Stroj za robne trakove

Optimat Logica 7

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H2X393F01980, Leto izdelave: 2015, obratovalne ure: 14.760 h, nosilnost: 3.500 kg, dvižna višina: 3.550 mm, prosto dvigovanje: 150 mm, težišče tovora: 500 mm, vrsta goriva: dizel, gradbena višina: 2.514 mm, moč: 44 kW (59,82 KM), dolžina vilic: 2.300 mm, Tip prednje pnevmatike: polne pnevmatike (črne), velikost sprednje pnevmatike: 27x10-12, tip zadnje pnevmatike: polne pnevmatike (črne), velikost zadnje pnevmatike: 23x9-10, lastna masa: 4.850 kg, barva: rdeča, Oprema: CE označba, kabina, nastavljiva roka, osvetlitev, Linde forklift truck with long, plastic-coated forks CONFIGURATION: LINDE diesel forklift, Type H35 D (3B) Load capacity: 3,500 kg at load center: 500 mm Series: 393-02 PEDALS: Double pedal system Maximum driving comfort and optimal productivity through Linde double-pedal control DRIVE AXLE TIRES: Super-elastic 27x10-12 STEERING AXLE TIRES: Super-elastic 23x9-10 STANDARD MAST 188: Lift height: 3,550 mm Overall height: 2,514 mm Free lift: 150 mm CARRIAGE: 1,150 mm / 6 rollers / up to 3.5 t OPERATOR PROTECTION ROOF: Standard full cab / Overall height: 2,210 mm Full cab for complete weather protection, including: Roof window with wiper, front and rear windshields with wipers, Metal doors with side windows OPERATOR SEAT: Comfort, air-suspended seat with fabric cover Swivel version OPERATOR STATION EQUIPMENT: Warm water heating Radio / Bluetooth® / USB / SD Panoramic interior mirror Exterior mirrors left & right Clipboard with LED lighting OPERATION: Central lever control LLC AUXILIARY HYDRAULIC CONTROL: Joystick (cross lever) operation AUXILIARY HYDRAULICS: Dual auxiliary hydraulics on vehicle side Dual auxiliary hydraulics on mast side (standard) LIGHTING: Work lights, mounting positions 3 and 4, LED Two forward-facing lights, top left and right Work lights, mounting positions 7 and 8, LED Two rear-facing lights, top left and right Switchable via roof console with 3-position switch (On/Off/Reverse) ENVIRONMENT: Dust protection, elevated position Rsdpfx Aleyr I Nietecd VEHICLE TECHNOLOGY: Tilt angle preselection PAINT: RAL 2002 Red ATTACHMENT: Durwen fork positioner RZV 35 GS With separate side shift +/- 100 mm With bolted-on, plastic-coated forks 2300 x 140 x 50 mm, Body width: 1150 mm Opening range (fork arm to fork arm): 490 - 1230 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a rotary magazine table with a diameter of 750 mm for edge material from 0.4–3 mm, a GlueBox application unit, as well as top and bottom polishing units. The machine is equipped with an advanced x-motion Plus control system featuring a 15" SmartTouch display and a multifunctional milling unit for precise processing of plastic edges. Contact us for more information on this machine. Additional equipment • Application unit with Teflon coating for 1.5 kg EVA granulate • Top and bottom polishing unit Machine advantages Technical machine benefits • Height adjustment for positioning of workpieces: 8–60 mm • Rotary magazine diameter: 750 mm for edge material 0.4–3 mm in rolls • Rotary magazine for edge material with ball bearings, plate diameter: 740 mm • GlueBox application unit • Milling unit with two motors: 0.35 kW (1 HP), 12,000 rpm, HW saw blades, Z 24, D-100x20x3.2 mm, pneumatically tiltable 0°–10° • Top and bottom multifunctional milling units // top and bottom profile sanding machine x-motion plus, for processing plastic edges of 2 and 3 mm • Motorized corner rounding unit with 2 motors, electronic adjustment for milling the front and rear edge profiles of the top/bottom edge for edge thickness of 0.4–3 mm and feed speeds up to 10 m/min • Pre-milling unit with assigned diamond-tipped cutters, speed 12,000 rpm, 2x 1.5 kW • Edge and workpiece thickness measurement with Bluetooth technology Additional information Power supply: 3x400V 50/60Hz Chain feed with 2 speeds, feed rates: 10 and 18 m/min Rcsdpfxox D Hbte Alted Control system: x-motion Plus control with 15" SmartTouch

Stanje: rabljeno, številka stroja/vozila: 008186, Maks. širina panela: 3200 mm Maks. dolžina panela: 3200 mm Maks. izstop glavnega žaginega lista: 110 mm Število vpenjalnih čeljusti: 11 Redpexaudzefx Altocd

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Rjdeuc Idxjpfx Altecd Cutting system for thin panels

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za vstavljanje moznika z upravljalno pištolo za sočasno nanašanje lepila in vstavljanje moznika Rcjdoqu N U Dspfx Alted Standardni mozniki premera 8 mm Dolžina moznika: 25–80 mm Nazivna zmogljivost: 1 moznik na sekundo (vključno z nanašanjem lepila) Uporablja lepila PVA (vodna disperzija), viskoznost 200–400 mPa 1 kos REZERVOAR ZA LEPILO, kapaciteta 8 kg 1 kos REZERVOAR ZA VODO, kapaciteta 8 kg Maksimalni tlak: 5 bar

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, moč: 5 kW (6,80 KM), največja višina reza: 200 mm, največja širina rezanja: 1.300 mm, premer žaginega lista: 550 mm, dolžina rezanja (maks.): 3.200 mm, širina reza pri vzporednem vodilu: 1.300 mm, dolžina pomične mize: 3.200 mm, Exhibition machine F 45 Elmo Drive - Tilting capability + / - 45° - Cutting height 200 mm - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm travel - Mitre cross-cut fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Workpiece holder Rjdpfx Alouh R R Estscd - On/off switch on the double roller carriage - Front support roller

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.450 mm, skupna višina: 1.790 mm, skupna dolžina: 3.470 mm, Oy Foudila Ab je podjetje v Kaskinenu, Finska, z več kot 45-letnimi izkušnjami na področju opreme za rokovanje z lesom. Zadnjih 15 let smo dejavni tudi v paletni industriji, kjer smo razvili številne stroje za žebljanje, avtomatsko podajanje lesa in zlaganje. Proizvajamo tako standardne stroje kot tudi prilagojene rešitve glede na potrebe kupcev. Stroj za žebljanje paletnih desk Foudila DNM-153 je kompakten, prilagodljiv in učinkovit stroj za izdelavo desk za paletno industrijo, ki omogoča odlično razmerje med ceno in zmogljivostjo. Zaradi velike hitrosti proizvodnje, uporabniku prijazne zasnove ter velikih zalogovnikov za deske je primeren tako za standardne kot tudi posebne izdelke, v malih ali velikih serijah, pri čemer je potreben le en operater. Stroj lahko po eni izmeni izdela več kot 1000 desk. Stroj je opremljen s tremi žebljičarji z zalogovniki za velike kolute žebljev. Vsak vzorec zabijanja lahko vsebuje 1–3 žeblje, po potrebi pa je možno tudi preklopiti na upognjenje žebljev. Deske se nalagajo v zalogovnike z velikim zalogom – tri kasete za vzdolžne/spodnje deske in ena kaseta za zgornje/pokrovne deske. Upravljanje in programiranje poteka preko sodobnega, uporabniku prijaznega programskega vmesnika na 10'' zaslonu na dotik s krmilnim sistemom Beckhoff. Zaradi kompaktne zasnove stroj zavzame zelo malo prostora v proizvodnji, montaža pa je hitra in enostavna, saj se stroj lahko dobavi popolnoma sestavljen. Rcjdpfxeyl Tr Nj Altsd Stroj je mogoče dodatno opremiti s transporterjem za gotove izdelke, avtomatskim zlagalnikom ali avtomatskim podajalnikom desk. Te opcije je mogoče vgraditi tudi naknadno, kar omogoča postopno investiranje. Za dodatne informacije, tehnične specifikacije ali ponudbo nas kontaktirajte.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Point-to-point CNC drilling machine MASTERWOOD SPEEDY 207 used machine for custom furniture production, kitchen furniture, bathroom furniture, and various applications Drilling unit with 5 independent vertical spindles and 1 double horizontal spindle Saw for longitudinal cuts Machine table with a drilling capacity of 1390 x 750 mm and two lateral pop-up stops, electronically controlled, allowing the machining of panels up to 2800 x 750 mm in size with a single program and intermediate stop Capability for drilling panels up to 2800 mm Pneumatic tool shift: 60 mm Max. panel thickness: 50 mm Spindle speed: 4,500 rpm Saw rotation speed: 6,000 rpm Vacuum pump motor: 1.5 HP Suction cup diameter: 80 mm Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Rcsdpfx Aswd Irvsltsd Multitasking control system complete with interactive graphic programming, 9" video display, drilling programs, work cycle optimization, as well as graphic, parametric, and diagnostic modes Overall dimensions – Machine: 2500 x 1800 x 1800 mm (H), weight: 850 kg Overall dimensions – Control panel: 800 x 520 x 1200 mm, weight: 120 kg

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead Rcjdoqlckpspfx Alted The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022,