Brusilni stroj

ECOLINE Q-SAND 6

Leto izdelave: 2022, stanje: rabljeno, Number of sanding units: 6 pcs. Maximum sanding height: 120 mm Power: 12 kW Sanding machine ECOLINE QQSAND 6 - Year of manufacture: 2022 - New price: EUR 89,000 Sanding of individual parts after planing machine. Raw surface sanding. Sanding of upper and lower surfaces. Equipment: This sanding line is equipped with 6 sanding units. - Upper sanding pad D 400 mm Power 1.1 kW. Equipped with automatic tool changer. - Upper sanding pad D 400 mm Power 1.1 kW. Equipped with automatic tool changer. - Upper sanding brush D 320 mm L=250 mm, power 1.1 kW - Lower sanding pad D 400 mm Power 1.1 kW, equipped with automatic tool changer - Lower sanding pad D 400 mm Power 1.1 kW, equipped with automatic tool changer - Lower sanding brush D 320 mm L=250 mm, power 1.1 kW System Features: - All tools are controlled by frequency inverters. - All sanding brushes are equipped with quickly replaceable individual sanding lamellae. - All pads are fitted with air jets to optimize cleaning and operation time. - Sanding discs use a hook-and-loop (Velcro) fastening system. - Controlled start/end of operation to avoid edge breaking on workpieces. - The unique sanding system ensures the best results for preliminary surface sanding. - Constant pass-through height. PLC and industrial software facilitate integration in production lines. - Infinitely variable speed for pads, brushes, and feed thanks to full frequency inverter equipment. - Reversible (right/left) rotation of discs and brushes, equipped with different types of abrasive. - Additional adjustments for brushes and pads to optimize abrasive usage and to adjust sanding pressure on surfaces. - Low follow-up costs due to replaceable lamellas. - Low operating noise thanks to the fully enclosed machine housing. - Completely enclosed machine casing provides a cleaner, low-dust, and protected workplace. - Easy maintenance and operation. - Robust machine frame made of steel tubing for maximum rigidity, stability, and flatness. - All unit drives are equipped with linear recirculating ball bearings for high load capacity and precision. - 2 separate driven feed belts, each with a geared motor, 0.37 kW. - Above the units, there are rubber-coated upper pressure rollers D 80 mm to secure the workpieces during feed. - All units have extraction housings with corresponding extraction connections. Protective covers with extraction ports. Fsdpfxoynnttj Ahmsgc - Machine doors equipped with electric safety interlocks to ensure operator safety. - Machine doors with windows to monitor workpieces during operation. - Feed speed range from 2 to 12 m/min. - Feed direction: from right to left. - Steel stop (zero point) on the right side of the machine. 12.7" Touch Panel Control - The system is equipped with programmable logic control (PLC). - User-friendly touch panel for operating cycle control. - Large PLC memory capacity. - Clear presentation of the home page. Fast and simple calculations. - Setting the abrasive operation time via touchscreen. - Remote support via our service - Large and...

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Fsdpfxodqzcxo Ahmogc Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: pripravljen za uporabo (rabljen), Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life Fsdevu Hgbjpfx Ahmjgc - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Delno obnovljen stroj z merilnim protokolom v skladu s tolerancami za nove stroje NOV sistem vodenja Eckelmann ENC z BEMA programsko opremo za brušenje Numerično krmiljena B-os Notranja brusilna naprava premer 80 mm Brusni kamen levo premer 400 mm Fjdpfx Ahoyatx Ssmsgc Brusni kamen desno premer 300 mm Notranje brusilno vreteno HJN 828 Hidravlični konjiček Mikro nastavitev Merilni sistem KEL SET

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Fgedpfx Aerx Rxtshmjc Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Workpiece weight max. (fly): 130 kg including clamping Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Picture of a previously delivered machine. - Operation via touch panel is extremely simple. - The symbols on the control panel are nearly identical to the original system, so no extensive retraining required. - Diagnostic function with display of PLC messages and digital I/Os. - Dressing function can be expanded or modified per customer request. - Oriented spindle stop for workpiece spindle available on request. - New maximum infeed amount: 40 mm (can be optionally increased). - Digital readout on 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding spindle headstock (no height adjustment with spindle possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Collet tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system (X-axis) with stepper motor drive. Hydraulic table traverse and rapid feed. Versatile application in production for external and internal cylindrical grinding, or for combined external, face, and internal grinding in a single setup for individual parts. Fgsdpsuxfupsfx Ahmjc Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control system The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety targets must be determined by a risk assessment according to BetrSichV.

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 32.870 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6030578, premer struženja: 32 mm, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 32 mm, We offer for sale a Traub TNL26K CNC automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Fsdpjvldx Asfx Ahmjgc Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of stationary and driven tool holders – please see the attached photo for a complete list.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2020, max. workpiece length: 6360 mm Milling spindle: 1 unit Main motor: 13 kW CNC control SCM CNC machining center ACCORD 40 FX for windows and doors ----- INCLUDES comprehensive range of window and door tooling Fodpfx Aoy Hl Iyshmsgc including (window profiles on request!): Wooden windows IV 68, 78, 92 Wooden windows "style windows" Wood-aluminum windows Front doors Lift and slide doors Box-type windows Machine can still be inspected under power! Technical summary (detailed description on request!): ----- - Working area X-Y= 6360x1905, Z =350 - Automatic table with 8 support beams MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP setting - self-calibration system for the working unit Prisma - Chip deflector on the electrospindle, adjustable - Preparation for angle gearbox "Prisma T-S" - BRC working unit: saw blade for end processing, 1 slot for vertical milling tool 3 vertical, independent drill heads, 32 mm center distance 3 vertical drill heads (not independent), 21.5 mm center distance, for handle bore drilling 4 horizontal drill heads (2 per side, not independent), 21.5 mm center distance 2 horizontal milling heads (1 per side) - TRC 48 - rear tool magazine 48 tool positions (tool holders excluded) Pitch distance between positions 104 mm Maximum tool diameter 350 mm Maximum tool length 320 mm Maximum tool weight 10 kg (15 kg with HSK 63 E spindle) Maximum total weight on the magazine 250 kg - MACH 5 - quick-change system: Enables tool change on the electrospindle in just a few seconds. - Pendulum operation - Automatic axis lubrication - eye-M operating console with integrated PC - Additional fixed operator panel - TECPAD - remote control for machine functions - Clamping jaw preparation H145 for worktable with 8 support beams - Front stop row H110 for worktable with 8 support beams - Rear stop row H110 for worktable with 8 support beams - Vacuum block H110 145x145 mm - Vacuum block H110 145x55 mm, rotatable - Vacuum block H110 180x65 mm, rotatable - First lateral stop row H145 for worktable with 8 support beams - Second lateral stop row H145 for worktable with 8 support beams - Clamp H145 with round base - Clamp H145 with square base - No. 6 lifting devices with double stroke H145 - Laser and reference stop H145 for arch (left) - PRO-SPEED safety system - Maestro CNC – machine operation and programming interface - Maestro pro view – simulation software Tool sale in the condition, scope, and with accessories as available in our warehouse. Note on window profiles, tool drawings, tool system listings: Company Engelfried offers no guarantee that the existing tools match the mentioned and drawn systems. (Technical data according to manufacturer – without guarantee!)

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] Fedpouhav Defx Ahmegc - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Leto izdelave: 1998, stanje: rabljeno, Technical details: Profile width: 50 mm Working height: 950 mm Interface: RS 232 Pinout Window profile processing machine suitable for continuous processing of materials such as plastic, aluminum, and timber window frames. Material transport is handled via a pneumatic conveyor and clamping system. The system comprises two workstations (machines), one electrical control cabinet, one operator control panel, and conveyor units. Additionally, it includes a stand with vibratory conveyor system, chip extraction unit, and a stand with receipt printer. Fodpfxju Ibuwe Ahmsgc Our photos show the machine first in its installed location and then additional shots of the plant ready for sale and transport. Workstation No. 1 (Machine 1): - Saw station with saw blade Ø 400 x 4.5 mm - Drill unit with clamping chuck (vertical, upward) - Drill unit with clamping chuck (horizontal) - Drill unit with clamping chuck (vertical, downward) - Twin drill unit with clamping chuck (vertical, downward) - 45° drilling unit with clamping chuck (upward) Workstation No. 2 (Machine 2): - Drill unit with clamping chuck for screw joints (vibratory bowl) (vertical, upward) - Milling spindle, horizontal, with 11 disc cutters - Triple drill unit with clamping chuck (vertical, downward) - Triple drill unit with clamping chuck (vertical, upward) - Triple drill unit with clamping chuck (horizontal) 2 motor-driven conveyor units: - L x W x H: 5,650 x 2,400 x 1,000 mm - Conveyor width: 1,980 mm 2 motor-driven conveyor units: - L x W x H: 2,150 x 2,750 x 1,050 mm - Conveyor width: 2,300 mm