Ott Stroj Za Robne Trakove nakup rabljenega (102.094)

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 2650 x 640 x 1400 mm Weight: 700 kg Total connected load: 5 kW Edge Banding Machine KANTOMAX BASIC - Min./max. edge thickness: 0.4 - 3 mm - Min./max. edge height: 15 - 55 mm - Min./max. workpiece height: 10 - 50 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min. - Operator panel at machine infeed at eye level - Chain feed system - Support plate for PVC and ABS edging - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for effective glue joint compression - Centrally adjustable top pressure - Teflon-coated glue pot for hot melt adhesive granules - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece separation Ibjdpfx Aevz E T Hequec - End trimming unit for front and rear edge overhang, high-precision linear guides; motors: 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius trimming unit top and bottom with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom and side, for rounding pre-milled PVC edges - Buffing unit for edge finishing top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, height adjustable - Total power consumption: 5.0 kW / 400 V - Extraction connection Ø 100 mm - Extendable workpiece support - Noise protection enclosure with viewing window - Compressed air connection 6 bar - Dimensions: L=2650, W=640, H=1400 mm - Weight: 700 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 860 x 1060 x 1060 mm Weight: 280 kg Total Power Requirement: 3 kW Edgebander CONTOUR 350 DELUXE - Motor power: 0.4 kW - Heating power: 2.2 kW - Feed speed continuously adjustable: 0–14 m/min - Voltage: 400 V / 50 Hz - Minimum workpiece thickness: 10 mm - Maximum workpiece thickness: 40 mm - Edge thickness: 0.3–3 mm - Edge width: 15–50 mm - Compressed air connection: 6 bar - Minimum inside curve radius: 20 mm - For gluing curved edges - Glue application on straight and curved edges - Glue applied on both the workpiece and edging - Automatic length cut-off - Glue temperature continuously adjustable electronically - Installation dimensions: 1600 x 1150 x 965 mm - Transport dimensions: L=860 mm, W=1060 mm, H=1060 mm Ijdpevz En Rofx Aqusbc - Net weight: 280 kg - Gross weight: 340 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 1480 x 760 x 1160 mm Weight 180 kg Ijdpfx Aqovz Hppeusbc Total power requirement 3.5 kW Edge sanding machine KOS-2600 ECO - Table size: 750 x 300 mm - Sanding belt dimensions: 2600 x 150 mm - Sanding belt backing: 850 x 200 mm - Belt speed: 20 m/sec - Table stroke up to 200 mm - Oscillation motor power: 0.25 kW - Main motor power: 3.0 kW - Extraction connection: 100 mm - Separate oscillation drive with geared motor - Height-adjustable cast iron table, double column-guided - Dual extraction mechanism for main sanding unit and round sanding table - Sanding unit steplessly tiltable up to 45° - Graphite-coated sliding surface - Including mitre fence with angle scale - Including extendable table extension with multi-roller system - Including sanding belt - Dimensions: L=1480, W=760, H=1160 mm - Net weight: 180 kg - Gross weight: 230 kg

Stanje: novo, Leto izdelave: 2025, Edge banding machine F5 with PLC control (incl. 15'' touchscreen), application of hot-melt adhesive to the workpiece for edge material up to 3 mm: jointing cutter (incl. DIA tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change pot preparation incl. glue discharge device, HF milling station with pneumatic cutter adjustment, incl. corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift-off device), cleaning station Whispercut joint head combined milling head radius milling unit R=2mm corner radius milling unit R=2mm quick-change system for corner milling unit radius change motor R=1mm multi-radius scraper R1/R2 chassis release agent spray device (PUR) cleaning agent spray device (PUR) pneumatic 3-point adjustment LED lighting INCLUDES 2nd interchangeable glue pot max. edge thickness 3mm workpiece thickness 8-50mm Ibodpfsh Hl Ayox Aqusc min. workpiece length approx. 160mm feed speed 10m/min Ready for operation in approx. 3.5 min dimensions approx. 4300x1300x1400mm (LxWxH) weight approx. 900kg extraction nozzle 1 x 140mm

Stanje: rabljeno, Leto izdelave: 2010, Stroj za obdelavo robov, ki so že predhodno lepljeni. Ibodpfx Aqoz Dp Hvjujc

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 3810 x 575 x 1520 mm Weight: 1000 kg Total Power Requirement: 8 kW Edge Banding Machine KANTOMAX BASIC FÜ+EK - Minimum / Maximum Edge Thickness: 0.4 - 2 mm - Minimum / Maximum Edge Height: 15 - 48 mm - Minimum / Maximum Workpiece Height: 10 - 45 mm - Minimum Workpiece Width: 80 mm - Minimum Workpiece Length: 120 mm - Feed Motor: 1.1 kW - Feed Speed: 8, 12, 16 m/min Ijdpfxsvz E Sco Aquobc - Control Panel at machine infeed at eye level - Chain feed system - Support plate for PVC and ABS edge banding material - Pressure zone with pneumatically driven primary pressure roller and follow-up rollers to ensure compression of the glue joint - Centrally adjustable top pressure - Glue pot Teflon-coated for hot-melt adhesive granulate - Glue application to the workpiece via glue roller - Electronic temperature control, operating temperature 180 - 200°C - Pneumatic end trimming station - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA jointing cutter heads for trimming before edge gluing station, vertical spindle adjustment, electro-pneumatic horizontal control, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (one clockwise, one counter-clockwise) - End trimming unit for front and rear edge overhang, high-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pulling trim cut for high accuracy - Flush and radius trimming unit top and bottom with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Corner rounding unit top and bottom for rounding PVC edges, motor 0.37 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side for rounding pre-milled PVC edges - Buffing unit for finishing top and bottom edges, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, inclinable and height-adjustable - Total power consumption: 8.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Sound insulation cabin with inspection window - Compressed air connection: 6 bar - Machine dimensions: L=4000, W=1000, H=1420 mm - Transport dimensions: L=3810, W=575, H=1520 mm - Weight: 1000 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 3200 x 780 x 1500 mm Weight 800 kg Total power requirement 8 kW Edge banding machine KANTOMAX BASIC FÜ - Min./max. edge thickness: 0.4 - 3 mm - Min./max. edge height: 15 - 48 mm - Min./max. workpiece height: 10 - 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Operator control panel at machine infeed at eye level - Chain feed system - Support table for PVC and ABS edge bands - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for bonding seam compression - Centrally adjustable top pressure - Teflon-coated glue pot for hot-melt adhesive granulate - Glue application to workpiece by glue roller - Electronic temperature control, operating temperature 180 - 200°C - Pneumatic end trimming unit Ibsdpfsvz E Evjx Aquec - Pneumatic cylinder for workpiece separation - Joint trimming unit with 2 DIA jointing cutter heads for preparing before the glue section, vertical spindle adjustment, electro-pneumatic horizontal adjustment, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (1 clockwise, 1 counterclockwise) - End trimming unit for front and rear edge overhang; high-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius trimming unit (top and bottom) with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit: tracing from top, bottom, and side to round pre-trimmed PVC edges - Buffing unit for finishing edge surfaces (top and bottom), 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, angle and height adjustable - Total power consumption: 8.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Noise protection enclosure with viewing window - Compressed air connection 6 bar - Dimensions: L=3200, W=780, H=1500 mm - Weight: 800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, I am selling an SCM K130 edge banding machine, year of manufacture 2009. Ibedpfx Aqst Ir Tpousc Configuration: - Edge banding with EVA glue - End trimming saws, pneumatically adjustable 0-15° - Tiltable radius cutters, pneumatically retractable - Free space available for additional units Very good condition, fully operational. Includes CE marking and complete documentation.

Stanje: pripravljen za uporabo (rabljen), V zelo dobrem stanju. Ibedpfx Asvunm Aoquoc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Single-sided automatic edge banding machine with pre-milling unit, hot-melt glue application to straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor HF end trimming station, HF multifunction milling unit, 2-motor corner copying unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece feed, integrated section control for contact-free operation of processing functions, and L-Motion control (18 axes). For ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/5.0 mm and workpiece height from 10 – 60 mm. • Automatic edge feeding for roll material via rotatable roll table D=800 mm • Infeed table (650 mm) with support • Automatic strip magazine (70 mm capacity) with spiked roller for wood laths. • Two counter-rotating, demand-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the pot), fine dosing glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is unused for extended periods but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color changes. • Pre-cutting shear for roll material up to 3 mm edge thickness. Ibodpfx Aqjf Tdwcjuec • Pressure zone consisting of a driven pressure roller running synchronously with the glue roller and two smaller, conversely conical pressure rollers with pneumatic pressure, ensures optimal joint formation of the edge material with the workpiece. Program-controlled adjustment for edge thickness with L-Motion motor. • High-frequency cross-cut saw equipped with two 0.55 kW HF motors, 12,000 rpm, 2 saw blades, and high-precision linear guides ensure a clean and precise cut, equipped with extraction hoods. Pneumatically swivels from the control panel. • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with multifunction tools (straight + 3 different radii), horizontal and vertical tracing of the workpiece, each with 3 L-Motion motors for positioning the horizontal tracing shoes, vertical tracing shoes, and the multifunction tool. 2 chip extraction hoods, height adjustment for the top unit with the top pressure. • Corner copying unit: Automatic processing of end edges up to 3 mm edge thickness. Equipped with 2 high-frequency motors 0.27 kW, can be activated from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. Each with 2 L-Motion motors for positioning the horizontal tracing shoes and the tool. • Rotatable control panel with 10'' color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is not in use, switching units on and off and error diagnostics, motorized top pressure, extensive program memory, and fully automatic operation of the processing units.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Preformed edge banding machine with direct glue application to the edge material for thin and thick edges from 0.4 to 3 mm. • Leak-proof gluepot with bottom glue reservoir and fast heat-up time after machine downtime. Automatic start of the application roller after approx. 8-10 min. • Pressure roller driven by gear motor, infinitely variable via potentiometer from 0-15 m/min. • Automatic edge feed and automatic end trimming for straight and shaped workpieces via foot switch. • Pneumatic roller separation unit max. 3 x 30 mm Ibedpfxod Sb Dto Aqujc • Film plate D = 600 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, številka stroja/vozila: CA.03.013.12, obratovalne ure: 1.555 h, Edge banding machine FELDER G400 from trade-in – used condition as received from the customer. Machine has been functionally tested – see video. Glue scraper (optional) is installed. Isdpfeng H Uvjx Aquobc

Stanje: novo, Leto izdelave: 2025, STROJ ZA NAMEŠČANJE GLAVNE IN KONČNE VEZALNE TRAKOVE Ibedpfeh S Uv Ejx Aqujc MAGRAF KV-10 PLUS

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Semi-automatic edge banding machine for molded parts, suitable for edge heights up to 140 mm, feed speed adjustable from 2.5 to 12 m/min, quick-change device for glue pot, glue pot and glue roller with Teflon coating, standby function, tiltable worktable up to 45°, and digital length cutting unit. Includes the following options: Ijdpjd Sb Duofx Aqusbc • Electropneumatic premelting unit for cylindrical 2 kg cartridges • Patented top pressure feed • Extension beam with steel balls

Stanje: novo, Leto izdelave: 2026, Edge thickness: 0.4 – 3 mm Thickness of glued panels: 12 – 45 mm Minimum length of glued boards: 80 mm Minimum width of glued panels: 60 mm Mechanical feed speed: 8 / 11 / 13 m/min Glue temperature: 185 – 210 ℃ Tank capacity: 2.5 – 3 kg Primary milling head speed: 12,000 rpm Rounding radius: R = 2 mm Working air pressure: 6 – 8 bar Pre-milling unit: 1.8 kW x 2 Glue application roller unit: 0.75 kW Glue heating device: 1.5 kW Corner rounding unit: 0.37 x 2 kW Main milling unit: 0.75 kW x 2 Conveyor belt unit: 1.5 kW Overall dimensions: 3,850 x 700 x 1,300 mm Weight: 1,000 kg Pre-milling: Diamond cutter Gluing Cutting Milling: two motors Radial scraper Flat scraper (self-adhesive) Spraying system Polishing Internal lighting Automatic lubrication Isdpfxov Dt Spe Aquobc

Stanje: novo, Leto izdelave: 2026, Hebrock F 5 Če želite maksimalno učinkovitost, je Hebrock F 5 rešitev za obdelavo robov v zahtevnem obrtnem podjetju. F 5 zagotavlja obdelavo robov v vseh korakih, saj je opremljen z vsemi komponentami, ki jih potrebujete za vaše zahteve: strojna freza za utore, krožna žaga, frezalna glava, večradijna strgalna rezila, kotna freza, ploščata strgalna rezila, postaja za čiščenje. Za še večjo prilagodljivost na poti do popolnega zaključka je mogoče F 5 dodatno opremiti s praktičnimi večradijskimi strgalnimi rezili. maks. debelina roba: 3 mm maks. debelina obdelovanca: 50 mm Pripravljen za uporabo v 3,5 min Oprema: Hebrock F5 Next - 10 m/min Stroj za obdelavo robov F5 Next S krmiljenjem PLC (vključno s zaslonom na dotik) in s sistemom za nanašanje taljenega lepila na obdelovanec za robne materiale do 3 mm; strojna freza za utore (vključno z diamantnim orodjem) do 2 mm globine reza, brez vzdrževanja rezervoar za lepilo s pripravljenim sistemom za menjavo rezervoarja, vključno z napravo za izlivanje lepila, visokofrekvenčna krožna žaga (približno 12000 vrt/min), visokofrekvenčna frezalna postaja (približno 12000 vrt/min) z ločeno pnevmatsko nastavitvijo freze in frezo z menjalnimi ploščami (kombinirana izvedba), kotna freza, večradijsko strgalno rezilo, ploščato strgalno rezilo (vključno s pnevmatskim sistemom za dvig), postaja za čiščenje, robusten verižni pogon, dvojni valjčni zgornji pritisk z krogličnimi ležaji, okno za pregled na hrbtni strani stroja, izvlečni podstavek za obdelovanec, napredovanje približno 10 m/min. Hebrock F5 F5/08/4 Priprava za hitro menjavo kotne freze Ibjdpfx Aolht Hwjqujc F5/08/5 dodatni menjalni motor za kotno frezo z orodjem F5/09/4 Večradijsko strgalno rezilo (R1/R2) F5/10 Podvozje F5/14 Dodatni menjalni rezervoar F5/24/1 Razpršilna naprava za ločilno sredstvo F5/24/2 Razpršilna naprava za čistilno sredstvo F5/25 Razpršilna naprava za obdelavo roba F5/27 Držalo za frezo in večradijsko strgalno rezilo F6/28 Razpršilno nanašanje za teksturno obdelavo F5/30 Pnevmatska 3-točkovna nastavitev (freza za robove, faze in izravnavanje) F5/31 Spajanje do 50 mm F5/32 LED osvelitev Lokacija: Na zalogi, 54634 Bitburg - na voljo takoj -

Stanje: dober (rabljeno), Leto izdelave: 2002, I am selling a HEBROCK AKV 088D edge banding machine for shaped parts. Year of manufacture: 2002. Suitable for curved components. Good condition, inspection possible! It is also possible to additionally purchase the HFF08 radius milling unit. Ibsdjvx D Auopfx Aquec

Stanje: rabljeno, Leto izdelave: 2010, Gebrauchtý stroj Rok výroby: 2010 s jednotkou pro srovnávání a zaoblování rohů Ovládací panel s LCD displejem a klávesnicí Srovnávací jednotka se 2 protiběžnými diamantovými frézami s přívodem hrany pro páskový a proužkový materiál s lepicím válcem a lepicí jednotkou s předem zastřihováním z role s přítlačnou sekcí s kapovací jednotkou s tažným kapem s jednotkou na zarovnání a frézování rádiusů Jednotka na zaoblování rohů pro čelní hrany manuální nastavení jednotek Ibsdpfx Aqow I H Rkjusc Tloušťka hrany: 0,4–5 mm Výška obrobku: 8–60 mm Minimální šířka obrobku: 70 mm Minimální délka obrobku: 140 mm Rychlost posuvu: 11 m/min s rádiusovým stíracím agregátem s plošným stíračem s leštící jednotkou výsuvná podpěra obrobku Odsávací přípojka: 120 + 2 x 80 mm Hmotnost: cca 990 kg D x Š x V: 4550 x 1550 x 1100 mm Dostupnost: krátkodobě Sklad: Flörsheim

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Control: Edge Control with 18.5" touchscreen color display (16:9), swiveling control panel, program memory, motorized pressure beam adjustment, feed via transport chain, feed speed 8-18 m/min, extendable workpiece support, motorized adjustable infeed fence gluing unit 1961, diamond jointing cutters for both climb and conventional milling, automatic adjustment to workpiece height Edge feeder 1903 Pre-cutting up to 3 x 45 mm (material-dependent) Adhesive application system 1905 Multi-System automatic glue height adjustment with sensing nozzle, pressure regulator for cartridge press-on pressure control, use of PUR adhesives possible, Pressure section 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable, Multifunctional unit 1824 MOT 4 Ibsdpfx Aqsv Sv Enoujc with multifunction cutter for radii 1,2,3 mm Corner rounding unit 1832 corner rounding function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers with pneumatic adjustment (separate for top and bottom) Chip collection box for radius scraper, Surface scraper 1964 for cleaning off glue residue for a clean glue joint with extraction hoods Spray system 1856 for infeed and outfeed zones Buffing unit 1940 for re-polishing and edge finishing ----- Technical Data ----- Edge thickness for coil material: 3 mm, Edge thickness for strip material: 8 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner rounding: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Workpiece support clearance: 470 mm, Support plate diameter for edge material: 800 mm, End trimming blade for coil material up to: 3 mm, Heating-up time: 3.5 min, Jointing cutter power: 2 x 2 kW, End trimming saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner rounding power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraping unit: 70 mm, Overall length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours comes from a 2022 snapshot Availability: short term Location: Röllbach

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4200 x 1500 x 1500 mm Weight: 1050 kg Total Power Requirement: 8 kW Edgebander KANTOMAX BASIC FÜ+EK DELUXE - Min./max. edge thickness: 0.4 – 2 mm - Min./max. edge height: 15 – 55 mm - Min./max. workpiece height: 15 – 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel (touch screen) at machine infeed, eye-level - Chain feed - Magazine plate for PVC and ABS edging rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue line consolidation - Centrally adjustable top pressure - Glue pot, Teflon-coated, for hot-melt granulate, capacity 3 kg - Glue application to workpiece via glue roller - Electronic temperature control, operating temperature 180 – 200°C - Pneumatic guillotine for cutting edging material - Pneumatic cylinder for workpiece spacing - Jointing cutter aggregate with 2 carbide-tipped jointing cutter heads for premilling in front of glue station, vertical spindle adjustment, electro-pneumatic horizontal control, 2 motors at 1.4 kW each, 200 Hz, 9000 rpm (1 clockwise, 1 counterclockwise) - Heating lamp for pre-warming the panel - Pre-cutting from roll - 3 solid steel pressure rollers - Flush and radius trimming unit top and bottom with vertical and horizontal sensing, 2 motors at 0.5 kW each, 200 Hz, 12,000 rpm - Contour trimming unit (corner rounding) top and bottom, for flush trimming and corner rounding of PVC edging, 0.55 kW motor, 200 Hz, 12,000 rpm - Radius scraper unit with top, bottom, and side sensing for rounding pre-trimmed PVC edges - Buffing unit for edge finishing, top and bottom, 2 motors at 0.18 kW each, 50 Hz, 1400 rpm, inclinable and height adjustable - Spray nozzle system (cleaning fluid) - Total power consumption: 8.0 kW / 400 V - Extraction ports: 4 x Ø 100 mm - Extendable workpiece support - Acoustic enclosure with inspection window - Compressed air connection: 6 bar - Machine dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm Ibjdpfx Ajvz E Tmequoc - Weight: 1050 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C12302A210I-D, skupna dolžina: 4.550 mm, skupna višina: 2.500 mm, moč servomotorja: 35.000 W, skupna masa: 6.000 kg, višina izdelka (maks.): 2.500 mm, vhodna napetost: 380 V, Prodamo industrijski avtomatski stroj za razrez papirja (Paper cutting machine) YYS-I-1750, letnik 2023. Stroj je v odličnem stanju, izjemno zmogljiv (51 kW) in primeren za visoko produktivno obdelavo papirnih rol. Priložen je tudi popolnoma nov rezervni nož. Isdpfezik Dpjx Aquebc Stroj se nahaja v Sloveniji (Celje). Kupec sam organizira demontažo in prevoz. Za resnega kupca ob ogledu stroja možnost dogovora o končni ceni. Na voljo imamo tudi preostalo opremo za proizvodnjo kartonaže (dvobarni tiskarski stroj, zlagalno-lepilna linija).

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SM2021609, vrsta vhodnega toka: trifazni, skupna širina: 1.900 mm, skupna dolžina: 3.800 mm, vhodna napetost: 380 V, moč servomotorja: 4.000 W, skupna masa: 2.150 kg, Polavtomatski stroj za lepljenje škatel SOOME SMZX-2800 (Aktiviran 2023) / Semi-automatic folder gluer machine SOOME SMZX-2800 (Activated 2023) Prodamo izjemno ohranjeno in minimalno rabljeno linijo – polavtomatski stroj za lepljenje kartonskih škatel proizvajalca HEBEI SOOME. Stroj je bil proizveden leta 2021, montiran konec leta 2022 in uradno aktiviran v proizvodnji šele leta 2023. Zaradi zaprtja obrata je stroj sedaj na voljo za prodajo. Stroj je masivne izdelave (preko 2 toni), izjemno zanesljiv in omogoča hitro lepljenje velikih formatov valovitega kartona (do neverjetnih 2800 mm širine). Glavne tehnične specifikacije: Proizvajalec: HEBEI Soome Packaging machinery co., ltd. Tip stroja: SOOME SMZX-2800 Letnik proizvodnje: 2021 (Aktivacija: 2023) Maksimalna širina kartona: 2.800 mm x 1.500 mm Hitrost delovanja: 0 - 75 m/min Napajanje in moč: 3×380 V/AC, instalirana moč 4.0 kW Dimenzije stroja: 3.800 x 1.900 x 1.700 mm Teža stroja: 2.150 kg Ibedozil Tlepfx Aqusc Stroj se nahaja v Sloveniji (Celje). Električna instalacija je bila prenovljena leta 2023, naprava je priklopljena in pripravljena na pregled. Kupec sam organizira demontažo in transport. Na voljo imamo tudi tiskarski stroj za karton (Flexo Printer EMproject 89, stroj za razrez papirja (Slitter Rewinder) YYS-I, letnik 2023).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Prodajam popolnoma opremljen stroj za obdelavo robov BRANDT Optimat KDF 650 C, leto izdelave 2010: Konfiguracija: Vhodni oporni element, nastavljiv ročno Rezalniki za fuge, nastavljivi ročno Lepilo za robove: EVA Območje pritiska materiala, nastavljivo s pomočjo servomotorja Krožne žage, nastavljive s pomočjo pnevmatičnega sistema Ijdeu E E D Djpfx Aquobc Rezalniki za obdelavo robov (zgornji in spodnji), nastavljivi s pomočjo servomotorja Okrogla glava z 2 motorji, nastavljiva ročno Nož za obdelavo robov (R2), nastavljiv s pomočjo pnevmatičnega sistema Površinski nož Polirni krtače Upravljalna plošča Power Control PC20 Višina delovne površine, nastavljiva s pomočjo servomotorja Višina materiala: 8 – 60 mm Debelina materiala za robove: 0,4 – 12,0 mm Hitrost podajanja: 11/14 m/min. Celotna dolžina, vključno s podajno ploščo: 5860 mm Celotna teža: 2600 kg Priložena je vsa dokumentacija in certifikat CE. Odlično stanje, popolnoma delujoče!

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed Isdpfxslht Hzj Aquebc F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: novo, Leto izdelave: 2026, Edge thickness: 0.4 - 3 mm Thickness of glued panels: 10 - 45 mm Minimum length of glued boards: 80 mm Minimum width of glued panels: 60 mm Mechanical feed speed: 8 / 11 / 13 m/min Adhesive temperature: 185 - 210 ℃ Tank capacity: 2.5 - 3 kg Primary milling spindle speed: 12,000 rpm Rounding radius: R = 2 mm Working pressure (compressed air): 6 - 8 bar Pre-milling unit: 1.8 kW x 2 Glue application roller unit: 0.75 kW Glue heating device: 1.5 kW Grooving (notching) unit: 0.37 x 2 kW Main milling unit: 0.75 kW x 2 Corner rounding unit: 0.75 kW Conveyor belt unit: 1.5 kW Overall dimensions: 4,500 x 700 x 1,450 mm Transport dimensions: 4,280 x 650 x 1,280 mm Ibedpov Dt T Hefx Aqujc Weight: 1,230 kg Pre-milling: Diamond cutters Gluing Final trimming Milling: two motors Corner processing Radius scraper Flat scraper (self-adhesive) Spray system Polishing Interior lighting Automatic lubrication Electrical components: Delta brand