širokopasovni brusilnik 1350 mm MFA 6

HEESEMANN PONCEUSE DE SURFACE MFA 6 1350 mm

Stanje: rabljeno, Leto izdelave: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of Manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm Nedou Afu Rspfx Agxela - U-shaped layout with corner transfer Consisting of: 1. Infeed conveyor, length 3,050 mm 2. Open space for sanding machine (optional) 3. Automatic spray machine VEN SPRAY PERFECT, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. Jet dryer VEN DRY AIR JET, length 4,160 mm 6. 180-degree corner transfer with jet dryer 7. Supply air system for corner transfer, 25,000 m³/h 8. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 9. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 10. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Discharge area, belt of UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Finger Jointing Line for Cross-Sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL – Tilt Destacking Station - SH/4t - 1.75x1.75x6.00 m - 4 t – minimum length 2.50 m, semi-automatic singling of the package. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions: 1.75 x 1.75 x 6.00 m. Maximum stack load: 4 t Minimum wood length: 2.5 m 2. HOWIAL – Lamella Singling Unit VE 1 to cross-cut saw. With pneumatically controlled tongues for sorting material marked for defects, placing it onto the underlying roller conveyor. 3. HOWIAL – Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and recording system for automatic moisture detection and monitoring using the resistance method in cycle measurement mode. 4. Gann DMT-8 Digital wood moisture measurement, control, and recording system for automatic moisture detection and monitoring using the electrical resistance principle in cycle mode. Installed in a large control cabinet with inkjet printer. 5. HOWIAL – Cross-Cut Saw AS-30 B Pneumatically operated under-table cross-cut saw with two automatic feed units and automatic cross-cutting. Control by special photo cell for detecting fluorescent line marks. Automated waste removal possible. Saw motor power: 7.5 kW Saw blade diameter: 700 mm Feed drive: approx. 2 x 1.5 kW Air pressure: 8 bar Max. feed speed: approx. 60 m/min 6. HOWIAL – Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width: 350 mm Belt length: 2000 mm Belt speed: 0.4 m/s 7. HOWIAL – Double Roller Conveyor RO-2, 6.00 m long Incl. cross transport. Finger jointing automation feeding. Driven by round belt, all rollers are powered. Cross transfer via chain conveyor. Eject ± moisture to the right. Adjustable transport speed up to 100 m/min. Length: approx. 6.00 m Roller width: approx. 400 mm Diameter: 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Feed-in lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Press force: 5 - 22 t Spindle diameter: 50 mm Finger profile: 15/15 Spindle speed: approx. 6000 rpm Total electrical connected load: approx. 62 kW Machine weight: approx. 9 t Gluing system: OEST comb application system for PU Modern Telemechanique PLC (SPS) Control 9. HOWIAL – Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical data: Height: 920 mm Length: approx. 12,000 mm 10. Safety Guarding Fences including safety switch Nodpfx Asi Ezx Dogxela 11. Finger Joint Test Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Adjustable support distances, built-in measuring scale, automatic calculation of support distances in software. Fully automatic test process triggered by mouse click on PC (not included). Alternatively, test process can be triggered by push-button on front panel. Connection to any standard PC or laptop (Win 2000/XP) via included RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. compression force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISMANTLING

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms Nljdpfx Asfi Tg Hjgxja External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.300 mm, višina brušenja: 160 mm, vrsta nastavitve višine: električni, dolžina brusnega traku: 2.150 mm, Heesemann JSM 1350 RC Wide Belt Sander Year of manufacture: 2025, new machine, currently the only exhibition unit available in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units with separate motors and infinitely variable belt speeds up to 18 m/s - Table extensions at infeed and outfeed - Industrial PC 15.6" - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration return roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System (EMS) - Doors with glass inserts Nlodpjwcqr Aofx Agxoa - LED lighting inside the machine - Vacuum table prepared (bored) for connection of the vacuum blower - Vacuum blower (integrated in the machine) - Workpiece cleaning with oscillating air jet pipe - CSD (magnetic pressure beam) The machine is connected and can be inspected on site by appointment. If you have any questions, please do not hesitate to contact us.

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Wemhöner Basic 1000 Plus - letnik 2008 - zelo dobro ohranjen, malo rabljen * Tip KT-MB-28/15-240 * z avtomatskim pin sistemom in inline obračalnikom * 2 mizi z avtomatskim Vario-Pin sistemom * s teflonsko prevleko za predlepljeno folijo * sistem polaganja folije za pin mizo (predlepljena folija) * Velikost grelne plošče: 2800 x 1500 mm * maksimalna velikost obdelovanca 2.540 x 1.250 mm * Membrana: da * Rezalna postaja * Regalni paternoster za folije, višina 3,2 m, s 14 obesnimi palicami * PLC krmiljenje Siemens S7 * Upravna enota za PLC krmiljenje SIEMENS TP 270 (touch screen) * Samodejno napenjanje membrane * Instalirana moč 38,5 kW * maksimalni tlak v komori 6 bar * maksimalna odprtina stiskalnice 150 mm * 6 cilindrov z Ø 125 mm Nlodpsxbcudsfx Agxoa * Obratovalna napetost 400 V 50/60 Hz * Višina komore stiskalnice 40/60 mm * maksimalni pritisk stiskalnice 2.400 kN * Delovni tlak hidravličnega sistema 320 bar

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Stroj za profiliranje parketa po vzdolžni strani 5+5 motorjev Hitrost do 60 m/min Minimalna delovna širina 70 mm (65 mm brez posnetja) Nsdpfx Aoxwnhbogxsla Diamantna orodja za T&G profil + dovodni tračni transporter

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit Nsdog A D Anepfx Agxola 2 combination sanding unit with pad Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen,

Stanje: novo, Model stroja: Komatsu PC290 Dolžina roba: 1400 mm Tip roba: Delta Kapaciteta: 1,7 m3 Nlsdpfx Asx Tawpegxja Za podrobnejše informacije nas kontaktirajte.

Stanje: zelo dobro (rabljeno), COSTA LEVIGATRICI Series S model SN with 5 units - First unit: electronically segmented transverse belt - Second unit: 1 roller - Third unit: 1 roller - Fourth unit: electronically segmented super-finishing pad - Fifth unit: electronically segmented transverse belt Nodpjr Iyvmjfx Agxola Working width: 1350 mm Vacuum system Inverter on all belt units Inverter on feed conveyor Outfeed brush unit Outfeed blower unit