Mütek Mhb; Mhz nakup rabljenega (108)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced blade projection, suitable for hard and soft materials + 22 kW motor + Effective square cutters/blades *For pallets: up to a maximum of 10 pallets per hour *Depending on screen and material. Considerably higher throughput with smaller residual wood. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: colour of the machine may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown when rotor is idling - 70-90 rpm for high throughput performance - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-dampening machine feet - CE compliant The following options are available at an extra charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Enlarged hopper extension 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% Hnodpfxjx Af Rdj Amhsr - Material feed must be free from metals and mineral impurities. Damage to the tools and/or increased wear may result.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, Hnodsd N Dnhjpfx Amhsr 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2026, Production time for the machine approx. 3.5 months Very robust machine with high pressing force - Also suitable for already producing a saleable briquette quality, depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development and expertise + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted) * cools the pressing tongs (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a stretch. Large pre-compactor chamber + €1,975 net Recommended for lightweight input materials such as planing shavings Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (depending on material): up to 110 kg/h* Last test: approx. 87 kg/h *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,925 mm Width: 1,100 mm Height: 1,500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Press tong cooling option: yes, with special accessory of coolable press tongs Cooling of the press tongs via a water tank (must be supplied by the customer) Hnjdpoffh Atjfx Amhsr Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette option: yes (material-dependent) CE compliant . Requirements for the raw material: - The moisture content (oven dry basis) must be at least 6% and no more than 18% - Maximum chip length: 15 mm - Installation temperature: heated room of at least +5°C - The feed material must be free of metal and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Throughput is highly dependent on screen and input material: Hnodpfx Ash S H T Ujmhsr - Up to 60 kg/h with EPS using a 15 mm screen *The coarser the screen, the higher the throughput. Motor: 9.2 / 11 kW, 400 Volt Robust steel construction Hardened cutting blades Screen with interchangeable inserts, optionally available in (8), (10), 15, 22, 26, 30, 40, or 60 mm perforations With electric drive: star-delta switch, overload protection, and 8 m power cable – plug-ready Blow-out nozzle 150 mm, optional for plastic or grain pipes Blowing range approx. 12 m Chassis with 2 running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm), all wheels with solid rubber tires Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare parts and options: 24 hardened blades, each €9.90 (net) 6 bolts, each €14.90 (net) 1 screen €475 (net) Cover €290 (net)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for trade fair demonstration unit *Available upon request New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully produced and in stock; only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low susceptibility to faults Hnedpfx Asd Su Hxemhjr + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front sleeve: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height: 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option - press plier cooling: no Option - hydraulic oil cooling: yes Option - level monitoring: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Stanje: dober (rabljeno), Clean air extraction Used machine, good condition Hedsrb D Nepfx Amhsnr Pictures to follow Mobile Jet 160 Connection: 160 mm Fan: 2.2 kW Airflow: 1,850 m³/h / 400 V

Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530 Included: + Profile rotor for increased throughput performance Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: reversible multiple times, Rotor diameter: 260 mm, Hnsdpod Db N Iofx Amhsr Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume approx. 0.4 cbm, Throughput capacity: 1 – 5 hopper fillings/h, Hydraulically operated pusher, Screen perforation as required (10 – 40 mm), Suction connection Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% absolutely dry. Standard features: • Fast hydraulic system • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start-up • Automatic shutdown in case of idling rotor • Removable extraction chute • Rotation speed 70 – 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control of the hydraulic pusher • Stable guides for the hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €5,980 net - Synchronised control for conveyor and overband magnet + €2,750 net (Start and stop synchronised with the shredder) Requirements for input or raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: novo, Leto izdelave: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple cutting edges (reversible) Hydraulically operated pusher Screen perforation size as desired (10–40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor runs idle - Rotor speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform The shredder is designed for processing solid wood, chipboard, MDF panels, and other materials upon testing and approval by the manufacturer. Additional shredder options: - Height increase by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Hedpfx Aed Dgw Usmhonr Angle: adjustable from 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Controls for conveyor and overband magnet + €2,750 net (Start and stop synchronized with shredder) Raw material requirements: - Moisture content (atro) must be below 30% - Installation temperature: heated room, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. increase wear

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear Hnedjd Nnwljpfx Amhjr --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Stanje: novo, Leto izdelave: 2026, Idealni stroj za drobljenje mehkega lesa. . Motor: 11/15 kW; 400 V - 50 Hz - 3 fazni, Premer rotorja: 260 mm, hidravlično vodeno potisno kolo Sito po izbiri (12 - 40 mm) Priključek za odsesavanje Ø 160 mm Teža cca 1.100 kg Mere (d x š x v) cca 1805 x 1118 x 1650 mm Barva: modra / siva Zahteve za surovino: - Vsebnost vlage (atro) mora biti pod 30 % - Kovine in mineralne nečistoče, kot so pesek, kamni itd., povzročajo povečano obrabo. . Hodpfx Aewzarcomhonr Z veseljem vam ponudimo brezplačen preizkus z vašim materialom. Vabimo vas k nam v Neckartailfingen. Prav tako je možno, da nam material pošljete prek špedicije in mi test dokumentiramo s fotografijami in videi.

Stanje: novo, Leto izdelave: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (Shipping €14.90 net) Hjdpfx Ajtqfhxemhonr *Please refer to image 2 for construction lengths The active side features a stainless steel end plate (material 1.4301). Threaded holes are provided on the reverse for mounting *Handle available on request The block magnet systems can be used up to a maximum operating temperature of +100°C. The magnet surface should be cleaned regularly of captured iron parts. Attraction heights for all types, e.g.: For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Mounting Example 1: Mounted above a conveyor belt, the iron parts "jump" onto the magnetic contact surface. Mounting Example 2: Installed in a pipeline system in direct contact with the material flow. For high separation security, a cascade arrangement of several block magnets in series is possible. Installation and safety instructions: When handling, even during unpacking and later mounting, ensure that no loose iron parts, such as tools or screws, are nearby. The magnetic force is so strong that painful injuries can occur if fingers get caught between iron parts and the active surface. No steel parts should be present within a minimum distance of 400 mm underneath the active surface.

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net Hodjd E R D Sjpfx Amhjnr (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor available immediately Advantages: + special rotor with reduced knife overhang + 22 kW motor + efficient square knives *For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm Hydraulically operated pusher Screen perforation currently (15/20 mm) *can be exchanged Suction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Hnjdpfx Aodv Eu Hjmher Sample image above: Plant color may vary Weight: 1920 kg Standard features: - Control cabinet with PLC control - Automatic star/delta start-up - Fast hydraulics - Automatic shut-off when rotor runs idle - Rotational speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *See last 2 images. - Additional knife row + €2,790 - Segment floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation) - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40 mm, reversible multiple times, Rotor diameter: 260 mm, Control unit: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 cbm, Hydraulically operated pusher, Screen perforation as required (15–40 mm), Extraction port Ø 160 mm, Weight: approx. 1,300 kg, Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Hedpfx Aegmfa Aomhonr The following options available at extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for sectional floor, 4-sided + €2,170 net (Prevents pusher blockage. Recommended when shredding plastics, paper, veneer with thickness < 3 mm). - Raise shredder by 30 cm (ready for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Conveyor belt and overband magnet controls + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Raw material requirements: - Mineral contamination such as sand, stones, etc., leads to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us via freight forwarder, and we will document the test with photos and videos.

Leto izdelave: 2024, stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. Hnedpfx Asff Sbismhjr mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Stanje: rabljeno, Machine de broyage MGZ 1330, 37 kW Heures de fonctionnement : 275 Inclus : - 2ème rangée de couteaux - Hydraulique rapide, pour un débit accru - Préparation pour bande transporteuse En option : - Bande transporteuse avec séparateur automatique de métaux Vos avantages : + Ouverture du caisson de coupe extrêmement grande : en haut 1300x1200mm + Rotor spécial adapté pour bois dur et bois tendre + Économique en énergie et puissant, avec 37 kW au démarrage Données techniques : Ouverture d’alimentation (en haut, mm) : 1.300 x 1.200 Volume de la trémie (m³) : 1,6 m³ Diamètre du rotor (mm) : 368 Vitesse du rotor (tr/min) : 65 - 125 Puissance requise (kW) : 37 Tamisage (mm) : selon accord Outils : 37/70 couteaux Diamètre de la buse d’aspiration (mm) : 200 mm Dimensions (LxLxH) : 2430x2410x1735 mm Hnjdpfxsx Tfdho Amhjr Poids (env. kg) : 3 500 --- Exigences pour la matière première : - La teneur en humidité (atro) doit être inférieure à 20 % - L’alimentation doit être exempte de métaux et d’impuretés minérales. Des dommages aux outils et/ou une usure accrue risque d’en découler.

Stanje: zelo dobro (rabljeno), Cena podana za 1 kos. Profesionalni digitalni osciloskop LeCroy 9354AL namenjen je za napredne merenje i dijagnostiku elektronskih kola. Uređaj je opremljen sa 4 merenja kanala, širinom pojasa od 500 MHz i visokom frekvencijom uzorkovanja, te nalazi primenu u istraživačkim laboratorijama, servisima elektronike, industrijskoj automatizaciji i R&D odeljenjima. Tehnički podaci: • Proizvođač: LeCroy • Model: 9354AL • Tip: digitalni osciloskop • Pojas: 500 MHz • 4 merenja kanala • Uzorkovanje do 2 GS/s • Memorija akvizicije do 8 Mpts • BNC ulazi • Ugrađeni CRT ekran Stanje: Korišćen uređaj, ispravan. Osciloskop se ispravno pokreće i prikazuje talasne oblike. Vidljivi normalni tragovi upotrebe koji proizilaze iz eksploatacije i skladištenja. Hnedpozaf Skefx Amhsr Napomena: Jedan od plastičnih delova kućišta sa zadnje strane ima naprsnuće. Oštećenje je isključivo kozmetičke prirode i ne utiče na funkcionalnost niti radne karakteristike uređaja.

Stanje: skoraj kot novo (rabljeno), Hollow tooth of carbide-tipped saws grinding machine VOLLMER model MHZ Hodpfxshcw N Es Amhonr

Stanje: zelo dobro (rabljeno), Keysight / Agilent InfiniiVision MSO-X 3034A Proizvajalec: Keysight Technologies / Agilent Technologies Tip: MSO-X 3034A Serija: InfiniiVision Vrsta naprave: Mešani signalni osciloskop / digitalni shranjevalni osciloskop Frekvenčno območje: 350 MHz Naprodaj je rabljeni Keysight / Agilent InfiniiVision MSO-X 3034A mešani signalni osciloskop. Osciloskop je primeren za natančne signalne in merilne naloge v razvoju, laboratoriju, servisu, izobraževanju, raziskavah ter v industrijski elektroniki in zagotavljanju kakovosti. Hodpszh I Dwsfx Amhsnr Z 4 analognimi kanali, 16 digitalnimi kanali in največjo vzorčno hitrostjo 4 GSa/s naprava omogoča vsestransko uporabo pri zahtevnih merilnih nalogah. Tehnični podatki Proizvajalec: Keysight Technologies / Agilent Technologies Serija: InfiniiVision Tip: MSO-X 3034A Vrsta naprave: Mešani signalni osciloskop / digitalni shranjevalni osciloskop Frekvenčno območje: 350 MHz Analogni kanali: 4 Digitalni kanali: 16 Maks. vzorčna hitrost: 4 GSa/s Zaslon: barvni zaslon MegaZoom tehnologija Vhodi: 4 × BNC analogni Logični/digitalni vhod USB host USB naprava Trigger out Zunanji trigger / kalibracijski priključek Omrežni priključek: 100–240 V AC Frekvenca: 50 / 60 Hz Poraba energije: maks. 100 W Dimenzije (Š × V × G): pribl. 381 × 204 × 142 mm Teža: pribl. 4 kg Oprema Velik barvni zaslon Sprednje kontrolne tipke 4 analogni kanali 16 digitalnih kanalov MegaZoom tehnologija USB host USB naprava Trigger- in analizne funkcije Merilne, shranjevalne in tiskalne funkcije Ročaj za prenašanje 3 merilne sonde glede na slike Omrežni kabel Dodatna oprema po slikah Področja uporabe Razvoj elektronike Laboratorij Servis Iskanje napak Analiza signalov Testiranje tiskanih vezij Izobraževanje Raziskave in razvoj Zagotavljanje kakovosti Industrijska elektronika Obseg dobave Keysight / Agilent InfiniiVision MSO-X 3034A 3 merilne sonde (glede na slike) Omrežni kabel Dodatna oprema po slikah Stanje Rabljeno. Vizualno stanje glede na slike. Certifikacijske nalepke in oznake kot na slikah so prisotne. Obseg dobave po opisu in slikah. Pridržujemo si pravico do sprememb, napak in vmesne prodaje.

Stanje: novo, Leto izdelave: 2025, Dimenzije (dolžina/širina/višina): 7600x1400x1800 mm Teža: 2950 kg Skupna potrebna moč: 9,15 kW Ekstruder MHB-1560 AUTOMATIK - samodejno podajanje preko transportnega traku - maks. dolžina stiskanja: 6000 mm - maks. širina obdelovanca: 150 mm - maks. višina obdelovanca: 80 mm - maks. delovni pritisk: 7500 kg - motor hidravlične črpalke: 4,0 kW - motor pomika: 0,75 + 1,1 kW - motor prečne žage: 2,2 kW - napetost: 50 Hz, 400 V - skupna moč: 8,05 kW - število vrtljajev žage: 2800 U/min - premer žaginega lista: 350 mm, izvrtina 30 mm - hitrost pomika: 30 – 60 m/min - potreba po stisnjenem zraku: 8 bar Hnjdevz Hu Eepfx Amhjr - mere: L = 7600, Š = 1400, V = 1800 mm - teža: 2950 kg

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 3960x1400x1800 mm Teža 1200 kg Skupna moč 9,15 kW Ekstruder MHB-1525 AUTOMATIK - avtomatsko podajanje preko transportnega traku - maks. dolžina stiska 2500 mm - maks. širina obdelovanca 100 mm - maks. višina obdelovanca 80 mm - maks. delovni pritisk 7500 kg - motor hidravlične črpalke 4,0 kW - motor podajalnika 0,75 + 1,1 kW - motor za prečno žago 2,2 kW - napetost 50 Hz, 400 V - skupna moč 9,15 kW - hitrost žage 2800 vrt/min Hnjdpfx Asx Emu Eomhjr - premer žaginega lista Ø 350 mm, odprtina 30 mm - hitrost podajanja 30 - 60 m/min - potreba po stisnjenem zraku 8 bar - dimenzije D=3960, Š=1400, V=1800 mm - teža 1200 kg

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 4600x1400x1800 mm Teža 2200 kg Skupna moč 9,15 kW Ekstruder MHB-1531 AUTOMATIK Hjdpfxox Emvcj Amhjnr - samodejno podajanje preko transportnega traku - maks. dolžina stiskanja 3100 mm - maks. širina obdelovanca 100 mm - maks. višina obdelovanca 80 mm - maks. delovni pritisk 7500 kg - motor hidravlične črpalke 4,0 kW - podajalni motor 0,75 + 1,1 kW - motor prečne žage 2,2 kW - napetost 50 Hz, 400 V - skupna moč 9,15 kW - hitrost žage 2800 obr/min - žagin list Ø 350 mm, izvrtina 30 mm - hitrost podajalnika 30–60 m/min - potreba po stisnjenem zraku 8 barov - dimenzije: D=4600, Š=1400, V=1800 mm - teža 2200 kg

Stanje: novo, Leto izdelave: 2025, Dimenzije (dolžina/širina/višina): 6000x1400x1800 mm Teža: 2500 kg Skupna moč: 8,05 kW Ekstruder MHB-1545 AUTOMATIC - samodejno podajanje preko transportnega traku - maks. dolžina stiskanja 4500 mm - maks. širina obdelovanca 150 mm - maks. višina obdelovanca 80 mm - maks. delovni tlak 7500 kg - motor hidravlične črpalke 4,0 kW - motor potiska 0,75 + 1,1 kW - motor krožne žage 2,2 kW - napetost 50 Hz, 400 V - skupna moč 8,05 kW - hitrost žage 2800 obr/min - premer žaginega lista 350 mm, izvrtina 30 mm - hitrost podajanja 30 - 60 m/min - potreba po stisnjenem zraku 8 bar - dimenzije: D=6000, Š=1400, V=1800 mm Hnedsx Emu Sepfx Amhjr - teža 2500 kg

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 150 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AMW200SM56T4002J, Mikrovalovna naprava za hitro in brezodpadno odtajanje zamrznjenih blokov mesa, perutnine, rib ipd. Opremljena je s komoro za ciklični način delovanja (polnjenje – odtajanje – jemanje iz komore). Idealna za odtajanje zamrznjenih blokov v nekaj minutah (sprememba temperature iz -20 °C na -4/-2 °C). Bloki ostanejo dovolj ohlajeni za nadaljnjo obdelavo (rezanje). Čas odtajanja iz -20 °C na -2 °C se lahko razlikuje glede na debelino blokov. Moč: 10 kW Napetost: 3 x 400 V, 50/60 Hz Enkratna obremenitev: do 55 kg (npr. 2 bloka velikosti 600 x 400 x 200 mm) Čas odtajanja: 4–15 minut (odvisno od želenega stanja po odtajanju) Hnodpfx Aex D Aqdemhsr Mikrovalovna frekvenca: 915 MHz Vodeni tlak: 4 bara Poraba vode: 12 l/min pri temperaturi 18–22 °C Poraba zraka: 20 litrov/min Tlak zraka: 6 bar Vse dodatne informacije so na voljo na zahtevo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, permissible gross weight: 750 kg unladen weight: 140 kg payload: 610 kg 1 axle, tyres: 13" internal dimensions of box: 2010 x 1255 x 330/430 mm total length: 3250 mm total width: 1700 mm total height: 920 mm Hnjdpjd Eckxjfx Amhor