Gustos D-5-3000-D nakup rabljenega (88.853)

Stanje: novo, Nosilnost regala: 20.000 kg Nosilnost na nivo: 2.000 kg Število nivojev: 2 x 5 kosov Priporočena dolžina materiala: 6.000 mm Razmak med stebri: 3.000 mm Tjdpfx Aefgyg Tjltsa Višina regala: 2.440 mm Najprimernejša rešitev za shranjevanje dolgih materialov z 2 stebri. - Vsak predal je izven pomičen, kar omogoča natovarjanje in raztovarjanje z mostnim dvigalom kadarkoli. - Dvostranska izvedba.

Stanje: novo, Load capacity (rack): 10,000 kg Load capacity per level: 2,000 kg Tsdpfx Alsfgygzjtoa Number of storage levels: 5 pcs. Recommended material length: 6,000 mm Upright spacing: 3,000 mm Rack height: 2,440 mm Dimensions (L x W x H): 3.8 x 0.9 (1.35) x 2.45 m The most suitable solution for storing long materials with 2 uprights. - Each shelf can be swung outwards, allowing loading and unloading with an overhead crane at any time. - Single-sided design.

Stanje: novo, Nosilnost regala: 28.000 kg Nosilnost na nivo: 2.000 kg Število skladiščnih nivojev: 2 x 7 kos Priporočena dolžina materiala: 6.000 mm Razmak med stebri: 3.000 mm Višina regala: 2.440 mm Mere D x Š x V: 3,7 x 2,55 x 2,4 m Todpfx Aefgyhaoltea Najprimernejša rešitev za skladiščenje dolgih materialov z 2 stebroma. - Vsak regalni predal je izmenljiv navzven, kar vedno omogoča nakladanje in razkladanje s halnim žerjavom. - Dvostranska izvedba.

Stanje: novo, Nosilnost regala: 20.000 kg Nosilnost na nivo: 2.000 kg Število nakladalnih nivojev: 2 x 5 kos Priporočena dolžina materiala: 3.000 mm Razmak med stebri: 1.500 mm Višina regala: 2.440 mm Najprimernejša rešitev za skladiščenje dolgih materialov z 2 stebroma. Tjdsfgyhfepfx Altea - Vsak predal se lahko izmakne navzven, tako je nakladanje in razkladanje s halnim žerjavom vedno mogoče. - Dvostranska izvedba.

Stanje: novo, Nosilnost regala 10.000 kg Nosilnost na raven 2.000 kg Število nakladalnih ravni 5 kos Priporočena dolžina materiala 3.000 mm Razdalja med stebri 1.500 mm Višina regala 2.440 mm Mere D x Š x V 2,3 x 0,9(1,35) x 2,45 m Todpfefgyg Njx Altja Najbolj primerna rešitev za shranjevanje dolgih materialov z 2 stebroma. - Vsaka polica se lahko zasuka navzven, kar omogoča nakladanje in razkladanje s halnim žerjavom kadar koli. - Enostranska izvedba.

Stanje: novo, Nosilnost regala: 30.000 kg Nosilnost na nivo: 3.000 kg Število nivojev za nalaganje: 2 x 5 kosov Tedpfofgyhbjx Altja Priporočena dolžina materiala: 6.000 mm Razmak med stebri: 3.000 mm Višina regala: 2.440 mm Najprimernejša rešitev za shranjevanje dolgih materialov s 3 stebri. - Vsak predal se lahko zavrti navzven, kar omogoča vedno nakladanje in razkladanje z mostnim dvigalom. - Dvostranska izvedba.

Stanje: novo, Nosilnost regala: 15.000 kg Nosilnost na nivo: 3.000 kg Število ravni nalaganja: 5 kosov Priporočena dolžina materiala: 6.000 mm Razdalja med stojali: 2 x 2.000 mm Višina regala: 2.440 mm Najprimernejša rešitev za shranjevanje dolgih materialov s 3 stebri. Tsdpfsfgyg Eox Altoa - Vsak predal je možno zavrteti navzven, tako da je možno nakladanje in razkladanje z mostnim žerjavom kadarkoli. - Eno-stranska izvedba.

Stanje: novo, Nosilnost regala: 12.000 kg Nosilnost na polico: 2.000 kg Število nakladalnih nivojev: 6 kos Priporočena dolžina materiala: 6.000 mm Razmik med stebri: 3.000 mm Višina regala: 2.440 mm Dimenzije D x Š x V: 3,8 x 0,9(1,35) x 2,45 m Todpjfgyg Aofx Altja Najprimernejša rešitev za shranjevanje dolgih materialov z 2 stebri. - Vsak predal se lahko iztegne navzven, kar omogoča nakladanje in razkladanje z mostnim dvigalom kadarkoli. - Enostranska izvedba.

Stanje: novo, Load capacity of rack: 14,000 kg Load capacity per level: 2,000 kg Number of load levels: 7 pcs. Recommended material length: 6,000 mm Frame width: 3,000 mm Rack height: 2,440 mm Dimensions (L x W x H): 3.8 x 0.9 (1.35) x 2.45 m The ideal solution for storing long materials using 2 uprights. - Each compartment can be swung outward, allowing for loading and unloading with an overhead crane at any time. - Single-sided design. Tsdpfefgyg Djx Altja

Stanje: novo, Load capacity rack: 24,000 kg Load capacity per level: 2,000 kg Number of loading levels: 2 × 6 units Recommended material length: 6,000 mm Upright distance: 3,000 mm Rack height: 2,440 mm Dimensions (L × W × H): 3.7 × 2.55 × 2.4 m Tedpfx Alefgyg Ustja The most suitable solution for storing long materials with 2 uprights. - Each compartment can be swung outwards, allowing loading and unloading with an overhead crane at any time. - Double-sided design.

Stanje: novo, Nosilnost regalnega sistema: 24.000 kg Tedpfxjfgyhgo Altsa Nosilnost na nivo: 2.000 kg Število nakladalnih nivojev: 2 x 6 kosov Priporočena dolžina materiala: 3.000 mm Razmak med stebri: 1.500 mm Višina regala: 2.440 mm Najprimernejša rešitev za shranjevanje dolgih materialov z 2 stebroma. - Vsak predal se lahko zasuče navzven, kar omogoča natovarjanje in raztovarjanje z mostnim dvigalom kadarkoli. - Dvostranska izvedba.

Stanje: novo, Nosilnost regala: 14.000 kg Nosilnost na nivo: 2.000 kg Število nakladalnih nivojev: 7 kosov Priporočena dolžina materiala: 3.000 mm Tsdefgyg Sepfx Altsa Razmak med stebri: 1.500 mm Višina regala: 2.440 mm Dimenzije (D x Š x V): 2,3 x 0,9(1,35) x 2,45 m Najprimernejša rešitev za shranjevanje dolgih materialov z 2 stebri. - Vsaka polica se lahko zasuče navzven, kar omogoča nakladanje in razkladanje s halnim žerjavom kadar koli. - Enojstranska izvedba.

Stanje: novo, Nosilnost regala 28.000 kg Nosilnost na nivo 2.000 kg Tsdpfx Aljfgyhhjtja Število nivojev 2 x 7 kosov Priporočena dolžina materiala 3.000 mm Razmak med stebri 1.500 mm Višina regala 2.440 mm Najprimernejša rešitev za shranjevanje dolgih materialov z dvema stebroma. - Vsaka polica se lahko zasuka navzven, tako da je nakladanje in razkladanje z mostnim žerjavom vedno mogoče. - Dvostranska izvedba.

Stanje: novo, Nosilnost regala: 12.000 kg Nosilnost na nivo: 2.000 kg Število nakladalnih nivojev: 6 kos Priporočena dolžina materiala: 3.000 mm Razmak med stebri: 1.500 mm Višina regala: 2.440 mm Tsdpfx Alofgyg Retea Dimenzije D x Š x V: 2,3 x 0,9(1,35) x 2,45 m Najprimernejša rešitev za shranjevanje dolgih materialov z 2 stebroma. - Vsaka polica se lahko zasuka navzven, kar omogoča nakladanje in razkladanje z mostnim dvigalom kadar koli. - Enostranska izvedba.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, laserska moč: 6.000 W, valovna dolžina laserja: 1.064 nm, dolžina mize: 3.050 mm, širina mize: 1.550 mm, vrsta vhodnega toka: trifazni, skupna masa: 6.500 kg, Oprema: CE označba, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, varnostna svetlobna zapora, skyCUBE XL class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XL class, manufactured by PFEIFER technology in Saxony, Germany, is engineered for your professional cutting applications. It combines next-level productivity with efficiency and precision. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, ensuring the highest level of safety. The ergonomic design with a pull-out worktable makes material loading easy. Drawers in the lower section of the machine are used for collecting cutting remnants. Enhance cut quality and speed even with thick materials thanks to 6kW laser power, including when cutting with compressed air. Switch between materials while maintaining uncompromisingly high cutting quality. With the skyCUBE laser, work with total peace of mind! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all of our laser machines, nothing is more important than complete safety and adherence to the highest standards and regulations. Tjdst A N A Repfx Altoa Special protective windows and a perfectly shielded cutting area reliably protect you from the dangers of laser radiation, while an independent safety system allows loading of materials without interrupting production. Choose the laser power best suited to your requirements—6 kW is our current standard! (* Price depending on configuration and laser power; this is a brand-new laser machine manufactured by us) Maximum dimensions (L × W × H): 2310 × 8505 × 2505 mm / Laser machine 4.0 T Power supply dependent on laser source (6kW): 400V/50Hz, 3-phase / 27 kW Process gas control for: oxygen / nitrogen / compressed air, depending on material and process Laser processing simple and highly precise – high-speed, high-quality laser cutting

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, laserska moč: 12.000 W, valovna dolžina laserja: 1.064 nm, dolžina mize: 1.500 mm, širina mize: 3.000 mm, potovalna razdalja osi X: 1.550 mm, pomik osi Y: 3.050 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, skupna masa: 8.500 kg, trajanje garancije: 24 meseci, potrebna višina: 2.400 mm, zahteva za prostor dolžina: 8.550 mm, delovno območje: 1.500 mm, Oprema: hladilna enota, varnostna svetlobna zapora, XL-Klasse = Bearbeitungsbereich X 1550 mm x Y 3050 mm x Z 150 mm Hochpräzises Linearantriebssystem mit 6–12 kW Laserleistung Doppelt-Wechseltischsystem für Laserbearbeitung auf einer Arbeitshöhe! (* Preisangaben variieren je nach Ausstattung und Laserleistung. Es handelt sich um eine fabrikneue Lasermaschine aus eigener Herstellung) Maximale Abmessungen (L × B × H mit Tisch): 8504 × 2310 × 2400 mm / Lasermaschine 6,5 t + externer Ladetisch 2 t = 8,5 Tonnen Tsdpsr D Nfkjfx Altja Stromversorgung abhängig von der Laserquelle (6 kW): 400 V / 50 Hz, 3-phasig, 27 kW Prozessgasregelung für: Sauerstoff / Stickstoff / Druckluft – je nach Werkstoff und Anwendung Laserbearbeitung einfach und hochpräzise – Laserschneiden mit hoher Geschwindigkeit und Qualität

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, • Travels: X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining: 3000 mm x 1600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning mode • Spindle: 10,000 rpm, HSK 100, 130 Nm spindle torque • Tool changer system HSK 100 / 40 stations for tools up to 750 mm long • Swarf screw conveyors in X-axis, optimized chip removal • Chip conveyor (scraper-type) for transverse discharge, make: Knoll • Coolant supply 900 l, make: Knoll • External air • ICS (internal coolant supply) 60 bar for deep hole drilling • Enclosure with safety glass panels, open top for optimized crane loading • Split sliding doors at the front • Split sliding doors on the operator side • Wireless probing system RMP 60 • Including wash gun • Including platforms on the loading and operator side • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale Tsdszmp E Tjpfx Altoa • Used machine • Y-axis ball screw replaced in September 2021, including bearings • X-axis linear guide and guide carriages replaced in July 2023 • Milling spindle overhauled May 2023 (new clamping set, new clamping cartridge, new rotary feed-through, general inspection performed) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: clamps • Optional: commissioning/installation • Optional: transport • 23,122 total spindle hours • 53,991 total machine hours • Year of manufacture: 2010 Subject to prior sale

Stanje: rabljeno, Leto izdelave: 2005, Mitsubishi Diamond 3000 S -5 je tiskarski stroj, ki ga je Mitsubishi izdelal leta 2005. Ima format 720 x 1020 mm in ima skupaj 300 milijonov odtisov. Trenutno se nahaja v Turčiji in je opremljen s sistemom IPC II Intelligent Press Control, visoko hitrostnimi separatorji, hladilnim in krožnim sistemom, napravo Grafix Digitronic za posipanje pudra, polavtomatskimi SAPC menjalci plošč, nonstop podajalnikom, čistilno napravo za valje, samodejnim napenjanjem ploščnih valjev, avtomatsko čistilno napravo za gumitkanino ter vlažilnim sistemom Mitsubishi Delta. Dobavni pogoji so FCA. Format: 720 x 1020 mm Oprema: napenjanje ploščnih valjev avtomatska čistilna naprava za gumitkanino SAPC polavtomatski menjalec plošč Grafix Digitronic naprava za posipanje pudra čistilna naprava za tiskarske valje Todpfovfxnxex Altja Mitsubishi Delta vlažilni sistem hladilni in krožni sistem nonstop podajalnik IPC II Intelligent Press Control visoko hitrostni separatorji

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Tjdpfx Alovllxdstoa Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, prebijalna sila: 28 t, najv. debelina pločevine: 10 mm, najv. debelina jeklene pločevine: 6 mm, prebojni premer: 105 mm, globina grla: 1.500 mm, Boschert TWIN 1500x3000 Rota-Index Tool quick-change system: TRUMPF Station 1 Rotation with indexing option for Boschert Multitool Max. punching diameter 105 mm, tool infinitely rotatable Station 2 Max. punching diameter 105 mm with Boschert Multitool Revotool option incl. 8-position tool holder Punching force: 280 kN (28 tons) Traverse paths: x-axis 2050 mm (repositioning up to 9999 mm) y-axis 1580 mm Throat depth: 1750 mm Tool system: Trumpf Gr1-3 (105 mm) as well as Boschert Revotool Labod 32060 graphic control / workshop-programmable Tsdpfxsx Tp Rfo Altoa Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90 mm, infinitely programmable upwards and downwards Table width left + right: 2250 mm each Table depth: 3250 mm Table height: 900 mm Total width: 4900 mm Total depth: 4800 mm Total height: 2080 mm Drive power: 20 kVA Machine weight: 15,000 kg Hydraulic oil capacity: 160 l Colour: Blue RAL5017 / Light grey RAL7035 Year of manufacture: 2006 Ball transfer table Slug extraction system Fast hydraulic system Very well-maintained condition With accessories

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, nosilnost: 3.000 kg, Štirismerni viličar za bočno premikanje palet Tedpfx Aou Acuzjltea Stanje: pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Opis: malo rabljen nosilec za Combilift CB2500 in CB3000, na voljo sta dva kosa, eden za viličar s širino 135 cm in drugi za viličar s širino 175 cm.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.700 mm, skupna višina: 120 mm, skupna širina: 50 mm, nosilnost: 3.000 kg, Meta Multipal Beams – approx. 270 cm | inspected & used The Meta Multipal beams, approx. 270 cm long, come from checked used stock and are available immediately from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty racking systems. In addition, they can be used in the Jungheinrich System Type S, making them versatile for various warehouse requirements. Thanks to their sturdy construction and original design, they are reliable for daily warehouse operations. Specifications: Tjdpozqc Szsfx Altja - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - incl. safety pins - Original item no.: 402 6212 441291 - Used goods from stock, available for immediate delivery. -- AVAILABLE IN MULTIPLE QUANTITIES IMMEDIATELY -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. HAVEN'T FOUND THE RIGHT PRODUCT YET? Visit our website for a quick overview of many offers & product variations! Transport: Delivery can be arranged via our partner haulier if desired; costs depend on the destination postcode. Assembly: Our trained personnel are available to assist with the professional installation and dismantling of your warehouse equipment if needed. Our recommendation: Let us know your requirements... We are happy to assist you with the realization of your projects—from planning and ordering right up to installation. INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: novo, GMN TSE 240 cg - Hitrost: 3000-3600-4000-5000 min-1 / 37 dodatno brusilno vreteno, premer osi: 130 mm, ramenski premer spredaj pri navoju: 102 mm, s preizkusnim protokolom in izjavo o vgradnji, nova vrednost: 25.000 €, neuporabljeno, 100 % funkcionalno, obseg dobave po fotografijah. POZOR: Stroške pakiranja in prevoza prosimo povprašajte posebej! Tsdpfsi D U Trex Altoa

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost: 5.000 kg, Stolpna dvigala vrtljiva naprava 5000 kg, 3000, 1000 nosilnost Pozicioner Sideros Syncrolift Dvojni stolp Brezžični ročni daljinski upravljalnik Letnik proizvedbe: 2024 Nosilnost: 5000 kg Minimalna delovna višina: 1100 mm Maksimalna delovna višina: 1600 mm Hitrost: 0,5 obr/min Tedsuk Niyopfx Altja Navpična nastavitev: 500 mm Premer vpenjalne plošče: 1000 mm Pogonski motor za vrtenje: 2,2 kW Dvižni motor: 2 x 2,2 kW Na voljo so različne stolpne dvigalne vrtljive naprave: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10.000 kg, 20.000 kg Zahtevajte ponudbo

Stanje: novo, Leto izdelave: 2025, nosilnost: 500 kg, 3-axis turning and tilting positioners with load capacities of 500, 1000, 2000, and 3000 kg, clamping plate diameters of 0.5, 0.65, 0.8, and 1.0 meters HDL 500: Minimum height: 1000 mm Maximum height: 1500 mm Clamping plate diameter: 500 mm Arm radius: 800 mm (boom) Rotation speed: 0.1 – 1 rpm These units have proven themselves in the construction and agricultural machinery sectors, commercial vehicles, material handling equipment, as well as in the aerospace and energy industries. Ideal for welding, assembly, machining, etc. With their stable and robust construction, flexible three-axis positioning (including overhead positions), and user-friendly operation, they make welding, assembling, and handling large workpieces much easier. - Faster production, increased productivity - Optimum workpiece positioning improves weld quality and enables higher deposition rates Tjdpfx Aljulaxbetea - Enhanced safety – hazardous crane handling is greatly reduced - Positioning across up to three axes simultaneously, without time-consuming re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility enabled by modular adaptability and customised special designs Basic principle: By positioning the rotating arm axis above the clamping plate, the arm acts as a counterweight to the workpiece. As a result, these machines offer significantly higher performance compared to turn-tilt tables or rotary-tilting positioners. This principle allows handling of the specified loads in any required position. With infinite rotation of both rotary axes and additional vertical adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm; for models with 2,000 kg and above, 0.05 to 0.6 rpm With wireless remote control Continuous 360° rotation Continuous 360° tilt Lift: 1000 – 1500 mm; from 2 t load capacity: 1250 – 2000 mm Arm outreach up to 1 meter for loads up to 1,000 kg; from 2,000 kg: 1.5 meters