Mütek Hawk-Eye nakup rabljenega (3.130)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for trade fair demonstration unit *Available upon request Bodjd Su Hxspfx Agqjwp New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully produced and in stock; only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front sleeve: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height: 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option - press plier cooling: no Option - hydraulic oil cooling: yes Option - level monitoring: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO Bjdpfed Nnwlex Agqewp - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Leto izdelave: 2025, stanje: novo, Granulator MVZ 7.5 kW Demonstration unit available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for the secondary size reduction of wood chips. More details can be provided after testing with your material. Our granulators are used for size reduction of a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for a variety of shredding tasks. For example, in injection molding machines, scrap parts and sprues are produced that need to be recycled. In blow molding machines, along with scrap parts, trim waste or start-up parisons must be processed. Materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes from blow molding can be processed. Material is fed from above via a hopper into the grinding chamber of the granulator. The internal rotor is equipped with knives. The material is shredded between the rotating knives and the stationary knives mounted in the grinding chamber housing until it passes, as defined regrind, through the screen located below the rotor. *Option: The ground material is usually pneumatically conveyed to big bags, silos, or other containers. The price applies only to the size reduction unit as shown in image 1 - Fan, cyclone, and filter are optional components. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger machines available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding of PE 1000 plastic Input material: approx. 40 mm chip length Secondary shredding to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ Significantly higher throughputs can be achieved when re-shredding G 30 wood chips. Up to a maximum of 400 kg/h with a 10 mm screen *metered feed, e.g., via conveyor belt or auger. Details available after a test run with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Suction nozzle: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – other sizes available on request Price per screen: €390 Price for replacement knife set: €679 Suitable for example for: - All types of plastic waste Various materials – HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger units available as options: Bwedpfx Aged N Dn Doqep Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *dependent on screen and material Opening: 620 x 400 mm *optional with matching extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *dependent on screen and material Opening: 620 x 500 mm *optional with matching extraction/conveying system --- To select the right machine, the following information is required: - Length x width x height of the feed material? - Required screen size (final output size in mm)? - Required throughput per hour in kg? - Wall thickness in mm? - Material description Photos can also be helpful

Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530 Included: + Profile rotor for increased throughput performance Bodpsd Db N Iofx Agqewp Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume approx. 0.4 cbm, Throughput capacity: 1 – 5 hopper fillings/h, Hydraulically operated pusher, Screen perforation as required (10 – 40 mm), Suction connection Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% absolutely dry. Standard features: • Fast hydraulic system • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start-up • Automatic shutdown in case of idling rotor • Removable extraction chute • Rotation speed 70 – 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control of the hydraulic pusher • Stable guides for the hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €5,980 net - Synchronised control for conveyor and overband magnet + €2,750 net (Start and stop synchronised with the shredder) Requirements for input or raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: novo, Leto izdelave: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple cutting edges (reversible) Hydraulically operated pusher Screen perforation size as desired (10–40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor runs idle - Rotor speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform Bwodsd Dgw Ujpfx Agqop The shredder is designed for processing solid wood, chipboard, MDF panels, and other materials upon testing and approval by the manufacturer. Additional shredder options: - Height increase by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Controls for conveyor and overband magnet + €2,750 net (Start and stop synchronized with shredder) Raw material requirements: - Moisture content (atro) must be below 30% - Installation temperature: heated room, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. increase wear

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor available immediately Advantages: + special rotor with reduced knife overhang + 22 kW motor Bwedpfxsdv Eu He Agqjp + efficient square knives *For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm Hydraulically operated pusher Screen perforation currently (15/20 mm) *can be exchanged Suction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Plant color may vary Weight: 1920 kg Standard features: - Control cabinet with PLC control - Automatic star/delta start-up - Fast hydraulics - Automatic shut-off when rotor runs idle - Rotational speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *See last 2 images. - Additional knife row + €2,790 - Segment floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation) - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Bodpfx Asgmfa Asgqowp Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40 mm, reversible multiple times, Rotor diameter: 260 mm, Control unit: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 cbm, Hydraulically operated pusher, Screen perforation as required (15–40 mm), Extraction port Ø 160 mm, Weight: approx. 1,300 kg, Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options available at extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for sectional floor, 4-sided + €2,170 net (Prevents pusher blockage. Recommended when shredding plastics, paper, veneer with thickness < 3 mm). - Raise shredder by 30 cm (ready for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Conveyor belt and overband magnet controls + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Raw material requirements: - Mineral contamination such as sand, stones, etc., leads to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us via freight forwarder, and we will document the test with photos and videos.

Stanje: dober (rabljeno), Refurbished used machine *Options at extra cost, see below with full 1-year warranty Delivery time approx. 16 weeks after order Technical specifications: Throughput capacity up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm Including 2 m press channel Main motor power: 45 kW Feed auger with geared motor: 2 x 2.2 kW Compactor auger: 2 x 5.5 kW Distributor auger: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operating states and load display for main drive and feed augers PLC control: Siemens S7/300 with operating hours counter in the control cabinet Machine has CE mark Automatic start/stop function Dimensions: 3,100 x 860 x 1,800 mm (L x W x H) Weight: 4,500 kg Options: Silo for MAP series (only suitable for a MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and fill level sensor. €19,700 net plus VAT. -Temperature control unit for press tools To maintain temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Prewired – absolutely necessary for operation Including corresponding control €7,850 net -Guillotine for cutting briquettes to length Compressed air supply required on site €6,940 net plus VAT. Bedpfx Age E Dqusqowp -Transfer pipe / cooling section (nominal: 4 x 2 m) Per 2 meters €990 net Assembly / commissioning (nominal per press approx. 2–3 days on site) Charged according to actual effort and time, invoiced separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday/night hour: 50% surcharge Each Sunday/public holiday hour: 100% surcharge Daily allowance per technician: depending on country Per car/van and distance kilometer: €0.98/km Travel and accommodation will be invoiced on an actual cost basis or as a flat rate at the buyer’s expense. Material testing with customer-provided material (by arrangement, up to max. 750 kg) – €1,970 net flat rate ---- Raw material requirements: - Moisture content (atro) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Ambient temperature: heated room with at least +5°C - Material must be free of metals and mineral contaminants. Damage to press tools and/or increased wear may otherwise occur.

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . Bwedpfx Agjd E R D Seqjp We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Leto izdelave: 2024, stanje: novo, Overview – The different variants *Not every option is required: Bjdeff Sbispfx Agqewp Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Stanje: novo, Leto izdelave: 2026, Idealni stroj za drobljenje mehkega lesa. . Motor: 11/15 kW; 400 V - 50 Hz - 3 fazni, Premer rotorja: 260 mm, hidravlično vodeno potisno kolo Sito po izbiri (12 - 40 mm) Priključek za odsesavanje Ø 160 mm Teža cca 1.100 kg Mere (d x š x v) cca 1805 x 1118 x 1650 mm Barva: modra / siva Zahteve za surovino: - Vsebnost vlage (atro) mora biti pod 30 % - Kovine in mineralne nečistoče, kot so pesek, kamni itd., povzročajo povečano obrabo. Bjdpfx Agewzarceqjwp . Z veseljem vam ponudimo brezplačen preizkus z vašim materialom. Vabimo vas k nam v Neckartailfingen. Prav tako je možno, da nam material pošljete prek špedicije in mi test dokumentiramo s fotografijami in videi.

Stanje: rabljeno, Machine de broyage MGZ 1330, 37 kW Heures de fonctionnement : 275 Inclus : - 2ème rangée de couteaux - Hydraulique rapide, pour un débit accru - Préparation pour bande transporteuse En option : - Bande transporteuse avec séparateur automatique de métaux Vos avantages : + Ouverture du caisson de coupe extrêmement grande : en haut 1300x1200mm Bwsdpfxjx Tfdhj Agqop + Rotor spécial adapté pour bois dur et bois tendre + Économique en énergie et puissant, avec 37 kW au démarrage Données techniques : Ouverture d’alimentation (en haut, mm) : 1.300 x 1.200 Volume de la trémie (m³) : 1,6 m³ Diamètre du rotor (mm) : 368 Vitesse du rotor (tr/min) : 65 - 125 Puissance requise (kW) : 37 Tamisage (mm) : selon accord Outils : 37/70 couteaux Diamètre de la buse d’aspiration (mm) : 200 mm Dimensions (LxLxH) : 2430x2410x1735 mm Poids (env. kg) : 3 500 --- Exigences pour la matière première : - La teneur en humidité (atro) doit être inférieure à 20 % - L’alimentation doit être exempte de métaux et d’impuretés minérales. Des dommages aux outils et/ou une usure accrue risque d’en découler.

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 665182, potovalna razdalja osi X: 650 mm, pomik osi Y: 550 mm, pomik po osi Z: 500 mm, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, skupna višina: 2.850 mm, skupna dolžina: 3.300 mm, skupna širina: 2.400 mm, skupna masa: 9.000 kg, največja hitrost vretena: 42.000 obr/min, število mest v zalogovniku orodij: 40, Oprema: dokumentacija / priročnik, OPS INGERSOLL SPEED HAWK 650 CNC obdelovalni center - Pomembno obvestilo: vreteno je bilo leta 2025 zamenjano (pribl. 40.000 EUR), zato ima malo ur delovanja! Bjdpfjy Tvcusx Agqjwp - Dimenzije palet: pribl. 320 x 320 mm - Palete so vpete na vrtljivo mizo - Vpenjalo: HSK-E 40 - Za dodatne tehnične podatke glejte slike - S tehnično dokumentacijo - S HSK-E 40 vpenjali za orodja in tremi paletami Pozor: artikel je treba obvezno prevzeti med 21.07. in 23.07.2026 na še dogovorjen termin. FCA D-80339 München – naloženo na tovornjak

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 655118, potovalna razdalja osi X: 550 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, nazivna (navidezna) moč: 38 kVA, skupna višina: 2.300 mm, skupna dolžina: 3.300 mm, skupna širina: 2.200 mm, skupna masa: 7.200 kg, največja hitrost vretena: 42.000 obr/min, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, OPS INGERSOLL SPEED HAWK 550 CNC obdelovalni center (5-osni) - Razdalja HSK-E vpenjala do mize: 450 mm - Zasukalni kot A-osi: -120°/+60° - Zasukalni kot C-osi: n x 360° - Držalo HSK-E 40 - Vpenjalna površina s 4. in 5. osjo: dimenzije palete cca 300 x 300 mm - Največja hitrost pomika: 30 m/min Bjdpfx Agey Tutloqjwp - Ponavljiva natančnost: 0,002 mm - Digitalni prikaz: 0,001 oz. 0,0001 mm (izbirno) - Za dodatne tehnične podatke glejte priložene fotografije - S tehnično dokumentacijo - Vključno s tremi rezervnimi paletami - Opomba: na paletah so bile prilepljene posebne priprave - Vključuje HSK-E 40 vpenjala Pozor: artikel je treba obvezno prevzeti med 21.07. in 23.07.2026 na še dogovorjen termin. FCA D-80339 München – natovorjeno na tovornjak

Leto izdelave: 1995, stanje: rabljeno, x-axis travel: 9,200 mm y-axis travel: 1,600 mm z-axis travel: 2,400 mm Test piece diameter: mm Working area: mm Centre distance: mm Control: ZEISS C 99 Total power requirement: kW Machine weight approx. 30 t Required floor space approx. 10 x 3.6 m ZEISS - STIEFELMAYER Double-sided CNC traversing 3D measuring machine Type: SMM Duplex / Eagle Eye Year of manufacture: 1995, but repeatedly modernized Bjdpfxot Hwwks Agqowp Measuring stand working range: X axis (horizontal): approx. 9,200 mm Y axis (transverse): approx. 1,600 mm / 3,200 mm Z axis (vertical): approx. 2,400 mm Measuring plate dimensions (4-piece): 10,000 x 3,500 mm External dimensions of the measuring plate incl. guide rails: 10,000 x 3,650 mm Measuring plate thickness: approx. 450 mm Height of measuring plate above floor: 650 mm Max. traverse speed: approx. 150 mm/sec Total weight: approx. 30,000 kg Special features / accessories: • Left and right: measuring stands system C / SMM mounted laterally, laterally adjustable along the measuring plate, with column cross-section for vertical adjustment 160 x 160 mm and cantilever arm cross-section for horizontal adjustment approx. 80 x 80 mm • Machine/CNC control type ZEISS C 99, one unit per measuring stand • Mounted probe head type RST-P with DSE rotary and swivel joint and CAA correction, as well as a reference probe, collision protection • EAGLE EYE Navigator for optical measurement, especially of vehicle bodies and other pressed parts, provides significant time savings; retrofitted in 2007 • Probe changing station for 8 probes, mounted at the front on the plate • Measuring plate made of special cast iron, divided into 4 plates = 4 x 5,000 x 1,750 mm, with height-adjustable leveling feet approx. 250 mm high in sufficient quantity • T-slots along the y-axis ±500 mm and various precision bores with threads at specified intervals. Y = ±300 / 700 / 1000 mm Machine is delivered WITHOUT appropriate SOFTWARE! (Remains at factory), without operator panels, and without calibration standards (spheres) Condition: Good to very good – ideal for measuring large automotive body parts Delivery: Ex stock – as inspected (without software & operator panels) Payment: strictly net – upon receipt of invoice We look forward to receiving your order.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK02UXKP0579, merilno območje os X: 550 mm, merilno območje osi Y: 600 mm, skupna masa: 1 kg, natančnost ponavljanja: 0,02 mm, Oprema: dokumentacija / priročnik, ZEISS T-SCAN hawk merilni laserski 3D skener z natančnostjo 0,02 mm + 0,035 mm/m ter tremi načini skeniranja (Standardni – 7 rdečih križev, Fini – 5 modrih linij, Posamezna rdeča linija za globoke luknje). Letnik proizvodnje 2022. Popolnoma funkcionalno in pripravljeno za uporabo. Vključeno: - 3D skener - Kalibracijska plošča - Zmogljiva prenosna delovna postaja Dell, še vedno v garanciji Dell Pro Support - Programska oprema GOM/ZEISS Inspect 2021 z licenco na USB ključku - Trden transportni kovček - Torba za prenosnik - Vsa originalna dokumentacija Možen ogled ter preizkus v delovnem okolju. ZEISS INSPECT 2021 omogoča: • Odpiranje in urejanje novih ter obstoječih projektov • Uvoz oblačnih točk in poligonskih mrež Bwjdpfx Agoyxy Sdoqjp • Kreiranje, obdelava in prilagajanje poligonskih mrež • Konstrukcija elementov: osnovna geometrija, točke, prerezi, krivulje, površine, dimenzije • Uvoz CAD podatkov v standardnih formatih: IGES, VDA, STEP, JT Open, STL, PLY • Uporaba običajnih metod poravnave • Primerjava CAD modela z barvnim prikazom odstopanj • Dimenzioniranje ter ocenjevanje oblike in lege glede na ISO GPS in ASME Y14.5 • Poročilni modul Dostava možna.

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 3.278-870805-1, Part no.: 42.35.53 Bwedpeh Eii Tjfx Agqop Technical data and description: see images

Stanje: zelo dobro (rabljeno), 4x ring eyelet components and 2x stitching head components for Hohner 48/5 S stitching heads Bodpfxjh Eu Tre Agqewp

Stanje: rabljeno, Uporabljeni pregledovalnik steklenic GF HAWK 24 000 BPH Bwjdpsvguytsfx Agqjp Specifikacije stroja in obdelovanih izdelkov Sestava stroja: – klasične komande (plošča s tipkami) – PC strojna oprema (zaslon, tipkovnica in miška) Klasične komande: Za zagotavljanje hitrega in varnega posredovanja operaterja so na voljo tradicionalna upravljala, kot npr.: – ustavitev stroja – zagon stroja – itd. PC strojna oprema: Stroj je opremljen z glavnimi PC komponentami, kot so: – zaslon – tipkovnica – miška Delovna temperaturna območja: Za varno in optimalno delovanje stroja upoštevajte naslednje vrednosti: – temperatura skladiščenja: od -10 do 60 °C – delovna temperatura okolice: od 10 do 45 °C Temperatura v električnih omarah: Glavna elektro omara: – temperatura v elektro omari: t.MAX.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 50.000 h, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, največja hitrost vretena: 40.000 obr/min, 🔧 Technical Specifications Bwsdpfxsyxyz Sj Agqop Machine type: CNC milling machine Axes: 3 axes (X/Y/Z) Travel paths (X/Y/Z): 👉 Approx. 550/400/400 mm (typical for this model, please confirm if required) Machine number: 655083 Year of manufacture: 2010 Main voltage: 400 V / 3~ / 50 Hz Fuse protection: 63 A Power consumption: 32 kVA Machine weight: approx. 7,000 kg 🌬️ Extraction and filtration system (major benefit) Manufacturer: KELLER Lufttechnik Type: L-CUT-1-P3-B60-V Motor power: 3.3 kW Year of manufacture: 2010 👉 Integrated dust/fume extraction 👉 Significantly cleaner working environment 👉 Ideal for continuous operation in toolmaking 🧩 Features CNC control with operator panel 3-axis machining Compact and robust design Complete system including extraction unit Made in Germany 📦 Condition Machine from running production Fully functional Well maintained Power-on inspection possible 🚛 Delivery Short-term availability Free loading onto truck 📌 Applications Mold making Electrode production Precision machining 📞 Note Further pictures, videos, and technical details available on request. Subject to prior sale.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 675002, potovalna razdalja osi X: 650 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 500 mm, Oprema: transportni trak za ostružke, TEHNIČNI PODATKI Pomik X-os: 650 mm Pomik Y-os: 1.100 mm Pomik Z-os: 500 mm Vrtenje C-osi: 360° PODATKI O STROJU Krmiljenje: CNC Dimenzije in teža Dimenzije (D x Š x V): 3.500 x 1.800 x 2.800 mm Lastna teža: 13.000 kg Bedpfx Asy Rxryogqswp OPREMA Transporter ostružkov Orodni magazin Merilna sonda

Stanje: zelo dobro (rabljeno), Various ZEISS Eagle Eye navigator units as shown in the image available for sale. Bwedpfx Asdy Apvjgqep Manufacturer's product description: Fast quality assurance in body construction In addition to countless holes, automotive manufacturing also requires measurement of edges, cuts, or transitions. Especially during serial inspection, hole verification is an extremely time-consuming task. With the EagleEye Navigator, almost half the time can be saved when inspecting a complete body-in-white. Typical labour-intensive steps involved in conventional measurement methods are completely eliminated: no insertion and removal of hemispherical adapters, zero material or handling costs, no storage overhead. Shorter cycle times and high quality And that's not all: using the ZEISS EagleEye navigator immediately shortens measurement cycle times and simultaneously increases the quality of pressed parts. The result is an exactly analysable outcome including data on the diameter, position, and shape of the measured feature – with micrometre precision. With the ZEISS EagleEye navigator, the measuring machine becomes a true production asset. Data and price: on request! We are happy to provide you with a detailed quote! Please note: Our offer is directed exclusively at professional customers! (Specifications, information and pricing subject to alteration and prior sale!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK02UXKP0365, merilno območje os X: 550 mm, merilno območje osi Y: 600 mm, Dražba Zeiss T-Scan Hawk z le 20 delovnimi urami! TEHNIČNI PODATKI Maksimalno merilno območje: 550 mm x 600 mm Merilna natančnost: 0,02 mm + 0,035 mm/m Bwjdpfx Aox Sqfnjgqsp PODROBNOSTI O STROJU Laserski razred: Razred 2M (varen za oči) v skladu z IEC 60825-1:2014 Delovne ure: 20 OPREMA Prenosnik Programsko opremo GOM Inspect

Stanje: rabljeno, Hohner spenjalna glava Ringöse 52/8 Stanje kot na sliki Bwjdpfexwxfqsx Agqsp

Stanje: novo, Spenjačeva glava Hohner 52/8 Bjdoxwx Raepfx Agqswp Stanje kot na sliki