces. Also fitted with fork slots for use with wheel loaders and forklifts. Rsdpfsx Tcgtjx Agtst Condition: New

Stanje: rabljeno, skupna dolžina: 1.410 mm, lastna masa: 423 kg, gradbena višina: 1.060 mm, gradbena širina: 2.150 mm, Lopata za razsuti tovor Redpfxewlxgts Agtst

Stanje: rabljeno, največja dovoljena obremenitev: 33.707 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2025, Oprema: ABS, STAS 3-axle Hardox steel tipper 50 cbm "EXTREME" rock tipper First registration 09/2025, condition NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body design in width) Unladen weight: 8,293 kg Z-chassis, cranked version Rsdpoxriu Eefx Agtst Continuous floor panel in 6 mm Hardox steel HB450 4 crusher angles evenly distributed along the entire length of the floor, fully welded Front and side walls made of 5 mm Hardox steel HB450 Inclined front wall, with internal access Deflector plates running the full length of the sidewall (to protect mudguards) Hydraulic tailgate (with swinging function) HYVA tipping cylinder type Alpha, suitable for high and low pressure ALU landing legs, full load capacity 2x pneumatic vibrators mounted beneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lifting axle with starting aid WABCO trailer EBS with RSS anti-skid protection WABCO Smartboard Automatic tipping lowering function Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holders Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available immediately from us with FULL SERVICE RENTAL.

Stanje: novo, skupna masa: 20.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, z indikatorjem obremenitve osi, dolžina nakladalne površine 8.200 mm, nakladalna višina obremenjena pribl. 900 mm, 20 pritrdilnih ušes po 10 t, 14 žepov za kole v zunanjem okvirju, nakladalne rampe (pribl. 3.000 x 750 mm), plezalna letvica na zunanji strani pri rampi in zadnjem nagibu, rampe nastavljive po širini, vzmetni dvižnik za enodelne rampe, lesen pod debeline 70 mm, zabo za shranjevanje z verižnim ali napenjalnim trakom, označevalni trak v skladu s predpisi, parkirna zavora z vzmetnim akumulatorjem, vozilo popolnoma vroče pocinkano, vključno z indikatorji obremenitve osi; dodatki za doplačilo: opozorilne table + osvetlitev + rotacijska luč = cena: 800 €, razširitev na 3 m = cena: 1.100 €, hidravlične enodelne rampe 500 €, hidravlični pomik ramp? = cena: 1.000 €, izrez za izkopno roko = cena: 1.000 €. Na zalogi tudi z dolžino nakladalne površine 9,20 m. -- Pridržujemo si pravico do napak in sprememb, vzorčne slike -- Več podatkov na:!, More Details: ! Rsdpfsy Hvgmex Agtjt

Stanje: zelo dobro (rabljeno), Profiling rod milling machine for handles Sibo Taus 2 1/2 Rodpfx Agsv Tv Uretet Working diameter: 18-63 mm Main motor power: 5.5 kW Minimum workpiece length: 470 mm Feed speed steplessly adjustable via variator Capable of producing items such as: billiard cues, broom handles, shovel handles, rake handles, and chair legs

Stanje: novo, lastna masa: 7.460 kg, največja dovoljena obremenitev: 22.540 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, with axle load indicator, loading area length 9,200 mm, loading height loaded approx. 900 mm, 20 lashing rings each 10 t, 16 stake pockets in the outer frame, drive-on ramps (approx. 3,000 x 750 mm), climbing rail on the outer side at the ramps and rear slope, drive-on ramps adjustable sideways, spring lifter for one-piece ramps, 70 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour markings as required, spring-actuated parking brake, vehicle hot-dip galvanized, incl. axle load indicators, Surcharge for: Warning signs with lighting and beacon = Price: 400 ¤, Widening to 3 m = Price: 500 ¤, hydraulic one-piece ramps and hydraulic ramp adjustment = Price: 1,000 ¤, excavator arm recess = Price: 1,000 ¤, Also available with 8.20 m loading area length + widening in stock. -- Subject to typographical errors, mistakes and changes, sample pictures --, More data at: !, More Details: ! Rjdpfxey E H Sdj Agtjt

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Ladeflächenlänge Gesamt ca: 8.800 mm, Tiefbett ca: 6.600 mm lang, Ladehöhe bel. ca. 890 mm, 24 x Zurrösen je 10 t, 12 x Rungentaschen im Aussenrahmen, Auffahrrampen (ca. 3.100 x 750 mm), Kletterleiste Aussenseite an der Rampen und Heckschräge, Auffahrrampen seitlich verstellbar, Holzboden 68 mm stark, Staukiste mit Deckel für Zurrketten oder Spanngurte, Konturmarkierung nach Vorschrift, Rundumleuchte, Fahrzeug Tauchbad- Feuerverzinkt, incl. Achslastanzeigen, Aufpreis für: Warntafeln mit Beleuchtung und Rundumleuchte, Verbreiterung auf 3 m mit Holzer, Preis: 500 €, Hydraulische Verschiebung der Rampen = Preis: 1.000 €, Baggerstiehlmulde = Preis: 1.000 € netto, -- Druckfehler, Irrtümer und Änderungen vorbehalten, Muster- Bilder --, Mehr Daten unter: !, More Details: ! Rsdjy Eti Aspfx Agtst

Leto izdelave: 2023, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, ogrevalna zmogljivost: 72 kW (97,89 KM), Brewing system – 3-vessel brewhouse with extensive optional equipment: Mashing – Lautering – Boiling/Whirlpool Redpfey Igzqex Agtet Manufacturer: HGMC Year of construction: 2023 Net output: 1,200 l Width: approx. 6.50 m Depth: approx. 2.70 m Height: all vessels up to condensate separator approx. 2.65 m (Mash tun and lauter tun incl. condensate separator approx. 1.70 m additionally) (Boil kettle incl. vapor condenser approx. 0.35 m additionally) Details: - Mash tun with agitator and 2-zone steam heating - Lauter tun with raking mechanism and sparge nozzles, as well as lauter grant with fine adjustment valve, underback spray nozzles, and 4-section, removable lauter plates - Boil kettle/whirlpool with tangential inlet and 2-zone steam heating, plus kettle vapor condenser - All tanks with sight glass, LED lighting, and CIP system - Stainless steel platform with handrail and stairway - Mash and wort pumps - Control panel for mash agitator and raking mechanism, mash and wort pumps, as well as automatic valve control for heating (each heating zone can also be shut off manually via handwheel) - 72 kW electric steam generator with automatic water softener and integrated power meter, main fuse, and individual protection for each of the three heating elements - Plate heat exchanger - All piping routes can be switched manually via DN ball valves - Heating-up rate < 1 min/°C - Hop strainer - Spent grain discharge at working height with raking mechanism support and spent grain shovel, spent grain flap with discharge plate - Generally high-quality workmanship and perfectly matched components The system operates excellently and delivers top results. Lautering in particular runs exceptionally well, and the heating output is more than sufficient. With the optional, electrically heated 1,000 L hot water tank with 18 kW output, double brews are possible without issue. Price-performance ratio is unbeatable. Inspection is possible by arrangement. The system can be tested on site by appointment. Sale due to business closure.

Stanje: novo, Leto izdelave: 2026, Semi-automatic multi-product bagging station with precision weighing scale. The operator positions the empty bag under the bag holder, and the packaging machine fills it quickly and with maximum precision thanks to the automatic weighing system. The product is withdrawn from the hopper via a conveyor belt driven by a reduction gearbox. Wide-mouth container for easy filling with a mechanical shovel or other system. Rjded Nqvnepfx Agtot Side and rear forklift couplings facilitate transport. Specification of the ARK01 bagging machine with hopper: - Packaging capacity: 3-4 tons/hour - Hopper capacity: 2 m³ (heaped) - Overall dimensions: L 210 cm x W 260 cm x H 225 cm - Total weight: approx. 400 kg - Accuracy with a tolerance of +/- 100 grams - Capability to prepare bags from 1 to 50 kg* - Wiring for power supply - Manual tilting gate to regulate discharge volume - Vertical inclination scale to adjust the height according to the bags used - Control panel - 400V three-phase power supply - Operating manual - Made in Europe

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized Rodpfxjh R Taqj Agtst - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone Rsdpfx Agemhhypotjt - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Rjdpsmhh Dhofx Agtjt Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Rodjmhh Dzopfx Agtet - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: Rodpfx Aod Tbbdjgtot - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rsdpfefdkb Tex Agtot Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Rsdpomhhx Ijfx Agtst - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Rjdpfx Asmhhyaegtet - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: Rjdpfxjh Ek Daj Agtot - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation Rjdpfx Agemhh Anjtjt - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) Redpfx Aed Tqalegtet - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Rjdpofdkb Uofx Agtjt - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized Rjdpfxjguk Dko Agtot - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.