Stroj za robne trakove

IMA Combima

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips / banding (min/max) mm: max. 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof enclosures FORMATTING UNIT (for each side): Pre-milling cutter 75.186 (1 x 4.4 kW) Planing unit (2 x 6.6 kW) + spare position EDGE BANDING SECTION (for each side): Infrared heating for workpiece edge pre-warming Gluing unit (hot melt adhesive) 04.1570 Pressure zone + edge magazine for rolls (compartment no.) 2 End trim saw 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Bodpjwz Ic Aofx Altjwr Pre-milling unit 08.0555 (1 x 0.66 kW) Multifunction unit (radius milling and profile trimming) MFA 08.342 (2 x 0.66 kW) SERVO Max 20 m/min Profile scraping unit 08.519 Flat scraping unit 08.50 Spraying unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving/rebating and profiling: 75.30 (2 x 4.4 kW)

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films Bwsdpfx Alsilqvrotsr

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.4 / 1 Roll material (edge) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control system / Software: ICOS Open (Windows XP) Feed speed (adjustable) m/min: 10 – 50 Bjdpfxjyypi Us Altowr No transmission bar (Master & Slave systems) SIZING UNIT (per side): Sprayer unit (for liquid non-stick agents) Milling unit (2 x 8 kW) EDGE PROCESSING UNIT (per side): Gluing station (hot melt glue + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no.): 6 Servo-drive guillotine shear (for cutting the edge material) Pressure zone (CNC-controlled) Premilling unit 08.055 (2 x 1 kW) 0°-30° Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.617-2 (2 x 0.18 kW) Sprayer units (for polishing fluid) Universal milling unit for grooving, rebating, and profiling – 08.190 (1 x 4.5 kW) 0°-90° / 180°-270°

Stanje: delavnici obnovljeno (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a processing line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips/bands (min/max): 0.4 / 1 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open (Windows XP) Without transfer rail (Master & Slave systems) Feed speed (adjustable) m/min: 7 - 35 Cam spacing (mm): 270 FORMATTING (for each side): Spraying unit (for liquid anti-adhesive) Jointing milling unit - 08.379 (2 x 4 kW) EDGE PROCESSING (for each side): Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Pressure zone (CNC-controlled) + edge magazine for rolls (No. 6 positions) End trimming unit 08.42/30/B (2 x 0.66 kW) max 30 m/min Milling unit 08.055 (1 x 2 kW) 0°-30° Contour trimming unit (for fine trimming) CNC-controlled KFA 30 (1 x approx. 0.5 kW) 30 m/min Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-2 (2 x 0.18 kW) Bjdpfxeyyya Dj Altswr

Leto izdelave: 2022, obratovalne ure: 400 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of Manufacture: 2022 Operating Hours: approx. 400 hrs Location: D 84069 Schierling Availability: short-term Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 spacing: 36 mm Screen deck 2 spacing: 24 mm - Pre-screen deck with long hopper and variably adjustable dosing roller - Volume measurement via loading - Preparation for air separator - Compressor Bwodpfort Uvzex Alter - LED lighting package - Remote control for all key settings via radio - Diesel-electric drive 80 kW - Axle leveling system - Twin axle, approved for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, general waste, RDF, various recycling materials (not suitable for construction debris or excavated material) Miscellaneous: Very good used condition, fully operational

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a processing line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/software: ICOS Open (Windows based) Without transfer rail (Master & Slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins "Hopper" (panels fall directly onto the motorized caterpillar chains) Cam distance (mm): 270 FORMAT PROCESSING (for each side): Spraying unit (for liquid nonstick agent) Bwjdpeum Untefx Alter Pre-milling cutter 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Free space EDGE PROCESSING (for each side): Gluing unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Milling unit 08.055 (2 x 0.66 kW) 30 m/min Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: zelo dobro (rabljeno), 4-sided SIZING AND EDGE BANDING LINE + THROUGHFEED BORING MACHINE Consisting of the following machines: A) "IMA" loading system (bridge design) with double pick-up station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for supplying panel stacks to the loader. B) 1st double-sided sizing and edge banding machine "IMA" model Combima/N/II/230/A/R3 (mm 1300) C) Panel turner (from longitudinal to transverse orientation) "IMA" D) 2nd double-sided sizing and edge banding machine "IMA" model Combima/II/740/B/R3+ (mm 3300) with KFA 30 (contour trimming unit for fine trimming) E) Throughfeed boring machine "IMA" model I-Magic (with 2 horizontal and 4 lower vertical boring supports) Bwodpfxoyyb Sus Altsr F) Motorized roller conveyor "IMA" G) Panel turner (from transverse to longitudinal orientation) "IMA" H) "IMA" stacking system (bridge design) with double stacking station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for transporting panel stacks away from the unloader.

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 Bwodpfxegwbbqo Alter No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edgebanding material (coils) thickness (min/max) mm: 0.3 / 3 – Edgeband thickness in strips / tapes max mm: 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control/Software: ICOS Open (Windows based) Feed speed (adjustable) m/min: 10 - 50 (Master & Slave) Protective and noise reduction cabins FORMATTING SECTION (for each side): Pre-milling cutter (pre-milling) 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Max 35 m/min Jointing milling unit 75.186 (1 x 4.4 kW) EDGEBANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) VTG 3-24 + 283.203 Pressure zone + edge magazine for rolls (slot no. 24) End trimming unit 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling/milling unit 08.055 (2 x 1 kW) 0°-30° (30 m/min) Multifunctional unit (radius & contour milling unit) MFA 08.342 (2x0.66 kW) SERVO Max 20m/min OPTIONAL: KFA 30 Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing liquid) Bwsdpfxsxggzls Altsr Buffing unit 08.604 (0.25 kW x 4) 2 x standard milling units for grooving/rabbetting (1x left + 1x right) 08.190 (4.5 kW x2) 90°/180°/270°

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: 13304, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 45 mm, širina obdelovanca (maks.): 1.300 mm, dolžina obdelovanca (maks.): 2.250 mm, največja debelina roba: 3 mm, vrsta aktuacije: električni, skupna dolžina: 10.000 mm, skupna širina: 8.500 mm, Oprema: CE označba, dokumentacija / priročnik, Ponujamo dvostranski robni lepilni stroj IMA COMBIMA I K/II/R75/760/V/R3 iz leta 2000, ki slovi po svoji zanesljivosti in učinkovitosti pri profesionalni obdelavi robov. Ta model obdela obdelovance debeline od 10 do 45 mm in širine od 270 do 1300 mm, kar zagotavlja vsestranskost pri delu z različnimi materiali. Hitrost pomika je od 6 do 30 m/min, kar omogoča učinkovito proizvodnjo ob ohranjanju visoke kakovosti. Naprava obvlada robove debeline 0,7–3 mm in elemente dolžine od 270 do 2250 mm, zato je idealna rešitev za zahtevne industrijske aplikacije. Je zanesljiva izbira za delavnice, ki iščejo preverjene stroje v dobrem tehničnem stanju. Stroj ima novo krmiljenje znamke Beckhoff. Bsdezgb A Depfx Altowr Možen je tudi nakup celotne linije, skupaj z valjčnim transporterjem, opremljenim s stožčnim obračalnikom, in z dvo-komorno avtomatsko nakladalno postajo.

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Bwodpfjuc Idxox Alter Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Cutting system for thin panels

Stanje: rabljeno, številka stroja/vozila: 005854, Tip pritrjene obrobe: tanka obroba, močna obroba Sistem lepljenja: EVA Multifunkcijska enota: da Stroji za lepljenje obrob: stroj 1 in 2 Maks. širina panela: 3300 mm Maks. podajalna hitrost: 30 m/min Bwodpfxjv Hinxs Altjr Delovni agregati, desna stran: 11 kos Delovni agregati, leva stran: 11 kos

Stanje: rabljeno, številka stroja/vozila: 007514, Pozicija 1: Transfer IMA-COMBIMA SYSTEM I Pozicija 2: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 3: Transfer IMA-COMBIMA SYSTEM I Pozicija 4: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 5: Transfer IMA-COMBIMA SYSTEM I Pozicija 6: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 7: Transfer IMA-COMBIMA SYSTEM I Pozicija 8: Robilnik LottoUno IMA-COMBIMA SYSTEM I Bjdpfx Alswukznetjwr Pozicija 9: Transfer IMA-COMBIMA SYSTEM I

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 2212.287, Automatická rozřezávací pila na panely Schelling Typ: FH 6 430 Výrobní číslo: 221.287 Rok výroby: 2011 Automatická podélná pila na panely Schelling se zadním automatickým nakládáním a zvedacím stolem. Pro dělení deskových materiálů: DTD, MDF, překližka, lamino, apod. Technické informace: - Software: MCS Evolution 2.0, SPS, Soft-SPS Siemens WinAC - Operační systém: WINDOWS XP - PC s klávesnicí a myší - TFT monitor 17" - Délka řezu: 4300 mm, automatická detekce začátku desky - Šířka řezu: 4300 mm - Přesnost řezu na délce 3 m: +/-0,1 mm - Polohovací přesnost na vstupu: +/-0,1 mm - Max. průměr hlavního pilového kotouče: 460 mm, vřeteno 30 mm - Předřezový kotouč: 200 mm, vřeteno 20 mm, ovládání motoru z řídicího pultu - Max. tloušťka panelu: 120 mm - Zarovnávač stohu panelů - Motor hlavní pily: 27 kW - Výška pilového kotouče nad stolem: 135 mm - Bezpečnostní clona - Stůl se vzduchovým polštářem - 3 ks vzduchových trysek, radiální ventilátor - Rozměry stolů: 2650x850 mm, 620x850 mm, 2650x2550 mm - Přítlačný nosník s automatickým nastavením tlaku podle délky a výšky řezu balíku - Zarovnání balíku před a za přítlačným nosníkem - Max. výška balíku: 120 mm (včetně součtu průhybu a tolerance tloušťky) - Podavač s 12 chapadly - Max. otevření chapadla: 133 mm - Min-max síla zarovnávače balíku: 400/2000 N - Rychlost vozíku pily vpřed: 6-150 m/min - Rychlost vozíku pily zpět: 150 m/min - Rychlost posuvu (podavač) do 25 m/min (dle EC Europa EN1870-13), ostatní země až 80 m/min - Rychlost posuvu zpět: až 80 m/min - Odsunutí panelu: 3 ks - Rozměr zvedacího stolu (d x š): 4350x2550 mm - Hydraulická jednotka - Standardní zvedací výška: 1600 mm - Rychlost zvedání: 1,25/2,5 m/min – rychlost spouštění: 1,25/5 m/min - Max. zatížení: 1200 kg/m2, celkem až 9 t - Válečková dráha s motorovým pohonem a frekvenčním řízením pro stoh na zvedacím stole: 4100x2600 mm - Max. hmotnost stohu: 6500 kg - Max. délka stohu: 1060 mm - Otvory pro vidlice VZV: 4 ks, vzdálenost uprostřed 1200 mm, šířka otvoru 300 mm Bodpfx Aljtk It Sstowr - Ochranná světelná clona - Válečkový dopravník – poháněný, frekvenčně řízený pro vstup balíku vlevo na zvedací stůl: 5600x2600 mm, max. zatížení 6500 kg - Válečkový dopravník – poháněný, frekvenčně řízený pro vstup balíku vpravo na zvedací stůl: 5600x2600 mm, max. zatížení 6500 kg - Otvory pro vidlice VZV: 2 ks, vzdálenost středů 900 mm, šířka otvoru 400 mm - 2 dorazy s válečkem pro zarovnání stohu - Dvojitá ochranná světelná clona - Válečkový stůl za pilou do hloubky 4300 mm, volně běžící polyamidové válečky - Úhlový doraz na válečkovém stole - Vstupní vedení dvoukolejnicového typu (délka nosníku 7200 mm), dvoustranné kalené přesné vedení - Pastorkový pohon, oboustranný - Vstupní vozík (podavač) s pastorkovým servopohonem, bezkontaktní měřicí systém - Chapadla (nůžkové upínače) v podavači: 12 ks - Automatická adaptace upínací síly na výšku balíku (progresivní upínací síla) – možnost nastavení na 0 - Podavač pro desky tloušťky větší než 6 mm, materiál tenčí než 6 mm podáván ručně - Centrální čisticí systém v podavači - Stlačený vzduch 6–8 bar, cca 1600 l/min - Výkon 38 kW, 70 A, 3x400 V, 50 Hz, ovládací napětí 24 VDC - Odsávání: 4000 m³/h, rychlost vzduchu 30 m/s - Průměry napojení: 80 mm (úhlový vývod), 120 mm (přítlačný nosník), 150 mm (kanál pilin) - Celková zástavbová plocha bez poháněných válečkových drah včetně ochranného oplocení cca: 11650x7300 mm - Poháněné válečkové dráhy vlevo/vpravo: 5500+5500 mm - Skladové číslo: 2002125BXACEO Technické údaje jsou pouz

Stanje: rabljeno, številka stroja/vozila: 006017, Pozicija 1: Vertikalno skladišče IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 2: Formatna žaga v kotni izvedbi IMA-COMBIMA SYSTEMS/N/I/R75/1110 Bwedpfxswukzhj Altsr Pozicija 3: Nakladalnik IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 4: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 5: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 6: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 7: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 8: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 9: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 10: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 11: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 12: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110