Širokopasovne brusilke z delovno širino 1300–1499 mm nakup rabljenega (124)

Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, višina brušenja: 150 mm, delovna višina: 150 mm, vrsta nastavitve višine: električni, višina obdelovanca (maks.): 150 mm, - Very good condition - Year of manufacture: 1993 - Electronic PLC control by Heesemann - Model / Type: LSM 6 TECHNICAL SPECIFICATIONS: - Working sanding width: 1350 mm - Max. thickness of sanded elements: 150 mm MACHINE CONFIGURATION: I – Cross sanding unit with electronic sequential pressure shoe - Main motor: 13 kW - Pneumatic photocell-controlled oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 5480 x 150 mm II – Combination unit with pad - Main motor: 13 kW - Belt cleaning system with oscillation - Pneumatic pressure pad - Pneumatic photocell-controlled oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTOCELL OSCILLATION - Pneumatic cleaning bar system with belt oscillation III – Combination unit with pad - Main motor: 13 kW - Sanding belt cleaning system - Pneumatic pressure pad - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV – Cleaning brush unit following the main unit, at outfeed - Motor: 1.1 kW - Extraction outlet: 1 x 140 mm - Feed by variable speed gear motor: 4 kW - Feed speed: 6–26 m/min - Airflow requirement: approx. 28 m/sec, 4340 m³/h - Compressed air consumption: approx. 800 l/min Gjdpjw H Sk Tjfx Ab Tjkf - Feed belt: 5-segment - Pneumatic cleaning system for feed belt - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Suitable for lacquer and intermediate lacquer sanding - Dimensions (L/W/H): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 – 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 15.0 with inverter Feed speed variable m/min: 3.5 – 18 Working units: 1st unit: "RA" diagonally grooved steel contact roller, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments C version: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller/pad unit - Sector activation via electronic control, synchronizing engagement with the feed speed and regulating the number of segments based on workpiece geometry, enabling selection of more or fewer sectors on the left and right sides of the workpiece. - Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing bar at the infeed Additional features: Gkodpfx Abshtuvre Tef Roller table in infeed and outfeed for long workpieces Perforated table and feed belt Vacuum table with integrated 4 kW (5.5 HP) electric fan in the machine frame Oscillating blow-off device 2nd unit Touch screen 10.4” display with ‘eye S software integration’ ATTENTION: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.350 mm, skupna masa: 10.000 kg, vhodni tok: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Gkodjxp Hvnepfx Ab Tjf Machine base Feed conveyor unit with single transport belt, feed speed adjustable from 3 – 15 m/min via frequency inverter, including belt cleaning device. Constant working height: 920 mm. Electronic adjustment of the upper machine section for workpiece thicknesses from 3 to 80 mm. Toothed belt lifting gear with dust protection cover; drive control via integrated control cabinet. 1. Cross sanding unit Belt dimensions: 5,400 x 150 mm Drive power: 13/17 kW Sanding belt equipped with additional cleaning/blasting tube, wear-resistant brake, segmented pressure belt system, intermittent belt cleaning/blasting, belt tracking control; inspection door with glass insert. 2. Longitudinal sanding unit Belt dimensions: 2,620 x 1,350 mm Drive power: 13/17 kW Sanding belt with double blasting holes for enhanced belt cleaning, wear-resistant brake, automatic belt length compensation, sanding action against feed direction, intermittent belt cleaning/blasting, infrared belt control. Eccentric bearing on front (steel) roller for light calibration, controlled via operator terminal. 3. Longitudinal sanding unit Belt dimensions: 2,620 x 1,350 mm Belt speed: 0.5 – 18 m/s Drive power: 17 kW (frequency inverter) Infinitely variable sanding belt speed, double blasting holes for advanced belt cleaning, wear-resistant brake, automatic belt length compensation, reverse sanding direction, intermittent belt cleaning/blasting, infrared belt control. 4. Brush Roller Unit Centrally height-adjustable, includes extraction hood and pressure roller. Diameter: 150 mm Drive power: 1.5 kW Bristle: Fibre 5. Workpiece Suction Device For secure feeding of parts shorter than 500 mm, including integrated blower. Electrical connection: 400 V, 50 Hz Belt change: Left Operator terminal: Left 6. Top-mounted ionization bar Discharges static electricity, including high-voltage transformer. 7. Integrated workpiece cleaning device with rotating compressed air nozzles The machine will be operational upon delivery, following full mechanical and electrical refurbishment by authorized Heesemann service. New conveyor belt installed. On-site commissioning and initial operator training available by arrangement. Transport costs negotiable – loading included in the price. For further details or questions, please contact: Paweł Szczepański +48 795 517 258

Stanje: rabljeno, Working width: 1350 mm Number of sanding units: 2 pcs. Maximum workpiece thickness: 160 mm Sanding belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT: ROLLER 2ND BELT: COMBINATION UNIT (ROLLER/PAD) SUITABLE FOR SOLID WOOD, VENEER, AND INTERMEDIATE COATING SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 x 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Continuously adjustable feed conveyor with variable speed: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION: ECO GEAR PATENT SYSTEM - 1 PC. DRUM BRAKE for belt stop - Swiveling ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP STRIP at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER CONVEYORS, each with 2 rollers at infeed and outfeed - AUTOMATIC CENTRING OF FEED CONVEYOR - 1 EXTRACTION CONNECTION, 160 mm diameter - AUTOMATIC TABLE POSITIONING Gkjdpfx Abormucxe Tjf IMPORTANT: New patented belt oscillation system 1. No valves 2. No photo sensors 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt tracking issues! - Unitek steel calibrating roller (same for all models) - Unitek flexible pressure shoe before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set, 6 positions (per pc., same for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width: 1350 mm) - Unitek belt motor upgrade to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor: 14.7 kW (for Excel 2-belt only) - Unitek automatic table lowering in case of emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed or outfeed conveyor with 4 rollers (same for all models) - Price per roller conveyor - Unitek electronic control of machine functions with 12'' touchscreen (same for all models) Automatic workpiece sensing with feed motor control ----- Machine price for the above configuration on request! ----- Optional items at extra cost: Surcharge for 3-belt machine (roller-roller-pad, Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and user training: EUR 1,300.00 ----- All prices are net plus 19% statutory VAT. ----- (Technical data according to manufacturer's information – no liability assumed!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, I am selling a COSTA S CCTT 1350 wide belt sander, year of manufacture 2004. Gkedpfjvxd Ttjx Ab Tjf Configuration: - 1 pcs. hard rubber sanding drum - 1 pcs. soft rubber sanding drum - 1 pcs. electronic segmented pad - 1 pcs. electronic segmented pad - Cleaning unit combined (brush + air blast) at the rear - Working width: 1350 mm - Pressure steel guides for short workpieces - Compressed air cleaning for all units - Vacuum hold-down table with integrated fan Line configuration with fixed working height and moving sanding units. Total power of 4 motors: 96 kW Condition: very good! Available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Working width: 1300 mm Workpiece height - max.: 3 - 140 mm Control system: Xinje XD5 Partial bevel length - min./max.: 200 - mm Total power requirement: 13.4 kW Machine weight: approx. 4.5 t Space requirement: approx. 5.1 x 2 x 2.3 m This brush sanding machine is in very good condition, available immediately, and can be inspected under power at the location of the seller. DESCRIPTION: - Minimum workpiece length: 200 mm - The machine is designed for sanding flat individual parts such as kitchen cabinets, windows, doors, furniture, etc. - Modular control of each unit to meet specific customer requirements. - Frequency converters for speed control of the respective module motors. - Each unit can be easily pulled out for servicing and changing sanding paper and brushes. - Automatic adjustment of the working height range from 3-140 mm via the control system. - Oscillating air blower at the exit area. Gkodpsxcg Hmefx Ab Tjf Other features: - Ball bearings, drive belts, and chains for the brush drives were replaced in June 2025.

Stanje: rabljeno, Leto izdelave: 2007, Bütfering SCO 313 QEH 1. Jednotka pro příčné broušení „Q“ Šířka segmentu: 25 mm Typ jednotky: příčná brusná jednotka s elektronickým přítlačným nosníkem Přítlačný element: systém CPS 2 s variabilním tlakem pro broušení i hrany Výkon agregátu: 13,5 kW Rychlost pásu: 1–16 m/s Rozměr pásu: 5360 x 150 mm Ofuk pásu 2. Agregát s elektronickým přítlačným nosníkem „E“ Šířka segmentu: 25 mm Typ jednotky: jednotka s elektronickým přítlačným nosníkem Přítlačný element: systém CPS 2 s variabilním tlakem pro broušení i hrany Výkon agregátu: 7,5 kW Rychlost pásu: 2–18 m/s Rozměr pásu: 2620 x 1350 mm Ofuk pásu 3. Agregát s tlakovým lamelovým pásem „H“ Šířka segmentu: 25 mm Typ jednotky: jednotka s elektronickým přítlačným nosníkem a vnitřním lamelovým pásem Přítlačný element: systém CPS 2 s variabilním tlakem pro broušení i hrany Výkon agregátu: 20 kW Rychlost pásu: 1,5–12 m/s Gkodpfx Abew Sh Apj Tsf Rozměr pásu: 2620 x 1350 mm Ofuk pásu Rok výroby: 2007 Cena: 17.500,-

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.380 mm, skupna širina: 2.000 mm, skupna višina: 2.500 mm, skupna dolžina: 6.000 mm, delovna širina: 1.380 mm, širina brušenja: 160 mm, skupna masa: 2.000 kg, Dvosmerni kalibracijski stroj (zgoraj in spodaj) Costa, največja delovna širina 1380 mm in višina med 3 in 160 mm. = CENA 65.000 evrov Gkedpfx Aboxgcr Hs Tof

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, skupna dolžina: 4.400 mm, delovna širina: 1.400 mm, vrsta nastavitve višine: električni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Good day, We are offering for sale a Heesemann LSM 8 wide belt sander configured with four sanding units: - Cross-belt unit - Longitudinal unit with calibration roller - Longitudinal unit with reverse function - Longitudinal unit with cleaning brush The machine has undergone mechanical refurbishment and inspection, is tested, calibrated, and ready for operation. Year of manufacture: 1997 Feed speed: 5–25 m/min, infinitely variable adjustment from the control panel Working height: 880 mm Workpiece thickness: 3–80 mm Power requirement: 107 kW – under full load Total weight: 10,250 kg Control: physical button panel with display Control and abrasive belt change side: right Single perforated conveyor belts, perforated table with channel and vacuum fan for secure transport of short workpieces. Workpiece hold-down: rubber rollers, diameter 70 mm. Abrasive belt Q unit: 5400 mm x 150 mm Motor power: 13/17 kW – two-speed motor – belt speed: 12 m/s / 24 m/s "Sergeant" belt: 4850 mm x 141 mm Longitudinal belts L unit: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW – two-speed motors – 10 m/s / 20 m/s Hold-down system: Pressurizing beams with computer-controlled, selective pressure adjustment – CSD® system with smooth, individual pressure adaptation for multi-row loading. Distance between control reading rollers: 16 mm. Abrasive belts are equipped with a cleaning system – compressed air blow-off and dust extraction. Tolerance alignment of workpieces up to 2 mm by maintenance-free electromagnetic pressure pads. Working width, as well as start and end of sanding beam, are electronically controlled. Abrasive belt cleaning by blow tubes, dust extraction via integrated extraction ducts, blow-off activation is automatic upon workpiece detection in the machine. At the end, a 150 mm cleaning/de-dusting brush with extraction duct for dust removal. Additional blow-off rotors at the machine outfeed with extraction duct. Gkedpfx Asu Hlzfob Tef Commissioning at the new site and basic operator training – negotiable. Price negotiable upon request. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Calibrating and Sanding Machine DMC Topsand 2000 4 Belts First Unit: 1 Roller Second Unit: 1 Roller Third Unit: 1 electronically segmented pad Fourth Unit: 1 electronically segmented super-finishing pad Working width: 1350 mm Gksdpfx Abji Dakro Tsf Vacuum conveyor system

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Prodajam širokopasovni brusilni stroj COSTA 71 CTT 1350, letnik 1997. Konfiguracija: 1 kos brusilni valj iz trde gume 2 kosa elektronska segmentna čevlja Enota za čiščenje kombinirana krtača + pihanje zadaj Delovna širina: 1350 mm Jekleni tlačni vodila za kratke elemente Čiščenje s stisnjenim zrakom za vse enote Vakuumska miza s integriranim ventilatorjem Konstrukcija za linijo, s stabilno delovno višino in gibljivimi agregati 3 motorji s skupno močjo 55 kW Stanje: zelo dobro! Na voljo takoj. Gksdpfxjxlk Rbe Ab Tef

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 650 mm, Oprema: Na voljo je tipska ploščica, Kündig Botop, sanding unit above: roller, pneumatically-operated pad; sanding unit below: roller, pneumatically-operated pad. The machine has been completely overhauled: new conveyor belt and new rollers. Godpfevmt D Rox Ab Tjkf

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: nepreverjeno, SANDING LINE CONSISTING OF 3 MACHINES: LOWER UNIT WITH TWO PAD BELTS; UPPER UNIT WITH TWO PAD BELTS; SIDE UNIT WITH ONE BELT AND TWO BELT EDGE SANDERS; SUITABLE FOR BEAMS UP TO 800x300 mm INCLUDING INFEED AND OUTFEED ROLLER CONVEYORS Gsdpfx Abow E Eu Re Tokf TOTAL POWER: 34 kW

Stanje: rabljeno, Leto izdelave: 2005, številka stroja/vozila: 0411490843, with new feed belt Technical data: - Manufacturer: Bütfering - Model: Optimat SCO 113/C/DIA Gksdpfx Abou U Ry Hs Tof - Year of manufacture: 2005 - Sanding belt width: 1370 mm - Sanding belt length: 2150 mm - Weight: 2,600 kg - Extraction volume: approx. 3,530 m³/h - Extraction ports: 1 x Ø 180 mm (sanding unit) 1 x Ø 140 mm (finishing brush) 1 x Ø 100 mm (suction fan) - Combined sanding unit with switchable sanding roller and pad - Automatically adjustable, profiled steel contact roller with grain compensation for calibration - Electronically controlled pressure beam with lacquer sanding package - Continuously variable, frequency-controlled sanding belt speed 2 - 18 m/s - Vacuum clamping system, fan integrated in the machine frame - Main drive motor: 15 kW - Total connected load: approx. 19 kW - Operating voltage: 400 V / 50 Hz Dimensions: - Length: 1,620 mm - Width: 2,050 mm - Height: 2,180 mm - Location: In stock

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.300 mm, skupna masa: 4.000 kg, delovna višina: 1.000 mm, vrsta nastavitve višine: električni, transportna višina: 1.000 mm, Kalibrirni stroj / Širokopasovni brusilni stroj Proizvajalec: Costa Tip: 71 CCT 1350 Delovna širina: 1300 mm Opremljen z: 1x kalibrirni valj (trda guma pribl. 80 Shore), 22 kW, mere brusnega traku 1380 x 2620 mm 1x kalibrirni valj – na novo gumiran (trda guma 60 Shore), 18,5 kW, mere brusnega traku 1380 x 2620 mm 1x brusilni čevelj, 15 kW 1x čistilna krtača 1x izpihovalna enota Regulacija podajalne hitrosti, 4 - 24 m/min. Gsdpfx Aexl N Thob Tekf Transportni trak z vakuumom Vakumski ventilator z dušilcem zvoka Delovna višina: 1000 mm Nastavitev višine zgornjega dela stroja (enostavna integracija v obstoječo strojno linijo) Priključek: 380 V 50 Hz, 200 A Skupna priključna moč pribl. 65 kW Dimenzije pribl. 3000 x 2500 x 2400 mm (DxŠxV) Teža pribl. 4000 kg

Stanje: zelo dobro (rabljeno), COSTA LEVIGATRICI Series S model SN with 5 units - First unit: electronically segmented transverse belt Gkedpfxjr Iyvmj Ab Tsf - Second unit: 1 roller - Third unit: 1 roller - Fourth unit: electronically segmented super-finishing pad - Fifth unit: electronically segmented transverse belt Working width: 1350 mm Vacuum system Inverter on all belt units Inverter on feed conveyor Outfeed brush unit Outfeed blower unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Stroj je bil v uporabi do zaprtja podjetja pred približno 12 meseci. 2 brusna trakova + krtača Gsdpfew E Dzisx Ab Tekf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SA005556, skupna širina: 1.350 mm, skupna masa: 4.000 kg, dolžina brusnega traku: 2.620 mm, višina obdelovanca (maks.): 170 mm, priključek za stisnjen zrak: 6,5 letvica, širina mize: 1.350 mm, vhodna frekvenca: 50 Hz, vhodni tok: 130 A, širina obdelovanca (maks.): 1.320 mm, The grinder has undergone a complete service inspection and the conveyor belt has been replaced. Gkodovk Tmajpfx Ab Tof

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1990, WEBER OFZ-2-1350 wide belt sander working width: 1350 mm number of units: 2 1: calibrating roller with 18.5 kW motor 2: sanding pad unit with 11 kW motor adjustable sanding pad Gkodogm Tqwspfx Ab Tof cleaning brush variable feed speed machine weight: 2700 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, moč: 44,7 kW (60,78 KM), Tehnični podatki: Obratovalna višina: 900 mm Obratovalna širina: 1350 mm Maks. debelina obdelovanca: 99 mm Min. debelina obdelovanca: 0,8 mm Dimenzije stroja: Gkjdpfxewnw E Tj Ab Tjf Teža: cca 4800 kg Širina: cca 2800 mm Dolžina: cca 3460 mm Višina: cca 2440 mm Stroj smo kupili leta 2020 in ga obnovili. Priložen je nov transportni trak.

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Specification and technical data: The Master delivers precision sanding. It encapsulates the essence of our 75 years’ experience in sanding technology. This means it comes equipped "out of the box" with all the features essential for fast, reliable production of perfect surfaces—nothing more, nothing less. The core model Kündig Master is fitted with a calibration roller and a sanding pad unit, based on a proven design that guarantees long-term maintenance of high sanding precision—even across its generous working width of 1350 mm. In addition, a control unit is integrated for fast and intuitive operation. Sanding units – Proven combination The sanding system relies on a tried-and-tested combination of calibration roller and sanding pad. For optimal workpiece guidance, a parallel-sprung steel pressure roller is fitted at the machine infeed, with rubber pressure rollers placed between the sanding units. Calibration Unit (R): The calibration unit consists of a grooved rubber contact roller of proven hardness. It is ideal for calibration tasks, even for higher material removal rates if required. The contact roller level is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Gsdpfsw Naanjx Ab Tekf Segmented sanding pad (E): Equipped with the E-Plus configuration, the fine sanding unit features—not pneumatically, but—an electronically controlled, segmented sanding pad with a scanning width of 35 mm. This enables even more precise fine sanding at the edges of workpieces. The edge pressure of the sanding segments is automatically regulated, but can also be precisely adjusted via the touchscreen to further refine the finish around the workpiece edges. Changing the graphite glide belt is also quick and easy. Equipment – At a glance Construction: In terms of robustness and durability, the Master is on par with our other model ranges. It benefits from the same solid construction that makes all of our machines long-term investments, and is designed to deliver precise sanding results for many years. Upper section adjustment: For over thirty years, we have equipped our machines exclusively with upper section adjustment. Why? Although it is more complex to engineer than table adjustment, it offers numerous advantages: Greater permissible workpiece weights, better long-term precision, and the consistent working height. Workpiece dimensions: Adjustment of the upper section (clearance opening) is motorized and finely regulated via touchscreen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, well-established standard dimension.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.350 mm, širina brušenja: 1.350 mm, višina brušenja: 160 mm, 1. Aggregat-Walze zum Kalibrieren Gedpfxowhqmws Ab Tokf 2. Aggregat mit Elektronikschuh 3. Aggregat mit Elektronikschuh Stabile Industriemaschine zum Kalibrieren, Feinschleifen und Lackschliff

Stanje: dober (rabljeno), delovna širina: 1.350 mm, HESEEMANN LSM8 Gedpjxcg Scjfx Ab Tjkf

Leto izdelave: 2008, Stanje: zelo dobro (rabljeno), I am selling a heavy-duty wide belt sander SGJ 1300R-RP. Year of manufacture: 2008 Configuration: Steel roller / 37 kW motor Rubber sanding roller + pad / 22 kW motor Cleaning unit with extraction hood Feed speed adjustable Pressure shoes for short workpieces on each unit Infeed and outfeed tables for long workpieces Working height: 3–150 mm Gedpfskd Am Esx Ab Tekf Working width: 1300 mm Total power: 64 kW Total weight: 4000 kg Condition: very good! Available immediately.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, HOMAG Sandteq w-300 Tehnični podatki: - Hitrost pomika traku: 2,5 - 13 m/min - Delovna višina: 900 mm - Delovna širina: 1350 mm - Število obdelovalnih enot: 2 - Debelina obdelovanca: 3 - 160 mm z avtomatskim merjenjem - Dimenzije stroja D x Š x V: pribl. 2115 x 2100 x 2415 mm - Teža stroja: pribl. 4000 kg - Skupna električna moč: pribl. 39 kW - Priporočena predhodna zaščita: 80 A Gsdpfexczmzox Ab Tjkf - Vakuumska miza - Q = prečna brusilna enota s Poly V-jermenom / 13,5 kW (2-16 m/s) - X = kombinirana enota s kontaktno valjčko in sistemom pritisnega nosilca / 18,5 kW (2-18 m/s) - Super-finish funkcija: kalibriranje, vmesno brušenje furnirja & laka, fino brušenje furnirja & laka - Krtačna enota - Čistilni rotor z ionizacijo - Powercontrol s Powertouch Stroj je takoj na voljo. Nakladanje na tovornjak je možno.