Kuendig nakup rabljenega (19)

Stanje: novo, Leto izdelave: 2025, Kündig Edge Sanding Machine Uniq-S Edition 30 In Top Condition - Immediately Available - - Complete sanding unit tiltable up to 45 degrees motorized, without any table adjustment required Iedpfx Ahsvk R Are Detn - Feed system integrated into the machine frame, transport belt 50 mm wide on the bottom, pressure rollers 60 mm diameter on top, motor 0.55 kW, infinitely variable speed 3 – 15 m/min - Double-sided operation with straight and contour sanding sides - Sanding belt size: 200 x 2000 mm - Sanding belt drive motor: 3 kW, 380 V, 50 Hz - Oscillation stroke programmable 10 – 90 mm - CE compliant/Dust tested Standard configuration Kündig Uniq-S Accessories: - Q4 Auxiliary Table for Belt Drive Roller - Q6 Semi-circular Table for Belt Drive Roller - Z04 Table Extension Location: Available ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, Kündig Duplex 1350 KdS-E Brilliant + Lacquer Quality product from Switzerland CONSTANT PASS LINE MACHINE / Automatic Head Adjustment Wide Belt Calibrating and Fine Sanding Machine 1st Unit: Combination Unit with 90 Shore Contact Roller and Sanding Pad Unit with Electronically Controlled Segment Sanding Shoe Contact roller level infinitely adjustable according to grit scale Sanding unit tiltable for diagonal sanding Infinitely variable sanding belt speed: 3 - 18 m/sec Oscillating belt blow-off 2nd Unit: Sanding pad unit with electronically controlled segment sanding shoe Iedsw Elvzspfx Ah Djtn Sanding belt drive motor power: 15 kW Working width: 1350 mm Max. workpiece thickness: 160 mm Feed speed infinitely adjustable: 3 - 15 m/min Stable vacuum table with lacquer carpet Automatic workpiece thickness adjustment ENORMATIC quick adjustment with feed release (for long workpieces) PLC control with LCD screen for automation and management of all work programs Infeed and outfeed tables with roller supports Machine is FULLY REFURBISHED, IN TOP CONDITION Available from stock Lieboch

Stanje: zelo dobro (rabljeno), Širokopasovni stroj 1100 mm, 2-pasni valj, brusilni čevelj, samo 3280 ur, nastavitev zgornjega dela Itodpfsxbntfsx Ah Den

Stanje: dober (rabljeno), - Used machine - Working width: 1350 mm Iedpfowhvfxjx Ah Dstn - Rubber sanding drum - Rubber sanding drum - Sanding pad with cushion - Vacuum conveyor belt - Rated current: 131 A - Rated power: 62.7 kW - Voltage: 400 V

Stanje: rabljeno, številka stroja/vozila: 006385, Max. processable width: 1000 mm Iedpfewcybgex Ah Dstn Min. processable thickness: 3 mm Work table: fixed height Number of working units: 2 pcs

Leto izdelave: 2025, Stanje: novo, New machine Year of manufacture: 2025 - Robust, space-saving double wide-belt sander for demanding applications - Consistent working height due to top adjustable section - Working width: 1350 mm - Maximum passage height: 205 mm (up to 18.5 kW main drive motor) - Sanding belt size: 1350 x 2000 mm 1st Unit “R” Contact Roller - Fluted rubber contact roller, hardness 80 Sh - Contact roller level infinitely adjustable via touch screen - Motorized lifting/lowering of the contact roller according to aggregate selection 2nd Unit “Ed-L” Diagonal Sanding Pad - Entire sanding unit can be tilted by 10° - Electronic sanding pad with 22 mm segment width (pivoting special version), with variable edge pressure, automatic pressure regulation, and storage of sanding pad segments - Infinitely variable sanding belt speed (with PLC memory storage)* - Additional sanding pad insert Main Motors - 1st unit: 18.5 kW (25 HP) / 400 V/50 Hz - 2nd unit: 11 kW (15 HP) / 400 V/50 Hz Workpiece Feed - Fabric-reinforced rubber feed belt - Rubber-coated feed belt drive roller - Motor: 2.2 kW (3 HP) / 400 V/50 Hz - Speed: infinitely adjustable 3 - 15 m/min Vacuum Device - On feed table - Additional perforated area of feed belt over 200 mm - Vacuum generator: 2.2 kW (3 HP) / 400 V/50 Hz Sanding Belt Cleaning - Air knife for cleaning the sanding belt of the 2nd unit “Ed-L”, automatically activated, with extraction channels and powered by the vacuum generator from the vacuum table using vacuum return air including diverters Pressure Elements - Infeed: parallel spring-loaded, ground steel pressure roller Ø 50 mm - Between units: rubberized pressure roller Ø 50 mm - Outfeed: rubberized pressure roller Ø 50 mm Standard Equipment - Motorized, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking and oscillation, approx. 4 l/min compressed air consumption - Optimal safety via automatic immediate stop with disc brake in case of belt breakage, etc. - Complete electrical system with contactor controls; automatic star-delta start of the main motor, motor protection and ammeter for monitoring material removal - Automatic thickness adjustment across the full working width - Workpiece over-thickness protection with immediate feed stop and automatic lifting - Electronic compensation for abrasive belt grit size - Infinitely adjustable stock removal - Electronic feed speed control at the operation panel, infinitely adjustable 3 - 15 m/min - PLC control/programming with color touch screen and TEACH-IN memory (one-touch operation according to sanding result, i.e., no manual input required) - Pneumatic feed belt tracking control - Workpiece support rollers at infeed and outfeed - ENORMATIC: Fully automated quick setup and feed release - eco*-energy saving mode - Error diagnostics - Order and operating hours counter, square meter counting, and belt wear visualization - High-quality, swiveling plexiglass control panel with LAN and USB connection - 10'' touch screen with Industry 4.0 control Iedjwt E Utjpfx Ah Dotn - Prepared for automatic damper control of extraction per aggregate Machine supplied ready for operation in LACKZWISCHENSCHLIFF (intermediate lacquer sanding) version (1350-REd-L) Additional equipment for “LACKZWISCHENSCHLIFF” version on the 2nd unit: - [Please specify additional features if needed]

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Iedpfx Asfig Rwoh Detn Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 650 mm, Oprema: Na voljo je tipska ploščica, Kündig Botop, sanding unit above: roller, pneumatically-operated pad; sanding unit below: roller, pneumatically-operated pad. The machine has been completely overhauled: new conveyor belt and new rollers. Iodpfx Ahsvmt D Ro Dstn

Stanje: dober (rabljeno), Leto izdelave: 2010, • Simultaneous top and bottom sanding: with roller and pneumatic sanding shoe units • Double-sided processing of parts: in a single pass • Above-average working speed, reduced labor input, excellent surface finish • Working width (mm): 1100 • Feed drive: 1.5 kW each, frequency-controlled • Height adjustment: 0.75 kW each • PLC: Omron • Vacuum: 1.5 kW Itjdpow A R U Rofx Ah Dsn • Enormatic: Automatic measurement of workpiece thickness, fully automatic adjustment and automatic start of feed and sanding process

Stanje: rabljeno, Delovna širina 1100 mm Delovna višina 2 - 180 mm Hitrost brusnega traku 9 + 18 m/min Brusni trak 2800 x 1120 mm Podajanje 6-25 m/min 1 kombinirana enota Iodpfsw N Ngdex Ah Detn Teža 2450 kg Stroj naložen prosto

Stanje: rabljeno, številka stroja/vozila: 138053, širina brušenja: 1.300 mm, višina obdelovanca (maks.): 160 mm, 2 sanding belts (roller - pad) Sanding roller motor: 18.5 kW Iedjwmwm Ispfx Ah Dstn Sanding pad motor: 15 kW Feed speed: 3 - 15 m/min Weight: approx. 2,200 kg

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 Edge sanding machine with integrated double conveyor feed system for solid wood parts, veneer edges, and curved workpieces, featuring full unit oscillation. Processing of solid and veneered edges either manually or via automatic feed. - On the veneer sanding side, material is guided along two adjustable fence plates (the infeed fence features integrated extraction slots and is finely adjustable according to a scale based on stock removal), onto an elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two return rollers), with infeed fence extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid sanding side, workpieces are sanded against the continuous, glide-coated sanding belt backing, table size 1180 x 325 mm, including miter gauge with scale. - On the front side, optionally equipped with a quickly installable semi-circular table (with extraction holes) for sanding against the rubber-coated drive roller, Ø 90 mm, resting radius 300 mm. - At the drive roller, optionally equipped with a quickly mountable cast iron auxiliary table (with extraction holes), 400 x 500 mm, mounted on an oscillating spindle for use with sanding rollers Ø 25, 30, 40, and 45 x 100 mm for external and internal curves, with protective cover for the spindle. Design: Robust machine base with heavy-duty cast-iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented design), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, programmable oscillation stroke from 10 to 90 mm, electrical cabinet integrated in frame, constant belt tension with automatic length compensation, adjustable belt tracking, touch guard plate, dust extraction via two extraction hoods, flexible hoses and a common internal pipe leading to a Ø 150 mm connection flange, recess in base for easy machine movement with pallet jack or forklift; belt width 150–200 mm, belt length 2000 mm, working height 830 mm (solid wood sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the machine base, two parallel conveyor belts underneath, spaced 250 mm apart, belts 50 mm wide, upper pressure rollers 20 mm wide, motor 0.55 kW (0.75 HP), infinitely variable speed control from 3 to 15 m/min. COMFORT version Kündig UNIQ-S Includes: Table extension UNIQ/UNIQ-S/Flash Includes: Upward extraction duct for UNIQ without shutter Includes: Semi-circular table for drive roller UNIQ-S Iodjw Tfx Djpfx Ah Detn Availability: Short term Location: Flörsheim

Stanje: novo, Leto izdelave: 2025, Automatic Sander KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. structuring unit Robust 3-wide belt sander for the highest demands Consistent working height thanks to upper section adjustment Isdpor Hr Dzjfx Ah Detn Working width: 1350 mm Pass-through height max.: 205 mm (up to 18.5 kW main drive motor) Abrasive belt dimensions for "R" and "Ed-L": 1350 x 2000 mm Abrasive belt dimensions for "Xi-L": 150 x 4700 mm Unit "R" – Contact Roller - Grooved rubber contact roller, hardness 80 Shore - Contact roller height continuously adjustable via touch screen - Motorized lifting/lowering of the contact roller depending on aggregate selection - Increased belt speed Unit "Ed-L" – Diagonal Pad - Electronic sanding pad with 22 mm segment width (special pivoting version), with variable edge pressure, automatic pressure regulation, and segment memory - Continuously adjustable belt speed (PLC-stored) - Additional sanding pad insert Unit "Xi-L" – Cross Sanding Unit Integrated in Machine Body - Electronic sanding pad with 22 mm segment width, variable edge pressure, automatic pressure regulation, and memory for sanding pad segments - Cross sanding belt supported by lamella belt - Continuously adjustable belt speed (PLC-stored) Perfect-3 1350-REdXi-LL Main motors: - 1st unit: 18.5 kW (25 HP) - 2nd unit: 11 kW (15 HP) - 3rd unit: 16 kW (MPM) (22 HP) 400 V / 50 Hz Workpiece feed: - Fabric-reinforced rubber conveyor belt - Rubberized conveyor drive roller - Motor: 2.2 kW (3 HP) / 400 V / 50 Hz - Speed: infinitely variable 3 - 15 m/min Vacuum system: - On feed table - Additional perforation of conveyor belt over 200 mm - Vacuum generator: 2.2 kW (3 HP) / 400 V / 50 Hz Abrasive belt cleaning: - Air knife for cleaning the abrasive belt in "Ed-L" and "Xi-L" units, cycle-controlled, with extraction channels, driven by blower 1.1 kW (1.5 HP) 400 V / 50 Hz Pressure elements: - Infeed: parallel spring-mounted, ground steel pressure roller ⌀ 50 mm - Between units: rubberized pressure roller ⌀ 50 mm - Outfeed: rubberized pressure roller ⌀ 50 mm 1. Grooved rubber contact roller, 80 Shore 2. Diagonal sanding pad with paint configuration and air knife for belt cleaning 3. Cross sanding unit with paint configuration and air knife for belt cleaning Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz Additional equipment: W61: Structuring unit at outfeed B 10: Abralon structuring brush, Mink W71: Additional quick-change shaft for 1350 mm brush B 12: Brass-coated steel wire brush 1350 mm C 10: LED package A 20: 5 x motorized adjustment dampers (2x D=180 + 3x D=150 mm) Working width: 1350 mm Max. workpiece height: 205 mm Abrasive belt dimensions: 1350x2000 mm and 150x4700 mm 10” touch screen with Industry 4.0 control Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 26476, delovna širina: 1.350 mm, širina brušenja: 1.350 mm, skupna masa: 7.500 kg, višina brušenja: 200 mm, vrsta nastavitve višine: električni, dolžina brusnega traku: 2.000 mm, višina obdelovanca (maks.): 200 mm, širina brusilnega traku: 1.350 mm, moč pogonskega motorja podajalnika: 2.200 W, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, širina obdelovanca (maks.): 1.350 mm, Five-belt calibration and fine sanding machine, sanding from above and below for solid wood or wood-based panels. Itodevy Dt Njpfx Ah Djn Factory overhauled to current standards. 5 sanding units (2x calibration rollers above/below, cross sanding unit, 2x segmented sanding pads—of which 1 includes the unique diagonal sanding unit featuring patented KÜNDIG Brilliant technology), as well as the KÜNDIG Enormatic control system for automatic workpiece feed. Machine fully refurbished—see attachment for further information.

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Specification and technical data: The Master delivers precision sanding. It encapsulates the essence of our 75 years’ experience in sanding technology. This means it comes equipped "out of the box" with all the features essential for fast, reliable production of perfect surfaces—nothing more, nothing less. The core model Kündig Master is fitted with a calibration roller and a sanding pad unit, based on a proven design that guarantees long-term maintenance of high sanding precision—even across its generous working width of 1350 mm. In addition, a control unit is integrated for fast and intuitive operation. Itodpfx Ahjw Naanj Dsn Sanding units – Proven combination The sanding system relies on a tried-and-tested combination of calibration roller and sanding pad. For optimal workpiece guidance, a parallel-sprung steel pressure roller is fitted at the machine infeed, with rubber pressure rollers placed between the sanding units. Calibration Unit (R): The calibration unit consists of a grooved rubber contact roller of proven hardness. It is ideal for calibration tasks, even for higher material removal rates if required. The contact roller level is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Segmented sanding pad (E): Equipped with the E-Plus configuration, the fine sanding unit features—not pneumatically, but—an electronically controlled, segmented sanding pad with a scanning width of 35 mm. This enables even more precise fine sanding at the edges of workpieces. The edge pressure of the sanding segments is automatically regulated, but can also be precisely adjusted via the touchscreen to further refine the finish around the workpiece edges. Changing the graphite glide belt is also quick and easy. Equipment – At a glance Construction: In terms of robustness and durability, the Master is on par with our other model ranges. It benefits from the same solid construction that makes all of our machines long-term investments, and is designed to deliver precise sanding results for many years. Upper section adjustment: For over thirty years, we have equipped our machines exclusively with upper section adjustment. Why? Although it is more complex to engineer than table adjustment, it offers numerous advantages: Greater permissible workpiece weights, better long-term precision, and the consistent working height. Workpiece dimensions: Adjustment of the upper section (clearance opening) is motorized and finely regulated via touchscreen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, well-established standard dimension.

Stanje: novo, Leto izdelave: 2025, Edge sanding machine with top-mounted feed unit What sets the Uniq-S apart from the Uniq is its integrated feed system in the machine table, featuring a rubberized feed belt and a top pressure beam. This significantly facilitates the sanding and production of beveled and chamfered edges, as well as the serial sanding of workpieces. It is also particularly helpful when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the upper pressure beam gently convey the material. Optionally, a second, bottom conveyor belt is available. The top pressure rollers can also be replaced by a rubber belt, which is especially helpful when sanding extremely small parts. The Uniq-S is recommended as an all-rounder, capable of performing all operations – from solid wood to fine veneer edges – at a high level of quality. The continuously adjustable feed speed allows for optimal adaptation to the material being processed. 1. Sanding station: "Veneer side" 2. Sanding station: "Solid wood side" Itedpfx Ahshqb Rce Dsn 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semicircular table" Location: In stock at 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside of our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Features and technical data: • Intermediate lacquer sanding (Cd-L) version • Robust, space-saving single-wide belt sander designed for demanding calibration and final sanding • Constant working height ensured by upper section adjustment • Working width: 1350 mm • Overhead sanding with combination unit • Complete sanding unit tiltable up to 10° • Grooved rubber contact roller with proven hardness • Infinitely adjustable contact roller height with abrasive grit scale • Pneumatic lifting/lowering of the contact roller based on aggregate selection • Sanding pad with quick-change sliding coating • Parallel spring-loaded, ground steel pressure roller at infeed • Rubber-coated pressure roller at outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz; soft start for low current draw on startup • Motorized, finely adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatic; compressed air consumption approx. 2 l/min • Optimum safety with automatic emergency stop via disc brake in the event of belt breakage, belt misalignment, loss of pressure, or opening of belt entry door • Workpiece feed motor 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum unit for work table with small parts area, integrated fan in machine base • Complete electrical system with contactor control; automatic star-delta starting of main motor, motor protection and ammeter for monitoring material removal • Maximum workpiece height: 200 mm • Belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the entire working width Isdpfekwhxisx Ah Djtn • Workpiece over-thickness protection with feed emergency stop and automatic lifting of main unit • Stepless adjustment of material removal rate • Electronic feed control at operator panel, stepless 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory function (results saved with button press based on sanding result, no manual input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: fully automatic quick setting and feed initiation (very useful for large workpieces) • eco*-energy saving mode • Fault diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (special pivoting version) - Variable sanding belt speed (programmable memory) - Air nozzles for sanding belt cleaning, operationally controlled, additional extraction port - Additional sanding shoe insert for lacquer sanding Includes swiveling air knife Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2024, New machine Iedpfx Ahsuhiq De Djtn Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical data: • Robust, space-saving 2-belt wide belt sander for demanding pre- and finish-sanding applications • Consistent working height thanks to top section adjustment • Working width: 1350 mm • Top sanding, with 2 sanding units • First unit fitted with a grooved rubber contact roller in proven hardness • Pneumatically (program-controlled) positionable contact roller, roller height infinitely adjustable based on a grit scale • Second unit with electronically controlled, segmented sanding pad, segment width 35 mm, with quick-change pad lining • Spring-mounted, ground steel pressure roller at infeed • Rubber-coated pressure rollers between sanding units and at outfeed • Motor: 15 kW (20 HP), 400 V/50 Hz with soft start for reduced current draw at startup • Motorised, fine-adjustable height setting with digital display • Belt tensioning, tracking, and oscillation: Pneumatic, compressed air consumption approx. 4 l/min • Optimum safety via automatic instant stop with disc brake in the event of belt breakage • Workpiece feed: 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt • Complete electrical system with contactor control; automatic star-delta starting for main motor, motor protection, and ammeter for monitoring material removal • Pass-through height: 200 mm • Abrasive belt dimension: 1350 x 2000 mm Comfort features: • Automatic thickness adjustment over the entire working width • Workpiece thickness overrun protection with immediate feed stop and automatic lifting of machine top section • Infinitely variable material removal adjustment • Electronic feed control from the operator panel, continuously adjustable between 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (store at the push of a button as per sanding result, i.e. no data entry required) • Pneumatic conveyor carpet control • Workpiece support with roller at infeed and outfeed • Enormatic: Fully automated quick set-up and feed solution • eco* energy-saving mode • Fault diagnostics • Order and operating hour counter • Machine in E-Plus version (RE) Including outfeed table extension 1350 mm, foldable, without insert plate Including freight, unloading on-site Including commissioning and training Location: Hochheim Availability: Approx. week 51 / 2023

Stanje: rabljeno, Leto izdelave: 2000, Used feed unit Year of manufacture: 2000 Suitable for: Kündig edge sanding machine Uniq Technical specifications: Max. reach: 1050 mm Number of feed rollers: 4 Itsdjumpp Eopfx Ah Djn Roller diameter: 120 mm Roller width: 60 mm Roller spring travel: 25 mm Speed settings: 8 (2/4/5.5/6.5/11/13/16.5/33 m/min) Motor power: 0.75 kW Connection: 400V/50 Hz Weight: 32.5 kg Note: The console shown in the picture is not included in the scope of delivery! Location: Hochheim Availability: Immediate