Dolge police za blago

GUSTOS D-5-3000-D

Stanje: novo, Load capacity (rack): 10,000 kg Load capacity per level: 2,000 kg Number of storage levels: 5 pcs. Recommended material length: 6,000 mm Upright spacing: 3,000 mm Rack height: 2,440 mm Dimensions (L x W x H): 3.8 x 0.9 (1.35) x 2.45 m The most suitable solution for storing long materials with 2 uprights. - Each shelf can be swung outwards, allowing loading and unloading with an overhead crane at any time. Njdpfx Aofgygzeltswi - Single-sided design.

Stanje: rabljeno, Leto izdelave: 1998, Bore diameter: 90 mm Stroke: 490 mm Throat depth: 400 mm Total power requirement: 10 kW Machine weight approx.: 3,500 kg Space requirement approx.: m KADIA Vertical honing machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial No.: 50 / 1790 ----- Max. honing diameter: 10 – 90 mm Max. honing depth: 30 – 450 mm Max. spindle stroke: 490 mm Nsdpfxst Hw T Se Altjwi Spindle throat depth: 400 mm Installation height under spindle nose (top): approx. 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Infinitely variable spindle speeds: 160 – 830 rpm Infinitely variable stroke speed: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW – 400 V – 50 Hz Weight approx.: 3,500 kg Total machine height approx.: 4,000/3,300 mm Accessories / Special features: • Machine equipped with a PLC control SIEMENS S 5 / Unipos 4.0 for input of all important honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With a fixed table 600 x 400 mm • Automatic shutoff after a specific, preset time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feeding head ESZ 90/1 D • Separate hydraulic system, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Condition: Good to very good – ready for demonstration Delivery: Ex stock – as seen here Payment: Strictly net – upon receipt of invoice

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), 1 used short bar feeder Manufacturer: Breuning Model: ILS RBL 80/12 Nedpfx Aloht Rl Ejtswi Year of manufacture: 2016 Clamping range: 5–80 mm diameter Bar length: 100–1200 mm

Stanje: rabljeno, Gear milling cutter Module 8 Nwjdsdklt Nepfx Altji 20 degrees Length: 1800 mm Diameter: 120 mm Bore: 40 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: Nedpfoh Ek Dasx Altowi - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 15.208 h, potovalna razdalja osi X: 730 mm, pomik osi Y: 730 mm, pomik po osi Z: 880 mm, skupna masa: 12.000 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 21.000 W, število osi: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and travel distances of 730 mm in the X and Y axes, with a Z-axis travel of 880 mm. The machine is equipped with a robust 500 x 500 mm pallet size and a tool capacity of 40 tools. If you are looking for high-quality machining capabilities, you should consider the DMG MORI NHX 5000 horizontal machining center that we have for sale. Contact us for further details. Nwjdpfx Aljyt Hwzstsi • Spindle torque: 111 Nm (continuous 85 Nm) • Tool holder: BT40 • Tool capacity: 40 tools (optional magazine for 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B-axis: direct drive, indexing 0.001°, max. speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measurement system; linear scale standard • Control: CELOS Siemens 840D sl with 21.5" ERGOline multitouch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw measuring probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling • Application tuning cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Circuit protection: 125 A • Short-circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating hours: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll flow monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 2.963 h, Funkcionalnost: popolnoma funkcionalen, DONNÉES TECHNIQUES - Nombre de broches : 2 BROCHE PRINCIPALE - Diamètre maximum de la barre : 42 mm - Course de déplacement : 100 mm - Vitesse de broche : 6 000 tr/min - Puissance moteur de broche : 7,5 / 5,5 kW - Résolution minimum de l’axe C : 0,001° CONTRE-BROCHE - Diamètre maximum de la barre : 34 mm - Vitesse de broche : 5 000 tr/min - Puissance moteur de broche : 5,5 / 3,7 kW Nwjdpfx Asw Igyrsltsi - Résolution minimum de l’axe C : 0,001° - Nombre de tourelles : 2 TOURELLE SUPÉRIEURE - Nombre de positions : 8 - Course X : 140 mm - Course Z : 235 mm - Course Y : 70 mm (+/-35 mm) - Vitesse des outils entraînés : 5 000 tr/min - Puissance des outils entraînés : 1,0 kW TOURELLE INFÉRIEURE - Nombre de positions : 6 - Course X/Z : 140 / 310 mm ALIMENTATION ÉLECTRIQUE - Puissance totale requise : 30 kVA POIDS ET DIMENSIONS - Encombrement : 2 220 x 1 460 mm - Hauteur de la machine : 1 700 mm - Poids de la machine : 3 100 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 11.700 h, moč: 8,9 kW (12,10 KM), potovalna razdalja osi X: 700 mm, pomik osi Y: 400 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 27.000 obr/min, Stroj se uporablja za fino obdelavo manjših kosov. (Al, jeklo) Nwjdpfxoq N Ayfe Altoi

Stanje: zelo dobro (rabljeno), Welding positioner Focker Strähler 8 tons - Load capacity: 8,000 kg - Equipped with hand and foot remote control - Infinitely variable speed and tilt adjustment - Rotation speed: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height (tilted to center): 1,170 mm - Height (horizontal): 1,400 mm - Length: 2,400 mm - Width: 1,500 mm - Condition: visually and technically impeccable, runs very quietly Nwodpfx Aof Ezdnjltei

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Nsdpfjmhhypex Altewi Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.