Berg & Schmid (Imet) Bs 350 Afi-E + Esc nakup rabljenega (76.352)

Stanje: novo, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Saw band length: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automats of the SBS Series The SBS series stands out for its advanced technology, high quality, durability, and an exceptionally extensive standard configuration. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the blade) • Jog mode for positioning • Bundle clamping, electrically and hydraulically prepared • Chip conveyor The SNC 20 control enables easy and intuitive input of up to 20 different sawing jobs (length and quantity). Upon entering the required dimensions, the control automatically calculates the saw kerf and the number of feed cycles. Additionally, the error code display system provides rapid fault analysis and troubleshooting. Nwodpefg E Hvsfx Ah Uog

Stanje: novo, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangular 610 x 450 mm Saw blade length 5320 x 34 x 1.1 mm Blade speed 15 - 100 m/min Table height 820 mm Total power requirement 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height sensor (automatic cut start detection) Automatic feed unit via ball screw incremental feed with automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure switch-off in idle mode Mechanical swarf removal brush, feed vice opens on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple cutting jobs with various cutting lengths and quantities. Nwodefu Nbbjpfx Ah Usg Automatic feed unit, 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. Fully hydraulic control of saw frame and clamping devices Selection of 3 different material feed rates Visualization of the entire workflow with simple data entry

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Blade speed: 15–100 m/min Table height: 844 mm Nedpfx Ajfg E Hljh Uowg Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space required approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to miter cut, feed regulator, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning/disinfection) • Energy-saving and low-vibration due to miter cutting • Ergonomic, safe, free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs to monitor all safety functions • Large-diameter wheels (520 mm) • Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to the material or, for series cuts, cut immediately 4. Saw blade off 5. Raise frame to just above the material 6. Open vise

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Nwedpfofd Abaex Ah Ueg Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: novo, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H Nwsdpfsfgyifox Ah Ujg with pusher system P 15. P 30 (option), Fast, smooth and ergonomic sawing Specially developed for cutting profiles, beams, and solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting with the K-tech 800H model, the machine is equipped as standard with an additional horizontal clamping vise. The interaction of the hydraulic saw frame lowering, material positioning, and the pusher system is controlled by CNC. The machines come standard with the environmentally friendly 'B&S Clean Cut cutting system' with minimal quantity lubrication, saving on cleaning effort and conserving resources. CNC Control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher system, feed and positioning unit, is fitted with 'double-opening clamping jaws' controlled hydraulically. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is constructed separately and is guided by ball-bearing linear guides, a ground rack, and a frequency-controlled, robust gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 – 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirements approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H, with push system P 30. P 60 (optional). Fast, smooth, and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. Nedpfefgyigox Ah Uewg The machines come standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeder, and positioning system is equipped with "double-sided opening gripper jaws" that are hydraulically actuated. This ensures safe gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is built as a separate unit and is guided via ball-bearing linear guides, a precision-ground rack, and a frequency-driven, robust geared motor.

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Control system: CNC Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.63 t Space required: approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 255 Super VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cutting start detection) • Frame and gearbox made from a single casting, very quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) Nsdpfx Asd Iipzjh Uswg • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cutting! • Optimize workflows through CNC control Input options for various parameters such as quantity and material length, automatic offset calculation for the cutting channel • CNC control for 10 different sawing programs with 99 sub-programs each for different lengths and quantities (e.g. 1 sawing program with various section lengths) • Automatic feeding unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, remnants length 170 mm.

Stanje: novo, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820x610 mm Cutting range at 45 degrees: round 550 mm Cutting range at 45 degrees: square 550 mm Cutting range at 45 degrees: flat 550x600 mm Cutting range at 60 degrees: round 370 mm Cutting range at 60 degrees: square 370 mm Cutting range at 60 degrees: flat 370x600/450 mm Nsdpfsfg E Hmsx Ah Uewg Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double-mitre band saw for rapid cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, featuring large-radial center positioning. The work table is mounted with high-quality preloaded bearings to ensure very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning device, is equipped with “dual-side opening grippers” which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is structurally separate and guided via ball-bearing linear rails, a precision-ground rack, and a robust, frequency-driven gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Band speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column double mitre bandsaw for fast cutting with Pusher System P15. Option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Nwodpefg E Hnefx Ah Ueg Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures seamless interaction of linear encoder and self-braking positioning motor in combination with reliable hydraulic braking via large-radial centre positioning. The work table is mounted on high-quality preloaded bearings, which ensure extremely smooth rotation. CNC control A CNC control enables programming of up to 90 cutting programs with different cutting lengths, quantities and mitre angles. Positioning system with double-sided clamps The B&S pusher system—feeding and positioning system—is equipped with double-sided hydraulic gripping tongs. This ensures secure gripping and transportation of materials and bundles deviating slightly from the ideal shape. The pusher system is a separate unit and is guided by ball-bearing linear guides, ground rack, and a frequency-driven robust gearbox motor.

Stanje: novo, Cutting range at 90°: round 310 mm Cutting range at 90°: square 280 mm Cutting range at 90°: rectangular 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total connected load: 2.2 kW Machine weight approx. 0.99 t Space requirement approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet operation with minimal vibration • Removable chip tray (disinfection) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Top access to saw, material and feed unit • Safety cover can be folded up • Fine feed adjustment • Semi-automatic cut! • Optimize workflows with CNC control Njdpfx Ahjd Iiprj Uswg Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different saw programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with various cut lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions L x W x H: 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and optimal performance for cutting special steels. • The electro-welded machine frame and steel saw frame fulfill all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and speed adjustable. • All machine movements (saw frame, vice, feed, saw band guides) operate using modern linear guides with high static and dynamic load capacity, ensuring extremely low sliding friction. Nwedjfg E Hpopfx Ah Ueg • Another key feature is the material positioning rollers, driven by a hydraulic motor. They move at a right angle to the material, allowing optimal material clamping. • Thanks to the height control of the saw band position, the operator can place the band close to the top of the material. After the cut, the band automatically returns to its previous position. Remaining in the lower position can also be selected as an alternative. During the cutting cycle, the software compares cutting load with preset parameters, allowing the sawing system to stop if irregularities are detected. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. • Finely ground carbide inserts that clamp the saw band, complete with side-hardened and adjustable guide rollers. The adjustable band guide moves automatically as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder controlled by the machine software. Tension is automatically relieved after a set period if the machine is in standby mode or after a cycle has finished. • Automatic CNC-controlled versions are available in the X-TECH 900 / 1200 models, with a feed length of 500 mm for the high-production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, to ensure precise positioning even under maximum load. • All guided movements are operated by four recirculating ball guides with a high capacity for static and dynamic loads, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 250 Super VA-I MPS • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover (a). • Material height sensor (c). (Automatic cut start detection) • Frame and gearbox cast in one piece, very quiet cutting and low vibration • Removable chip tray (for cleaning/disinfection) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cut! Automatic sawing with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering required quantity and length: material infeed, cutting process, and piece counting until the program is completed • MPS control for setting the required number of feed strokes • All important machine data is displayed on the LED display during the cutting process (power consumption, cutting time, quantity) Nwsdpfx Ahod Iip Aj Ueg • Entered data is stored in RAM memory • The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or by reverse feed function, repeatable 1 - 29 times, remaining workpiece length 210 mm

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Folding safety cover • Fine feed adjustment Nwsdpfx Asupw R Aoh Usg • Semi-automatic cut! • Optimize workflow with CNC control Parameters such as quantity and material lengths can be entered, with automatic kerf compensation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with various section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm. Included: - Micro-spray unit - Leveling elements

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m Nedpfxed Iip Ro Ah Uowg SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR

Stanje: rabljeno, 1 rabljeni avtomatski tračni žagalni stroj Proizvajalec: Berg & Schmid Tip: X Tech 410 Tehnični podatki: Nodpfx Aeytvqqsh Uowg Območje rezanja: okroglo 410 mm ali ploščato 410 x 410 mm - Sodobno CNC krmiljenje z 2 osmi - Nadzor poteka tračnega lista z avtomatsko prilagoditvijo pomika - Samodejni začetek reza za prvi rez, minimalna dolžina ostanka 15 mm - Brezstopenjski, frekvenčno reguliran pogon žage - Regulacija vpenjalnega tlaka za tanke cevi in profile - Hidravlično gnani transporter za ostružke - Samodejna dvostranska razbremenitev tračnega lista - Hidravlično napenjanje tračnega lista - Podajanje materiala prek preciznega krogličnega vretena in linearnega vodila Pogonska moč: 5,5 kW Delovna višina: 730 mm Barva: platinasto siva RAL 7036 in turkizna RAL 5018

Stanje: novo, Saw blade diameter: 300 mm Cutting capacity at 90 degrees: round 102 mm Cutting capacity at 90 degrees: square 90 mm Cutting capacity at 90 degrees: flat 120x80 mm Cutting capacity at 45 degrees: round 90/80 mm Cutting capacity at 45 degrees: square 80/70 mm Cutting capacity at 60 degrees: flat 90x70/85x70 mm Total power requirement: 1.5/2.0 kW Machine weight: approx. 0.135 t Space requirement: approx. 0.5 x 1.05 x 1.0 m The versatile professional metal circular saw. Outstanding in both performance and price. · For mitre cuts to the left up to 45° · Suitable for cutting steel, stainless steel, and to a limited extent, aluminium profiles · Spindle vise with double clamping arm for burr-minimized cuts · Taper safety clutch to protect saw blades · Two speeds: 33 + 66 rpm Nwsdpfsfg Rlasx Ah Usg · Automatic cooling system, direct to the saw blade · Double-bearing saw head · 24 V safety switch in the handle with restart protection · Length stop, assembly tools included · Fully enclosed, robust cast construction · Mitre adjustment on operator's side · Machine base (optional) ATTENTION: Price does NOT include a saw blade!!! (Saw blade price: €93 / €123)

Stanje: novo, Premer žaginega lista 315 mm Območje reza pri 90 stopinjah: okroglo 108 mm Območje reza pri 90 stopinjah: kvadrat 93 mm Območje reza pri 90 stopinjah: pravokotnik 150 x 90 mm Delovna višina 920 mm Hitrosti vrtenja žaginega lista 17+33 ali 33+66 obr/min Skupna potrebna moč 1,5/1,8 kW Teža stroja pribl. 0,328 t Potreben prostor pribl. 0,8x0,9x1,7 m AKCIJSKA CENA!!! Visoko zmogljiva vertikalna krožna žaga VKS 315 (Artikel 20150) • Poševni razrez levo 60° + desno 45° • Vpenjalna glava z dvojnim vpenjalnim krakom (4-kratno fiksiranje) za minimalne ivice in stransko hitro pomikanje Nsdpfx Aod Iin Seh Ujwg • Žagalna miza z veliko vrtljivo ploščo in posebej stabilno vpenjalno glavo za optimalno vpenjanje materiala • Robustno prizemsko vodilo žagine glave (nastavljivo v obliki lastovičjega repa) • Avtomatsko hlajenje • Podstavek stroja s predalom za ostružke • Kovinski ročaj za visoko vpenjalno silo POZOR: Cena je brez žaginega lista!!! (Cena žaginega lista 109,- EUR)

Stanje: novo, Leto izdelave: 2024, premer žaginega lista: 315 mm, največja višina reza: 150 mm, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, vrtljajska hitrost (min.): 17 obr/min, največja hitrost vrtenja: 33 obr/min, BERG+SCHMID Vertical Circular Saw Model VKS 315 Speed: 17 + 33 rpm • Mitre cuts: left 60° + right 45° • Vise with double clamping arm (4-way locked) for burr-free cuts and lateral quick adjustment • Saw table with large rotary plate and particularly stable vise for optimal material clamping • Robust prism guide for the saw head (adjustable dovetail guide) • Automatic coolant system • Machine base with chip drawer Nedpfx Asrrvn Ash Uswg • Metal lever for high clamping force • Counterholder with spring package included Saw blade dimensions: 315x40mm Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Delivery time: from stock Waiblingen Beinstein

Stanje: novo,

Stanje: novo,

Stanje: novo, Cutting diameter: 240 mm Bandsaw blade dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Cutting speed: 35 + 70 m/min Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangle: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangle: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight: approx. 0.26 t Space requirement: approx. 0.9 x 1.6 x 1.74 m • Miter cut left 60° • Quick-release vice with fast-clamping mechanism • Quick-release lever for easy handling • Frame and gearbox made from a single casting, ensuring very quiet and low-vibration operation • Electronic monitoring of blade tension and blade breakage, with bandsaw blade cover Nedsd Iip Sspfx Ah Uowg • Carbide bandsaw blade guides • Large machine bed • Machine base (supplied disassembled) with automatic coolant system The AutoCut system consists of: hydraulic cylinder, feed rate control, spring package, limit switch Automatic saw frame lowering via hydraulic cylinder, infinitely variable feed rate, with limit switch at end of cut. Rapid lowering of the saw frame from the resting position to the workpiece, then switch to standard saw feed (for example, for marking). Manual operation: the hydraulic cylinder functions as a brake cylinder (for example, for notching). The brake cylinder allows the saw to be positioned at any point during the return stroke.

Leto izdelave: 2007, stanje: dober (rabljeno), številka stroja/vozila: 073759001, Offer 22489 Technical data: - Cutting range at 90° round 320 mm - flat 320 x 320 mm Nwedpfx Ahjim Ilde Ujg - Material feed automatic - Saw band dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - Hydraulic lifting and lowering of the saw frame - Upper lift limitation for saw frame - Infinitely variable cutting pressure adjustment - Hydraulic material vise - Chip conveyor screw - Coolant system - Discharge roller table 2500 mm - Drive motor 400 V / 4.0 kW - Required space approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

Stanje: novo, Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 400 x 310 mm Saw band length: 3820 x 34 x 1.1 mm Band speed: 22 - 88 m/min Table height: 930 mm Total power requirement: 2.2 kW Machine weight approx. 0.8 t Space requirements approx. 2.22 x 1.2 x 2.1 m PROMOTIONAL Double Miter Band Saw, Semi-Automatic Hydraulic • Miter left 60° + right 45° • Industrial-grade hydraulics • Optimum access to material Njdewinykspfx Ah Ujwg • Ammeter for monitoring: - Cutting force optimization - Band life optimization - Tracking of cutting progress • Hydraulic vice—automatic clamping/release • Material turntable with ball bearings • Quick-release sliding vice • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast feed down to material start 4. Saw band off 5. Raise frame to just above material 6. Open vice

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90°: square 210 x 210 mm Cutting range at 90°: flat 290 x 210 mm Cutting range at 45°: round 220 mm Cutting range at 45°: flat 210 x 200 mm Cutting range at 45°: square 200 x 200 mm Cutting range at 60°: round 140 mm Cutting range at 60°: square 130 x 130 mm Cutting range at 60°: flat 140 x 130 mm Saw blade dimensions: 2965 x 27 x 0.9 mm Nwjdpfoxaauxox Ah Usg Cutting speed: 35 + 70 m/min Working height: 940 mm Total power requirement: 1.1 / 1.3 kW Machine weight approx.: 290 kg Dimensions (L x W x H): 1250 x 1500 x 1700 mm Features: - Compact / robust manual bandsaw (INDUSTRIAL) * Suitable for cutting solid material and profiles - Ball-bearing support table for mitre cuts from 60° left to 45° right * Durable and easy mitre adjustment - Two selectable cutting speeds (37 + 74 m/min) - Infinitely variable feed rate of saw bow - Automatic shut-off at the end of cut - Manually adjustable quick-release vice * Including quick-release lever - Machine base with integrated coolant system - Electrical monitoring and display of the machine - Operating manual BERG SCHMID Auto-Cut-System = 3-stage system 1. Automatic lowering & automatic saw cut 2. Manual operation – lowering & saw cut 3. Rapid lowering of saw frame without saw cut

Stanje: novo, Cutting diameter: 305 mm Cutting capacity at 90° (flat): 350 x 200 mm Cutting capacity at 90° (square): 260 mm Cutting capacity at 45° (flat): 230 x 200 mm Cutting capacity at 45° (round): 250 mm Cutting capacity at 45° (square): 230 mm Cutting capacity at 60° (flat): 170 x 100 mm Cutting capacity at 60° (square): 155 mm Cutting capacity at 60° (round): 175 mm Speed range: 18 – 110 m/min Saw blade dimensions: 3,375 x 27 x 0.90 mm Working height: 880 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 840 kg Space requirement approx.: 1,900 x 1,850 x 2,000 mm Features: - Mitre cuts left 45°: automatic operation Nwsdpfx Aexabacsh Uog - Mitre cuts left 60°: semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gearbox single-cast construction - Extremely quiet and low-vibration cutting - Removable chip tray (for cleaning) - Shock-proof and ergonomic control panel with oil-resistant EPDM cover - Excellent accessibility to saw, material, and feed unit - Safety cover foldable - Fine adjustment of feed rate - Semi-automatic cutting BERG SCHMID CNC Control: - Input of various parameters such as piece quantity and material length, automatic kerf compensation - Up to 10 different sawing programs, each with 99 sub-programs - For different lengths and quantities, e.g., one cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm - Single-stroke feed carriage 500 mm Manufacturer's information: When installing this saw in a network with a residual current circuit breaker (RCCB), this should be all-current sensitive and rated at no less than 300 mA.