Stroj za robne trakove

Optimat Logica 6

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, SCM Olimpic K 560 Automatski stroj za kantiranje, godina 2018 na prodaju! Kompletacija: - Lančani transport s brzinom 12/18 m/min - Debljina trake za kantiranje: 0,4–3 mm - EVA ljepilo - Jedinica za glodanje ploča "RT-V" - Jedinica za nanošenje ljepila „VC-S4.1“ - Jedinica za rezanje ruba "K-SEL" - Jedinica za glodanje ruba "R-K" - Jedinica za zaobljenje kutova "ROUND X" - Jedinica za struganje ruba RAS-K - Jedinica za poliranje SP-V Tehničke karakteristike: - Brzina transportera (dvije brzine) m/min: 12 - 18 - Minimalna/maksimalna debljina obratka mm: 8 - 60 - Debljina lijepljenog drvenog ruba mm: 0.4 - 6 (8 mm kod HP kompozicije) - Debljina lijepljenog rubnog traka mm: 0.4 - 3 - Maksimalna površina lijepljene trake mm²: 135 - Promjer nosača kalema („tanjur“) mm: 780 - Maksimalno preklapanje lijepljenog ruba u odnosu na obradak mm: 2+2 - Minimalni razmak između transportiranih komada mm: 600 - Minimalna duljina obratka (pri minimalnoj širini od 100 mm) mm: 140 - Minimalna duljina trake mm: 180 - Minimalna duljina drvenog ruba mm: 220 - Minimalna širina obratka (pri minimalnoj duljini od 210 mm) mm: 95 (60 mm opc.) - Širina produžetka stola mm: 560 - Visina radne površine od poda mm: 900 Jedinica za glodanje ploča „RT-V“: - Maks. površina skidanja odvarka mm²: 55 - Maks. debljina glodanja mm: 3 Hnodpow Sw Tkjfx Adksi - Minimalna/maksimalna debljina obratka mm: 8–45 (60 mm opc.) - Snaga motora kW: 2 x 1,5 - Promjer glodala mm: 100 - Visina glodala mm: 49 (64 mm opc.) - Brzina rotacije alata o/min: 9.000

Stanje: rabljeno, številka stroja/vozila: 007517, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, hot air Jointing unit: yes Multifunction unit: yes Hjdpswuz E Rofx Adkeni Top milling unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 9 pcs

Stanje: dober (rabljeno), BRANDT highflex 1440 Edge Banding Machine Well-equipped, available for inspection prior to purchase. - Pre-milling cutters Hnsdpfx Ast Hxxpodkei - Glue application unit - Pneumatic pre-cutting guillotine - Pressure rollers - Trim saws for precise end cutting - Top and bottom milling unit (pre-milling) - 2x multifunctional finishing milling units - Profile scraper - Flat scraper - Polishing unit The machine is equipped with NC cutter control and a pneumatic package. - Max workpiece height: 60 mm - Max edge band thickness (roll): 3 mm - Max feed speed: 14 m/min The machine is well-maintained and in very good condition.

Stanje: rabljeno, Leto izdelave: 2011, Rabljeni stroj Leto izdelave: 2011 Stanje: stroj popolnoma obnovljen in servisiran Oprema in tehnični podatki: Brezstopenjska hitrost podajanja 10–18 m/min Krmiljenje Edge Control 19 z 18,5" barvnim zaslonom na dotik Agregat za dodajoče rezkanje Hnsdpfxewka N Tj Adksi Podajanje robnih trakov Postaja za nanašanje lepila, kartuša, tipalna šoba z avtomatsko nastavitvijo višine lepila Tiskalna enota Agregat za krajšanje Večnamenski rezkalni agregat Kopirni rezkalni agregat Agregat za obla robove Ravna rezkalna rezila Polirna enota Debelina obdelovanca 6 - 60 mm Debelina robnega traku 0,4 - 8 mm Minimalna širina obdelovanca 60 mm Najkrajša dolžina obdelovanca 180 mm Dimenzije: 5300x1500x1600 mm Teža: 2200 kg Lokacija: 65439 Flörsheim Razpoložljivost: na kratki rok

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Obdelovalni stroj za lepljenje robov Felder FORMAT 4 Tempora60.06LX je bil izdelan leta 2019. Opremljen je s krmilnim sistemom x-motion PLUS, verižnim podajalnikom s hitrostjo 10 m/min in lepilno enoto s teflonskim premazom za granulata EVA ali PUR. Stroj podpira debeline robnih trakov od 0,4 do 3 mm in vključuje večnamensko rezkalno enoto. Razmislite o možnosti nakupa tega stroja za lepljenje robov Felder FORMAT 4 Tempora60.06LX. Za več informacij o tej napravi nas kontaktirajte. Hjdpfsx D D R Ssx Adkoni Vrste aplikacij Lepljenje robov

Stanje: rabljeno, Edge thickness: from 0.4 to 5.0 mm Workpiece thickness: from 10 to 50 mm Total length: 4000 mm Feed speed: 11 m/min Bimatic Edge Bander Model: Prima 7.5 Two ----- Manufacturer's Description: Technical Data: Edge thickness: 0.4 – 5 mm Min. panel width (without corner rounding unit): 80 mm Min. panel width (with corner rounding unit): 130 mm Min. panel length (without corner rounding unit): 100 mm Min. panel length (with corner rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 11 m/min Extraction spigots: 3 x 150 mm Connection: 9 kW – 400 V / Compressed air: 6 bar Units: Hjdpowgwl Dsfx Adkeni Jointing milling unit incl. AIGNER diamond jointing cutter heads, with Konstantin DIA quick-change knife system and controlled edge air blast nozzle after the 2nd jointing cutter head. Cut-off saw unit with extraction device incl. 2 pneumatically swivelling saw blades, adjustable and programmable from the control panel. MULTI-radius milling unit with 4 position motors, adjustable and programmable from the control panel. Includes DIAMOND cutters with 1 mm and 2 mm radii. Corner rounding unit (copy milling unit) with nesting function and pneumatic 2-position revolver, adjustable and programmable from the control panel. The complete unit can be pneumatically engaged/disengaged from the control panel. Includes 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm. MULTI-radius scraper unit, radius 1 mm and 2 mm, with pneumatic 4-position revolver. The unit can also be pneumatically engaged/disengaged. Incl. extraction device with chip collection box for scraper shavings. Flat scraper unit with four-sided scraper blades, reusable on 4 edges. The complete unit is pneumatically engageable/disengageable. Removed glue residues are extracted. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth/sisal/lambswool wheels for cleaning and polishing. General Features: - 90° infeed guide - Telescopic outfeed with double support - Motorised infeed fence (jointing thickness setting), adjustable and programmable from the control panel - Motorised upper pressure beam, adjustable and programmable from the control panel - Motorised pressure zone, adjustable and programmable from the control panel - 5 mm version: quick-change motors with reversible flush cutters, interchangeable for milling motors with radius cutters - High-gloss package: roller sensing for radius milling unit, radius scraper unit, and flat scraper unit - Large visual, noise and safety enclosure for all units and the glue pot - Interior lighting - Control panel with 15” touchscreen and intuitive operator guidance - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece gap monitoring - Teflon-coated glue pot with quick-change system and energy-saving standby mode - Glue roller with feed auger for long and high workpieces (specially for PUR adhesive) - Additional quick-change glue pot - Pressure zone with 3 pressure rollers, with the first roller driven by a motor - Heavy-duty roller shear for edging 54 x 3 mm - Original RIEPE spraying system - In front of the jointing milling unit: LPZ II separator - In front of the saw unit: cooling and anti-static LP 289/99 - Mo...

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: 272 / 9-604, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5.000 h, največja višina reza: 2.200 mm, skupna širina: 5.700 mm, dolžina rezanja (maks.): 4.300 mm, glavni premer žaginega lista: 300 mm, Stroj je rabljen in v dobrem splošnem stanju. Popolnoma je delujoč. Uporabljal se je le občasno po potrebi (ne vsakodnevno) na področju oglaševalske tehnike. Dolžina reza 4300 mm, višina reza 2200 mm, moč motorja 5,5 kW, z napravo za predrezovanje Super Cut, žagin list 300 mm. POMEMBNO: Žaga je pripravljena za predstavitev. Tehnik, ki je žago namestil, lahko po potrebi proti plačilu pomaga pri njeni demontaži. Hnedpfxow I Er Tj Adksi

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Μηχανή περιθωριοκόλλησης Hebrock K36 με σύστημα ελέγχου PLC, δοχείο κόλλας ταχείας θέρμανσης με ειδική αντικολλητική επίστρωση, χωρίς ανάγκη συντήρησης, με προκαταρκτική ρύθμιση για γρήγορη αλλαγή δοχείου κόλλας. - Οθόνη αφής 10" - Μέγιστο πάχος ταινίας 3 mm - Ελάχιστο μήκος τεμαχίου 200 mm Hjdpfowyu E Uex Adkoni - Ελάχιστο πλάτος τεμαχίου 80 mm - Ταχύτητα τροφοδοσίας 10 m/λεπτό - Έτοιμη για λειτουργία σε περίπου 5 λεπτά - Μέγιστη κατανάλωση ισχύος 14 kW - Ηλεκτρική σύνδεση 400V/3ph/50Hz - Διαστάσεις μηχανήματος 5250x1230x1430 mm - Βάρος περίπου 1700 kg Εξτρά • Προκεφαλή προρριστικής κατεργασίας Whispercut, ύψος τεμαχίου 60 mm • Θερμαινόμενος οδηγός εισαγωγής • Ακτίνα για στρογγυλεμένα γωνίες R = 2 mm • Σύστημα ταχείας αλλαγής για μοτέρ στρογγυλέματος γωνιών • Ξύστρα πολλαπλών ακτίνων R2/R1 • Στρογγύλεμα γωνιών σε ύψος τεμαχίου 60 mm • Μονάδα ψεκασμού αποκολλητικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Προστατευτικός ψεκασμός άκρων • Δυνατότητα επεξεργασίας για nesting • Πνευματική ρύθμιση 3 σημείων • Πολυεργαλείο (R2/R1/λοξότμηση) • Εσωτερικός LED φωτισμός • Εξοπλισμός για μικρά τεμάχια • Προεγκατάσταση για σύστημα επιστροφής (barbaric) • Πακέτο αξόνων / Μοτέρ ρυθμίσεων ύψους, ταινίας και προρριστικής κατεργασίας • Πρόσθετα στηρίγματα εισόδου/εξόδου τεμαχίων (450 mm το καθένα)

Stanje: novo, Leto izdelave: 2026, Efficient and precise CNC milling router CORMAK C2030 (working area 2100 x 3100 mm) BSP, standard equipped with SERVO drives, features a steel and cast iron frame, providing high rigidity and resistance to overload during operation. Designed for processing and cutting wood materials, chipboard, MDF, OSB, plywood, as well as plastics like PVC, plexiglass, and dibond. Training at our headquarters is included in the price with every machine purchase! Construction - Rigid welded steel frame - Gantry arms made from thick, hardened, powder-coated steel plates for increased stiffness, ensuring high-quality finished parts Work Table - Hybrid technology work table - T-slots for manual material clamping (working dimensions: 2010 x 3010 mm) Drive System - SERVO motors used for high-power machine tool drives, providing optimal acceleration and speed in all axes - X and Y axes feature high-quality rack-and-pinion gears, praised by users for their durability and precision - All axes move on linear rail guides - Tool height sensor included - Linear bearing system: trapezoidal rails with Hiwin carriages Spindle - High-grade spindle renowned for durability - Air-cooled system - High-quality machine bearings for exceptionally quiet operation and extended service life - Tool height measurement sensor included Hedoiz A Rqjpfx Adkoni - Spindle speed range: 4500–18000 rpm - Tool holder: 3 pcs. ER32 collets (diameters: 1/8", 1/2", 5–6 mm) Software - Compatible with ARTCAM PRO software - Optional: UCANCAM V11 CAD/CAM CNC software (supports import from Corel, AutoCAD, etc.; import/export, text editor, and many advanced features) - Software enables fast, easy design and exports to G-code; compatible with files from other programs DSP Control - Digital Signal Processing (DSP) technology - DSP controller with built-in processor and memory for reliable, user-friendly operation - Guarantees smooth, precise machine movement Technical Specifications Spindle: 5.5 kW / 18,000 rpm, inverter-driven, air-cooled Working area: 2100 x 3100 mm (up to 2680 x 3600 mm) Max spindle clearance: 350 mm Control: DSP Software resolution: 0.001 mm Software: ARTCAM PRO (optional: UCANCAM V11 CAD/CAM CNC) Power supply: 400V Weight: 1350 kg Machine dimensions: 2680 x 3600 x 2200 mm Table height: 715 mm Guides: linear rails Drive transmission: rack-and-pinion Axis drives: hybrid servo motors Optional Equipment - Gantry height increase (Z-axis) to 450 mm - UCANCAM V11 software (supports import from Corel, AutoCAD; import/export, text editing) - Tool kit: mills, drills, holders For more information, please contact us.

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, skupna dolžina: 7.920 mm, trajanje garancije: 3 meseci, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changes and tool adjustments via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system, approx. 2 to 3 minutes, depending on glue type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR glue and cleaning the system is quick and easy, taking only a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective film, such as high gloss and super matt finishes! One absolute highlight of the machine is the multifunction package, which proves especially beneficial for operations processing a variety of edge types. The DIA tools have a multi-stage design and can switch between radii and chamfers depending on requirements—from the longitudinal trimming unit and corner copying to profile scraping. The extendable workpiece support and extended infeed area provide additional support when handling large panels. A guidance system assists with feeding small workpieces into the machine. Hnjdpfx Adjx Emf Dskei Edge thickness – coil material: 0.4 – 3 mm (material-dependent) Edge thickness – strip material: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min. Glue application with GlueJet using EVA and PUR glue types, with minimal effort. Compatible with all standard edge materials, including high gloss and super matt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue quantity management Ready for integration with RETURN systems Motorized pressure bridge with top belt drive Multifunction units for fast setup – radius, flush, chamfer operations Spraying units, vertical & horizontal and much more. Delivery, installation, and machine training can be offered by us for an additional fee. The machine is currently located in our distribution warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our general terms and conditions (GTC) can be found on our homepage at holzher.de/de/agb.