Athena Ravne Brusilke Athena 2100X700X800 Mm nakup rabljenega (83.613)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.250 mm, skupna širina: 720 mm, skupna višina: 1.470 mm, trajanje garancije: 12 meseci, vhodna napetost: 400 V, moč: 4 kW (5,44 KM), vhodna frekvenca: 50 Hz, • Izboljšan in nadgrajen model • Robustna konstrukcija, nerjavne jeklene nosilke in palice; • Dimenzije: Š=720 mm, D=1250 mm, V=1470 mm; • Nastavljive noge; • Naprava je analogna giljotini Magurit Fromat 042; • Celoten hidravlični sistem podjetja Hydac. • Električni del podjetja Telemechanics; Pedpfx Amszun E Uefjra • Noži iz Nemčije; • Ojačana konstrukcija nožev; Noži so naslednji: dva zgornja vodoravna, en spodnji vodoravni in tri navpični. • Nalaganje blokov: zamrznjeni mesni bloki se nalagajo v lij, opremljen s pnevmatičnim cilindrom, ki ga dviga za lažje nalaganje. • Po rezanju se izdelki neposredno odlagajo v 200-litrske vozičke. • Naprava je komplet z pnevmatično dvižno napravo za zamrznjene mesne oblike. • Nosilnost do 2 tone • Nalaganje blokov: zamrznjeni mesni bloki se nalagajo v lij, opremljen s pnevmatičnim cilindrom. Po rezanju se neposredno odlagajo v 200-litrske vozičke.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, vhodna napetost: 400 V, moč: 2,2 kW (2,99 KM), vhodna frekvenca: 50 Hz, Mešalnik, prostornina 250 litrov, z osjo in mešalniki Stroj ima 2 povratna motorja z močjo 1,1 kW, skupna moč pa je 2,2 kW. Glavne značilnosti: Podszun A Hspfx Amfsra • Zasnovan za homogeno mešanje živil; • V celoti izdelan iz nerjavečega jekla; • Popolnoma tih proces mešanja; • Dva delovna vijačna mešalnika z mešalniki; • 2 novi sprednji izpustni ventili; • Enostavno čiščenje stroja; • Vgrajena dva tiha motorja najvišjega razreda; • Zaščitni pokrov z omejevalnim stikalom; • Vgrajen električni del. Del tega ima vlažno odporne nadzorne gumbe. • Sistem za povratno mešanje v obeh smereh; • Prostornina: 250 litrov; • Nazivna moč 2,2 kW, 400 V, 50 Hz;

Stanje: zelo dobro (rabljeno), Na prodaj je knjigoveška naprava Karl Tränklein Case Bender, namenjena oblikovanju in ukrivljanju hrbtenic platnic knjig v trdi vezavi. Naprava platnicam doda ustrezen radij, kar zagotavlja popolno prileganje knjižnemu bloku. Stroj je opremljen z nastavljivimi valji, kar omogoča prilagoditev različnim debelinam platnic. Masivna litoželezna konstrukcija zagotavlja visoko natančnost in dolgo življenjsko dobo. Tehnični podatki: Proizvajalec: Karl Tränklein Tip: Case Bender / stroj za oblikovanje hrbtenic Delovna širina: pribl. 600 mm Nastavljiv pritisk valjev Stabilna litoželezna konstrukcija Električni pogon Delovna miza Stanje: rabljeno Uporaba: proizvodnja knjig v trdi vezavi, Prodpfx Amjziwnbjfea knjigoveznice, tiskarne, grafične delavnice, proizvodnja albumov, katalogov in ovitkov.

Stanje: dober (rabljeno), Die block die Matrizen, B x H ca. 3500 x 260 x 190 mm. Pedpfx Amozh D Dyofjra Gesamtlänge: 3500 mm Länge der Reduzierstücke: 2600 mm V-Nut, ohne Reduzierstücke, Öffnungsweite ca. 100 mm V-Nut, mit Reduzierstücke, Öffnungsweite ca. 150 mm, H = 220 mm

Stanje: novo, Tehnični podatki za prečno palico za paletni regal: Sistem regalov: Stow Tip: Pal Rack NS Vsebina dobave: 01x Prečna palica za paletni regal, nova Barva materiala: RAL 2004 oranžna Profil prečne palice: 160 x 50 mm Predpezlhr Aofx Amfea Tip prečne palice: PNB0436 Objemke: 4 HK (kljuke) Razdalja med objemkami: pribl. 3.300 mm maks. obremenitev na par prečnih palic: 4.500 kg pri enakomerno porazdeljeni obremenitvi 02x Varnostni zatiči, rabljeni Izvedba: popolnoma pocinkana Za varovanje vzdolžnih nosilcev pred nenamernim dvigom Vaše kontaktne osebe v našem podjetju: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Morebitni dodatni stroški za dostavo ali pošiljanje tega izdelka bodo zaračunani posebej, pri čemer lahko povprašate o njih glede na kraj dostave oziroma obseg dostave.

Stanje: zelo dobro (rabljeno), Stroj za presejanje in sortiranje sipkih materialov ali drobnih kovinskih elementov. Zelo dobro ohranjen – popoln, z originalnim pogonom, krmilno omaro in kompletom kalibracijskih sit. • Proizvajalec: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Leto izdelave: 1972 • Pogon: motor Bauknecht 0,55 kW, 380/220 V, 2850 vrt/min • Krmilna omara: Carl Kurt Walther GmbH, Wuppertal • Jeklena konstrukcija, stabilen okvir s transportnimi kolesci • Trifazno napajanje 400 V • Komplet presejalnih sit v lesenih okvirjih (številke 1–6) • Velikost mrež sit: od 2 mm do 15 mm • Možnost prilagoditve in zamenjave sit • Glavno stikalo, upravljanje start/stop in zaščita pred preobremenitvijo • Zelo dobro stanje – po demontaži iz obrata, mehansko brezhiben Stroj je pripravljen za delo po osnovnem pregledu. Idealno za: kovinske obrate, livarne, industrijske laboratorije, sortiranje granulata, peska ali drobnih delov. Psdoxmt Eqopfx Amfera

Stanje: zelo dobro (rabljeno), Na prodaju je profesionalni mjerni set japanske tvrtke Mitutoyo, model SBM-25CXST (kat. br. 568-925). Set je namijenjen za precizno mjerenje promjera otvora i cilindričnih elemenata u rasponu od 12 do 25 mm. Sadržaj seta: digitalni unutarnji mikrometar Mitutoyo ABSOLUTE Digimatic s LCD zaslonom, tri mjerne glave: 12–16 mm, 16–20 mm, 20–25 mm, podešavajući prsteni: Mitutoyo 19,997 mm i HK66 19,001 mm, produžeci i dodatna oprema, originalna drvena kutija Mitutoyo s prilagođenom pjenom. ABSOLUTE sustav jamči stabilna mjerenja bez potrebe za ponovnim postavljanjem nule pri svakom uključivanju. Digitalno očitanje omogućuje brza i pouzdana mjerenja visoke točnosti. Set je u vrlo dobrom stanju, kompletan i spreman za rad. Idealan je za mjeriteljske laboratorije, odjele kontrole kvalitete i alatničke radionice. Prsdpfx Amow R E Hvsfja

Stanje: dober (rabljeno), Koda: 0583 Znamka: RAVNE Model: 3700 Integralni jekleni nož (rezilo) za furnirno giljotino, dolžina 3600 mm Dolžina: 3700 mm Višina: 110 mm Predpfx Amsd Im I Rsfsa Debelina: 12 mm

Stanje: dober (rabljeno), Vsebina paketa vključuje: 1x globoki okvir, rabljen Barva materiala: pocinkano jeklo (Sendzimir) Skupna dolžina: približno 1.250 mm za globino police: 1.200 mm razdalja med oporniki: približno 1.100 mm podpora za prečke: približno 50 mm kot podpore: L: približno 80 x 80 mm skupna širina: približno 860 mm notranja širina: približno 855 mm debelina materiala: približno 3 mm Bočni okvir: dolžina: približno 1.245 - 1.070 mm spredaj se poševno zožuje širina: približno 200 mm višina: približno 195 mm Končni omejevalnik: širina: približno 200 mm višina: približno 195 mm Vaše kontaktne osebe v našem podjetju: gospod: Andre Evering gospod: Mario Klöver Pjdpfx Asr Dr Susmfsra gospod: Falk Deutsch Splošne informacije o izdelku: Izdelek je rabljen, zato so lahko prisotne praske, udrtine in znaki uporabe. Ta izdelek je na voljo samo za osebni prevzem. Dodatni stroški transporta ali pošiljanja tega izdelka bodo zaračunani ločeno. Cene se razlikujejo glede na kraj dostave ali vsebino paketa, zato nas kontaktirajte za podrobne informacije.

Stanje: zelo dobro (rabljeno), Wedge bar chuck (28319) Diameter: 290 mm Mounting: cylindrical, 78 mm Podpfxeiuvume Amfera Thread pitch: 6 mm Weight: 54 kg

Stanje: zelo dobro (rabljeno), Faceplate Diameter: 390 mm Prodpfx Aofm Tqzomfsa Clamping system: KKG 6 Pitch circle diameter: 135 mm Weight: 56 kg

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Faceplate diameter 400 mm cone 105 mm bolt circle 135 mm Prodpfx Amed Tyu Rofea estimated age

Stanje: dober (rabljeno), Faceplate diameter 500 mm Podpecx N Atefx Amfsra 475 rpm

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Lathe chuck Diameter: 330 mm Height: 100 mm Weight: 57 kg Prsdpfxod Na Spj Amfja Year of manufacture estimated

Stanje: rabljeno, Clamping cube 2 units available 1230 x 1230 mm Prjdsc Rmpuspfx Amfea Height: 560 mm Hole spacing: 60 mm

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Faceplate 24830 Diameter: 500 mm Height: 115 mm Podpfx Aod Tyu Ejmfsra Taper: 120 mm Estimated age

Stanje: zelo dobro (rabljeno), Face plate Diameter: 500 mm Weight: 68 kg Bolt circle spacing: 134 mm Predpfx Ajfm Tqrsmfea Pilot diameter: 96 mm

Stanje: zelo dobro (rabljeno), Professional BERNARDO BS-1 dividing table / indexing head equipped with a high-quality BISON Ø160 mm lathe chuck. The set is intended for milling machines and precise mechanical machining requiring angular division and indexing of workpieces. Technical data: • Indexing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck rotational speed: 3000 rpm • Precise angular scale • Indexing plate with hand crank • Robust cast iron construction • Capable of highly accurate angular divisions Applications: • Polygonal milling Prjdpsza Hidsfx Amfoa • Gear cutting • Machining shafts and rotary components • Drilling holes at a specified angle • Toolroom and production operations Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck runs smoothly and clamps workpieces securely • Scales and indexing mechanism are legible and fully functional Set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The exact item shown in the photos is being offered for sale.

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: 46.60, Workpiece length: 310 mm Workpiece width: 150 mm Predpfx Amscxxlrofja Workpiece height: 210 mm Maximum spindle speed: 2,800 rpm Distance grinding wheel - table: 280 mm Magnetic chuck, permanent magnet: 300 x 150 x 70 mm Spindle overhang: 250 mm Column diameter: 130 mm Total power requirement: 1.9 kW Machine weight approx.: 0.58 t Space requirement approx.: 0.62 x 0.72 x 1.80 m

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Prsdpomhhypofx Amfsa Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) Pjdpfjmhh Dhsx Amfera - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. Podpfomhh Dzsx Amfera The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. Pedpfsmhhx Ijx Amfera When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. Prsdpfjmhhyaox Amfoa The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Pedpfxomhh Ane Amfsra Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.