Bacciotini 2007 Bacciotini Pit Stop Af Speed nakup rabljenega (41.038)

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 506 8026 / 479 6312 / 7028, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 20 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 2.500 mm, višina obdelovanca (maks.): 160 mm, število osi: 4, vrsta aktuacije: električni, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Prodam kompletno, delujočo in rabljeno proizvodno linijo za varjenje in čiščenje podjetja Rotox, leto proizvodnje 10/2007. Linija je bila uporabljena v podjetju EUROCOLOR pri proizvodnji PVC oken in vrat (profili Schüco in Rehau). Smer delovanja: od desne proti levi (desna palica na strani varilnega stroja je fiksna). Sestav linije: ● Varilni stroj s štirimi glavami Rotox SMK 506 4K ● Avtomatski stroj za čiščenje vogalov Rotox EPA 479 (štiriojna, CNC) z vrtljivo postajo WT 427 ● Hladilna postaja FIMTEC Slike in dokumenti so na voljo na tej povezavi: 1. Varilni stroj s štirimi glavami Rotox SMK 506 4K ● Leto proizvodnje: 10/2007, serijska številka stroja: 506 8026 ● Fiksna stran stroja: desna (smer delovanja od desne proti levi) ● Razporeditev profilov na mizi: zunanja stran okna navzdol ● Dodatek za prekritje: 6 mm ● Omejitev preliva: 0,2–2,0 mm, samodejno nastavljivi noži od zgoraj in od spodaj (uporaba pri nastavitvi okoli 0,2 mm) ● Največja dimenzija varjenja: 2500 x 2500 mm (v praksi so varjeni okvirji do ok. 2650 x 2650 mm) ● Najmanjša dimenzija varjenja: 320 x 420 mm, z avtomatskim transportom ● Varjenje okvirjev: min. 350 x 500 mm – maks. 2500 x 2400 mm ● Varjenje profilov v obliki U in T ter okvirjev vrat (varjenje tipa C) ● Ogrevani noži za omejevanje spoja ● Hitra menjava teflonske folije ● Zaščitna ograja stroja ● Sistem za sprejemanje podatkov iz varilnega stroja ● Števec delovanja: ok. 385.000 izvedenih varilnih ciklov ● Parametri po navedbah proizvajalca: priključna moč maks. 10 kW, napetost 400 V, tok 20 A, 50 Hz, tlak zraka 6–7 bar, poraba zraka ok. 150 NL/varjenje, višina profila 45–160 mm, maks. širina profila 140 mm, teža ok. 3000 kg. Obdelovan material: PVC profili Redpozp Nz Tefx Altjcd 2. Avtomatski stroj za čiščenje vogalov Rotox EPA 479 + vrtljiva postaja WT 427 ● Leto proizvodnje: 10/2007, serijska številka stroja za čiščenje: 479 6312 ● Vrtljiva postaja WT 427, povezana z EPA 479: serijska številka stroja 7028, dimenzije 5700 x 2500 mm, smer transporta v desno ● Fiksna stran stroja: desna ● Razporeditev profilov na mizi: zunanja stran okna navzdol ● Največje dimenzije obdelanih okvirjev: 2500 x 2500 mm ● Agregat za vrtanje lukenj za tečaje okvirja Siegenia in roto – enota z glavo s šestimi vretenci, pnevmatski pogon ● Vrtanje lukenj za tečaje: 4 x Ø3 mm, 2 x Ø6 mm (glede na tehnično risbo) ● Oprema: 2x enota za rezanje vidne površine, 2x druga enota za rezanje vidne površine, 2x CNC enota za čiščenje pod tesnilom (pnevmatski pogon), enota za rezanje notranje površine navpično (okvir okna), enota za rezanje poševne površine do 23° z dodatnim naklonom/ukrivljenjem (čisto delovno rezanje), enota za rezanje notranje površine vodoravno, orodja za notranjo obdelavo, konturna plošča 170 mm (desna), noži za utore S=3,0 mm/G=0,5 mm (2 kos.), noži za ravno rezanje brez utora (2 kos.), podaljšek kabla nadzorne plošče ● Števec delovanja: ok. 9.863.552 očiščenih vogalov ● Opomba: natančne minimalne dimenzije profilov in varjenja, ki jih je mogoče očistiti v ročnem/avtomatskem načinu – za potrditev se obrnite neposredno na Rotox Polska 3. Hladilna postaja FIMTEC ● Leto proizvodnje: ok. 2021–2022 ● Kupljena pri GRAF Stroji so delujoči, razstavljeni – trenutno ne delujejo – pripravljeni za transport Kontakt EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Stroji so delujoči, pripravljeni za ogled in demonstracijo delovanja pred nakupom. Možna je razstavitev in pomoč pri nakladanju.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, potovalna razdalja osi X: 1.020 mm, pomik osi Y: 550 mm, pomik po osi Z: 635 mm, skupna višina: 2.630 mm, obremenitev mize: 500 kg, skupna masa: 7.000 kg, največja hitrost vretena: 12.000 obr/min, teža orodja: 7.000 g, število osi: 4, To vertikalno obdelovalno središče AWEA AF-1000 s 4 osmi je bilo izdelano leta 2017. Ima hod osi X 1020 mm, hod osi Y 550 mm in hod osi Z 635 mm. Opremljeno je z visoko hitrostjo vretena 12.000 vrt/min, stožčasto vpenjalno priključnico ISO 40 in 24-postajnim menjalnikom orodij. Vključuje rotacijsko mizo s 4 osmi in sistem za odvajanje ostankov. Idealno za kompleksne obdelovalne naloge. Za dodatne informacije o tem stroju nas kontaktirajte. • Dimenzije mize: 1200 × 550 mm • Razdalja od površine mize do tal: 915 mm • Hitrost podajanja: 10.000 mm/min • Razdalja med konico vretena in mizo: 100–735 mm • Razdalja med središčem vretena in stebrom: 640 mm • Motorji osi (X/Y/Z) kW/KM: 3,0/4,0; 3,0–4,0/5,4 • Tip ATC: ročni menjalnik • Kapaciteta skladišča orodij: 24 orodij • Potrebna moč: 30 kVA Rcsdpfxex D R Dfo Altod Dodatna oprema • Rotacijska miza s 4 osmi • Sistem za odvajanje ostankov (spiralni transporter) • Ročno kolo za daljinsko upravljanje • Dobavljen z navodilom za uporabo in certifikatom CE Dimenzije Globina stroja 3590 mm Tehnične specifikacije Velikost stožčaste vpenjalne priključnice ISO 40

Leto izdelave: 2007, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 205-043-095, TTB TGC 64 F – Year of Manufacture 2007 | CNC Tool Grinding Machine Completely overhauled by the manufacturer TTB Engineering SA, single ownership. For sale is a TTB TGC 64 F from 2007, a high-precision CNC tool grinding center for the production and re-sharpening of tools made from carbide, HSS, and other materials. The TGC series (Tool Grinding Center) was specifically developed for the manufacture of precision tools with micrometric accuracy. The machine is equipped with a reliable Fanuc control system and impresses with its high repeatability and stable long-term performance. Thanks to its 5-/6-axis configuration, the machine enables the machining of complex tool geometries and offers maximum flexibility for a wide range of applications such as drills, milling cutters, and special tools. Machines from TTB are characterized by their excellent thermal and mechanical stability, ensuring continuous production with consistent precision in the micron range—even over extended periods. Key features: Rcjdpfxoy D Sb Io Altsd CNC tool grinding center (5 or 6 axes) Fanuc control Suitable for carbide, HSS, and special materials High precision and repeatability (micron range) Ideal for production and regrinding of tools Robust Swiss construction, highly reliable The TGC model is the predecessor of the Evolution series and is still considered a proven and reliable solution for tool manufacturing.

Stanje: rabljeno, Leto izdelave: 1988, številka stroja/vozila: 1743, UV coating machine Billhöfer Gula Speed CGS JKN 112, year 1988 - Serial No. 1743 Minimum format: 300 x 500 mm Maximum format: 820 x 1120 mm Automatic Mabeg feeder Substrate weight: 60 to 500 g/m² cardboard Online video inspection possible via Skype Video Rcsdoh Axqujpfx Altsd We would be very pleased to welcome you for an on-site visit - more machines available from stock. Available immediately - can be inspected Located in Emskirchen / Nuremberg - test runs possible

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 1369, Kodak TSO-850 High-Speed Thermo-System / Curing System – Baking System Year of manufacture: 2007 – Serial No.: 1369 Maximum working width: 850 mm Electrical connection: 400V / 50Hz / 40A Online video inspection via Skype available We would be pleased to welcome your visit – more machines in stock Immediately available – can be inspected Located in Emskirchen / Nuremberg – test runs possible Rcjdpfxsh Aya Is Altod

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 131 153, Press force: 40 t Adjustable ram stroke: 8 - 50 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 310 mm Distance between uprights L-R: 820 mm Table clamping surface approx.: 810 x 450 mm Ram clamping surface approx.: 720 x 350 mm Through-hole in table: 600 x 110 mm Strokes per minute: 100 - 1,000 min⁻¹ Table height above floor: 1,030 mm Redpfx Aljuqc Agstjcd Power requirement: 19.5 kW Machine weight approx.: 6.8 t Additional equipment

Stanje: dober (rabljeno), Največja hitrost vrtenja glave: 30.000 vrt/min. Rodpfx Alszk U Stetocd

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 32 mm, skupna dolžina: 900 mm, poteza s peresom: 160 mm, skupna višina: 1.800 mm, skupna širina: 950 mm, globina grla: 630 mm, hitrost vretena (min.): 75 obr/min, dolžina mize: 800 mm, največja hitrost vretena: 2.800 obr/min, širina mize: 500 mm, skupna masa: 800 kg, moč: 1 kW (1,36 KM), Hitra radialna vrtalna naprava s fleksibilno roko, pnevmatično vpenjalno glavo, izstrelek 100–710 mm, vrtalna zmogljivost Ø 30 mm, hod vretena 160 mm, hitrosti vrtenja 80–2800 vrt/min, motor z dvema prestavami 1/1,4 kW, vreteno MK-4, samodejni pomiki, dimenzije 90 x 100 x 200 cm, teža približno 1000 kg. Redpfx Ajx Dmn Holtscd

Stanje: rabljeno, Leto izdelave: 2003, x-travel 1000 mm y-travel 800 mm z-travel 700 mm Control HEIDENHAIN iTNC 530 Total power requirement 50 kW Machine weight approx. 16 t Space requirement approx. m DEPO SPEED (Taiwan) Vertical gantry-type machining center with HEIDENHAIN CNC control Type 530 Type Speed 1008 Year of manufacture 2003 Table size 1,350 x 1,300 mm X-axis – cross-slide 1,000 mm Rcsdpet Hw Hrsfx Alted Y-axis – crossbeam 800 mm Z-axis – vertical quill 700 mm Maximum table load approx. 8,000 kg Installation height under spindle approx. 800 mm Maximum workpiece dimensions approx. 1100 x 900 x 600 mm Spindle taper HSK-A 80 Spindle speeds, steplessly adjustable 30 – 14,000 rpm Rapid traverse/feed rates for X/Y/Z axis 20 / 24 m/min Acceleration in XYZ-axis 3.5 m/s² Feed drive torque 42 Nm Milling spindle torque 150 Nm Spindle drive 25/27 kW Total drive approx. 50 kW - 400 V - 50 Hz Weight approx. 16 t Accessories / Special equipment: • HEIDENHAIN CNC path control Type iTNC 530 with all essential subroutines, large monitor, and hand-held control unit • Tool magazine with 10 positions for tools max. 80x300x12 kg • Internal coolant supply and minimum quantity lubrication (likely also cooling air) Separate rotary and swivel table for mounting on the main table with its own tabletop approx. 400 mm x 400 mm, as 4th and 5th axis, Type DEPOTABLE RENISHAW laser measuring system for tool measurement or verification Touch probe by m&h for workpiece measurement with infrared transmitter • Separate control cabinet, spindle cooling, hydraulic unit, chip conveyor approx. 20 tool holders, dust extraction, full enclosure, etc. Condition: good – very good, extremely robust machine with high feed forces, high positioning accuracy, and stationary workpiece. Demonstrable under power and inspected by service technician Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. A wide range of milling machines and machining centers of all types and sizes available from stock at any time!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Dimensions and Travel Distances Tool Holder: SK 40 Table Size: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance, spindle lower edge (min.): mm 140 Distance, table upper edge (max.): mm 740 Drilling radius (min.): mm 540 Drilling radius (max.): mm 1590 U-axis travel: mm 2600 Y-axis travel: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling capacity, solid material St 60: mm 40 Drilling capacity, solid material GG 22: mm 50 Tapping capacity St 60: M 36 Tapping capacity GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled: kW 5.5 at 100% duty cycle Spindle speed range: rpm 15 - 2800 Maximum torque: Nm 250 Constant torque range: rpm 15 – 200 Feed Drives X-axis - AC servo motor: kW 0.25 Y-axis - AC servo motor: kW 0.25 Z-axis - AC servo motor: kW 4.50 W-axis - AC servo motor: kW 2.50 U-axis - AC servo motor: kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Infinitely variable feed rates: mm/min. 5 - 2000 Feed force: N 12000 Accuracy Positioning accuracy X, Y-axis over 1200 mm: mm ±0.075 Repeatability X, Y-axis: mm ±0.03 Positioning accuracy Z-axis: mm ±0.05 Repeatability Z-axis: mm ±0.03 Positioning accuracy W-axis: mm ±0.05 Repeatability W-axis: mm ±0.03 Electrical Data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), extendable Display: TFT flat panel, backlit, excellent readability from all angles Position indications: Cartesian or polar, dimensions absolute or incremental Unit of measurement: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool recommendations by machining operation, cutting data recommendations by material Tool management: max. 500 tools Subroutine technique: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible per cycle Chip breaking/chip removal: Possible in drilling cycle Drilling patterns: row, circle, matrix Basic software: Dialog programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry points Zero-point determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of castings and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Data interfaces: USB port Paintwork (new paint) Standard paint, two-component textured finish Machine upper section: light grey RAL 7035 Machine base: signal blue RAL 5005 Documentation Operating and programming manual Rodpev If T Tefx Altjcd Electronic wiring diagram Spare parts drawings Test protocol for mechanics, electronics, and safety device

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, COLETT - Gamesa – radialna vrtalna naprava »PORTABEL«, ki se premika s pomočjo žerjava - iztegnjeni iztok približno 1200 mm - univerzalna vrtalna glava - hitrosti vretena 95–750 vrt/min - samodejni pomiki - konus Morse MK 4 - iztegnjeni iztok, nastavljiv po višini, približno 1400 mm - nadzorna omarica / nadgradnja Redpfjzpfy Sox Altjcd Dimenzije: D x Š x V 2 x 1 x 2,1 meter / teža 1600 kg Pridržujemo si pravico do sprememb zaradi napak / tipkarskih napak.

Stanje: rabljeno, Leto izdelave: 1994, Maks. prehodna višina: 160 mm Dolžina brusnega traku 1. agregata: 1900 mm Maks. delovna širina: 1350 mm Število trakov: 2 trakova 1. agregat: kalibrirni valj, utorjen, gumijasta izvedba 1. agregat: utorjeno jeklo Širina brusnega traku 1. agregata: 1350 mm 2. agregat: kombinirani brusni agregat Izvedba 2. agregata: valj/čevelj Upravljanje: ročna upravljalna plošča El./pnevm. oscilacija traku: pnevmatska Vstopna višina: fiksna (zgornji del se pomika) Rcjdpfx Alsy Naq Ustjd Dvig mize: elektromotorski Prikaz mize: mehanski številčni prikaz Delovna višina oziroma višina podajalne mize: 900 mm Skladišče: Nattheim

Stanje: rabljeno, Henninger high-speed milling spindle SK40 Rodpfx Aovygxnjltjcd Model 801 M391 For Deckel milling machines Gear ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Operating temperature: approx. 60°C Suitable for tools over: ø 12 mm Including 14 collets Clamping range: 2 - 15 mm

Stanje: rabljeno, Henninger high-speed milling spindle SK 40 Type 801 H580 Transmission ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. +60°C for tools over: ø 12 mm Rodpfxevygzij Altecd without collets

Leto izdelave: 1999, stanje: rabljeno, Prikaz kota: digitalen Prikaz mere za prečnik klap: digitalen Rcjdpfxoy A Hike Altsd

Stanje: novo, Leto izdelave: 2025, Suction nozzle diameter: 1 x 200 mm, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Rcodpfxohpmawj Altjd Weight: 178 kg

Stanje: rabljeno, Leto izdelave: 1988, Dalmastroj BRB-3 konvencionalni hitrosti radialni vrtalni stroj Stanje: rabljeno Leto izdelave: 1988 Tehnični podatki Vrtalna zmogljivost v jeklu: Ø 30 mm Zaklop: 430 - 1000 mm Premer stebra: 200 mm Redpfozhualex Altscd Višina obdelovanca: 500 mm Vpenjanje vretena: MK 4 Območje vrtljajev: 100 do 1120 1/min (8) Zasuk glave: 360° Moč motorja: 1,4 / 1,8 kW Priključek: 400 V Teža stroja: pribl. 2100 kg z dodatno opremo Oprema: - Podstavek za hladilno tekočino s črpalko - Naprava za rezanje navojev - Nastavitev globine vrtanja - Vrtalna glava

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 300 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2022LW160, Visokobrzinska linija za valjanje i profiliranje. Opremljena alatima za proizvodnju GELAN i SCHUCO metalnih profila koji se koriste u izradi PVC okvira za prozore. Brzina stroja do 55 m/min pri proizvodnji profila duljine 6 m. Maksimalna debljina obrađivanog materijala iznosi 2,5 mm. Promjer gornje i donje osovine 60 mm, razmak između postolja 360 mm, individualni mjenjač za svaku stanicu pokretan s dva kardana. Svaka stanica ima pogon na gornju i donju osovinu. 15 radnih stanica + dvije ravnajuće stanice (turske glave). Svi valjci alata imaju površinsku tvrdoću od 62 HRC. Svi pomoćni valjci i osovine koji dolaze u kontakt s materijalom su induktivno kaljeni na 58-62 HRC (valjci izlaznog stola i horizontalnog akumulatora). Sustav za izrezivanje u hodu (fly-cutting) sa servo pozicioniranjem (DELTA servo motor 7,5 kW + kuglični vijak + linearne vodilice). Duljina proizvoda se podešava putem HMI-a. Hidraulički sustav za rezanje. Izlazni stol s automatskim sustavom za izbacivanje, transport i razdvajanje profila (kontinuirana proizvodnja bez zaustavljanja). Horizontalni ulazni akumulator za lim omogućuje kontinuiranu, neprekinutu proizvodnju, opremljen pritisnim valjcima. Individualni pogoni. Dvostrani hidraulički odmotač. Opremljen kontinuiranim pisačem za označavanje (KONING, Njemačka). Automatski sustav slaganja nije montiran (vidi slike). Stroj ima cirkulirajući sustav hlađenja i podmazivanja na svih 15 stanica. Elektroničke komponente: SIEMENS (PLC, kontaktori), SCHNEIDER (kontaktori) i DELTA (tajvanski pogoni i servo). Glavni elektromotori: SIEMENS Ležajevi: SKF Strojna konstrukcija je naprezanjem razlučena i glodana. Stroj je korišten u probnoj proizvodnji i obradio je samo 250.000 m materijala (stroj je praktički nov). Uređaj je instaliran i priključen na struju. Moguće je testirati rad stroja na lokaciji. Cijena je za stroj demontiran i utovaren na kamion. Uključena je kompletna detaljna dokumentacija za podešavanje alata za svaki profil (crteži za montažu valjaka). Model: LW160 Rcedpfx Aloyw Rzaotod Napon napajanja: 380 V Instalirana snaga: 73,5 kW (tijekom proizvodnje trake debljine 2 mm stroj troši samo 40% snage) Frekvencija: 50 Hz Težina: 16.500 kg Struja: 160 A Serijski broj: 2022LW160 Godina proizvodnje: 2022 Godina montaže na lokaciji: 2023

Stanje: rabljeno, Leto izdelave: 2007, Filtriranje s pomočjo stiskalnice za brikete Stiskalnica, moč 4 kW Rjdozm Uw Ispfx Altjcd Briketi, dimenzije 120/45 mm 400 V

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 13.000 h, Funkcionalnost: popolnoma funkcionalen, Bruderer BSTA 500-110B je visoko hitrostna izsekovalna stiskalnica, izdelana v Švici, s stiskalno silo 500 kN. Opremljena je z dvoservo pogonom BSV 75T za precizno dvo-tirno podajanje trakov in dosega do 750 hodov na minuto. Upravljanje poteka preko B2 zaslona na dotik. Nazivna sila: 500 kN (50 ton) Leto izdelave: 2008 Število hodov: 100–750 hodov/min (spremenljivo) Nastavljiv hod: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Nastavitev višine bata: 64 mm Miza stiskalnice: 1080 x 650 mm Krmiljenje: B2, zaslon na dotik z IPC tehnologijo, s programirljivim pomnilnikom za hitro preureditev BSV 75T DVOJNI SERVO POGON Tip: tandem dvojni servo pogonski enoti, neodvisno krmiljeni poti Maks. širina traku: 70 mm na pot Maks. debelina materiala: 2 mm Dolžina podajanja: spremenljiva, prosto programabilna Kot podajanja: spremenljiv Pilotni sprožitveni kot: spremenljiv Brez pritrdilnih/lepilnih listov – trak se med izsekovanjem drži z gnani podajalnimi valji Namenjena je za paralelno podajanje dveh trakov ali dovajanje predprofiliranih/predizsekanih trakov. Rodpfx Alozh Nnwstecd

Stanje: rabljeno, Leto izdelave: 1990, obratovalne ure: 83.000 h, Funkcionalnost: popolnoma funkcionalen, BRUDERER BSTA 50HL (500 kN, letnik 1990, št. kom. 9443) Tehnični podatki Proizvajalec stiskalnice: BRUDERER AG, Frasnacht, Švica Model stroja: BSTA 50 HL Serijska/komisijska številka: kom. 9443 Letnik: 1990 Obratovalne ure: 82.600,0 h (prikazano na krmiljenju stiskalnice) Skupna masa pribl.: 8.700 kg Zvočno izolirana kabina: Š 3.460 × D 2.331 × V 3.910 mm Območje hoda (nastavljivo): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Območje nastavitve batnice: 64 mm Največja širina odprtine za orodje: 950 mm Nosilna plošča – širina × globina: 940 × 650 mm Odprtina osnovne plošče Š × G: 900 × 200 mm Višina dovedbe traku (nastavljiva): 60 – 140 mm Maks. širina dovoda traku: 250 mm Dovajalna naprava: BBV 195 - 85 Rodpfx Aey S E U Reltjcd Kot dovoda: 90 stopinj Maks. debelina traku: 4 mm, širina traku: 160 mm Dovajalna dolžina: 0 – 85 mm Napajalna napetost: 3 × 400 V / 50 Hz Moč glavnega motorja: 28 kW Krmilna napetost (DC): 24 V DC Pnevmatsko napajanje: 6 – 10 bar (priključek R ½") Širina stiskalnice (z dovajanjem): pribl. 2.471 mm Globina stiskalnice: pribl. 1.302 mm Višina stiskalnice: pribl. 3.165 mm Originalna tehnična dokumentacija in električne sheme

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 450 mm, pomik osi Y: 270 mm, pomik po osi Z: 310 mm, hitro pomikanje X-os: 75 m/min, hitri pomik os Y: 75 m/min, hitri pomik na osi Z: 75 m/min, nazivna (navidezna) moč: 17 kVA, skupna višina: 2.300 mm, skupna dolžina: 1.500 mm, skupna širina: 2.600 mm, skupna masa: 3.400 kg, največja hitrost vretena: 30.000 obr/min, nos vretena: HSK40, število mest v zalogovniku orodij: 40, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, CNC obdelovalni center CHIRON FZ 08K S Magnum High Speed Plus (HSP) TEHNIČNE LASTNOSTI: Leto izdelave: 2007 CNC krmiljenje: FANUC 18i-MB5 Število osi: 7 Pomik v osi X: 450 [mm] Pomik v osi Y: 270 [mm] Pomik v osi Z: 310 [mm] Hitrost pomika v oseh X, Y in Z: 75.000 [mm/min] Največji premer palice v vretenu za struženje: 32 [mm] Obseg vrtenja osi A: 360 [°] Natančnost pozicioniranja osi A: 0,001 [°] Obseg nagiba osi B: -20° / +115 [°] Natančnost pozicioniranja osi B: 0,001 [°] Tip vretena: HSK40 Največje število vrtljajev vretena: 30.000 [min⁻¹] Število mest v izmenjevalcu orodij: 40 Potrebna priključna moč: 17 [kVA] Napajalna napetost: 400 [V] Dimenzije (DxŠxV): 1500 x 2600 x 2300 [mm] Teža: 3.400 [kg] VKLJUČENA OPREMA: x1 sonda za orodja RENISHAW, tip TS27R x1 enota za hlajenje vretena x1 rezervoar za hladilno tekočino x1 naprava za obdelavo 6. strani x1 vpenjalni primež SCHUNK x84 vpenjalnih tulec – tip HSK40 x14 vpenjal – tip F35 x1 klimatska naprava za elektro omaro x1 naprava za izsesavanje oljne megle DONALDSON – tip Torit DCE Rsdsyq Nyyjpfx Altecd x1 pištola za izpiranje x1 tribarvna signalna svetilka x1 navodila za uporabo stroja x1 navodila za upravljavca x1 programski priročnik Stroj je mogoče videti pod napetostjo v naših prostorih po predhodnem dogovoru. Cena na zahtevo, nakladanje na tovornjak vključeno. Možnost pošiljanja po celem svetu. Podatki na tej strani so zbrani po naših najboljših močeh, zato ne jamčimo za njihovo popolno točnost. Stroji podobni Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas in Alzmetall, kot tudi CNC rezkalni, vrtalni, navojni in brusilni stroji.

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 100-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit is also equipped with a fixed-mounted water separator, which removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety cut-off system is included. This system starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. The pressure blasting unit is delivered fully assembled, operational, and space-saving in a mesh box. Only the compressed air supply needs to be connected and the unit filled with blasting media. Transport can be carried out conveniently using a forklift or pallet truck. For protective clothing, spare parts, etc., a lockable aluminum storage box is installed. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 100 L" Rodpfxewc Ri Io Altocd - 1" pressure regulator, permanently installed - 1" water separator, permanently installed - SAPI safety cut-off system - Blasting media sieve - Cover - 10 m blasting hose ø 25x7 mm, fully assembled - Silicon carbide venturi long nozzle, available in 6 mm, 8 mm, or 10 mm diameter - RED 2 sandblasting helmet - Sandblasting overall (nylon/cotton) - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - SAF breathing air / activated carbon filter - Wear parts kit consisting of: - 100 tear-off visors for RED 2 - 10 inner lenses for RED 2 - 1 blasting hose coupling 25x7 mm nylon - 2 rubber seals for blasting hose coupling - 1 nozzle holder 25x7 mm - Mesh box with blasting hose holder - Lockable aluminum box Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Rigid 1" piping (internal and external) - Rubber-coated metal cone with rubber seal - Large handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 100 l - Total height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight: approx. 75 kg Mesh box dimensions: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight incl. all accessories: 260 kg

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff - Fastest switching times while complying with trade association regulations (VBG 48) - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on Rcodpjwc Rk Eofx Altod - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: novo, Our SAPI pressure blasting unit, type 'Mammut', with a 60-litre vessel capacity, is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the integrated pressure regulator. A water separator is also permanently installed on the blasting unit; this removes moisture from the compressed air and prevents the blast media from clumping due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This initiates and stops the blasting process by actuating the hand lever mounted on the blast hose. The scope of delivery includes: - SAPI pressure blasting unit 'Mammut 60 L' Rcjdpfowc Afhsx Altod - 1" pressure regulator, permanently mounted - 1" water separator, permanently mounted - SAPI safety shut-off Technical data - Pressure Blasting Unit: - Precisely adjustable from 0.1 to 12 bar - TÜV certified with certificate - Fixed piping 1" internal and external - Rubber-coated metal nozzle with rubber seal - Large maintenance opening - Chassis with rubber wheels - Media dosing valve (suitable for all common blasting media) - Tank capacity 60 l - Total height 1,130 mm - Tank diameter 360 mm - Overall diameter 700 mm - Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off: - Fastest on/off times, fully compliant with occupational safety guidelines (VBG 48) - The pressure setting can be precisely adjusted prior to operation: continuously adjustable from 0.1 to 12.0 bar - Reduced abrasive consumption as the pressure vessel remains under pressure, preventing unnecessary discharge of media - Upon restarting, full blast pressure is immediately available at the nozzle, eliminating build-up time—thus, significant reduction in both media consumption and wear on the blast hose - No moisture (condensate) forms inside the vessel, as it remains pressurised at all times and is not vented with each start/stop. Additional benefits include: - Optimum media dosing via hardened precision valve - Lower compressed air requirement, significantly reducing fuel (diesel) consumption - One-person operation, as vessel pressure is constantly indicated and can be adjusted via the pressure gauge without needing to start the device first - No sensitive components such as control valves, membranes or gaskets—resulting in low maintenance and reliable operation. Only the blast hose within the safety shut-off needs to be checked and replaced if necessary.