Costa Levigatrici S Cctt 1350 nakup rabljenega (83.015)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 235 kg, največja dovoljena obremenitev: 1.115 kg, skupna masa: 1.350 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.550 mm, širina tovornega prostora: 1.330 mm, višina nakladalnega prostora: 430 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, SARIS MP 255 133 1350 2 NEW VEHICLE Internal dimensions: 255cm x 133cm Side wall height incl. railing: 43cm Loading platform height: 52cm Gross weight: 1350kg Payload: 1115kg Braked single-axle low-loader Overrun brake and handbrake by KNOTT 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls Steel railing Rear side wall foldable and removable with tension latch 15mm thick, anti-slip and robust screen printing wooden floor Jockey wheel 6 lashing eyes with 400kg tensile strength each 14" reinforced C-tyres 2x wheel chocks M+S tyres Net/rope hooks on the frame 13-pin plug Front position lights Rear lights with reversing light, rear fog lamp, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Foldable and removable front panel - Loading ramps - SARIS light alloy wheels - Complete LED lighting - Anti-theft device - Fine or coarse-meshed net - H-rack - Mesh sides in various heights, also closed - Flat cover with or without bows - High cover 150cm or 180cm - Rear support stands Additional accessories on request! Kedpjgrqy Ajfx Akgelt Plus freight to Gera and vehicle documents €100 net Images are examples and may show optional accessories at extra charge. Haven’t found the right trailer yet? We have 50-100 vehicles permanently in stock and immediately available. Our workshop is open on weekdays from 8:00 - 17:00 for all types of repairs. Specialist in axle repairs, including for caravan trailers. Large selection of rental trailers. Moreover, we offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or stop by in person.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 04/2016, dolžina tovornega prostora: 13.400 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.650 mm, skupna dolžina: 14.040 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, medosna razdalja: 8.770 mm, barva: bela, Leto izdelave: 2016, Konfiguracija osi Dimenzija pnevmatik: 385/65R22.5 Znamka osi: SAF Zavore: kolutne zavore Vzmetenje: zračno vzmetenje Zadnja os 1: dvižna os; max. obremenitev: 9000 kg Zadnja os 2: max. obremenitev: 9000 kg Zadnja os 3: max. obremenitev: 9000 kg Teže Lastna teža: 8.470 kg Nosilnost: 30.530 kg Dovoljena skupna masa: 39.000 kg Funkcionalnost Proizvajalec nadgradnje: Carrier Vector 1350 Hladilni motor: dizel in elektrika (7.362 delovnih ur dizel; 630 elektrika) Stanje Tehnično stanje: dobro Videz: dober Klodpfx Aoyufxaskgot Identifikacija Registrska številka: OP-43-FZ = Dodatne možnosti in oprema = - Elektronski zavorni sistem (EBS) - Zadnja vrata - Dvižna os - Hladilna/zamrzovalna enota - Zračno vzmetenje - Kolutne zavore

Stanje: rabljeno, številka stroja/vozila: 007984, Maks. obdelovalna širina: 1300 mm Min. obdelovalna debelina: 4 mm Delovna miza: fiksna višina Podtlak preproga: da Število delovnih agregatov: 4 kos Kodowqdbmopfx Akgslt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2449-01, širina brušenja: 1.350 mm, višina brušenja: 150 mm, hitrost pomika os X: 12 m/min, premer brusilnega koluta: 1.380 mm, TEHNIČNI PODATKI Mere obdelovanca (dolžina x širina) min.: 30 x 30 mm Mere obdelovanca (širina x višina) max.: 1.350 x 150 mm Mere brusnega traku: 1.380 x 1.900 mm Premer diskastega agregata: 1.380 mm Hitrost brusnega traku: 8–22 m/s Hitrost diskastega agregata: 10–22 m/s Kledpfx Akeyx Hhxeget Hitrost podajanja (frekvenčno regulirano): 2–12 m/min PODROBNOSTI O STROJU Električne zmogljivosti Motor podajanja (frekvenčno reguliran): 2,6 kW Brusni trak (W): 18,5 kW Disk (RD): 12,9 kW Električni priključki: 400 V Frekvenca: 50 Hz Krmilni tok: 110 A OPREMA Diskasti agregat (RD) z abrazivnim vlaknastim kolutom 2 brusna tračna agregata (W) pred in za diskastim agregatom

Stanje: rabljeno, BIESSE SAND REGAL 1350 je industrijski širokotrak brusilni stroj, namenjen za kalibracijo in fino brušenje ploščatih kosov v pohištveni in ploščni industriji. Serija REGAL predstavlja robustno proizvodno rešitev, primerno za srednje in velike proizvodne obsege. Stroj je zasnovan modularno in omogoča kombinacijo kalibracijskih ter končnih obdelovalnih operacij v enem prehodu, kar občutno poveča produktivnost. Klodpsynb Rfefx Akget

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, skupna dolžina: 2.350 mm, nosilnost: 1.750 kg, lastna masa: 115 kg, Teleskopske vilice Težišče tovora: 600 ISO razred: ISO razred 2 = 1.000 - 2.500 kg Stanje: Pripravljeno za uporabo in popolnoma delujoče Tehnično stanje: dobro Ksdpfoy E Uxfjx Akgjlt Opis: Dobre, pripravljene za uporabo, v stanju, kot ga je vrnil prejšnji lastnik Nosilnost: 1750 kg pri 600 mm, 600 kg pri 1750 mm Dolžina vilic: 1350 mm - 2350 mm Montažna površina: 1200 mm

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Klodjw Naanepfx Akgst Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Specification and technical data: The Master delivers precision sanding. It encapsulates the essence of our 75 years’ experience in sanding technology. This means it comes equipped "out of the box" with all the features essential for fast, reliable production of perfect surfaces—nothing more, nothing less. The core model Kündig Master is fitted with a calibration roller and a sanding pad unit, based on a proven design that guarantees long-term maintenance of high sanding precision—even across its generous working width of 1350 mm. In addition, a control unit is integrated for fast and intuitive operation. Sanding units – Proven combination The sanding system relies on a tried-and-tested combination of calibration roller and sanding pad. For optimal workpiece guidance, a parallel-sprung steel pressure roller is fitted at the machine infeed, with rubber pressure rollers placed between the sanding units. Calibration Unit (R): The calibration unit consists of a grooved rubber contact roller of proven hardness. It is ideal for calibration tasks, even for higher material removal rates if required. The contact roller level is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Segmented sanding pad (E): Equipped with the E-Plus configuration, the fine sanding unit features—not pneumatically, but—an electronically controlled, segmented sanding pad with a scanning width of 35 mm. This enables even more precise fine sanding at the edges of workpieces. The edge pressure of the sanding segments is automatically regulated, but can also be precisely adjusted via the touchscreen to further refine the finish around the workpiece edges. Changing the graphite glide belt is also quick and easy. Equipment – At a glance Construction: In terms of robustness and durability, the Master is on par with our other model ranges. It benefits from the same solid construction that makes all of our machines long-term investments, and is designed to deliver precise sanding results for many years. Upper section adjustment: For over thirty years, we have equipped our machines exclusively with upper section adjustment. Why? Although it is more complex to engineer than table adjustment, it offers numerous advantages: Greater permissible workpiece weights, better long-term precision, and the consistent working height. Workpiece dimensions: Adjustment of the upper section (clearance opening) is motorized and finely regulated via touchscreen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, well-established standard dimension.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, WEBER KSF-3-1350 (CMC) Fine/Cross Sanding Machine with 3 sanding belts for premium fine, veneer, and high-gloss sanding. Features a constant working height in the following configuration: Machine Frame Heavy-duty welded steel construction to accommodate three sanding units and workpiece cleaning components such as workpiece air blow-off. Electrical control cabinet integrated into the frame. - Constant infeed height of 900 mm - Operator side and sanding belt change side on the left in the infeed direction - Heavy-duty height adjustment via spindle gear - High-quality transport table with conveyor belt - Continuously variable feed speed from 3–18 m/min, frequency controlled - Vacuum conveyor belt version with 1 vacuum blower (5.5 kW) and a vacuum channel up to the machine’s top edge - Safety features in accordance with CE standards - Electrical equipment per VDE regulations - Doors on both sides of the machine, with the belt change side featuring safety switches and inspection window for monitoring sanding belt oscillation - Includes an infeed and outfeed table with rubber-coated rollers Unit 1: Sanding aggregates designed for two-shift operation. - Belt run-off switch on wide belts coupled with oscillation - Automatic sanding belt length compensation - Contactless optical sanding belt tracking and self-cleaning on the belt change side - Oscillation adjustment on the belt change side - Maintenance-free DC braking - Extraction hoods with optimized airflow to meet TRK values Unit 1: Cross-belt unit with: - Pressure lamella belt with felt and graphite for long service life - ISD segmented pressure beam system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt air blow-off device Unit 2: CBF Combination Unit with: - Grooved rubber contact roller Ø 130 mm, rubber hardness 60 Shore - Cross-running lamella belt with separate 4.0 kW drive - ISA segmented pressure beam system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt air blow-off device Unit 3: Cross-belt unit with: - Pressure lamella belt with felt and graphite for long service life - ISD segmented pressure beam system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt air blow-off device Control System Operator terminal “SIEMENS” MP 377 12" Multi Panel - Graphical user interface via 12" color display - Program memory for 300 programs - All parameters set via program - WANDRES Micro-Cleaning (single brush version) Power sword brush with integrated micro-moistening of the linear brush (for optimum lacquer dust removal) Kodpfx Akoy A D Eijgjlt Technical Data: Working width: 1350 mm Drive Unit 1 (frequency-controlled Eco-Drive): 15 kW Drive Unit 2 (frequency-controlled Eco-Drive): 20 kW Drive Unit 3 (frequency-controlled Eco-Drive): 15 kW Drive CBF: 3 kW Drive vacuum blower: 5.5 kW Drive feed (frequency-controlled): 3.0 kW Drive height adjustment (frequency-controlled): 3 kW Sanding belt speeds (frequency-controlled): approx. 3 – 20 m/s Sanding belt size cross belts (W x L): 2x150x5100 mm Sanding belt size wide belt (W x L): 1370 x 2620 mm Workpiece thickness (min./max.): 4–140 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Širina 1350 mm Dolžina 3500 mm Višina 1200 mm Skupna teža 1200 kg. Pogon: 2 x 2,4 kW Podnožje Kljdpfx Aoxy Rddjkgot

Stanje: rabljeno, lastna masa: 8.563 kg, največja dovoljena obremenitev: 30.437 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2016, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, KRONE SD Cool Liner | Carrier 1350 refrigeration unit | lifting axle | pallet box | Krone axles with disc brakes | toolbox | approx. 9,520 diesel operating hours | tyres 385/65R22.5. Subject to errors, input mistakes, and prior sale. Kledpfxsv An A Te Akget

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.300 mm, višina brušenja: 160 mm, vrsta nastavitve višine: električni, dolžina brusnega traku: 2.150 mm, Heesemann JSM 1350 RC Wide Belt Sander Year of manufacture: 2025, new machine, currently the only exhibition unit available in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units with separate motors and infinitely variable belt speeds up to 18 m/s - Table extensions at infeed and outfeed - Industrial PC 15.6" - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Belt dimensions: 2,150 x 1,370 mm Kodpfx Ajwcqr Ajkgslt Belt speeds: 18 m/s Drive power: 15 kW Front calibration return roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System (EMS) - Doors with glass inserts - LED lighting inside the machine - Vacuum table prepared (bored) for connection of the vacuum blower - Vacuum blower (integrated in the machine) - Workpiece cleaning with oscillating air jet pipe - CSD (magnetic pressure beam) The machine is connected and can be inspected on site by appointment. If you have any questions, please do not hesitate to contact us.

Stanje: novo, Leto izdelave: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. intermediate lacquer sanding setup Special price for demonstration unit – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Consistent working height thanks to upper section adjustment - Working width: 1350 mm Kedpfx Ajk Dpp Sokgjlt - Top sanding, with 2 sanding units - Grooved rubber contact roller of proven hardness - Infinitely variable height adjustment of contact roller per abrasive scale - Electric lifting/lowering of the contact roller according to selected unit - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubberized pressure rollers between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking, and oscillation - Compressed air consumption approx. 2 l/min - Optimum safety with automatic instant stop and disc brake in case of belt break, etc. - Workpiece feed 2.2 kW with transport belt and drive roller - Vacuum device for entire worktable with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across whole working width - Over-thickness protection with immediate feed stop and lift-off mechanism - Infinitely variable chip removal adjustment - Electronic feed adjustment on control panel, stepless 3 - 15 m/min - PLC control with teach-in memory function - Pneumatic belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: Fully automated fast setup and feed activation - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 kW - Sanding belt dimension 1350 x 2000 mm Perfect - Equipment Features: - High-quality swiveling plexiglass control panel - 10" touch screen - Industrial control system - Automatic pressure regulation and memory for sanding pad elements - Electronic compensation of abrasive belt grit size - Job and operating hour counters Lacquer equipment - Infinitely variable sanding belt speed on 2nd unit - Blast nozzles for sanding belt cleaning of 2nd unit, operation-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with the machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-blow-off with fan Location: 54634 Bitburg – Immediately available –

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, številka stroja/vozila: 2475958, moč: 56 kW (76,14 KM), nosilnost: 450 kg, dvižna višina: 41.150 mm, dolžina platforme: 2.440 mm, širina platforme: 910 mm, skupna masa: 20.400 kg, transportna dolžina: 11.860 mm, transportna širina: 2.490 mm, transportna višina: 3.050 mm, vrsta goriva: dizel, velikost pnevmatike: 445/50D710, barva: oranžna, Oprema: UVV varnostni pregled, pogon na vsa štiri kolesa, zapora diferenciala, Tehnični podatki Leto izdelave: 2012 Delovna višina: 43,30 m Višina platforme: 41,30 m Stranski doseg: 24,38 m Vrtenje: 360° Nosilnost: 450 kg Dolžina košare: 2,44 m Velikost platforme (D x Š): 0,91 m x 2,44 m Skupne mere (D x Š x V): 11,86 m x 2,49 m x 3,05 m Plezalna sposobnost: 45% Vozna hitrost: 5,2 km/h Teža: 20.400 kg Popolnoma delujoč, splošno uporabno stanje, UVV Kledpfx Akoyqywcegot

Stanje: rabljeno, Schulz gravity roller curve conveyor, right, with straight section 90°-450-390 IR795+1350-450-390 RA1201 Roller curve: Angle: 90° right Usable width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: continuous round belt, curve + straight section Scope of delivery: including double-sided lateral guide rails, without supports (supports available on request) Optional accessories: 2 pairs of double supports, height-adjustable, top of roller +/-100 mm Frequency inverter for stepless speed adjustment Price plus VAT, ex central warehouse Dr. Sonntag KG 97076 Würzburg For individual, expert advice, simply contact us. Please reach out to us by phone or email. We'll be happy to assist you in planning and implementing your projects. We look forward to hearing from you soon. Best regards, Kodpfxsk Aa Ipj Akgjlt Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Stanje: novo, Leto izdelave: 2025, - Shearing force: 1,350 tons - Capacity: up to 50 tons per hour - Side compression force: 2 x 180 tons - Clamp pressing force: 250 tons - Motor: 396 kW - Machine weight: 120,000 kg - PLC controlled - Remote control available Klodpfx Akjgv Abpegot - Adjustable output length

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2017, skupna dolžina: 13.430 mm, skupna širina: 2.500 mm, skupna višina: 2.650 mm, velikost pnevmatike: 385/65/22.5, barva: drugo, Leto izdelave: 2017, Oprema: ABS, = Dodatne možnosti in oprema = - Škatlasti zabojnik - Zadnja vrata - Zračno vzmetenje = Dodatne informacije = Konfiguracija osi Klsdpfx Aksyxf H Tegjt Dimenzija pnevmatik: 385/65/22.5 Blagovna znamka osi: Schmitz Zavore: kolutne zavore Teže Lastna teža: 8.532 kg Nosilnost: 30.468 kg Dovoljena skupna masa: 39.000 kg Funkcionalno Znamka nadgradnje: CARRIER VECTOR 1350 Hladilni motor: dizelski in električni Stanje Poškodbe: nobenih Identifikacija Registrska oznaka: QAPN532

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-19, največja dovoljena obremenitev: 1.105 kg, skupna masa: 1.350 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.050 mm, širina tovornega prostora: 1.330 mm, višina nakladalnega prostora: 430 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, SARIS CW 205 133 1350 2 NEW VEHICLE Internal dimensions: 205cm x 133cm Side wall height incl. railing: 43cm Loading deck height: 52cm Gross weight: 1350kg Payload: 1100kg Braked single axle low loader AL-KO overrun and handbrake Kodjrk Ik Hjpfx Akgslt 1350kg axle with brake Low chassis Fully welded hot-dip galvanized steel frame 15mm thick, durable phenolic plywood side panels Steel railing Rear tailgate foldable and removable with tension lock 15mm thick, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing rings with 400kg tensile force 14" reinforced C-rated tyres M+S tyres Net/rope hooks on frame 13-pin plug Front position lights Rear lights with reversing light, fog light and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Foldable and removable front panel - Loading ramps - SARIS light alloy wheels - Complete LED lighting - Anti-theft device - Fine-mesh or coarse-mesh net - H-frame - Mesh extensions in various heights, also as closed version - Flat tarp with or without bow - High tarp, 120cm - Rear supports Further accessories available on request! Plus shipping to Gera and vehicle registration document €100 net Images are examples and may show accessories subject to a surcharge. Haven’t found the right trailer yet? We have 50–100 vehicles permanently in stock and ready for immediate collection. The workshop is open weekdays 8:00–17:00 for all types of repairs. Specialist for axle repairs, also for caravan trailers. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come by directly.

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Klsdpjt Hw Shofx Akgot Payment: strictly net – upon receipt of invoice

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Detection head 350 x 200 mm Usable height 145 mm Intralox belt 1350 x 300 mm With faulty product ejection into a closed container Klodotwq I Eopfx Akget Year of manufacture 2018

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Čistost: 99,999 Klodpfx Aexn Upyokgot Kapaciteta: 21,3 m3/h

Stanje: novo, Load capacity: 15,000 kg Height: 790 - 1350 mm Width: 1200 mm Weight: 65.0 kg Features: - Robust construction - High load stability - Powder-coated in RAL 5010 gentian blue - With height adjustment - CE marking Kledjxabxlspfx Akget Technical details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15.0 t - Height adjustment: 790 - 1350 mm - Support surface: 1200 x 120 mm - Space requirement approx.: 1350 x 720 x 1350 mm

Stanje: rabljeno, Leto izdelave: 2001, vrsta prenosa: drugo, prva registracija: 01/2001, prevoženi kilometri: 1.001 km, voznikova kabina: drugo, Vehicle location: Bovenden. 13-ton rear axle, disc brakes, air suspension. From MAN TGA 18.360 4x2, wheelbase 3600 mm. Axle ratio 1 to 3.36 (37-11). ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Kljdpfx Asi Rpkbjkget

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, nosilnost: 2.500 kg, Teleskopske vilice ISO razred: ISO razred 2 = 1.000 - 2.500 kg Stanje: Pripravljene za uporabo in popolnoma delujoče Tehnično stanje: dobro Opis: Letnik 2016 ISO 2A (41 cm) Nosilnost 2500 kg Razpon odprtine 1350-2350 mm Vilice 1350 mm 145x45 ID OS1815 Ksdex Rac Tjpfx Akgjlt

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, nosilnost: 3.500 kg, dolžina vilic: 1.350 mm, Fork positioner ISO class: ISO class 3 = 2,500 - 4,999 kg Kjdpfxjt S N U Ee Akgolt Technical condition: good

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)), Diameter: 250 mm Belt speeds: approx. 18 m/s, 22 kW Anti-wear brake unit, automatic length adjustment Dust extraction device controlled according to the workpiece; reverse-running abrasive belt; abrasive grain compensation via computer. Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: Ksdex Rdn Tspfx Akgslt 1.0 - 18 m/s Drive: 15 kW Incl. stepless sanding speed adjustment via electronic frequency controller, with double quantity of suction holes for the dust extraction device. Anti-wear brake unit, automatic adjustment for varying abrasive belt edge lengths, dust extraction device controlled depending on the workpiece, switchable, reverse-running abrasive belt. 2 Pressure beams with selective pressure regulation system – CSD® system Continuously adjustable pressure of individual pressure elements, for both single and multiple feed. Distance: 32 mm. Part tolerance compensation up to 2 mm by maintenance-free pressure magnets. Working width as well as start and end of sanding on the pressure beam are electronically controlled. The pressure elements are actuated by electro-lifting magnets, allowing the sanding shoe pressure to be infinitely variable as the workpiece passes through the machine. This innovative CSD® technology ensures always consistently proportional pressure depending on the shoe’s overlap on the workpiece. The risk of edge-through (“burn through”) is almost eliminated thanks to this continuous dynamic pressure control.