Notranji brusilnik za cevi nakup rabljenega (24)

Stanje: novo, Pipe diameter: 10–114 mm Abrasive belt dimensions: (2x) 50 x 940 mm Abrasive belt speed: 3–22 m/s Codjd Ab U Dopfx Afqoaa Details: Technical specifications: - Working capacity Ø: 10–114 mm - Number of grinding units: 2 - Belt speed: 3–22 m/s - Belt dimensions: (2x) 50 x 940 mm - Motor power: 5 kW - Weight: 265 kg - Perfect choice for grinding and polishing - Ideal for round and oval pipes - Foot pedal for opening the belts enables easy insertion and removal of the pipe - Machine equipped with 2 permanently rotating triangular grinding units - Machine and equipment comply with CE regulations - Operating manual available in GERMAN and ENGLISH

Stanje: dober (rabljeno), Leto izdelave: 2006, Interna št. artikla: 25061 Nastavljiv stroj za mokro brušenje Knopp Rundomat - N Leto izdelave: 2006 Velikost traku: 120 x 3000 mm Dolžina obdelovanca: 120 - 1000 mm Casdpfoxcttyjx Afqsa Vključno z različnimi brusnimi trakovi, podpornimi letvami ipd. Mere (DxŠxV): 170 x 150 x 190 cm Teža: pribl. 500 kg Stroj je popolnoma delujoč, vendar močno umazan.

Stanje: novo, Leto izdelave: 2024, Motor: 4 kW Voltages: 230V 3-phase, 400V 3-phase, or 460V 3-phase Belt speed: 45 m/s, 4300 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Grinding diameter: Ø20–Ø114.3 mm Grinding angle: 20° – 90° Operation: Lever and manual wheel controls Cajdpoxyyx Djfx Afqea 2-in-1 Tube Notcher The new AL150HS features a belt speed of 45 m/s due to its unique gearbox. By opening the rear hatch, the tube notcher can also be used as a belt grinding machine, ideal for deburring polished profiles. The AL150HS can be operated either via two handwheels or a lever—both options are available on the machine. The AL150HS allows you to grind material from Ø20 to Ø114.3 mm. Both the cross support and the carriage with rotating clamp are infinitely adjustable. This means all tube profiles can be ground at any desired angle from 20° to 90°. With the AL150HS by ALMI, square, rectangular, and round tubes with varying wall thicknesses and all standard materials can be processed. The ALMI belt adjustment system makes it even easier to set the grinding belt using the supplied hex key. The belt can be quickly tensioned, and the grinding rollers can be changed within seconds. High-Speed Grinding Thanks to new developments, ALMI has achieved a grinding speed of 45 m/s with the updated AL150HS. This provides the grinding belt with a longer service life, as higher grinding speed reduces heat generation in the material, resulting in less discoloration and fine dust.

Stanje: novo, Condition: new Delivery time: approx. 2 weeks from order placement Country of origin: Netherlands Price: €4,417 Abrasive belt dimensions: 100 x 2,000 mm Tube diameter: 20 - 76.1 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 3 kW Weight: 220 kg The AL100U-02 model can be operated either with two handwheels or with a lever. Both options are available on the machine. With the AL100U-02 model, you can grind material from Ø20 to Ø76. The support cross and the carriage with rotary clamp are continuously adjustable. This allows all tube profiles to be ground at any desired angle from 30° to 90°. The ALMI AL100U-02 is capable of grinding square, rectangular, and round tubes with various wall thicknesses and is suitable for all common materials. The ALMI belt adjustment system makes setting the abrasive belt with the supplied hex key even easier. The abrasive belt can be quickly tensioned, and changing the grinding rollers is accomplished in just a few seconds. All tube notching machines are equipped with a deburring table. Cedpewir Dmefx Afqjaa Includes 5 abrasive belts and 1 grinding roller Ø 42.4 mm

Stanje: novo, - Capacity 17–90 mm - With 10 rollers - Angle adjustment - Documentation Cajdpelwq R Sefx Afqsa - 400V

Stanje: novo, Technical Data: Band speed: 15 / 30 m/s Grinding diameter: 20 - 76 mm Carriage adjustment: 30° - 90° Caodpfx Afeqvmqyjqea Flat grinding table: 400 x 100 mm Contact wheel ø x width: 195 x 100 mm Extraction port ø: 2 x 75 mm Speed: 1420 / 2660 rpm Motor power: 2.5 / 3.3 kW Dimensions (W x D x H), approx.: 750 x 1400 x 1200 mm Weight, approx.: 148 kg Features: - Consistent belt tension thanks to spring-loaded tensioning mechanism - Standard with round grinding device for diam. 20 - 76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface improves the sliding properties of the abrasive belt - Large-sized flat grinding surface with protective cover - Low belt speed (15 m/s) ideal for grinding stainless steel and aluminium - User-friendly belt change, quick and straightforward - Fast and easy change of grinding rollers without tools - Various grinding angles from 30° to 90° possible without issue - Shorter processing times compared to milling Scope of supply: - Abrasive belt K 36 - Rubberised grinding roller - 1 pc. grinding roller for 1 1/4" (42/44 mm tube) - 2 pcs. foldable protective screens - Grinding and support table - 2 x dust extraction ports diam. 75 mm - 2 pcs. chip collection containers - Graphite coating - Motor protection switch

Stanje: novo, Bernardo Belt Grinding Machine KBR 100 x 2000 Duo Belt dimensions: 100 x 2000 mm Belt speed: 15 / 30 m/sec Min./max. tube diameter: 20 – 76 mm Carriage adjustment: 30° – 90° Surface grinding table: 400 x 100 mm Contact wheel Ø x width: 195 x 100 mm Extraction port Ø: 2 x 100 mm Speed: 1410 / 2850 rpm Motor output S1 100%: 2.2 / 2.8 kW (400 V) Motor input S6 40%: 3.0 / 4.0 kW (400 V) Machine dimensions (W x D x H): 750 x 1450 x 1160 mm Weight: approx. 158 kg Features • Consistent belt tension due to spring-loaded clamping device • Comes standard with tube grinding attachment for pipes with diameters from 20 – 76 mm • Quick and easy adjustment of the required grinding angle Caodjd Id Ubspfx Afqja • Graphite backing on the surface grinding area enhances the glide characteristics of the abrasive belt • Large surface grinding area with protective cover • Low belt speed (15 m/sec) is ideal for grinding stainless steel and aluminium • User-friendly belt change, fast and uncomplicated • Quick and easy changing of grinding rollers without tools • Various grinding angles from 30° to 90° can be set without issue • Shorter processing times compared to milling Scope of delivery • Abrasive belt K 36 • Rubberized grinding roller • 1 pc. grinding roller for 3/4" tube (26/28 mm tube) • 2 pcs. foldable safety guards • Tube grinding attachment • Grinding and support table • 2 x dust extraction nozzles, diameter 100 mm • 2 pcs. chip collection containers • Graphite backing • Motor protection switch

Stanje: rabljeno, Leto izdelave: 2025, Pipe diameter: 16.0 - 90.0 mm Belt width: 100 mm Belt length: 1250 mm Abrasive belt dimensions: 100 x 1250 mm Total power requirement: 2.2 kW Machine weight: approx. 180 kg Dimensions (L x W x H): 1200 x 600 x 1150 mm Exhibition machine – LIKE NEW Has not been in use yet (!!) New price approx. €4,500 Special price on request The PN 17/90 is a grinding machine designed for grinding the ends of pipes and profiles at the front side. Equipment: - Electromechanical grinding machine for pipe and profile ends - 10x grinding rollers included in delivery Codpjxab N Defx Afqoaa - Incl. storage tray at the rear side of the machine - Simple manual clamping/opening of the material - Lateral adjustment of the material clamping system - Notching up to 50° possible - Machine base frame - Collection tray for easy removal of grinding dust - Emergency stop button at the front - Front protective guard made of plexiglass - Side transport handles for easy transportation

Stanje: novo, Leto izdelave: 2024, Motor: 4 kW Belt speed: 30 m/s, 2800 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Grinding diameter: Ø20–Ø114.3 mm Grinding angle: 20–90º Operation: Lever and manual wheel operation Weight: 260 kg Easy to operate The AL150 can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150, you can grind material from Ø20 up to Ø114.3 mm. The cross support and the carriage with swivel clamp are continuously adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150 from ALMI grinds square, rectangular, and round pipes with various wall thicknesses and is suitable for all common materials. The ALMI belt tensioning system makes adjusting the grinding belt with the supplied hex key even easier. The sanding belt can be quickly tensioned, and the grinding rollers can be changed within seconds. Caedpfxsxyyxwe Afqea 2-in-1 tube grinder The AL150 is equipped with a deburring table, making it easy to deburr pipes, which makes the tube grinder multifunctional.

Stanje: novo, Condition: New Delivery time: approx. 2 - 4 weeks from order Country of origin: Netherlands Price: €7,168 Leasing rate: €138.34 Bestseller 1 Belt dimensions: 150 x 2,000 mm Tube diameter: 20 - 114.3 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 4 kW Weight: 270 kg The new AL150HS 2-in-1 machine: belt grinder and tube notcher. High belt speed with improved drive at 45 m/s. High-speed advantages: less fine dust, reduced discoloration, 2-3x longer belt life. The AL150HS model can be operated either with two handwheels or a single lever—both options are available on the machine. With the AL150HS, you can notch material from Ø20 to Ø114.3. The support cross and the carriage with rotating clamp are infinitely adjustable, allowing all tube profiles to be notched at any desired angle from 30° to 90°. The ALMI AL150HS grinds square, rectangular, and round tubes with various wall thicknesses and is suitable for all common materials. The ALMI belt adjustment system makes adjusting the sanding belt with the supplied hex key even easier. The sanding belt can be tensioned quickly, and changing the sanding rollers takes only a few seconds. All tube notchers are equipped with a deburring table. Includes 5 sanding belts and 1 sanding roller Ø 42.4 mm. Caedpfx Aswirqtefqja (Example photo)

Stanje: novo, - Capacity 16–76 mm Cedpfxjphqgzo Afqjaa - With 10 rollers - Angle adjustment - Documentation - 400V

Stanje: novo,

Stanje: rabljeno, Leto izdelave: 1999, Tehnični podatki: Delovno območje: 10.700 mm Dolžine cevi: 300-11.000 mm Premer obdelovanca - min.: 80 mm Premer obdelovanca - max.: 260 mm Moč: 120 kW Dimenzije: 21,5 x 5 x 3,8 m Teža: 90.000 kg Zmogljivost luščenja: 200 cdm/min HS koda: 8461 90 00 Weingärtner VARIO - luščilni stroj Opis naprave Tip Vario 1200-11000 Namen uporabe: luščilni stroj za cevi in polni material z ultrazvočnim merilnim sistemom za zaznavanje odstopanj debeline stene in njeno korekcijo. Leto izdelave 1999 Cjdovizuijpfx Afqsaa Krmiljenje stroja SIEMENS 840 D – 6 osi Maks. število vrtljajev na luščilni enoti: n = 200 min-1

Stanje: novo, Belt width: 100 mm Belt length: 2000 mm Belt speed: 15 + 30 m/sec Tube diameter: 20 - 76 mm Angle adjustable from 30° to 90° Extraction connection diameter: 2 x 75.0 mm Motor speeds: 1420 / 2660 rpm Flat grinding table: 400 x 100 mm Total power requirement: 2.5 / 3.3 kW Machine weight: approx. 148 kg Dimensions (L x W x H): 750 x 1400 x 1200 mm The KBR 100 x 2000 DUO is a multifunctional grinding machine for tube and profile end grinding at the front, for grinding edges, surfaces and for cylindrical grinding at the rear, as well as for flat grinding on the machine top. Features: Casdpsxab Dzefx Afqsa - Constant belt tension via spring-loaded tensioning system - Supplied with cylindrical grinding attachment as standard - For grinding diameters of 20 - 76 mm - Quick and easy adjustment of the desired grinding angle - Graphite-coated flat grinding surface improves belt glide properties - Large flat grinding surface with protective cover - Low belt speed (15 m/sec), optimal for stainless steel and aluminium grinding - User-friendly belt change, quick and easy - Fast and easy tool-free change of grinding rollers - Various grinding angles from 30° to 90° possible without problems - Shorter machining times compared to milling Scope of delivery: - Abrasive belt K 36 - Rubberized contact roller - 1 piece grinding roller for 1 1/4" tube (42/44 mm tube) - 2 foldable safety screens - Grinding and support table - 2x dust extraction connections, diam. 75 mm - 2 chip collection containers - Graphite coating - Motor protection switch

Stanje: novo, Leto izdelave: 2025, Max Ø 114mm. Straight and bent round tubes. Single grinding station. Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical pipes. The ML planetary belt system enables belt grinding without tube rotation in order to deliver the best possible results. The infeed system safely feeds straight tubes into the grinding station to ensure consistent and productive surface quality. ML100 Working capacity (Ø mm): 3 - 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Belt speed (m/s): 3-22 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Total power (kW): 4.5 Codpfjt Eaw Dex Afqsaa Power consumption (A): 11 Dust extraction port (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Stanje: rabljeno, Leto izdelave: 2019, Condition: Used Year of manufacture: 2019 Stock number: 5505 Delivery time: Prompt, subject to prior sale Country of origin: Netherlands Price: €2,670 In stock: 1 Belt dimensions: 100 x 2,000 mm Pipe diameter: 20 – 76.1 mm Hand lever adjustment: 1 Motor power: 3 kW Cjdpfowiqwlsx Afqjaa Weight: 190 kg DEMONSTRATION MACHINE / LIKE NEW CONDITION For the AL100U-01 model, operation is carried out using a manual lever. With the AL 100U, you can grind material from Ø 20 up to Ø 76.1. The support cross and the carriage with rotating clamp are steplessly adjustable, allowing all pipe profiles to be ground at any desired angle from 30° to 90°. The ALMI AL100U-01 grinds square, rectangular, and round pipes with various wall thicknesses and is suitable for all standard materials. Thanks to the ALMI belt tensioning system, adjusting the sanding belt with the supplied hex key is now even easier. The sanding belt is quickly tensioned and changing the sanding rollers is completed in just a few seconds. All pipe notchers are equipped with a deburring table. Includes: 5 pcs. sanding belts, 1 pc. sanding roller Ø 42.4 mm

Stanje: pripravljen za uporabo (rabljen), Grit pipe grinder GR 75 belt sander offered. Dimensions: 140cm x 60cm x 100cm (LxWxH) 380v With various extra rollers Location: Hamont-Achel, Belgium Caodpfx Afjvily Njqoa Transport possible at extra cost Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. The seller is not liable for typing or data transfer errors. The machine is in terms of appearance, technology and wear and tear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT

Stanje: novo,

Stanje: novo, Tubend TT 90 Pipe Notching Machine Cedpfet Sumaex Afqjaa Pipe Notching Machine incl. 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 49.5 - 57.5 - 73.5 mm Incl. 6 abrasive belts Belt width: 100 mm Belt length: 1250 mm Pipe diameter: 16.5 - 90 mm Angle adjustable from 0 to 65 degrees Connection voltage: 400 V Total power requirement: 2.2 kW Machine weight: approx. 0.18 t Required space: approx. 1.2 x 0.6 x 1.3 m Pipe clamping range: 90 mm Documentation (English)

Stanje: rabljeno, Leto izdelave: 2024, Tube diameter 16.0 - 90.0 mm Belt width 100 mm Belt length 1250 mm Abrasive belt size 100 x 1250 mm Total power requirement 2.2 kW Machine weight approx. 180 kg Dimensions (L x W x H) 1200 x 600 x 1150 mm The TUGRA TT 90 is a grinding machine for grinding tube and profile ends at the front side. Equipment: - Electrically powered grinding machine for tube and profile ends - 10 grinding rollers included in delivery - Incl. storage shelf – rear of the machine - Simple manual clamping/releasing of the material Casdpfx Afexab Dnsqea - Lateral adjustment of the material clamping system - Cut-outs up to 50° possible - Machine base frame - Collection tray for easy emptying of grinding dust - Emergency stop button at the front - Front view protection made of plexiglass - Side transport handles for easy transportation

Stanje: novo,

Stanje: rabljeno, Leto izdelave: 2025, Bandwidth 150 mm Belt length 2000 mm Belt speed 1400 / 2800 rpm Tube diameter 40 - 140 mm Voltage 380 V Total power requirement 3.0 kW Machine weight approx. 360 kg. Exhibition machine - like NEW Never been in use (!!) Original price approx. €6,500 Special price on request Cedjw U U U Dspfx Afqeaa - Machine video - identical machine - ?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for tube and profile end grinding. Features: - Sturdy electro-motorized tube and profile notch grinding machine - Allows notching up to an angle of 50° - Large-dimensioned surface grinding area with protective cover - 2x belt speeds - Control panel at the front left incl. emergency stop button - Grinding belt easily and quickly replaceable - Vice movement possible right – left, forward & backward - Side-mounted dust collection container - Horizontal & vertical grinding orientation possible - 1 set of grinding rollers included (Ø 76-90-114 mm) * Additional sizes available at extra cost

Stanje: novo, Belt width: 100 mm Belt length: 2000 mm Cjdpfx Afsupw Risqjaa Belt speed: 15/30 m/sec Tube diameter: 20 - 76 mm Angle adjustable: 30 - 90 degrees Connection voltage: 400 V Total power requirement: 2.5 / 3.3 kW Machine weight: approx. 0.19 t Space requirement: approx. 1.2 x 0.75 x 0.7 m Belt grinding machine equipped with: - Grinding belt K 40 - With 7 grinding rollers: 20, 28, 32, 41, 48, 60 and 76 mm

Stanje: rabljeno, Leto izdelave: 2025, Širina traku 100 mm Dolžina traku 2000 mm Hitrost traku 15/30 m/s Premer cevi 20 - 76 mm Caedpfx Afexcg Evoqoa Kot nastavljiv od 30 do 90 stopinj Priključna napetost 400 V Skupna poraba moči 2,5 / 3,3 kW Teža stroja ca. 0,32 t Prostorska zahteva ca. 1,2 x 0,75 x 1,4 m Razstavni stroj, neuporabljen. Tračna brusilka z - Brusnim trakom K 40 - z 8 brusnimi valji