JSM RC Advanced širokopasovni brusilni stroj

HEESEMANN

Stanje: rabljeno, Leto izdelave: 1997, Used machine Hfodpfx Abjyulfmj Ejd Year of manufacture: 1997 1 belt sanding machine with combination unit with electronic segmented pressure beam for sanding soft and hard veneers calibrating and fine sanding of solid wood calibrating workpiece carrier panels sanding of faulty veneers and coatings intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings sanding of blocking foils with graphical operator terminal NC-controlled thickness adjustment from 3 to 150 mm calibrating roller can be activated via terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm sanding width: 1100 mm sanding belt length: 2150 mm sanding belt speed, frequency-controlled, approx. 2–18 m/sec sanding unit drive: 15 kW feed speed: 5/10 m/min air pressure: 6 bar air consumption: 15 NL/min belt blow-off: 490 l/min extraction port: 180 mm air requirement, sanding unit: 1800 m³/h required air velocity: 20 m/sec total power connection: approx. 17 kW weight: approx. 2000 kg dimensions (W x D x H): 1840 x 1670 x 2200 mm the machine will be supplied with a new feed belt availability: short-term location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of Manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with corner transfer Consisting of: 1. Infeed conveyor, length 3,050 mm 2. Open space for sanding machine (optional) 3. Automatic spray machine VEN SPRAY PERFECT, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm Hsdpfxju Afu Rj Ab Ejfd 5. Jet dryer VEN DRY AIR JET, length 4,160 mm 6. 180-degree corner transfer with jet dryer 7. Supply air system for corner transfer, 25,000 m³/h 8. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 9. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 10. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Discharge area, belt of UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, skupna masa: 4.200 kg, Fine Finishing and Smoothing Sander Heesemann, Type: FGA 6 For intermediate lacquer sanding, wood smoothing, and sanding of films/foils The machine is fully operational, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: Equipped with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off device Feed speed: 4.5 – 22 m/min infinitely variable Aggregates Brush roller unit: Centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit: - Stepless, electronic regulation of the belt speed via frequency inverter - Maintenance-free brake system - Pneumatic belt tensioning - Intermittent belt cleaning device - Infrared belt control - Belt operates in counter-rotation Abrasive belt dimensions: 2620 x 1350 mm Abrasive belt speed: 0.3 – 12 m/s Drive power: 11 kW Graphical operating terminal for input of machine settings, including numeric thickness adjustment, disturbance indication, workpiece feed, and feed speed display Electronically controlled pressure beam Distance between guide rollers: 40 mm Pneumatic belt tensioning The pressure beam contact surfaces automatically adjust to the shape of the passing workpieces Workpiece suction clamping system: Fan with 5.5 kW drive power Operating side and terminal: Left Hedpfx Ajya I Iusb Ejfd Operating voltage: 400 V; 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Subject to technical changes, errors, and prior sale)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, skupna masa: 5.500 kg, delovna višina: 880 mm, Wide belt sander with cross and longitudinal sanding units for sanding, including veneer, prior to lacquering. The machine is fully operational, well-maintained, and is in excellent technical condition. The conveyor belt has been replaced. - Sanding width: 1300 mm - Working height: 880 mm constant - Workpiece thickness max.: 3–140 mm - Conveyor table with individual conveyor belts - Drive: 3.0 kW three-phase motor, incl. blow-off unit - Feed speed: 4.5–22 m/min adjustable - Units: Cross/Longitudinal/Brush - Brush roller unit, centrally height adjustable - Diameter: 150 mm - Drive power: 1.5 kW - Bristle material: Fibre 1. Cross sanding unit: - Wear-free brake system - Pneumatic belt tensioning - Belt tracking monitoring - Pressure lamella belt system, intermittent belt cleaning unit - Sanding belt dimensions: 4900 x 150 mm - Belt speed: 12 + 24 m/s - Drive power: 13 / 17 kW 2. Longitudinal sanding unit: - Infinitely variable, electronic adjustment of sanding belt speed via frequency inverter - Wear-free brake system Hfsdpfxoya I Rij Ab Eed - Pneumatic belt tensioning - Intermittent belt cleaning unit - Belt control via infrared - Sanding belt operates counter to feed direction - Sanding belt dimensions: 2620 x 1350 mm - Belt speed: 0.3–12 m/s - Drive power: 11 kW Graphic operator terminal for machine settings input, incl. numerical thickness adjustment and display of sources of faults, workpiece passage, and feed speed - Electronically controlled pressure beam - Distance between control rollers: 40 mm - Pneumatic belt tensioning - The contact surfaces of the pressure beam automatically adjust to the shape of passing workpieces - Weight: approx. 5,500 kg - Space requirement: approx. 2550 x 2675 x 2400 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, I am selling a vertical throughfeed CNC machining center Vitap Point K2 2.0. Year of manufacture: 2019 Configuration: - 1 pc. milling spindle 5.0 kW - 12 + 4 + 4 pcs. drilling spindles - 1 pc. grooving saw Return conveyor returns the workpieces either back to the operator or to the rear of the machine for throughfeed operation. Maximum workpiece size: x 1250 x 50 mm Minimum workpiece size: 270/400 x 185 x 4 mm Overall dimensions: 2900 x 1650 mm Total weight: 950 kg Hfjdpsvx Dz Dsfx Ab Ejd Comes with full documentation and CE certification. Very good condition. Available immediately.

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Ta linija za proizvodnjo lesa HEESEMANN BÜRKLE je bila izdelana leta 2001. Opremljena je s celovito linijo za nanašanje olja, ki vključuje vakuumski podajalnik RBO Tornado SC 1300, HEESEMANN MFA 8 s prečnimi in vzdolžnimi ščetkami ter valjčne nanašalne stroje BÜRKLE SLC 1400. Leta 2024 je bila nadgrajena z novim Siemensovim krmilnim sistemom. Izkoristite priložnost za nakup te linije za proizvodnjo lesa HEESEMANN BÜRKLE. Kontaktirajte nas za več informacij. Vrste aplikacij: Celovita proizvodnja Hjdpfex D Rh Rsx Ab Esfd

Stanje: rabljeno, Leto izdelave: 2001, Abrasive belt length 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Cross belt version 1st unit cross belt pad: Electronic segmented pad Abrasive belt width 1st unit: 150 x 4800 mm Drive 1st unit: kW 2nd unit: Longitudinal roller 2nd unit version: Steel calibration roller Abrasive belt length 2nd unit: 2150 mm Abrasive belt width 2nd unit: 1350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: Pad unit 3rd roller version: electronic segmented pressure beam SDS system Pad 3rd unit: electronic segmented pads, 32 mm width Abrasive belt length 3rd unit: 2150 mm Abrasive belt width 3rd unit: 1350 mm Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor: Yes Hfsdoxzi S Nspfx Ab Esd Feed speed, fixed: infinitely variable 5 - 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electric Infeed height: variable (lower table travels) Table adjustment: electro-motorized Table display: digital Working height or feed table height: 880 mm Location: Nattheim

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Hodpfx Abshlp Efo Eofd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Širokopasovni brusilnik HEESEMANN KSM 8 CSD vklj. z EA2 Hfodpfx Aex N A Aaob Esd Leto izdelave: 1994 Stanje: rabljeno - takoj pripravljeno za uporabo Oznaka Širokopasovni brusilnik Stanje: funkcionalno preizkušen – Delovna širina 1300 mm – Prečni brusilni agregat z napravo za izpihovanje traku – Vzdolžni brusilni agregat z brezstopenjsko nastavljivo hitrostjo in napravo za izpihovanje traku – Kalibrirni valj, vklop preko krmiljenja – Vakuumski transportni trak – podajalna hitrost brezstopenjsko nastavljiva – Satinirni valj – Krtačni valj – Nastavitve stroja in sistem regulacije pritiska CNC krmiljeno - EA-odsesovalni stroj Visokotlačna izpihovalna naprava z vrtečimi se šobami in ionizacijo za statični prah Lokacija: na lokaciji pri stranki - takoj na voljo - Stranka mora stroj sama razstaviti.

Leto izdelave: 2002, stanje: rabljeno, številka stroja/vozila: 200212102, Technical Data: - Manufacturer: Heesemann - Model: EA4 - Year of manufacture: 2002 - Working width: 1,300 mm - Working height: 880–920 mm - Roller conveyor, rubber-coated rollers - Roller pitch: 65 mm - Roller diameter: 60 mm - Fine dust filter Arrangement of the dedusting modules (viewed in feed direction): 1) Air jet channel, 1 unit from below 2) Ionization from below Hfedjyffrnopfx Ab Eed 3) Air jet channels, 2 units from above (with separate fan, no compressed air required) 4) Ionization bar from below and above Installation dimensions: - Installation length: 830 mm - Width: 2,245 mm - Height: 1,470 mm - Extraction nozzle: D 160 mm - Height adjustment: motorized - Without control system (optionally, a new control system can be offered) - Location: Blomberg warehouse Photo 1, for reference only

Stanje: novo, Leto izdelave: 2026, Engine power 5 HP Blade diameter 250 mm Blade speed (rpm) 5300 Automatic pneumatic movable table Galvanized iron and polyethylene supports √ Maximum horizontal cutting length 4200 mm Hsdpeu Rqq Hsfx Ab Esfd Maximum vertical cutting height 2200 mm Maximum horizontal cutting height 2080 mm Maximum cutting depth 60 mm

Stanje: rabljeno, Število brusilnih agregatov: 4 kos Brusilna širina: 1.300 mm Maksimalna brusilna višina: ca. 140 mm Frekvenčno krmiljen večnamenski avtomat za površinsko brušenje ali 2-pasni križni brusilni avtomat Heesemann MFA 8 za brušenje ploščatih lesenih materialov in/ali lakiranih obdelovancev (vmesno brušenje laka) z vakuumskim transporterjem in velikim kompletom brusnih trakov. Hsdpfx Asxr N I Eob Eofd Agregat 1: Elektronska pritisna letev Agregat 2: Prečno brušenje Agregat 3: Vzdolžno brušenje Agregat 4: Čistilna krtača

Stanje: rabljeno, Leto izdelave: 1998, Used machine Year of manufacture: 1998 1 belt sander with combination unit with electronic segmented pressure beam for sanding soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier boards Sanding of defective veneers and lacquers Intermediate sanding of PU, hydro, UV, nitro, and polyester lacquers Sanding of barrier films with graphical control terminal NC-controlled thickness adjustment from 3–150 mm Activation of the calibration roller via terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency-controlled: approx. 2–18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min With belt emission: 490 l/min Extraction port: 180 mm Hedox Rpghepfx Ab Eefd Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total electrical connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm The machine will be supplied with a new feed belt Availability: upon agreement Location: Röllbach

Stanje: novo, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: Frequenzgesteuert Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtmotorleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querantriebsmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Hsdpfx Absdmi Nis Eefd Vorschubantrieb: 2,2 kW Heben-/Senkmotor: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Tischhöhenverstellung: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Gewicht: 4200 kg

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)), Diameter: 250 mm Belt speeds: approx. 18 m/s, 22 kW Anti-wear brake unit, automatic length adjustment Dust extraction device controlled according to the workpiece; reverse-running abrasive belt; abrasive grain compensation via computer. Hsdpfx Ajx Rdn Tob Eofd Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Incl. stepless sanding speed adjustment via electronic frequency controller, with double quantity of suction holes for the dust extraction device. Anti-wear brake unit, automatic adjustment for varying abrasive belt edge lengths, dust extraction device controlled depending on the workpiece, switchable, reverse-running abrasive belt. 2 Pressure beams with selective pressure regulation system – CSD® system Continuously adjustable pressure of individual pressure elements, for both single and multiple feed. Distance: 32 mm. Part tolerance compensation up to 2 mm by maintenance-free pressure magnets. Working width as well as start and end of sanding on the pressure beam are electronically controlled. The pressure elements are actuated by electro-lifting magnets, allowing the sanding shoe pressure to be infinitely variable as the workpiece passes through the machine. This innovative CSD® technology ensures always consistently proportional pressure depending on the shoe’s overlap on the workpiece. The risk of edge-through (“burn through”) is almost eliminated thanks to this continuous dynamic pressure control.