Brusilnik za cevi ø20 - ø114,3 mm

ALMI AL 150

Stanje: novo, Condition: New Delivery time: approx. 2–4 weeks from order Country of origin: Netherlands Price: €6,352 Leasing rate: €122.59 Abrasive belt dimensions: 150 x 2,000 mm Gkjdpfeynmqdjx Abrsc Pipe diameter: 20–114.3 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 4 kW Weight: 270 kg The AL150 model can be operated either with two handwheels or with a lever. Both options are available on the machine. With the AL150 you can notch material from Ø20 to Ø114.3 mm. The support cross and carriage with rotating clamp are infinitely adjustable. This allows all pipe profiles to be notched at any required angle from 30° to 90°. The ALMI AL150 machines out square, rectangular, and round pipes with various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, setting the abrasive belt with the supplied hex key is now even easier. The abrasive belt can be quickly tensioned, and the grinding rollers can be changed within seconds. The pipe notchers are equipped with a deburring table. Including 5 abrasive belts and 1 grinding roller Ø42.4 mm (Product image for reference)

Stanje: novo, Belt width: 150 mm Belt length: 2,000 mm Gjdpoirwwpofx Abrjkc Belt speed: 30 - 34 m/sec Total power requirement: 4 kW Machine weight: approx. 100 kg Space requirement: approx. 1.2 x 0.5 x 0.85 m

Stanje: novo, Condition: new Delivery time: approx. 2 - 4 weeks after order Country of origin: Netherlands Price: €7,733 Leasing rate: €149.25 Bestseller 1 Grinding belt dimensions: 150 x 2,000 mm Pipe diameter: 20 - 114.3 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 4 kW Weight: 270 kg The new AL150HS 2-in-1 machine: belt grinder and pipe notcher. High belt speed with an improved drive system at 45 m/s. High-speed benefits: less fine dust, reduced discoloration, 2-3x longer belt life. The AL150HS model can be operated either with two handwheels or with a lever—both options are available on the machine. With the AL150HS, you can notch material from Ø20 to Ø114.3. The support cross and the carriage with a rotatable clamp are infinitely adjustable, allowing all pipe profiles to be notched at any desired angle from 30° to 90°. The ALMI AL150HS grinds square, rectangular, and round pipes of various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, setting the grinding belt with the supplied hex key is now even easier. The grinding belt can be quickly tensioned, and the grinding roller can be changed in seconds. The pipe notcher is equipped with a deburring table. Gkedpfxjwirqto Abrec Includes: 5 pcs. grinding belts, 1 pc. grinding roller Ø 42.4 mm (Representative photo)

Stanje: novo, Leto izdelave: 2026, Motor: 4 kW Voltages: 230V 3-phase, 400V 3-phase, or 460V 3-phase Belt speed: 45 m/s, 4300 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Grinding diameter: Ø20–Ø114.3 mm Gjdpfxozzk Aio Abrskc Grinding angle: 20° – 90° Operation: Lever and manual wheel controls 2-in-1 Tube Notcher The new AL150HS features a belt speed of 45 m/s due to its unique gearbox. By opening the rear hatch, the tube notcher can also be used as a belt grinding machine, ideal for deburring polished profiles. The AL150HS can be operated either via two handwheels or a lever—both options are available on the machine. The AL150HS allows you to grind material from Ø20 to Ø114.3 mm. Both the cross support and the carriage with rotating clamp are infinitely adjustable. This means all tube profiles can be ground at any desired angle from 20° to 90°. With the AL150HS by ALMI, square, rectangular, and round tubes with varying wall thicknesses and all standard materials can be processed. The ALMI belt adjustment system makes it even easier to set the grinding belt using the supplied hex key. The belt can be quickly tensioned, and the grinding rollers can be changed within seconds. High-Speed Grinding Thanks to new developments, ALMI has achieved a grinding speed of 45 m/s with the updated AL150HS. This provides the grinding belt with a longer service life, as higher grinding speed reduces heat generation in the material, resulting in less discoloration and fine dust.

Stanje: rabljeno, Leto izdelave: 2002, številka stroja/vozila: 2204, Universal Radius Metal Belt Grinding Machine Item No. 24541 Technical Specifications: - Belt size: 2000 x 75 mm - Surface grinding opening: 400 x 75 mm - Support vise – angle adjustable: 90° to 30° Gjdpfx Absviudqerjkc - Fine adjustment of support via handwheels - Belt speed: 30 m/sec - Working height: 960 mm - Various grinding rollers: Ø 25, 30, 39, 45, 57 mm - Drive: 400 V / 2880 rpm / 3 kW - Space requirement approx.: W 700 x H 1200 x D 1200 mm - Weight approx.: 125 kg

Stanje: novo, Leto izdelave: 2026, Motor: 4 kW Belt speed: 30 m/s, 2800 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Grinding diameter: Ø20–Ø114.3 mm Grinding angle: 20–90º Operation: Lever and manual wheel operation Weight: 260 kg Easy to operate The AL150 can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150, you can grind material from Ø20 up to Ø114.3 mm. The cross support and the carriage with swivel clamp are continuously adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. Godpfx Abezzkzxsrjkc The AL150 from ALMI grinds square, rectangular, and round pipes with various wall thicknesses and is suitable for all common materials. The ALMI belt tensioning system makes adjusting the grinding belt with the supplied hex key even easier. The sanding belt can be quickly tensioned, and the grinding rollers can be changed within seconds. 2-in-1 tube grinder The AL150 is equipped with a deburring table, making it easy to deburr pipes, which makes the tube grinder multifunctional.

Stanje: novo, Leto izdelave: 2026, Trakovna brusilka za kovino CORMAK STU75 je industrijska trakovna brusilka, zasnovana za širok spekter brusilnih opravil – od ravnih površin, prek robov, do cilindričnih delov, kot so cevi. Zahvaljujoč močnemu motorju, dvostopenjski hitrosti traku in premišljeni konstrukciji, stacionarna brusilka STU75 zagotavlja učinkovitost, natančnost in zanesljivost pri vsakodnevni uporabi. Glavne prednosti stroja: * Nastavljiva hitrost traku 14,5 / 29 m/s – omogoča prilagoditev hitrosti brušenja vrsti materiala in želeni kvaliteti obdelave. * Hitra menjava traku in brusilnih orodij – skrajša čas priprave in poveča operativno učinkovitost delovnega mesta. * Glava z možnostjo nastavitve v navpični in vodoravni položaj – zagotavlja prilagodljivost in omogoča obdelavo različnih delov pod optimalnim kotom. * Spona za cevi z nastavljivim kotom 0–30° – omogoča natančno brušenje cilindričnih elementov pod kotom, na primer pri pripravi za varjenje. * Komplet valjev za cevi različnih premerov – omogoča hitro konfiguracijo za brušenje cevi s premerom do 60,3 mm. * Robustna konstrukcija, ki duši vibracije – poveča natančnost dela in udobje uporabnika. Konstrukcija in tehnologija: Trakovna brusilka CORMAK STU75 je zasnovana za večnamensko delo v zahtevnih industrijskih pogojih. Opremljena je z gumiranim kolesom s premerom Ø200 mm in drsnim nosilcem z valji 120 × 90 mm, kar omogoča učinkovito vodjenje traku in enakomerno pritiskanje na obdelovanci. Integrirana konstrukcija z vodilnim sistemom valjev in vzmetnim sistemom napenjanja zagotavlja varno in gladko delovanje brusilnega traku. Natančnost in učinkovitost: Kombinacija širokega traku 75 × 2000 mm z možnostjo gladkega prehoda med nizko in visoko hitrostjo brušenja zagotavlja učinkovitost tako pri grobi obdelavi kot pri končni obdelavi površine. Uporabljena kotna spona in komplet valjev omogočajo natančno brušenje cevi, hkrati pa zagotavljajo ponovljivost in stabilnost nastavitev. Uporaba: Univerzalna trakovna brusilka za kovino CORMAK STU75 se uporablja v: * proizvodnji ograj, balustrad in konstrukcij iz jeklenih cevi, Gsdpfx Abovu Ukzerokc * obdelavi robov in ravnih površin pred varjenjem ali barvanjem, * tesarskih, orodjarskih in industrijskih servisnih delavnicah, * malih in srednjih proizvodnih linijah. Standardna oprema: * Gumirano kolo Ø200 mm * Drsni nosilec z valji 120 × 90 mm * Spona za brušenje cevi z nastavitvijo 0–30° * Komplet valjev: 20, 21,3, 26,9, 33,7, 42,4, 48,3, 60,3 mm * Brušilni trak 75 × 2000 mm Tehnični podatki: Hitrost traku: 14,5 / 29 m/s Dimenzije brusilnega traku: 75 × 2000 mm Napajanje: 400 V Moč motorja: 2,2 kW Teža: 110 kg Največji premer brušene cevi: 60,3 mm

Stanje: novo, Belt width: 75 mm Belt length: 2000 mm Gksdsirwwlepfx Abrjc Belt speed: 30 - 34 m/sec Total power requirement: 4.1 HP Machine weight: approx. 75 kg Space requirement: approx. 1.2 x 0.5 x 0.85 m Industrial floor belt grinder with the following advantages: - Danish premium quality - Separate emergency stop - Motor brake - Operationally reliable - Simple and practical operation - Easy adjustment - Quick and tool-free belt change - 5-year warranty on the motor - Optimum safety

Stanje: novo, Belt width: 100 mm Belt length: 2000 mm Belt speed: 15/30 m/sec Tube diameter: 20 - 76 mm Angle adjustable: 30 - 90 degrees Connection voltage: 400 V Total power requirement: 2.5 / 3.3 kW Gkjdpfx Aeupw Rijbrsc Machine weight: approx. 0.19 t Space requirement: approx. 1.2 x 0.75 x 0.7 m Belt grinding machine equipped with: - Grinding belt K 40 - With 7 grinding rollers: 20, 28, 32, 41, 48, 60 and 76 mm

Stanje: novo, Bandwidth 100 mm Belt length 2000 mm Belt speed 15/30 m/s Total power requirement 3.0 kW Machine weight approx. 159 kg Space required approx. 768 x 1185 x 1417 mm Combined tube, profile, and belt grinding machine The unique and universal free-standing belt grinder PASOVEC 100 Multi-Function is an invaluable asset wherever constructions are made from tubes and various profiles. The PASOVEC 100 Multi-Function features three workstations: At the rear of the machine, there is a station for standard contact grinding; at the top, a station for surface grinding; and finally, at the front of the machine, an integrated clamping device for tube profiles. This setup allows for precise and clean processing of square tubes, round tubes, and flat steel. Grinding angles are adjustable from 30° to 90° and from 0° to 60°. The machine comes standard with integrated ductwork for extraction connection. Gkodpfx Ajt Hyqgebrjc Technical Data: - Adjustable grinding angles: 30° to 90° (0° to 60°) - Number of speeds: 2-speed - Nominal diameter of extraction nozzle external: 74 mm - Nominal diameter of extraction nozzle internal: 70 mm Included in the price: 1 pc. Table-top belt grinder PASOVEC 100 MULTI-FUNCTION 1 pc. Abrasive belt 100 x 2000 mm grit 36 1 pc. Grinding roller Ø 42.4