Fatosa Z Arm Mixer nakup rabljenega (59.330)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: Gjdpfsmhhx Isx Adkoka 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type Godpomhhyaefx Adkoka - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth Gkodpfx Aomhh Anodkea - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) Gedsfdkb Ujpfx Adkjka - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Gsdsguk A Hepfx Adkska Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Gkjdpomhhf Sjfx Adksa - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Gedpfx Aomhhl Hjdkoka Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm Gedpfxjmidyfj Adkoka - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. Gkjdpfx Adoguk Dkokea When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) Gedpfx Ajfdkbhjdkska - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright. Gkedpomhh Dtsfx Adksa

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Gkodpfx Aeguk Dvsdkja - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 90L1201, Polar Mohr DC-M Die Cutting Machine – As-New Condition! Sale price: €69,000 (plus VAT) Ex works: 2325 Himberg near Vienna, Austria Condition: Hardly used – almost as new Availability: Immediately available Description: For sale is a Polar Mohr DC-M die cutting machine in excellent condition – barely used and virtually as new. The machine is ideal for the precise die-cutting of labels, tags, and packaging elements, and impresses with its high reliability and efficiency in daily production. The DC-M is renowned for its user-friendly operation, compact design, and seamless integration into existing production processes – a genuine quality product “Made in Germany.” Technical highlights: Gkodpfx Adswuq Afjksa • Precise die-cutting quality at high productivity • Ideal for label production and small formats • Sturdy construction for long-term use • Compact footprint – suitable for smaller production spaces • Operator-friendly interface Inspection possible by appointment. Sale ex works (EXW) 2325 Himberg near Vienna, transport and loading available on request. 👉 Contact us now to secure an almost new Polar Mohr DC-M at an attractive price!

Leto izdelave: 1997, stanje: dober (rabljeno), Ibarmia CNC machining center for sale. Model: ZVL 3000 Control: Heidenhain TNC 426 CB X-axis travel: 2200 mm Gsdpfx Ash Hp Unedkska Y-axis travel: 800 mm Z-axis travel: 600/800 mm Bed size: 850 x 2600 mm Max. workpiece weight on bed: 3500 kg Spindle: SK40 with coolant Max. spindle speed: 4000 rpm Tool changer: 40 positions Power output: 47 kW Includes: documentation, parameters, tool holders, chip conveyor, and central lubrication Year of manufacture: 1997 Dimensions: 625 x 305 x 340 cm (L x W x H) Weight: approx. 12,000 kg Video available! For further information, please call us or send an email.

Stanje: rabljeno, EBRO ARMATUREN EB5.1 SYD Št. artikla: 4535669 Kot rotacije: 90+/-3 Maks. tlak: 1MPa + EBRO ARMATUREN Z011-A / DN80 Disk: 1.4408 Gred: 14104 Tesnilo: NBR PN 6/10/16 - EN109 Gksdpfx Adey Spxmjksa PS: 10 bar

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2002, Teile, die von Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Gsdpfek It Utjx Adkoka

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 1.300 mm, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 40 m/min, hitri pomik na osi Z: 40 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, nazivna (navidezna) moč: 135 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC640i HSCI, premer obdelovanca (maks.): 1.500 mm, teža obdelovanca (maks.): 3.000 kg, premer vrtljive mize: 1.200 mm, skupna masa: 37.000 kg, hitrost vretena (min.): 1.200 obr/min, dovod hladilne tekočine: 70 letvica, moč vretenovega motorja: 7.800 W, nos vretena: BT50/Capto CS, število vreten: 2, število mest v zalogovniku orodij: 80, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Ibarmia ZVH60/L6000 je vsestranski večprocesni obdelovalni center, zasnovan za natančno rezkanje in struženje. Opremeljen je z nadzornim sistemom Heidenhain TNC640i HSCI in prenosnim ročnim komandirjem HR-520, kar omogoča izjemen nadzor in točnost, dodatno izboljšano s Heidenhain Kinematics Opt kalibracijo rotacijskih osi. Stroj ima zmogljivo glavno vreteno CAPTO CS s hlajenjem skozi vreteno pri 70 bar, prostorno 80-mestno orodjarno ter podporo za BT50/CAPTO orodja. Njegova vodoravna rotacijska miza in stružna glava zagotavljata do 78 kW in 1400 Nm z višino centra 500 mm, medtem ko zamaknjena Y-osna rotacijska miza omogoča nihanje za 5-osne operacije do Ø1200 mm. Dodatne prednosti vključujejo samocentrirno trielno vpenjalo (Ø630 mm), prehod palice 110 mm, hidravlično podaljšanje za avtomatizirano delovanje, ročni zadnji naslon in podnožje za zadnji naslon. Natančnost zagotavljata zaznavali RENISHAW RMP600 in TS27R, podprte pa so tudi operacije vlečenja zobnikov, skobljanja zobnikov ter brušenja z HSKA100. Za enostavno uporabo in vzdrževanje stroj vključuje pištolo za zrak in pršenje, filtracijo megle, prevračajočo posodo za odrezke, podporo za luneto, enoto za oblačenje, operaterski podest in predelave na varnostnih vratih – vse v enem kompletnem stroju za zahtevne obdelovalne naloge. Celotna tehnična specifikacija na voljo na zahtevo. Godpjzdix Ujfx Adkoka

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, PTR1600L Carmec – naprava za preizkušanje tlaka za glave in bloke valjev – nova naprava Hidravlično dvigovanje plošče, motorizirano vrtenje plošče. Največje dimenzije glave valja: 1350 mm x 300 mm × 395 mm Največja teža glave valja: 300 kg Nastavljiv preizkus z zračnim tlakom: 0 bar – 10 bar Nastavljiva delovna temperatura: 0–90 °C Prostornina rezervoarja iz nerjavečega jekla: 540 litrov Moč gretja: 2 × 4,0 kW Moč hidravlične enote: 0,75 kW Moč motorja za vrtenje: 0,18 kW Največja navpična pot: 600 mm Čas za dvig in spuščanje: 10 s Hitrost vrtenja: 4 vrt./min Gkjdpfou S Eqnjx Adkja Napajalna napetost: 220–440 V 3Ph+E (± 10 %) Frekvenca: 50–60 Hz Delovna napetost: 24 V AC Prazna masa rezervoarja: 440 kg Dimenzije naprave: 2050 mm × 1120 mm × 1650 (največja V) mm Če vas zanima, me kontaktirajte! Na voljo še več naprav: Berco, Comec, A-M, Carmec, Kwik-Way, Serdi, PEG Naprave za vrtanje povezovalnih palic, vrtanje valjev, brušenje, stroji za obdelavo sedežev ventilov, čistilne naprave za dele, stroji za brušenje ventilov, stroji za obdelavo notranjosti valjev, stroji za stiskanje vodil ventilov, preizkusne naprave za tlak, stroji za obnovo površin, vakumske preizkusne naprave, stroji za stiskanje vzmetnih ventilov, stroji za poliranje gredi.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, CCT1600L A-M Preizkuševalnik tlaka za glavo in blok motorja – nova naprava. Hidravlično dviganje pladnja, motorizirana rotacija pladnja. Tehnični podatki: Maksimalne dimenzije glave motorja: Dolžina x Širina x Višina: 1350 x 425 x 300 mm Kapaciteta rezervoarja iz nerjavečega jekla: 500 litrov Grelni elementi: 2 x 4,5 kW Hidravlično dviganje pladnja Motorizirana rotacija pladnja Hidravlični dvig: 0,75 kW Reduktorski motor: 0,25 kW Čas pomika gor/dol: 600 mm v 10 sek Termostat: 0-90°C Napajanje: 16kVA-3x230V-AC-50/60Hz Lastna teža cca: 600 kg Potrebni prostor: Dolžina x Širina x Višina: 2100 x 1050 x 1700 mm Če vas zanima, me prosim kontaktirajte! Na voljo še ostali stroji: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Naprave za brušenje ventilov, stroji za brušenje glav in blokov, rezkalniki sedišč ventilov, preizkuševalniki tlaka, industrijski pralni stroji Gksdpfx Adsncd Ecjkoa

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: N2104796, GEM F470 AUTOMATIC CARTON SEALER WITH AUTOMATIC FLAP CLOSURE FOR CONSISTENT CARTON SIZE incl. centering unit and Siemens S7 PLC control CARTON DIMENSIONS: - Length: min. 150 mm – max. 600 mm - Width: min. 100 mm – max. 520 mm - Height: min. 100 mm – max. 670 mm TECHNICAL DATA: - Siemens S71200 PLC control - RCC500 infeed centering unit - Vertical drive & guide belts - Carton size adjustment: Manual - Sealing unit for bottom & top - Standard configuration T22 / T23 - Tape width: 50 mm (depending on sealer unit) - Adjustable tape tension - Max. tape roll diameter: 360 mm - Tape roll core: 76 mm Gkodpoykugxefx Adkja - Mains voltage: 400V, 3-phase, N, PE – 50/60 Hz - Power consumption: 0.25 kW - Protection class: IP 54 - Working environment: +5°C – max. +35°C - Conveyor speed: 22 m/min - Average output: 1,200 cartons/hour - Working height: 650 mm - Weight: 293 kg - Machine dimensions (L x W x H): 2,470 x 990 x 1,782 mm (H) - CE safety features: side sheet metal guards with access door, additional infeed doors L 850 mm, upper and lower covers Image may show optional equipment subject to extra charge.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Podatki: Obdelovalni center Ibarmia (3 osi) XYZ: 3050 x 600 x 900 mm Število obratov: 12.000 min⁻¹ Magazin: 60 mest, HSK 63 Gjdpfeywz H Hex Adkoka Visokotlačno: 60 bar Merjenje orodja Renishaw Merilna sonda Renishaw Sistem za hlajenje / tračni filter Transporter za ostružke

Stanje: dober (rabljeno), moč: 0,018 kW (0,02 KM), potovalna razdalja osi X: 2.200 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, skupna masa: 15.000 kg, dolžina mize: 2.600 mm, širina mize: 850 mm, največja hitrost vretena: 8.000 obr/min, Oprema: transportni trak za ostružke, FEATURES Table size: 2600 x 850 mm X-axis travel: 2200 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Spindle speed: 8,000 RPM CNC control: Fagor 8055 - MC Motor power: 15/18.5 kW Tool magazine capacity: 40 Tool taper: BT 40 Fourth axis (IRTS rotary table): 350 mm diameter Electronic handwheel Gkedpfor I Aumjx Adkja Through-spindle coolant Chip conveyor Air cooling Dimensions with chip conveyor (W x L x H): 4029 x 7050 x 3100 mm Weight: 15,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Na voljo je portalni obdelovalni center: okrogla miza: 1500 mm, pomiki X/Y/Z: 1600 mm/800 mm/800 mm, vpenjalo orodja: SK50, pogon vretena: 60 kW, obratovalno območje: 20 do 6000 o/min, menjalnik orodij: 30 mest, masa stroja cca 19.200 kg, mere stroja X/Y/Z cca 6000 mm/4000 mm/3200 mm. Vključno: notranje hlajenje (IKZ), transporter ostružkov, spiranje ostružkov, cca. 60 kosov vpenjal SK50, tročeljustna vpenjalna glava. Ogled možen po dogovoru. Godpfoylbqyex Adkska

Stanje: dober (rabljeno), Load capacity: 50 kg Working length: 7000 mm Gedpfx Adeh Ri Svekoka

Stanje: zelo dobro (rabljeno), SAPI Büffel 100 blasting cabinet with YASKAWA robot Year of manufacture: 2020 Gsdovyh Dlopfx Adkoka Serial number: 20648 including industrial robot YASKAWA YR-1-06VX-A00, serial number: K18777-473-1 Control system: YASKAWA Eras-1000-06VX8-E10 The cell was used for the satin finishing of plastic components.