Širokopasovne brusilke z delovno širino 1300–1499 mm nakup rabljenega (124)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 26476, delovna širina: 1.350 mm, širina brušenja: 1.350 mm, skupna masa: 7.500 kg, višina brušenja: 200 mm, vrsta nastavitve višine: električni, dolžina brusnega traku: 2.000 mm, višina obdelovanca (maks.): 200 mm, širina brusilnega traku: 1.350 mm, moč pogonskega motorja podajalnika: 2.200 W, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, širina obdelovanca (maks.): 1.350 mm, Five-belt calibration and fine sanding machine, sanding from above and below for solid wood or wood-based panels. Factory overhauled to current standards. Gkjdpfxovy Dt Nj Ab Tsf 5 sanding units (2x calibration rollers above/below, cross sanding unit, 2x segmented sanding pads—of which 1 includes the unique diagonal sanding unit featuring patented KÜNDIG Brilliant technology), as well as the KÜNDIG Enormatic control system for automatic workpiece feed. Machine fully refurbished—see attachment for further information.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, številka stroja/vozila: 0-256-23-1012, Read operating hours: 361.69 h Working width: 1350 mm Wide belt sanding belt width: 1350-1380 mm Wide belt sanding belt width H/X: 1370 mm Cross belt sanding belt width: 150 mm Belt change side: left Working height: 900 mm Workpiece thickness: 3-160 mm Feed speed: 2.5 – 13 m/min Workpiece detection: High-precision workpiece detection at 12.5 mm pitch; multiple feeding of complex part shapes Units: 1. Cross unit (1350 mm) (T3/5), Infinitely variable, frequency-regulated cutting speed 2-16 m/s, MPS 2.0 Plus (1350 mm) electro-magnetic segmented pressure beam Drive motor 13.5 kW 2. X unit (1350 mm) (T3/5) with internally running lamella belt and steel contact roller to accommodate a segmented pressure beam with three selectable modes: - Calibration sanding with profiled contact roller - Veneer and lacquer sanding without lamella belt - Veneer and lacquer sanding with lamella belt Infinitely variable, frequency-regulated cutting speed 2-18 m/s, MPS 2.0 Plus (1350 mm) electro-magnetic segmented pressure beam Drive motor 18.5 kW 3. U unit (1350 mm) (T3/S/7/9): Universal unit for mounting round brushes on interchangeable frames and disc brush cassettes. Terminal-controlled adjustment of brush feed and thus immersion depth Infinitely variable, frequency-regulated brush oscillation 36-240 strokes/min, can be switched on/off Rotation direction with or against feed Drive motor 15 kW Cutting speed 130 – 1000 2 trolleys for easier changing of brush units on interchangeable frames (service trolley for U unit) 1 structuring brush, diameter 300 mm 1 satin finishing brush, diameter 300 mm 4. Brush unit with structuring brush Drive motor 5.5 kW Gedov T Nnfspfx Ab Tjkf Brush filling: Anderlon K 80 Diameter 150 mm Integrated cleaning system: Ionization device with 16 rotating nozzles, with extraction nozzle Sanding belt dimensions: 1370 x 2150 mm Vacuum clamping device: 5.5 kW, vacuum blower integrated in machine Machine control: Terminal touch screen Additional: 2 x roller conveyors each L=3000 mm, W=1300 mm Misc. sanding belts P24-P100 (approx. 50 pcs); extraction piping; mobile sanding belt holder (6 arms) Operating voltage: 400 V, 50 Hz Required space L x W x H: 2566 mm x 2100 mm x 2415 mm Weight: 5500 kg Machine dimensions: 2600 x 2030 x 2000 mm Location: 32683 Barntrup

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.000 mm, skupna višina: 2.070 mm, skupna dolžina: 1.800 mm, širina brušenja: 1.350 mm, moč: 11 kW (14,96 KM), dolžina brusnega traku: 2.150 mm, širina brusilnega traku: 1.370 mm, premer ekstrakcijske šobe: 200 mm, moč pogonskega motorja podajalnika: 800 W, vhodna napetost: 400 V, Slight signs of use from demonstration present. The LIBRA 45 is distinguished by its extensive standard equipment, a very robust construction (both the base frame and working units), sanding shoes with a larger contact surface, and modern control systems. - Motorized table height adjustment - Digital display for working height Gkodpevxu E Hefx Ab Tjf - Electronically controlled sanding belt oscillation with reduced compressed air consumption - Automatic star-delta start - Natural rubber feed belt with negative profile - Automatic belt centering - Support table with rollers at the infeed and outfeed of the feed belt - Large sanding roller diameter Ø 140 mm - Belt feed via geared motor with two speeds - Flexible steel pressure rail in front of the first unit - Rubber pressure rollers before and after each working unit - Pneumatic belt tensioning for each unit with decimal correction option for grit/belt thickness Equipment: - Working table height adjustment with electronic display for working height - Oscillation of sanding belts with electronic system - Rubber-coated, grooved pressure roller at infeed 1st position with backflow lock (C.E.) - Star-delta start of main motors - Grooved calibration steel roller - Selector switch for positioning the sanding shoe from the control panel Extraction connection Extraction port diameter 2 x 200 mm Electrical data Height adjustment motor power 0.25 kW Feed motor power 0.8 kW Drive motor power 11 kW Connection voltage 400 V Mains frequency 50 Hz Sanding unit Sanding belt length 2150 mm Sanding belt width 1370 mm Max. sanding width 1350 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. height 4 mm Max. height 170 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, I am selling a COSTA K CCC 1350 wide belt sander, year of manufacture 2004. Configuration: - 55 kW steel calibration roller - 45 kW hard rubber sanding roller Gksdpfxjt Rn E Te Ab Tof - 37 kW soft rubber sanding roller - Cleaning unit: combination brush + blower at the rear - Working width: 1350 mm - Pressure steel guides for short components - Compressed air cleaning for all units 3 motors: 55 + 45 + 37 kW Including complete documentation. Condition: very good! Available immediately.

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside of our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Features and technical data: • Intermediate lacquer sanding (Cd-L) version • Robust, space-saving single-wide belt sander designed for demanding calibration and final sanding • Constant working height ensured by upper section adjustment • Working width: 1350 mm • Overhead sanding with combination unit • Complete sanding unit tiltable up to 10° • Grooved rubber contact roller with proven hardness • Infinitely adjustable contact roller height with abrasive grit scale • Pneumatic lifting/lowering of the contact roller based on aggregate selection • Sanding pad with quick-change sliding coating Gjdpfx Abekwhxij Tskf • Parallel spring-loaded, ground steel pressure roller at infeed • Rubber-coated pressure roller at outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz; soft start for low current draw on startup • Motorized, finely adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatic; compressed air consumption approx. 2 l/min • Optimum safety with automatic emergency stop via disc brake in the event of belt breakage, belt misalignment, loss of pressure, or opening of belt entry door • Workpiece feed motor 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum unit for work table with small parts area, integrated fan in machine base • Complete electrical system with contactor control; automatic star-delta starting of main motor, motor protection and ammeter for monitoring material removal • Maximum workpiece height: 200 mm • Belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the entire working width • Workpiece over-thickness protection with feed emergency stop and automatic lifting of main unit • Stepless adjustment of material removal rate • Electronic feed control at operator panel, stepless 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory function (results saved with button press based on sanding result, no manual input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: fully automatic quick setting and feed initiation (very useful for large workpieces) • eco*-energy saving mode • Fault diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (special pivoting version) - Variable sanding belt speed (programmable memory) - Air nozzles for sanding belt cleaning, operationally controlled, additional extraction port - Additional sanding shoe insert for lacquer sanding Includes swiveling air knife Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2015, With sanding unit consisting of: - 1 combination unit, pneumatically controlled sanding pad for steel veneer sanding - Dust brush Vacuum carpet and vacuum equipment prepared Roller table at infeed 200 mm Roller table at outfeed 1000 mm Constant table – consistent infeed height automatic workpiece thickness adjustment/sensing Machine control via touch screen Used, top condition Manufacturer: Bütfering Model: SWT 215 / L Optimat Year of manufacture: 2015 Machine no.: Working width approx. 1350 mm Pass-through height approx. 3–160 mm CE type-tested Belt dimensions approx. 1370 mm x 2150 mm (long belts) Feed speed steplessly adjustable 2.5–13 m/min 1 combination unit 15 kW with profiled steel roller D 160 Diameter 160 mm Pneumatically controlled air pad Space required approx. 1625 mm x 2000 mm x 2300 mm Weight approx. 1500 kg Total connected load approx. 16 kW Location: 97447 Gerolzhofen, ex stock, loaded free on truck, unpacked Gkodpfx Aowa Ulusb Tsf Sold as seen, in current condition, without warranty or liability

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4607269, skupna širina: 2.100 mm, skupna višina: 2.400 mm, skupna dolžina: 2.830 mm, delovna širina: 1.350 mm, širina brušenja: 1.350 mm, skupna masa: 2.850 kg, višina brušenja: 160 mm, moč: 22 kW (29,91 KM), vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, hitrost transportnega traku: 20.500 mm/s, dolžina brusnega traku: 2.620 mm, višina obdelovanca (maks.): 160 mm, višina prehoda: 160 mm, priključek za stisnjen zrak: 6 letvica, širina brusilnega traku: 1.380 mm, nastavitev višine mize: 157 mm, moč pogonskega motorja podajalnika: 1.500 W, vhodna frekvenca: 50 Hz, potreba po zraku: 1 m³/h, vhodna napetost: 400 V, obratovalni tlak: 6 letvica, širina obdelovanca (maks.): 1.350 mm, 🪵 2002 Viet Challenge 223 Mehrband-Schleifmaschine – Schwerlast-Finishing, Sehr Guter Zustand Bringen Sie Ihre Holzoberflächenbearbeitung auf das nächste Level mit dieser Viet Challenge 223 Mehrband-Schleifmaschine von 2002 – die Hochleistungs-Schleiflösung für professionelle Holzbearbeitung. In Italien gebaut für Präzision und Langlebigkeit, ist die Viet Challenge 223 bei Schreinern, Tischlern und Produktionsbetrieben europaweit geschätzt. Jetzt in sehr gutem Zustand verfügbar, liefert diese Doppelschleifkopfmaschine konstant exzellente Ergebnisse auf Massivholz, furnierten Platten und Verbundwerkstoffen – ideal sowohl für Kalibrierung als auch Feinschliff. ✅ Hauptmerkmale – Viet Challenge 223/20 Baujahr: 2002 Zustand: Sehr gut – sauber, gepflegt, voll funktionsfähig Schleifaggregate: 2 (Vorschliff + Feinschliff) Arbeitsbreite: 1.350 mm Arbeitshöhe: 3 – 160 mm Mindest-Werkstücklänge: ca. 400 mm Schleifbandmaße: 1.380 mm x 2.620 mm Hauptmotorleistung: 11 kW + 11 kW (ca.) Vorschubgeschwindigkeit: stufenlos, 3,7 bis 20,5 m/min Elektrische Höhenverstellung Not-Aus und Sicherheitsvorrichtungen Vorschubmotor: 1,5 kW Hubmotor: 0,37 kW Absauggeschwindigkeit: 25 m/s Druckluft: 6 bar Luftverbrauch: 17 l/min Maschinenabmessungen: 2.830 x 2.100 x 2.400 mm Maschinengewicht: 2.850 kg 🧱 Ideal Für: Kalibrierung von Massivholzplatten Schleifen von furnierten Platten Finish von MDF und Verbundplatten Bauteile für Flachmöbel Allgemeine Holzoberflächenbearbeitung und -veredelung 📦 Lieferumfang: Viet Challenge 223 Hauptschleifmaschine Zwei Schleifaggregate für Vorschliff und Feinschliff Integrierter Vorschubtisch und Absaugstutzen Original-Bedienungsanleitung und Schutzvorrichtungen Gkedewnr A Hspfx Ab Tjf Vollständig geprüft und einsatzbereit 📍 Verfügbarkeit & Lieferung Diese Maschine ist lagernd und kann sofort besichtigt und geliefert werden. Versandunterstützung innerhalb Irlands, UK und Europas möglich. 📞 Jetzt anfragen Sie suchen eine zuverlässige Mehrband-Schleifmaschine mit professionellen Ausstattungsmerkmalen? Die Viet Challenge 223 ist in diesem Zustand und zu diesem Preis eine seltene Gelegenheit. Viet Challenge 223 Breitbandschleifmaschine zu verkaufen Gebrauchte Breitbandschleifmaschine im sehr guten Zustand Industrie-Schleifmaschine für die Holzbearbeitung Schleifmaschine für Plattenmaterial Doppelschleifkopf-Breitbandschleifmaschine für Massivholz Viet Breitbandschleifmaschine Irland / UK / Europa Breitbandschleifmaschine für Möbel- und Korpusfertigung

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.150 mm, skupna višina: 2.250 mm, skupna dolžina: 2.300 mm, širina brušenja: 1.300 mm, skupna masa: 4.500 kg, moč: 41 kW (55,74 KM), Wide Belt Sander The multi-purpose surface sanding machine MFA 8 is used for sanding flat wooden materials and/or lacquered flat wooden materials. The sanding width is 1300 mm, and the working height is a constant 880 mm. The maximum pass-through height for workpieces is 140 mm. The machine comes equipped with cross and longitudinal sanding units as well as a brush roller. All sanding units feature an intermittently operating sanding belt blower. Gedpfxewlq Nto Ab Tekf Sanding width: 1300 mm Motors: 41 kW 3 units (cross sanding unit, sanding pad unit, and brush roller) digital and pneumatic control

Stanje: skoraj kot novo (rabljeno), Širina brušenja mm: 1350, Višina brušenja mm: 80, Število brusnih trakov: 1, Valji: ne, Gkjdpshqwf Tsfx Ab Tjf Prečna brusilna enota: ne, Čeljustna enota: da, Elektronsko upravljanje: da, Moč prvega brusnega traku v kW: 11, Vmesno brušenje laka: da, Konstantna višina mize: da, Segmentirani brusilni čevlji: 40, Krtačna enota: da, Leto: 1989

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Wide Belt Sander CB 1300 R+RR Gedpfx Asw U D Duob Tskf Specification: • Condition – used, after comprehensive inspection and calibration • Manufacturer – CB • Model – 2NRKRR13002N • Working width – 1,300 mm • 2 sanding units: - First: calibration drum, hard rubber – Ø 230 mm - Second unit: 2 drums, hard and soft, each with independent adjustment, Ø 160 mm each • Main motors: 2 x 9.2 kW • Conveyor with two working speeds • Electronic thickness gauge for the sanded component • Oscillation control via photocells • Extension support rollers • Electric height adjustment (up/down) • Thickness measuring gauge for the sanded material • Sensor for preventing over-thick pieces from entering • Original paintwork • Abrasive belt size: 1,340 x 2,200 mm • Extraction ports: 3 x 180 mm • Weight approx. 2,200 kg • Early 1990s machine • Overall dimensions: 200 x 220 x 210 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Published photos reflect the actual state of the item for sale • Possibility to power up and test the machine on site

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, SCM Wide-Belt Calibration and Fine Finishing Sander Model: dmc sd 60 RCS 135 Technical Data: Working width: 1,350 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,370 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Feed motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard Equipment: - R140/85 rubber-coated calibrating roller, 140 mm diameter, 85 Shore hardness – 1st position - R160/45 rubber-coated sanding roller, 160 mm diameter, 45 Shore hardness – 2nd position - Hard sanding pad with manual adjustment of working height - Motor power for 1st unit: 11 kW (15 HP) - Electronic ammeter for main motor, indicates power consumption - Electronic digital display for working height - Electronically controlled abrasive belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before the first unit - Rubber feed belt, 60 Shore hardness - Roller table with two rollers at infeed and outfeed of the working table - Conveyor feed with two speeds: 4.5 / 9 m/min, via geared motor - Automatic conveyor belt tracking Including the following special equipment: 1 pc. Version "B" for RCS with: pneumatic on/off switching of roller for 1st unit “R” + pneumatic on/off switching of roller for 2nd unit “CS” + “MESAR” elastic segmented pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic adjustment of working height Gkjdpfstwqn Sex Ab Tsf 1 pc. CE safety compliance 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller for 1st unit 1 pc. main motor 18.5 kW (25 HP)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Double-sided grinder Year of manufacture: 07.2019 Brand new, unused. 1) Net weight: 15,000 kg 2) Dimensions: 2200 x 3100 x 3050 mm Gkjdpfjt Dmmcox Ab Tjf 3) Higher grinding speed 4) High precision Technical specification 1) Max. grinding width: 1300 mm 2) Grinding thickness: 5-150 mm 3) Grinding length: > 700 mm 4) Abrasive belt speed: 25 m/s 5) Abrasive belt dimensions: 1350 x 2800 mm 6) Total motor power: 163.25 kW 7) Grinding head motor: 75 kW x 2 8) Feed motor: 11 kW 9) Lifting motor: 0.75 kW 10) Brush motor: 0.75 kW x 2 11) Feed speed: 10-30 m/min 12) Power supply: 380 V 50 Hz 13) Working pressure: 0.6-0.8 MPa 14) Extraction performance: 24,000 m³/h a. Wide thickness range for board grinding: 5-150 mm. b. Capable of processing sheet thickness over 25 mm with high quality results. c. The upper and lower conveyor pressure rollers use dual power transmission, increasing conveying efficiency and ensuring smooth operation. This delivers high-precision grinding and excellent surface quality. d. To meet the requirements of diverse panel processing, a frequency-controlled, adjustable speed drive system and variable-speed motor have been adopted for conveying. e. Key electrical components from Siemens have been selected to ensure extended service life.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A11108GM1, Wide Belt Sander Costa K6 CCC 1350 Year of manufacture: 2001 Technical condition: very good, after a complete overhaul at COSTA in 2023 Gksdpfx Ajwczkijb Tjf The Costa K6 CCC 1350 wide belt sander from 2001 is a robust industrial machine designed for sanding and calibrating wooden surfaces. The machine features a fixed working table and a movable working unit with rollers. Constant working height: 890 mm – suitable for integration into production lines. Additionally, the machine is equipped with a vacuum table powered by its own fan. Key technical specifications: - Working width: 1350 mm - Number of sanding units: 3 (steel calibration roller, 2x rubber rollers) - Cleaning or sanding brush - Sanding belt length: 3250 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 3 h, Funkcionalnost: popolnoma funkcionalen, The machine is hardly used, like new, year of manufacture 2021. Table dimensions: 220x80 cm. Gsdpfx Abjudy D To Tskf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, delovna širina: 1.250 mm, delovna višina: 160 mm, For sale: Viet Valeria 3 CCT 1350 Sup and Viet Valeria 3C INF 1350 top and bottom sanding line. · Max. working width: 1250 mm · Max. working height: 160 mm · Upper belt dimensions: 1400x3250 mm, lower belt dimensions: 1400x2620 mm Each of the top and bottom units includes: · Steel roller – 45 kW, diameter 320 mm · Rubber roller – 30 kW · Pneumatic sanding pad/foot – 16 kW The line is controlled via Siemens touch panels. Heavy Duty line – designed for long-term and intensive operation. Gedpewbp N Rjfx Ab Tokf The line is in 100% working order and ready for immediate use. Full documentation available for inspection. The line is connected and can be tested on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.320 mm, višina brušenja: 160 mm, Wide Belt Sander SAC Project RT 1320 Specification: • Condition – used, fully serviced and calibrated • Manufacturer – SAC • Model – Project RT 1320 • Working width – 1320 mm • Max. working height – 160 mm • 2 sanding units: - First: calibrating roller, hard rubber, diameter 300 mm (brand new, freshly coated) - Second: pad unit with sectional pressure shoe and jump-in/jump-out function • Dust extraction brush at the outfeed • Main motors: 10 and 11 kW • Total machine power at full load – 28 kW • Machine controlled by touchscreen panel with memory function for various programs and settings as required • Possible to operate in manual mode (entering your own parameters) or automatic mode (pre-set programs with saved parameters) • Infinitely variable speed of the second sanding unit • Infinitely variable feed speed of conveyor • Electronic thickness indicator for the workpiece • Vacuum pump included • Paper cleaning mechanism • Photoelectric oscillation control • Conveyor in very good condition • Extension support rollers for workpieces • Workpiece thickness gauge • Safety sensor preventing entry of overly thick workpieces • Original paint • Abrasive belt size – 2620 x 1320 mm • Extraction ports – 3 x 175 mm + 120 mm (from brush) • Weight – 2300 kg • Year of manufacture – 2001 • Overall dimensions – 255 x 205 x 230 cm (L x W x H) Additional Information: Gkjdpfjw U Dxfjx Ab Tsf • Very good, original technical and visual condition • The photos show the actual condition of the machine offered for sale • The possibility to run and test the machine on site

Stanje: rabljeno, Leto izdelave: 2008, Boere Select 1300 KC Širokopasovni brusilnik (kontaktni + kombinirani agregat) Opis Število brusnih enot: 2 Tip enot: 1 kontaktna in 1 kombinirana enota Širina brušenja: 1300 mm Število motorjev: 2 Prehodna hitrost: 4-15 m/min Vakumska miza: Ne Moč motorja: 15 kW Gjdpfx Abow Emwms Tokf Premer odsesavanja: 250 mm (Kljub naši največji skrbnosti so vse spremembe ali napake v tehničnih podatkih, cenah ali informacijah možne zaradi (tipkarskih) napak. Za tiskane podatke ne jamčimo! Dobavljivost pod pogoji predhodne prodaje.) Cene ne vključujejo stroškov oglaševanja na Machineseeker / Cene brez stroškov vnosa na MaschinenSucher Najboljši stroji za obdelavo lesa iz Nizozemske

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Heavy-duty calibrating sander with fixed table 3 units Working width: 1350 mm Workpiece thickness: from 3 to 160 mm, optionally up to 220 mm Feed speed: Calibrating machines: from 3 to 15 m/min Sanding machines: from 4 to 20 m/min Standard equipment (selection): Costa Levigatrici Standard machine control Special equipment (selection): Contact roller adjustment: electronically via GSE Electric Grit Kit pneumatically via GSP Pneumatic Grit Kit Gksdpfx Abst Hxgys Tef Costa Levigatrici TP 16 or Costa Levigatrici TP 32 sectional pressure pad in the combination unit instead of the air cushion Non-contact sanding belt control Oscillating sanding belt blow-off system Up to 2 brushing units Feed table Vacuum table Overhanging (floating feed table) Automatic workpiece thickness adjustment Machine control: Costa Levigatrici START Costa Levigatrici PCM Weight: 3800 kg Operating voltage: 400V/50Hz Rated power/current: 49 kW / 97A

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 2007.10.191, with Heesemann dust extraction unit, Type: EA 8 Sanding width: 1350 mm Workpiece height: 3 – 150 mm Gjdpfxsv Enzus Ab Tskf Aggregates: 3 x cross sanding units, each 15 kW; 1 x longitudinal sanding unit with pressure lamella belt, 15 kW; 1 x brush roller unit, 0.75 kW; Total connected load: approx. 80 kW Total air requirement: 193.5 m³/min

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, The HSM is the perfectly tailored wide belt sanding machine designed to meet the needs of small and medium-sized craft and industrial businesses. Whether you require effect sanding, cross sanding, lacquer or high-gloss finishing, whether processing panels, solid wood, or veneered workpieces – the Heesemann HSM is the ideal sanding machine for professional woodworking! This wide belt sander is especially interesting for joiners and interior fitters. The HSM is available in predefined standard configurations, equipped with two, three, or four sanding units, and can be fitted with a cross belt for cross sanding applications. Gjdpfx Aow Db Drob Tokf Units and features can be selected individually. We would be pleased to provide you with a tailor-made quotation.

Stanje: dober (rabljeno), Leto izdelave: 2000, • Sanding width (mm): 1350 • Workpiece thickness (mm): 3 - 150 • Total sanding units: 2 • Longitudinal belts: 2 • Contact roller diameter = 200 mm: 1 / 15 kW • Combination unit: with small roller Gksdpfx Aswwlm Dob Tof • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate lacquer sanding • Constant table height • Carpet cleaning • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed rate: 3 - 12 m/min • Sanding belt length, longitudinal unit (mm): 2,100 x 1,400 • Pressure beam: CSD system, electromagnetic, wear-free • Conveyor belt: new • Availability: inspected, in stock

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Wir bieten zum Verkauf eine HESSEMANN MFA IMPRESSION Multifunktions-Schleifmaschine für Flachflächen an. Die Maschine wurde 2017 für den Eigenbedarf angeschafft und verfügt über einen äußerst niedrigen Betriebsstundenzähler – es wurden nur 100-150 m² pro Monat geschliffen. Hier handelt es sich um eine umfassende Lösung für präzises Quer-, Rotations- und Längsschleifen, die höchste Oberflächenqualität garantiert. Gkodswp Ul Topfx Ab Tsf Hauptmerkmale und Vorteile: - Arbeitsbreite: 1.350 mm - Schleifvielfalt: Die Kombination aus Quer-, Rotations- (RUT-Bürsteneinheit) und Längseinheiten ermöglicht verschiedene Schleifeffekte. - Präzise CSD®-Steuerung (10 Jahre Garantie): 2 Druckbalken mit computergesteuerter, selektiver Druckeinstellung. Kein Überschleifen der Kanten, konstanter Druck, Ausgleich von Werkstücktoleranzen bis zu 2 mm. Das elektromagnetische System ist wartungsfrei. - Fortschrittliche Automatisierung: Industrie-PC 10,4" LCD-TFT (mit Touchscreen, Windows Embedded Standard), Speicher für 100 Programme. Automatische Einstellung der Schleifparameter (Motordrehzahlen, Start/Stopp, Schleifintensität, Anpressdruck). - Hohe Effizienz: Vorschubgeschwindigkeit einstellbar von 3-15 m/min. - Sicherheit und Zuverlässigkeit: Schleifband-Abblasvorrichtung, Reinigung des Transportbands. - Integrierte Lösungen: Druckrolle am Einlauf für dünne Werkstücke, Hohlwalzen zur Führung kleiner Elemente, Ionisationsleiste, Werkstück-Abblasvorrichtung. Maschinenaufbau: - Gehäuse: Maschinenrahmen mit Endlostisch (Transportband mit ½ Zoll Diamantprofil, Bandreinigung). Konstante Arbeitshöhe 880 mm. Oberteil der Maschine mechanisch an die Werkstückdicke (3-160 mm) verstellbar. - Steuerung: Integrierter Schaltschrank, Industrie-PC 10,4" TFT-Farbdisplay (800x600), CF-Karte 1 GB, Windows Embedded Standard, Touchscreen, Produktions- und Stillstandsindikator, Intranet-Anschluss, Speicherkapazität für 100 Programme. - Andruckrolle: Ø 100 mm, federbelastet und verstellbar. - Hohlwalzen: 2 angetriebene Walzen (Einlauf und Auslauf) zur Führung kleiner Werkstücke. Queraggregat (1 Stück): - Bandabmessung: 5.400 x 150 mm - Bandgeschwindigkeit: 2,0–20 m/s (frequenzgeregelt) - Antriebsleistung: 15 kW - Band-Abblasung, verschleißfreie Bremseinheit, „Tür-in-Tür“-Version R-U-T-Bürsteneinheit (1 Stück): - Bürstenscheiben mit rotierender queroribtaler Bewegung - Kollektivantrieb für bis zu 19 Bürstenscheiben (7,5 kW mit Frequenzumrichter) - Bürstenlauf in beide Richtungen, zentrale Höhenverstellung, Schnellwechselsystem für Bürstenscheiben - Bürstentyp: Flex Trim, Ø 180 mm, Drehzahl: 5–25 m/min (1,5 kW mit Umrichter) Längseinheit (1 Stück): - Bandabmessung: 2.620 x 1.400 mm - Bandgeschwindigkeit: 1,8–18 m/s (frequenzgesteuert) - Antriebsleistung: 15 kW - Bandabblasung (doppelte Düsenanzahl), verschleißfreie Bremseinheit, automatische Ausgleichung möglicher Bandlängenunterschiede, Band gegenläufig - Exzentrische Position der Frontführungswalze für leichte Kalibrierungsarbeiten Bürstenwellenaggregat (1 Stück): - Bürstentyp: Faser, Ø 120 mm - Antriebsleistung: 0,75 kW Vakuumtisch: Sicherer Transport von Werkstücken

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, The HSM Compact is the universal surface sanding machine for craft businesses. It is designed for calibration, intermediate sanding of veneers and lacquer, structuring, as well as cleaning of panels, solid wood, or veneered workpieces. Thanks to its compact dimensions, it is optimally suited for a wide range of requirements. With the HSM Compact, you receive a multifunctional sanding center on just 4.5 m² of floor space, ideal for achieving diverse surface qualities. It is Heesemann’s smallest machine, equipped as standard with the patented CSD magnetic pressure beam, allowing you to move away from manual sanding to automation. Gsdsw Dbx Njpfx Ab Tjkf HSM .2 Compact ROLLER/LONGITUDINAL DLB - Year of manufacture: 2025 - Sanding width: 1,350 mm - Vacuum clamping system with vacuum extraction table and demand-driven suction - Constant working height (880 mm) - Workpiece thicknesses: 3-200 mm - Automatic workpiece thickness measurement at infeed - Non-driven rollers at machine infeed and outfeed - Electromagnetic pressure beam (CSD) - 15.6″ touch display - LED lighting on the belt support side - Fold-out table with wooden surface at outfeed - Structuring brush unit (Ø 200 mm) incl. 5.5 kW drive via frequency converter and quick-change system, fitted with Anderlon bristles - Cleaning brush unit, horsehair (Ø 120 mm)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Wide belt sander DMC Technosand K Technical specifications: Working width: 1350 mm Number of sanding units: 2 Gkodpfx Abov Nxfrj Tef Feed speed: Adjustable, 4–16 m/min Workpiece thickness: 3 to 160 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, The JSM is an affordable all-round machine for small and medium-sized craft businesses with high demands on surface quality. It is available in two sanding widths and three equipment packages. Depending on the package, it is ideally suited for solid wood, veneer, and lacquer sanding. - Sanding width: 1,100 or 1,350 mm - Feed unit with profiled conveyor belt - Feed speeds: 3 - 12 m/min - Variable working height via motorized height adjustment (maximum table height: 880 mm) - Workpiece thicknesses: 3 - 160 mm - Pressure roller (Ø 50 mm) Gkjdjwz Ignspfx Ab Tof - Table extension with non-driven rollers at machine infeed and outfeed (300 mm each) - 15.6" touch display (integrated) - CSD pressure beam system (magnetic pressure beam) - Program for remote maintenance - Sanding belt length: 2,150 mm, sanding belt width: 1,120/1,370 mm - Energy Management System (EMS) for energy-efficient machine operation - 1 emergency stop switch at the terminal, 2 emergency stop switches at the machine outfeed - LED lighting inside the machine (on the belt feed side) - Terminal and belt feed side on the left - Electrical configuration: 400 V, 50 Hz Advanced package additional features: - Vacuum table pre-drilled for connection of vacuum blower - Vacuum blower integrated within the machine - Workpiece cleaning with oscillating air blast tube - CSD pressure beam system (magnetic pressure beam) instead of ACP system - Oscillating sanding belt cleaning - Belt Manager software