Širokopasovni brusilni stroji Heesemann EH 51.11

Heesemann EH 51.11

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Dkodjgtm U Ajpfx Aplel Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!) Dkodpfjwyda Usx Aplsl

Stanje: rabljeno, Leto izdelave: 2000, rabljeni podajalnik Dedpfx Apoumpp Eelskl Letnik izdelave: 2000 primeren za robno brusilko Kündig Uniq Tehnični podatki: maks. izpust: 1050 mm število podajalnih valjev: 4 premer valja: 120 mm širina valja: 60 mm hod vzmeti valjev: 25 mm število stopenj hitrosti: 8 (2/4/5,5/6,5/11/13/16,5/33 m/min) motor: 0,75 kW napajanje: 400V/50 Hz teža: 32,5 kg konzola, prikazana na sliki, ni vključena v dobavo! Lokacija: Flörsheim Dobavljivost: takoj

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.300 mm, višina brušenja: 160 mm, vrsta nastavitve višine: električni, dolžina brusnega traku: 2.150 mm, Heesemann JSM 1350 RC Wide Belt Sander Year of manufacture: 2025, new machine, currently the only exhibition unit available in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units with separate motors and infinitely variable belt speeds up to 18 m/s - Table extensions at infeed and outfeed - Industrial PC 15.6" - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration return roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System (EMS) - Doors with glass inserts - LED lighting inside the machine - Vacuum table prepared (bored) for connection of the vacuum blower - Vacuum blower (integrated in the machine) - Workpiece cleaning with oscillating air jet pipe - CSD (magnetic pressure beam) The machine is connected and can be inspected on site by appointment. If you have any questions, please do not hesitate to contact us. Dodpfxowcqr Aj Aplekl

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Stair Routing Machine SELECT 20800 for mortising treads and risers into stair stringers and posts. The machine is equipped with stops for tread length, tread thickness, riser length, riser thickness, and nosing dimension. Both a tread and a riser can be routed in a single setup in approx. 1 minute. Clamping the workpiece takes just one second. This machine is the ideal solution for professional staircase manufacturers. Dkjdpswut Abofx Apljl Voltage: 3-phase, 400 V Maximum clamping height: 300 mm.

Stanje: rabljeno, Leto izdelave: 2001, Širina udarne stene: 4000 mm Višina udarne stene: 1000 mm Zunanje dimenzije: 4600 x 1500 mm 2 x 1,5 kW motorja Skupni nazivni volumenski pretok: 7000 m³/h Odsesovalni priključki levo in desno s premerom 300 mm Lokacija skladišča: Garbsen Dkodpfevvizkjx Aplsl

Stanje: dober (rabljeno), Koda: 0749 Blagovna znamka: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Avtomatski brusilni stroj za delovne pulte, pohištvo, panele, mize Tehnični podatki: Delovna širina: 1300 mm Maksimalna delovna debelina: 130 mm Minimalna delovna debelina: 1 mm Sestava: 1. Prečna brusilna tračna enota – motor 15 KM – elektronski regulator hitrosti z zaslonom 2. Prečna brusilna tračna enota – motor 15 KM – elektronski regulator hitrosti z zaslonom Dimenzije prečnega brusilnega traku: 1350 x 150 mm Dimenzije Chevron traku: 5510 x 140 mm Djdpfx Apjh T Dzqslokl Zračni izpihovalci za trakove Hitrost pomika traku: 5–25 m/min Fiksna miza in premična glava za enostavno vključevanje v proizvodno linijo Rotacijski izpihovalci za čiščenje panelov Vakumska miza Krtača za čiščenje traku Dovozni valjčni transporter Vgrajena moč: 32 kW Stisnjen zrak: 7 bar Priključki za odsesavanje: 2 x Ø 200 mm, 2 x Ø 150 mm, 2 x Ø 100 mm Skupne mere (DxŠxV): 4400 x 2500 x 1600 mm Teža: 5000 kg

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Dkodpfx Apsfxpbmslel

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Dkedpfxogf Sw Nj Aplel Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen,