Mütek Systemtechnik Hawk-Eye nakup rabljenega (3.393)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced blade projection, suitable for hard and soft materials + 22 kW motor + Effective square cutters/blades *For pallets: up to a maximum of 10 pallets per hour *Depending on screen and material. Considerably higher throughput with smaller residual wood. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: colour of the machine may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown when rotor is idling - 70-90 rpm for high throughput performance - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-dampening machine feet Fgodpfx Abex Af Rdstec - CE compliant The following options are available at an extra charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Enlarged hopper extension 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral impurities. Damage to the tools and/or increased wear may result.

Stanje: novo, Leto izdelave: 2026, Consisting of bale breaker for large bales type MHB and straw shredder type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (approx. 15 weeks production time) Suitable for round or square bales. Includes frequency converter (FU) – this controls the speed of the scraper floor. The bales are placed on the scraper floor and the feed of the milling unit is activated. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the combination of the bale breaker and straw shredder is recommended here. Technical data of the bale breaker: Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill and the kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw. Max. size of square bales: 2400 x 1200 x 800 mm (L x W x H) Milling unit motor: 5.5 kW, 380 Volt Scraper floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for the even larger straw shredder (18.5 kW): +€2,750 net Technical data, MHZ with special hopper: 15 kW 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Screen with interchangeable inserts, optional perforations: (10, 12, 15), 22, 30, 45 mm With star-delta switch, overload protection, and 8 m connection cable ready to plug in Discharge nozzle: 160 mm Blowing distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras at a surcharge: Feed screw: +€970 net Cyclone (suspension to be installed by customer) *Should be installed no more than 10 m away +€2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve (makes the material pressureless): +€5,750 net Control system: from €1,620 net Special extension for the bale breaker 3 m (other sizes on request) +€9,750 net Briquetting press MPP 180 S; lightly used demonstration unit 70 mm briquettes – up to a maximum of 100 kg/h from €39,700 net * Larger machines available on request --- Description: The muetek bale breaker was developed for breaking up round and square bales of hay and straw. The attached shredder attached to the bale breaker shreds straw from all cereal varieties, hay, maize, and miscanthus. The muetek machines of the MHZ/MHB series stand out due to their robust design and heavy-duty construction. muetek MHB series bale breakers are equipped with a chain conveyor on which the straw bale is placed using a front loader. The platform is adjustable depending on the bale type. The chain conveyor pushes the bale against the milling rotor, and the feed speed is adjustable. The milling rotor is equipped with multiple teeth that tear apart the straw bale. The straw separated from the bale is expelled. --- Basically, the machines are suitable for dry feedstocks: – Straw – Hay --- Fgedpfeb Nulhox Abtec Processing hemp is only possible with a special bale breaker Surcharge approx. €9,720 net * depending on version. Shredding hemp is not possible with the straw mill. Requirements for the feed material: Moisture content max. 12%

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Throughput is highly dependent on screen and input material: - Up to 60 kg/h with EPS using a 15 mm screen *The coarser the screen, the higher the throughput. Motor: 9.2 / 11 kW, 400 Volt Fedpfx Aoh S H T Ujbtegc Robust steel construction Hardened cutting blades Screen with interchangeable inserts, optionally available in (8), (10), 15, 22, 26, 30, 40, or 60 mm perforations With electric drive: star-delta switch, overload protection, and 8 m power cable – plug-ready Blow-out nozzle 150 mm, optional for plastic or grain pipes Blowing range approx. 12 m Chassis with 2 running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm), all wheels with solid rubber tires Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare parts and options: 24 hardened blades, each €9.90 (net) 6 bolts, each €14.90 (net) 1 screen €475 (net) Cover €290 (net)

Stanje: dober (rabljeno), Used, good condition. Technically inspected second-hand machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press, e.g. for wood dust, spelt husks, enrichment material (such as toys and chewing material for pigs), animal feed, alfalfa, or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (depending on material) (e.g., sawdust with a bulk density of 250 kg/m³) Accurate statements on throughput are only possible after testing with your material. Actual output may vary significantly depending on the bulk density of the starting material. Customs tariff number: 84793010 Briquette Ø 65 mm Including 2 m press channel Main motor power: 37 kW Feed screw geared motor: 2.2 kW Compression screw: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for operating status and load display for main drive and feed screws PLC control with hour counter in the switch cabinet Machine has CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3800 kg Optional extras at additional cost: Temperature control unit for press tools To maintain temperature for optimum briquette quality. Includes temperature controller for pump, cooling unit, fan, pressure switch. Pre-wired, ready to connect – mandatory for operation Including corresponding control system + €7,850 net Guillotine or tablet breaker For cutting briquettes + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. Conveyor line/cooling section (nominal: 4x2m) Each 2 meters €990 net Installation/commissioning (estimated 2-3 days onsite) Billed based on effort and separate calculation. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday/night hour: 50% surcharge Each Sunday/holiday hour: 100% surcharge Daily allowance per technician: depending on country Per car/van and travel kilometer: €0.98/km Travel and accommodation charged to client according to receipts or via flat rate. Test run with customer-specific material: (by arrangement, up to a maximum of 750 kg) – €1,970 net flat rate Fodpfsfmqq Ejx Abtjgc Raw material requirements: - Moisture content (atro) must be between a minimum of 6% and maximum of 15% - Chip length maximum 18 mm - Installation temperature: heated room at minimum +5°C - Feed material must be free from metals and mineral contamination. Damage to the press tools and/or increased wear may result

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Fgsdpfed N Dnhsx Abtec Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for trade fair demonstration unit *Available upon request New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully produced and in stock; only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front sleeve: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height: 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Fgsdpsd Su Hxofx Abtec Option - press plier cooling: no Option - hydraulic oil cooling: yes Option - level monitoring: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Leto izdelave: 2024, stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg Fgedpfxjff Sbio Abtsc mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530 Included: + Profile rotor for increased throughput performance Options: Double knife row + €895 net Fjdpfxsd Db N Io Abtjgc Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume approx. 0.4 cbm, Throughput capacity: 1 – 5 hopper fillings/h, Hydraulically operated pusher, Screen perforation as required (10 – 40 mm), Suction connection Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% absolutely dry. Standard features: • Fast hydraulic system • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start-up • Automatic shutdown in case of idling rotor • Removable extraction chute • Rotation speed 70 – 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control of the hydraulic pusher • Stable guides for the hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €5,980 net - Synchronised control for conveyor and overband magnet + €2,750 net (Start and stop synchronised with the shredder) Requirements for input or raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: novo, Leto izdelave: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple cutting edges (reversible) Hydraulically operated pusher Screen perforation size as desired (10–40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor runs idle - Rotor speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform The shredder is designed for processing solid wood, chipboard, MDF panels, and other materials upon testing and approval by the manufacturer. Additional shredder options: - Height increase by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Controls for conveyor and overband magnet + €2,750 net (Start and stop synchronized with shredder) Raw material requirements: - Moisture content (atro) must be below 30% - Installation temperature: heated room, minimum +5°C Fsdpfsd Dgw Usx Abtsgc - Metals and mineral contaminants such as sand, stones, etc. increase wear

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Fgodpfjd E R D Ssx Abtsc Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Stanje: novo, Leto izdelave: 2024, Production time approx. +/- 4 months. The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system Fgsdpsd Hkqhofx Abtsc - Automatic shutdown when rotor is idling - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Requirements for raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Fgsdpfx Aed Nnwljbtsc Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Leto izdelave: 2025, stanje: novo, Granulator MVZ 7.5 kW Demonstration unit available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for the secondary size reduction of wood chips. More details can be provided after testing with your material. Our granulators are used for size reduction of a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for a variety of shredding tasks. For example, in injection molding machines, scrap parts and sprues are produced that need to be recycled. In blow molding machines, along with scrap parts, trim waste or start-up parisons must be processed. Materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes from blow molding can be processed. Material is fed from above via a hopper into the grinding chamber of the granulator. The internal rotor is equipped with knives. The material is shredded between the rotating knives and the stationary knives mounted in the grinding chamber housing until it passes, as defined regrind, through the screen located below the rotor. *Option: The ground material is usually pneumatically conveyed to big bags, silos, or other containers. The price applies only to the size reduction unit as shown in image 1 - Fan, cyclone, and filter are optional components. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger machines available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding of PE 1000 plastic Input material: approx. 40 mm chip length Secondary shredding to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ Significantly higher throughputs can be achieved when re-shredding G 30 wood chips. Up to a maximum of 400 kg/h with a 10 mm screen *metered feed, e.g., via conveyor belt or auger. Details available after a test run with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Fodped N Dn Djfx Abtogc Suction nozzle: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – other sizes available on request Price per screen: €390 Price for replacement knife set: €679 Suitable for example for: - All types of plastic waste Various materials – HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger units available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *dependent on screen and material Opening: 620 x 400 mm *optional with matching extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *dependent on screen and material Opening: 620 x 500 mm *optional with matching extraction/conveying system --- To select the right machine, the following information is required: - Length x width x height of the feed material? - Required screen size (final output size in mm)? - Required throughput per hour in kg? - Wall thickness in mm? - Material description Photos can also be helpful

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor available immediately Advantages: + special rotor with reduced knife overhang + 22 kW motor + efficient square knives *For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm Hydraulically operated pusher Screen perforation currently (15/20 mm) *can be exchanged Suction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Plant color may vary Weight: 1920 kg Standard features: - Control cabinet with PLC control - Automatic star/delta start-up - Fast hydraulics - Automatic shut-off when rotor runs idle - Rotational speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Fgodpfedv Eu Hsx Abtec The following options are available at extra cost: *See last 2 images. - Additional knife row + €2,790 - Segment floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation) - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.

Stanje: dober (rabljeno), Refurbished used machine *Options at extra cost, see below with full 1-year warranty Delivery time approx. 16 weeks after order Technical specifications: Throughput capacity up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm Including 2 m press channel Main motor power: 45 kW Feed auger with geared motor: 2 x 2.2 kW Compactor auger: 2 x 5.5 kW Distributor auger: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operating states and load display for main drive and feed augers PLC control: Siemens S7/300 with operating hours counter in the control cabinet Machine has CE mark Automatic start/stop function Dimensions: 3,100 x 860 x 1,800 mm (L x W x H) Weight: 4,500 kg Fsdpfe E Dqusx Abtjgc Options: Silo for MAP series (only suitable for a MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and fill level sensor. €19,700 net plus VAT. -Temperature control unit for press tools To maintain temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Prewired – absolutely necessary for operation Including corresponding control €7,850 net -Guillotine for cutting briquettes to length Compressed air supply required on site €6,940 net plus VAT. -Transfer pipe / cooling section (nominal: 4 x 2 m) Per 2 meters €990 net Assembly / commissioning (nominal per press approx. 2–3 days on site) Charged according to actual effort and time, invoiced separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday/night hour: 50% surcharge Each Sunday/public holiday hour: 100% surcharge Daily allowance per technician: depending on country Per car/van and distance kilometer: €0.98/km Travel and accommodation will be invoiced on an actual cost basis or as a flat rate at the buyer’s expense. Material testing with customer-provided material (by arrangement, up to max. 750 kg) – €1,970 net flat rate ---- Raw material requirements: - Moisture content (atro) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Ambient temperature: heated room with at least +5°C - Material must be free of metals and mineral contaminants. Damage to press tools and/or increased wear may otherwise occur.

Stanje: novo, Leto izdelave: 2026, Idealni stroj za drobljenje mehkega lesa. . Motor: 11/15 kW; 400 V - 50 Hz - 3 fazni, Premer rotorja: 260 mm, hidravlično vodeno potisno kolo Sito po izbiri (12 - 40 mm) Priključek za odsesavanje Ø 160 mm Teža cca 1.100 kg Mere (d x š x v) cca 1805 x 1118 x 1650 mm Barva: modra / siva Fsdpswzarcsfx Abtegc Zahteve za surovino: - Vsebnost vlage (atro) mora biti pod 30 % - Kovine in mineralne nečistoče, kot so pesek, kamni itd., povzročajo povečano obrabo. . Z veseljem vam ponudimo brezplačen preizkus z vašim materialom. Vabimo vas k nam v Neckartailfingen. Prav tako je možno, da nam material pošljete prek špedicije in mi test dokumentiramo s fotografijami in videi.

Stanje: rabljeno, Machine de broyage MGZ 1330, 37 kW Heures de fonctionnement : 275 Inclus : - 2ème rangée de couteaux - Hydraulique rapide, pour un débit accru - Préparation pour bande transporteuse En option : - Bande transporteuse avec séparateur automatique de métaux Vos avantages : + Ouverture du caisson de coupe extrêmement grande : en haut 1300x1200mm Fedpfx Abox Tfdhjtsgc + Rotor spécial adapté pour bois dur et bois tendre + Économique en énergie et puissant, avec 37 kW au démarrage Données techniques : Ouverture d’alimentation (en haut, mm) : 1.300 x 1.200 Volume de la trémie (m³) : 1,6 m³ Diamètre du rotor (mm) : 368 Vitesse du rotor (tr/min) : 65 - 125 Puissance requise (kW) : 37 Tamisage (mm) : selon accord Outils : 37/70 couteaux Diamètre de la buse d’aspiration (mm) : 200 mm Dimensions (LxLxH) : 2430x2410x1735 mm Poids (env. kg) : 3 500 --- Exigences pour la matière première : - La teneur en humidité (atro) doit être inférieure à 20 % - L’alimentation doit être exempte de métaux et d’impuretés minérales. Des dommages aux outils et/ou une usure accrue risque d’en découler.

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 50 W, vrsta hlajenja: zrak, skupna širina: 1.500 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, delovno območje: 600 mm, skupna masa: 120 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, dolžina mize: 600 mm, širina mize: 600 mm, potrebna širina: 1.550 mm, potrebna višina: 2.100 mm, valovna dolžina laserja: 1.064 nm, delovna višina: 950 mm, vhodna frekvenca: 50 Hz, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is designed for a very wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 50-watt fiber laser. For permanent markings, the use of a laser is now indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers after setting the initial value. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as side arms for marking long parts, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser 50 Watt • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm • Signal light to indicate operating status • Optional: rotary axis (3-jaw chuck) • Optional: fume extraction system (with activated carbon filter) Fgedpfxoy Urpyo Abtsc • Marking software EZCAD in German / English (additional software available on request) • Pilot laser (simple preview, plain text preview) • Focus finder (easy focus adjustment) • Max. workpiece height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / Door opening (pass-through) height approx. 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.550 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, skupna masa: 120 kg, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, pomik po osi Z: 300 mm, potrebna širina: 1.550 mm, potrebna višina: 2.050 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, vrsta laserja: vlakenski laser, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent markings, the use of a laser is indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos in just a few clicks, without advanced programming knowledge. The software can automatically increment serial and article numbers after initial setup. Furthermore, the software is capable of reading data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transferring it to predefined fields. The use of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Signal light to indicate operating status • Optional: rotary axis (3-jaw chuck) • Optional: fume extraction (including activated carbon filter) • Optional: digital height measuring system Fodpfxoxd Az Ne Abtsgc • Optional: autofocus system for automatic focus distance determination • Optional: extension arms for large components (one-sided, double-sided) • Marking software EZCAD in German / English • Pilot laser (simple preview, plain text preview) • Focus finder (easy focus adjustment) • Max. part height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Monitor and keyboard tray with adjustable height • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): approx. 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 900 mm, skupna širina: 1.550 mm, skupna višina: 1.900 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, Laser for Product Marking - The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking tasks. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics. Fgodpfx Ajunh H Sjbtsc Depending on requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. For permanent marking, the use of a laser is essential in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos in just a few clicks, without extensive programming knowledge. Serial and article numbers can be auto-incremented by the software after initial setup. In addition, the software can automatically extract variable data (such as drawing numbers, project names, etc.) from existing tables and insert it into predefined fields. Use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, a movable Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser: 30W, 20W, or 50 Watt • Laser class 1 • Wavelength: 1064nm • Marking area: 150x150mm (optionally larger) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance measurement • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal lamp to indicate operating status • Max. component height: approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touch screen and height-adjustable keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / Door height (pass-through): 400mm • 230V connection • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, skupna masa: 160 kg, skupna dolžina: 1.300 mm, skupna širina: 800 mm, skupna višina: 1.930 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, valovna dolžina laserja: 10.600 nm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: CO₂ laser, Oprema: osvetlitev, The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. After prior setup, the software independently increments serial and article numbers. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a handheld scanner is also possible. A laptop including a mounting bracket with a Windows operating system is included as standard equipment. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Additional options, such as side-mounted supports for marking long components, are also available. 60 Watt CO2 laser (optional: 30 W) • Wavelength: 10,640 nm • Marking field size: 220 x 220 mm • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (including activated carbon filter) • Optional: Supports for large workpieces (also on both sides) • Marking software EZCAD in German / English • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height: approx. 300 mm • Electrically adjustable Z-axis • Laptop including mounting bracket with Windows operating system • Frame made of aluminum profile Fgedpfx Aewkpyhobtoc • Air-cooled • Door width: approx. 720 mm / Door height: 400 mm • Connection: 230V • Dimensions: approx. 1000 x 800 x 2000 mm (L x W x H) • Weight: approx. 160 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 600 mm, skupna širina: 400 mm, skupna višina: 690 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small parts. Thanks to its compact design, the unit is highly practical and can be used anywhere. The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created and marked with just a few clicks and minimal programming knowledge. The software automatically increments serial and article numbers after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. A laptop with Windows operating system and laser software is included as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 watt (optional: 30 watt, 50 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm Fgsdpfx Aey Emthjbtoc - Electrically adjustable Z-axis - Electric door with anti-trap safety stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 100 kg, skupna dolžina: 800 mm, skupna širina: 600 mm, skupna višina: 1.660 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta laserja: vlakenski laser, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. In addition, the software is capable of reading data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transferring them into predefined sections. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long workpieces, are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – system for automatic determination of focus distance • Signal lamp to indicate operating status • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 270mm • Electrically adjustable Z-axis (work surface adjustment) • Frame made of aluminum profile • Connection 230V Fedpov Sybyefx Abtjgc • Air cooled • Laptop with Windows OS • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovno območje: 400 mm, višina izdelka (maks.): 30 mm, trajanje garancije: 12 meseci, model krmilnika: SPS-Steuerung Siemens Simatic HMI, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, natančnost pozicioniranja: 1 mm, Oprema: CE označba, dokumentacija / priročnik, osvetlitev, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker Fgsdpfx Aeyycqxjbtjc • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Leto izdelave: 2025, obratovalne ure: 2 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 900 mm, skupna širina: 800 mm, skupna višina: 1.900 mm, laserske ure: 2 h, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: Raycus, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking tasks. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create text, numbers, 2D codes, QR codes, and logos with just a few clicks, without any programming knowledge. The software can automatically increment serial and article numbers after prior configuration. In addition, the software can extract data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes a laptop with mounting bracket, Windows operating system, and laser software. Optionally, the LAS 28 XL laser system can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral extensions for marking long parts, movable Z-axis, drawer systems, etc., are also available. Made in Germany Fiber Laser 30 Watt • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger optional) • Marking software EZCAD in German / English • Signal tower to indicate operating status • Optional: rotary axis (3-jaw chuck) • Optional: fume extraction (incl. activated carbon filter) • Optional: extension arms for large parts (single- or double-sided) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 300mm • Electrically adjustable Z-axis • Laptop incl. bracket with Windows operating system • Frame made of aluminum profile • Air cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) Fgodpfx Aboqfcvietjc • Weight: approx. 100 kg