Stroj za robne trakove

WINTER KANTOMAX BASIC FÜ+EK

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4200 x 1500 x 1500 mm Weight: 1050 kg Total Power Requirement: 8 kW Edgebander KANTOMAX BASIC FÜ+EK DELUXE - Min./max. edge thickness: 0.4 – 2 mm - Min./max. edge height: 15 – 55 mm - Min./max. workpiece height: 15 – 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel (touch screen) at machine infeed, eye-level - Chain feed - Magazine plate for PVC and ABS edging rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue line consolidation - Centrally adjustable top pressure - Glue pot, Teflon-coated, for hot-melt granulate, capacity 3 kg - Glue application to workpiece via glue roller - Electronic temperature control, operating temperature 180 – 200°C - Pneumatic guillotine for cutting edging material - Pneumatic cylinder for workpiece spacing - Jointing cutter aggregate with 2 carbide-tipped jointing cutter heads for premilling in front of glue station, vertical spindle adjustment, electro-pneumatic horizontal control, 2 motors at 1.4 kW each, 200 Hz, 9000 rpm (1 clockwise, 1 counterclockwise) Gijdpovz E Tmjfx Afqjl - Heating lamp for pre-warming the panel - Pre-cutting from roll - 3 solid steel pressure rollers - Flush and radius trimming unit top and bottom with vertical and horizontal sensing, 2 motors at 0.5 kW each, 200 Hz, 12,000 rpm - Contour trimming unit (corner rounding) top and bottom, for flush trimming and corner rounding of PVC edging, 0.55 kW motor, 200 Hz, 12,000 rpm - Radius scraper unit with top, bottom, and side sensing for rounding pre-trimmed PVC edges - Buffing unit for edge finishing, top and bottom, 2 motors at 0.18 kW each, 50 Hz, 1400 rpm, inclinable and height adjustable - Spray nozzle system (cleaning fluid) - Total power consumption: 8.0 kW / 400 V - Extraction ports: 4 x Ø 100 mm - Extendable workpiece support - Acoustic enclosure with inspection window - Compressed air connection: 6 bar - Machine dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm - Weight: 1050 kg

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Gisdpoxqggcefx Afqol SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel Godpfx Aegf Sw Nefqjil - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm

Stanje: rabljeno, Leto izdelave: 2001, Širina udarne stene: 4000 mm Višina udarne stene: 1000 mm Zunanje dimenzije: 4600 x 1500 mm 2 x 1,5 kW motorja Skupni nazivni volumenski pretok: 7000 m³/h Odsesovalni priključki levo in desno s premerom 300 mm Lokacija skladišča: Garbsen Giedpfjvvizkex Afqsl

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment Gedpfewka S Isx Afqeil - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2016, Rabljeni stroj Leto izdelave: 2016 Stanje: Trenutno še v proizvodnji Oprema in tehnični podatki: Leplilni bazen Pritiskalna cona Krožna žaga Kombinirana rezkar r=2 mm, poravnavajoči rezkar Debelina obdelovanca 8 - 50 mm Minimalna širina obdelovanca ca. 75 mm Minimalna dolžina obdelovanca ca. 120 mm Debelina robu 0,4 - 3,0/5,0 mm Gijdpfsw Rtadex Afqsl Višina roba maks. = višina obdelovanca + 4 mm (2+2) Električni priključek 400V, 50 Hz , 3-fazni Skupna priključna moč 3,2 kW Hitrost pomika 8,0 m/min. Priključek za pnevmatiko 6 bar Neto teža 550 kg Stroj je možno dograditi z: Radijusno vlečno rezilo Ploščato vlečno rezilo Polirni agregat Lokacija: NRW Razpoložljivost: cca december 2025

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Brand KDF110 Optimat Ambition – only 1,150 operating hours Make: Brandt Model: KDF 110 Year of manufacture: 2012 Serial No.: 0-261-20-6960 Control: Easy Control 10+ non-contact distance control, feed-regulated with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Godpfx Afsxvirfjqeil Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / workpiece guide: Central control, 2 roller tracks Jointing unit: 2 x 0.75 kW 200 Hz, including joint cutter set in DIA version, manual positioning via Siko counting dial, max. 3 mm stock removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing unit for hotmelt adhesive and PU application option, magazine, pressure zone with electro-pneumatic 2-point positioning via central control Pressure zone: 1st roller powered, 2 free-running rollers for excellent and consistent compaction End trimming unit: 0.18 kW, 12,000 rpm Milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotation, 3-position setting for chamfer/radius (R2), overhang and straight edges. Max. 3 mm edge thickness with Siko counting dial Profile scraper: max. 3 mm edge thickness Surface scraper: Reversible knife Chain width: 80 mm Edge material (roll): 0.4 – 3 mm End trimmer device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: for workpiece thickness 8–22 mm: 70 mm; for 23–40 mm: 120 mm (dependent on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed rate: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Location: ex stock 54634 Bitburg – immediately available –

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.200 mm, dolžina pomika po osi Y: 1.600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Pripravljen za 1 glavno vreteno s lepilno skupino, nameščeno desno na portalni prečnik. Glavno 5-osno vreteno, 12 kW Vrtalna glava s 31 vreteni: 21 vertikalnih in 10 horizontalnih Vrtalni list za utore, nagib 90° Pihalna šoba za borbo 60 mm Krožni magacinski sistem za 32 orodij, HSKF63 Linearni magacinski sistem za 8 pozicij Krožni magacinski sistem za 10 pozicij Lepilna skupina Power Edge Pro Duo Varnostni nadzor z odbijačem Odrezovalni trak za ostružke Giedpfx Afox Irzcsqsl Vakuumska črpalka Upravljalna programska oprema PowerTouch, WoodWop

Stanje: dober (rabljeno), Leto izdelave: 2006, • Glue pot • Conversion/retrofit was carried out by Hüttenhölscher GmbH in Verl Giodpfxsibdyqj Afqsl • Area of application: adhesive application unit for handle strips • Vacuum table: included • Automatic pressure zone: included

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Stroj za lepljenje robov - predrezkalna enota - lepilna enota Giodpfxjx Rcw Ho Afqjl - žagalna enota - rezkalna enota - strgalna enota - enota za strganje lepila