Preskušanje materialov nakup rabljenega (460)

Stanje: zelo dobro (rabljeno), CTS Type: TS-70/350-10 CTS Temperature Test Chamber TS-70/350-10 Water-Cooled Temperature Testing: Temperature range: –70 °C to +180 °C Temperature deviation (over time): ≤ ±0.3 K Temperature change rate (per IEC 60068-3-5): Heating: 10 K/min Cooling: 10 K/min Heat Emission: Approx. 5000 W at +20 °C Approx. 5000 W at 0 °C Approx. 3200 W at –40 °C Conditions for the stated values: Ambient temperature: +25 °C Rated voltage: 400 V Without test specimen Without irradiation Without additional equipment Dimensions/Volume: Test volume: 350 liters Test chamber dimensions Height: approx. 750 mm, Width: approx. 650 mm, Depth: approx. 720 mm External dimensions Height: approx. 1800 mm, Width: approx. 850 mm, Depth: approx. 1640 mm Operating Data: Electrical connection: 400 V, 3/N, 50 Hz Rated power: 16.6 kW Rated current: 25.7 A Ledpfjw U A Rtox Ah Doah Refrigerants: R404A / R23 Weight: approx. 750 kg Important information for your safety as a buyer! The following steps are performed on all chambers offered: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant as required 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical specifications may be subject to change or error; all specifications are subject to confirmation!) For further questions, feel free to contact us by phone.

Leto izdelave: 2022, Stanje: skoraj kot novo (rabljeno), Memmert ICH 750 Chamber from 2022, originally packaged and tested, like new condition, one-year spare parts warranty Temperature Temperature setting range: -10 to +60 °C Operating temperature range: from -10°C to +60°C without humidity (not suitable for long-term storage below zero; with continuous operation, glass doors may frost up) Operating temperature range: from +10°C to +60°C with humidity and/or light Temperature setting accuracy: 0.1 °C Temperature sensors: 2 Pt100 sensors, DIN class A in 4-wire configuration, mutually monitoring and assuming functions in case of failure Humidity Humidity supply: distilled water supply from an external tank via self-priming pump Humidification: Lsdpfx Aexcgh Roh Doah humidification via steam generator Humidity control: active humidification and dehumidification, adjustable from 10–80% RH, with digital display for relative humidity – display resolution 0.1%, setpoint accuracy 0.5% Control Technology ControlCOCKPIT TwinDISPLAY. Adaptive, multifunctional digital PID controller with microprocessor and two high-resolution color TFT displays. Adjustable parameters: temperature (°C or °F), fan speed, relative humidity, program time, time zones, summer/winter time Language settings: German, English, Spanish, French, Polish, Czech, Hungarian, Italian, Chinese Timer: digital countdown timer with target time setting, adjustable from 1 minute to 99 days SetpointWAIT Function: process time does not start until set temperature is reached Calibration: freely selectable three values for temperature/humidity and two for CO₂ Ventilation Fan: forced air circulation in the working chamber, adjustable from 10–100% in 10% increments Communication Data logging: program is saved in case of power failure Programming: AtmoCONTROL software on USB stick for programming, managing, and transferring programs via Ethernet interface or USB port Safety Temperature control: mechanical temperature limiter TB, safety class 1 according to DIN 12880, disconnects heating approx. 10 °C above nominal temperature Temperature monitoring: overtemperature/undertemperature monitor TWW, safety class 3.3, or adjustable temperature limiter TWB, safety class 2, selectable from the display AutoSAFETY: integrated overheating/undercooling protection system "ASF", automatically tracking setpoint within defined tolerance range, alarm if temperature is exceeded or falls below limits; in case of overtemperature heating is switched off, in case of undertemperature – compressor Self-diagnostic system: integrated error diagnostics for temperature and humidity control Alarm: visual and acoustic Heating Concept Air jacket: air jacket heating system for gentle, uniform heating Heating concept: no sample drying caused by the cooling unit thanks to separation of heating jacket from chamber interior Cooling: energy-efficient cooling/heating system, CFC-free refrigerant R134A Defrosting: high-performance, automatic defrost system Standard Equipment Factory calibration certificate: standard values +10°C and +37°C, 60% RH at +30°C

Leto izdelave: 2017, Stanje: dober (rabljeno), - Standard deviation: 0.01 g/l - In good condition Lsdswff A Iopfx Ah Djah

Leto izdelave: 2022, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, We are offering an Instron tensile and compression testing machine in excellent condition. Instron 34TM-50 tabletop model with 3 load cells and a wide range of accessories (see images). Configuration: E1-F1-G1 50 kN Year of manufacture: 2022 Weight: 151 kg Load cells included: - 50 kN: 2530-50kN/165541 - 5 kN: 2530-5kN/166885 - 500 N: 2530-500N/164475 Software: - Bluehill Universal, Version 4.29.29784, on USB stick - Software installed on PC Last maintenance and calibration: August 2024 Next maintenance and calibration: August 2026 The 3400 Series universal testing machines cover a force range from 500 N to 300 kN. Featuring Instron's patented operator protection architecture, the 3400 Series testing machines are more user-friendly, intelligent, and safer than ever before. These testing systems are suitable for tensile, compression, bending, peel, puncture, friction, shear, and many other tests, and can be equipped with a wide variety of grips and fixtures from our extensive range of accessories. Technical Specifications: - Overall height: 1,604 mm Lajdpfx Aewz Iktsh Deh - Maximum vertical test space (daylight opening – from base to underside of crosshead): 1,198 mm - Test types: tensile, compression, and zero-cross operation - Primary control mode: displacement control - Load capacity – kN (lbf): 50 (11,240) - Maximum speed – mm/min (in/min): 508 (20) - Minimum speed – mm/min (in/min): 0.05 (0.002) - Max. force at max. speed – kN (lbf): 25 (5,620) - Maximum speed at maximum force – mm/min (in/min): 254 (10) - Return speed – mm/min (in/min): 508 (20) - Crosshead speed accuracy: ±0.2% of set speed at constant rate, no load - Crosshead position indication accuracy: unloaded ±0.02 mm (0.0008 in) or ±0.10% of reading, whichever is greater - Crosshead position repeatability – mm (in): ±0.015 (0.0006) - Force measurement accuracy: ±0.5% of measured value down to 1/200 of the load cell’s rated capacity - Strain measurement accuracy: ±0.5% of reading down to 2% of full scale, using an extensometer (ASTM E83 Class B or ISO 9513 Class 0.5)

Stanje: novo, Visoka zmogljivost, visoka natančnost pH & ORP. InPro 3253i SG/120 je digitalni, predtlačeni, nizkoodrževani ISM pH & ORP senzor, kombiniran s temperaturnim senzorjem za linijsko merjenje v zahtevnih aplikacijah. 120 mm različica je optimalna za kratke vgradne dolžine. Optimiziran za parno sterilizacijo Ljdpfxsh Rulhj Ah Dsah Parno sterilizabilna pH steklena membrana senzorja InPro 3253i SG/120 omogoča optimalno uporabo v procesih, kjer sta potrebni sterilizacija ali avtoklaviranje. Nizko vzdrževanje in enostavna uporaba Ta digitalni pH senzor uporablja tehnologijo Intelligent Sensor Management (ISM), ki ponuja prediktivno diagnostiko za zmanjšanje potrebe po vzdrževanju in kalibraciji. Sterilizabilen in avtoklavirljiv Senzor omogoča hitro in natančno merjenje pH in ORP tudi po več ponovitvah avtoklaviranja in sterilizacijskih ciklov.

Leto izdelave: 2020, Stanje: pripravljen za uporabo (rabljen), Operating temperature: 10-300°C, setting temperature: 20-300°C, setting accuracy: up to 99.9°C: 0.1°C, from 100°C: 0.5°C, temperature sensor: 1x Pt100 DIN class A, 4-wire measurement, control: Control COCKPIT Single DISPLAY, digital PID microprocessor controller with TFT color display, timer: 1 minute to 99 days, functions: SetpointWAIT, calibration of 3 temperature values, parameter selection (temperature, circulating air motor, exhaust air, program running time, time zones), electronically controllable air turbine, adjustable in 10% increments, fresh air via adjustable exhaust flap with preheating, exhaust connection with throttle valve, electronically controllable, logging: data storage in the event of power failure, programming: data logger evaluation via Ethernet, AtmoCONTROL software optionally via USB, safety: electronic temperature monitoring, mechanical limiter TB, protection class 1 (DIN 12880), self-diagnosis system, internal dimensions: 400x320x250mm, volume: 32l, max. shelves: 3, max. load: 60kg, max. load per shelf: 20kg, length: 650mm, width: 660mm, height: 890mm, weight: 45kg. The oven has barely been used. An on-site inspection is possible. Lasdpfxsw Tl Ils Ah Djh

Stanje: zelo dobro (rabljeno), CTS CTS Climate Test Chamber Type: C -40/600 Air-cooled (converted to R-452a) Test chamber volume: 600 liters Temperature tests: Temperature range: -40°C to +180°C Temperature deviation: ±0.1 K / ±0.3 K over time (when equilibrated) Average rate of temperature change, without specimen and without heat input, Heating: 2.5 K/min Cooling: 3.0 K/min Maximum heat input: 2500 W at +20°C Climate tests: Climatic range / Technical data Temperature range: +10°C to +95°C Humidity range: 10% r.h. to 98% r.h. Dew point range I: +7°C to +94°C Dew point range II: –10°C to +7°C Stability values (over time): Humidity stability I: ±0.5% r.h. to ±1.5% r.h. Humidity stability II: ±1% r.h. to ±3% r.h. Temperature stability: ±0.1 K to ±0.3 K Test chamber dimensions (H x W x D), approx.: 850 mm x 850 mm x 830 mm External dimensions (H x W x D), approx.: 1900 mm x 1115 mm x 1850 mm Refrigerant: R-452A Electrical connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your security as a buyer! The following steps are carried out on our chambers prior to delivery: 1. Functional inspection and exchange of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate Lodjw U Awmopfx Ah Doah 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Specifications and data subject to change and error!) If you have any further questions, we will be happy to answer them by phone.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Ex-demo chamber Binder MK 1020 E5, like new. Tested and originally packaged by the manufacturer. One-year spare parts warranty PRODUCT DESCRIPTION The BINDER MK series chamber is designed for all types of heat and cold testing at temperatures from -40°C to +180°C. For cyclical temperature tests, the MK chamber is a cost-effective alternative to expensive customized solutions. KEY FEATURES Temperature range: -40°C to 180°C APT.line™ preheating chamber technology Programmable anti-condensation protection for samples Heated viewing window with LED interior lighting BINDER Multi Management Software APT-COM™ Basic Edition Diagnostic system with visual and acoustic alarm Intuitive controller with touch screen for time-segment and real-time programming Internal data logger; measurement values in open format readable via USB 2 access ports with 80 mm silicone plugs, left and right Independent, adjustable class 2 (DIN 12880) temperature safety device with visual alarm 4 castors, two with brakes Computer interface: Ethernet Ramp function setting possible Built-in line recorder Real-time clock Heated door 1 stainless steel wire shelf Stainless steel interior Lasdpexbg H Dsfx Ah Djh Halogen-free refrigerant R-452A Cooling provided by compressor unit One-year spare parts warranty

Stanje: dober (rabljeno), Climate Test Chamber +10°C to +90°C, Air-Cooled The test chamber is designed and constructed for climate tests within its working range. It enables test procedures to determine the effects of temperature and humidity on material properties and functional reliability of test specimens. Operation of the test chamber can be conducted in manual mode (constant value mode) or automatic mode. With the EDIT program, comprehensive climate tests can be programmed and up to 99 test programs can be stored. These test programs are run in automatic mode. The test chamber can be operated via the RS 232 interface with a computer and TSI software or in ASCII mode. The operating temperature limit selector safeguards the specimen against inadmissibly high temperatures. Additionally, the upper and lower temperature limits can be set on the terminal to protect the test item. Manufacturer: Heraeus Vötsch Model: VC 0033 Specifications for Temperature Testing: Temperature range: +10°C to +90°C Humidity range: 30 - 95% Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 2.7 kW Rated current: 12 A Ljdpfx Asxbnkwjh Deah Refrigerant: R 404A Test chamber volume: approx. 333 liters Humidity Range: Humidity range for normal operation (area 1 and 3) with +5°C dew point limitation Humidity range 3 is omitted when additionally equipped with a capacitive humidity measurement system Tolerances for Standard Climate Condition: 23°C / 65% RH Temperature ±0.1 K Humidity < ±1.5% 85°C / 85% RH Temperature ±0.1 K Humidity

Stanje: novo, Sonde für Sauerstoffmessung unter sterilen Bedingungen. Die InPro 6800 Gelöstsauerstoffsonde mit einem Gehäusedurchmesser von 12 mm bietet maximale Messgenauigkeit und höchste Reinigungsfähigkeit. Sensor für hygienische Anwendungen Der Sensor wurde speziell entwickelt, um den EHEDG- und FDA-Richtlinien für flache Oberflächen in Anwendungen mit sehr hohen Hygienestandards vollständig zu entsprechen. Robuste und hygienische Bauweise Das Gehäuse aus Edelstahl 316L ermöglicht CIP-Reinigung, Dampfsterilisation oder Autoklavieren direkt im Prozess. Die spezielle Oberflächenausführung des Sensors vermeidet jegliche Kontamination des Prozesses. Einfache Integration Lodpeh Rullsfx Ah Djah Der InPro 6800 Gelöstsauerstoffsensor lässt sich einfach in Ihren Prozess integrieren. Der wasserdichte VP-Steckverbinder (IP68) gewährleistet zuverlässige Messungen.

Stanje: zelo dobro (rabljeno), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality material testing machine, the Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), with comprehensive configuration. This system is ideal for performing tensile, compression, flexural, and component tests. It is offered complete with original Zwick software, accessories, and a protective screen. Ljdpfxew Uifds Ah Djah Complete system Including protective screen (CE-compliant, with electric interlock) Extensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Test speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guide, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducers (additional slot for expansions available) Expandable with options and modules Safety – Protective screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric locking and additional manual interlock Makrolon pane 6 mm thick, pivotable (hinged left) CE-compliant Mandatory for applications with risk of operator injury Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Stanje: zelo dobro (rabljeno), Binder FED 400 Laboratory Oven Temperature range: from 5°C above ambient temperature up to 300°C – Classic.Line series - Stainless steel interior, powder-coated housing - Digital temperature setting in 1°C increments - Digital controller with integrated timer - Timer allows programming of start, stop, and hold time for set temperature from 0 to 99 hours 59 minutes - APT.Line preheating system - Digitally adjustable fan speed - Temperature safety device class 2 (DIN 12880) with visual alarm Lasdpfx Aexanx Seh Djh - Two chrome-plated shelves as standard - Maximum number of shelves: 10 pcs - Maximum total load: 90 kg - Maximum shelf load: 35 kg - External dimensions with equipment and connections (L x H x W): 1235 x 1025 x 765 mm - Internal dimensions (L x H x W): 1000 x 800 x 510 mm - Computer interface: RS 422 - Net weight: 145 kg - Internal volume: 400 L - Power supply: 400 V

Stanje: dober (rabljeno), Vötsch VTU 100/150 Grelna in sušilna komora Proizvajalec: Vötsch Tip: VTU 100/150 Nazivna temperatura: 250 °C Uporabni volumen: 1500 m³ Skupna nosilnost: 400 kg Nazivna moč: 27 kW Priključna moč: 29 kW Nazivni tok: 42 A Priključek na omrežje: 400 V, 3 PH+N PE, 50 Hz Teža: 780 kg Mikroprocesorski regulator temperature in programa Jumo dvotočkovni regulator Digitalni prikaz nastavljene/dejanske temperature, prikaz v jasnem tekstu Enostavno nalaganje dna naprave preko zložljive nakladalne rampe Lajdpfoxbgt Dox Ah Djh Dimenzije Notranje: (Š x V x G) 1000 x 1500 x 1000 mm Zunanje: (Š x V x G) 1840 x 2389 x 1450 mm Ostale izdelke – nove in rabljene – najdete v naši trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: zelo dobro (rabljeno), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z0.05 Type: BT1-FRO.5TS.D14 with testXpert II V3.0 software Zwick/Roell zwicki Z0.5 TS Materials Testing Machine 0.5 kN Professional materials testing machine for tensile, compression, bending, and component testing. Fully equipped with testControl electronics, testXpert II software, accessories, and PC workstation. Technical data of the testing device Model: zwicki Z0.5 TS Rated force: 0.5 kN (500 N) Max. test space height: 573 mm Testing speed: 0.001 – 2000 mm/min (optionally up to 3000 mm/min) Online correction of machine compliance for maximum accuracy Adaptive controller for force and strain regulation High-precision, real-time measurement processing Modular expandability: 2 module slots (optionally up to 4) Tension range flexibly adjustable Xforce P load cell Type: Precision Rated force: 500 N Accuracy class 1 to ISO 7500-1 from 2 N Accuracy class 0.5 from 10 N Insensitive to lateral forces, bending/torsion moments Robust design, overloadable up to 150% of rated force Incl. calibration certificate according to ISO 7500-1 Software – testXpert II Incl. basic program in German Easy operation under Windows XP/Vista (compatible with standard PCs) Integrated simulation mode (virtual testing machine) Statistical evaluation & tolerance monitoring Accessories Unit for tack loop test Fmax 500 N Fixture for adhesive tapes Lajdpsw Uf Uzofx Ah Djh Glass plate 25 x 30 mm (FINAT Test No. 9) incl. holder Screw specimen holder type GRS500 PL Fmax 500 N Max. opening width 21 mm Incl. Vulkollan jaws, Ø 32 mm PC & Workstation HP DC7800 Midi Tower incl. Windows XP Pro (German) Intel Core 2 Duo E6750, 2 GB RAM, 160 GB HDD DVD drive, Gigabit Ethernet, multiple USB/serial ports 19" LCD monitor (1280 x 1024), keyboard & mouse testXpert II software pre-installed Dimensions (W x D x H): approx. 450 × 450 × 1200 mm Weight: approx. 60 kg (without PC and accessories) Condition: used Scope of delivery: (See photo) Zwick/Roell zwicki Z0.5 TS materials testing machine (0.5 kN) Xforce P load cell (500 N, incl. calibration certificate) testXpert II software (basic program, German) Accessories: tack loop test unit, glass plate with holder, screw specimen holder GRS500 PL PC workstation with monitor, keyboard, and mouse Documentation in German (Specifications and technical data are subject to change and errors!) If you have any further questions, we would be happy to answer them by phone.

Stanje: dober (rabljeno), Weiss climate test chamber with seat pulsator Manufacturer: Weiss Model: SD 1400/+20 DU Test Chamber: Material: Stainless Steel Dimensions Height: approx. 800 mm Width: approx. 2000 mm Depth: approx. 900 mm Volume: 1440 liters External Housing: Material: double-coated Zincor sheet Dimensions Height: approx. 2000 mm Width: approx. 2200 mm Depth: approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: light grey (RAL 9002) Door, double-leaf: hinged left and right Equipment: Port openings in floor and ceiling: 2 each, nominal width 100 mm, for the integration of pulsation tables Port openings in side walls: 1 each, left and right, 100 mm Refrigeration unit: air-cooled Control system: Digital Measurement and Control System DMR Basic operating unit: integrated into main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance Data: Temperature range without climate control: +20...+100 °C Temperature constancy without climate control: +0.2 … +0.5 K (over time), depending on range, at steady state Temperature range with climate control: 20...+95 °C Laodpfxsxbgrgo Ah Dsh Temperature constancy with climate control: +0.2 ... +0.5 K (over time), depending on range, at steady state Dew point range: 20...+94 °C Humidity range: 10...98% r.h. Humidity constancy: +3...+5% r.h., depending on range, at steady state Temperature change rate measured at outlet, without sample and load: - Cooling: 0.5 K/min average, between +100 and +20 °C - Heating: 0.5 K/min average, between +20 and +100 °C Performance data refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation, the ambient temperature must be between +10 and +35 °C. Seat test device with steel frame for mounting and securing on the climate test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights of 5 kg each • 1 base frame in standard welded steel construction for fastening to the underside of the climate test chamber. This frame is fitted on all sides with removable panels and features 2 hinged doors for adjusting eccentricity. These doors are equipped with safety switches. • 2 eccentric cams with bearings and tachometer; 2 connecting rods; 2 ball guides • 2 perforated assembly tables, 20 mm grid, 650 x 650 mm, for connecting test specimens, made of aluminum, min. thickness 10 mm • 2 perforated mounting plates, 20 mm grid, 200 x 200 mm, for connecting buttock simulation • 2 loading rods Ø 60, made of stainless steel (connection to the test specimen is not included in our price, but can be offered separately after precise definition) • 2 three-phase motors; 2 belt drives with tensioners • 1 pneumatic control system with 2 manual valves, a filter-regulator unit, and a shut-off valve; 1 electrical control cabinet with 2 SEW frequency converters, manual switch, emergency stop button, 2 start buttons, 2 stop buttons, 2 speed displays, 2 potentiometers for speed adjustment, 2 preset load cycle counters with reset and cut-off Technical Data: Frequency: 100-1000 cycles/min Load: 2 x 45 kg Stroke: 0 - 40 mm Top load: 450 N each More items – new and used – can be found in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Liebisch Type: K1000 M-TR / 4203.6101 USED Liebisch K1000 M-TR Constacon – manual chest-type condensation test chamber Corrosion/Condensation Testing Device (Chamber volume: 1000 L) Product Description: For sale is a used Liebisch K1000 M-TR, a robust and high-quality chest device for performing condensation water tests. Ideal for laboratories, quality control, or industrial applications. Technical Data & Features Model Variant: Constacon K 1000 M-TR – Condensation water device without ventilation Chamber volume: approx. 1000 litres Operating mode: Manual (Type M-TR) External dimensions (W × D × H): 2600 × 1120 × 1210 mm Internal dimensions of test chamber (W × D × H): 1535–1425 × 800–780 × 660–650 mm Test Standards: For condensation (Constacon): DIN 50958, DIN EN ISO 6270-1/-2 Control: Simple manual control panel – parameters such as temperature and operating mode can be set directly on the device. Temperature control: PID-regulated, typical setpoints: Condensation tests: approx. 40 °C (up to max. 50 °C) Heat-up time: approx. 1 hour Weight: approx. 400 kg Condition: used Scope of supply: (see picture) Lajdpfx Ahow Tbdpo Doh (Specifications and technical data subject to change and errors excepted!) If you have any further questions, we will be happy to answer them by phone.

Stanje: rabljeno, Hanau Heraeus Original Hanau Suntest CPS+ – Appareil de test de vieillissement lumineux pour essais de matériaux Description : À vendre : un Hanau Suntest CPS+ d'origine, appareil professionnel de vieillissement artificiel et de résistance aux intempéries des matériaux. Idéal pour les plastiques, les peintures, les textiles ou les matériaux d'emballage dans les laboratoires ou instituts de test. Points forts techniques : - Lampe à arc xénon pour une simulation réaliste de la lumière solaire - Intensité lumineuse réglable : 250–765 W/m² - Contrôle de la température au standard noir (BST) jusqu’à env. 100 °C - Cycles de test programmables avec phases lumières/obscurité - Mesure & contrôle : affichage TCT, port RS-232 pour transfert des données Laedpfjw S Tttox Ah Dsh - Refroidissement par air intégré, format laboratoire compact : env. 780 × 350 × 350 mm - Idéal pour laboratoires, recherche et développement - Résultats de test précis et reproductibles. État : d’occasion Livraison : (voir photo) (Modifications et erreurs dans les données techniques et informations sous réserve !) Pour toute information complémentaire, nous sommes à votre disposition par téléphone.

Stanje: zelo dobro (rabljeno), Vötsch "Headlamp Test Bench – Weiss / Vötsch VCS³ 4100-5-S (Indoor & Outdoor), available from week 40" Year of manufacture: 2018 For sale is a complete temperature and climate test system for automotive headlamps, consisting of two interconnected climate test chambers from the Vötsch VCS³ 4100-5-S series (Indoor & Outdoor). The system was specifically developed for the automotive industry and enables combined environmental testing according to OEM standards. Main Features: - Temperature and climate testing - Rain/precipitation simulation (flow rate 1–18 l/min, spray temperature 5–32 °C, tank 200 l) - Infrared irradiation (4 × 1.2 kW) for solar load simulation - Negative pressure/vacuum unit (0–50 Pa) for tightness tests - Airflow up to 15 m/s (driving wind simulation) - Real-time monitoring with webcam - Extensive sensor system (temperature and humidity sensors) - Additional power supplies for specimens (12–48 V) Lodjw S Ilkspfx Ah Doah Outdoor chamber (VCS³ 4100-5-S Outdoor): - Temperature range: –20 … +80 °C - Heating rate: 5 K/min | Cooling rate: 3 K/min - Humidity range: 4 … 95% r.h. - Dew point range: –30 … +79 °C - Accessories: Webcam, 5 temperature sensors Indoor chamber (VCS³ 4100-5-S Indoor): - Temperature range: –20 … +125 °C - Heating rate: 8 K/min | Cooling rate: 5 K/min - Humidity range: 4 … 95% r.h. - Dew point range: –30 … +88 °C - Vacuum unit: 0 … 50 Pa - Airflow: 0 … 15 m/s - Accessories: 4 power supplies (12–48 V), 3 temperature sensors, 2 humidity sensors Fields of Application Ideal for testing headlamps and similar components under realistic conditions. Used in automotive development, quality assurance, homologation tests, and endurance testing. Weight (estimated): 2× Vötsch VCS³ 4100-5-S base units: approx. 2 × 840 kg = 1,680 kg (typical catalog value per unit) Additional equipment/peripherals (rain, IR, vacuum, airflow, switch cabinets, cabling, partition plate): approx. +400 to +900 kg Water in tank (200 l): +200 kg during operation Transport "dry" (empty tank): approx. 2.1–2.6 t Operation "wet" (full tank): approx. 2.3–2.8 t Summary: approx. 2.1–2.8 t Scope of Delivery: - Indoor chamber Vötsch VCS³ 4100-5-S - Outdoor chamber Vötsch VCS³ 4100-5-S - Partition plate for model VCS³ 4100-5-S - Dimensions: Height × Width = 80 × 80 cm - Rain/IR/vacuum/airflow units Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical specifications, all information without guarantee!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Tip: VT 3050 Sestavni deli / Preskusna omara, temperaturna komora Zračno hlajenje Prostornina preskusne komore: 500 litrov Temperaturno območje: -30°C / +100°C Časovna temperaturna nihanja: K ±0,5 Prostorska temperaturna nihanja: K ±1,5 Temperaturni gradient: K 3 Hitrost spremembe: Gretje K/min 2,0 Hlajenje K/min 1,4 Toplotna kompenzacija maks. W 650 Kalibracijske vrednosti: +23°C, +80°C Notranje mere preskusne komore: širina 710 mm, globina 590 mm, višina 1250 mm Zunanje mere: širina 940 mm, globina 1030 mm, višina 1955 mm Ledpfxjw S E N Tj Ah Djah Raven zvočnega tlaka db(A)

Stanje: rabljeno, Vötsch Model: VC 0018 Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Width 580 x Depth 450 x Height 750 mm Laodpfx Ahew Swrtj Deh External Dimensions: Width 865 x Depth 1150 x Height 1780 mm Test Chamber Volume: approx. 190 liters Specifications for Temperature Testing: Temperature Range: -10 °C to +90 °C Temperature Deviation (stabilized state, according to IEC 60068-3-5, dependent on test chamber temperature): Temporal: ±0.1 to ±0.5 K Spatial: ±0.5 to ±2.0 K Temperature Change Rate (according to IEC 60068-3-5): Heating: 0.6 K/min. Cooling: 0.3 K/min. Heat Compensation in the range of +20 °C to +50 °C: 200 W Calibration Points: +4 °C and +90 °C Specifications for Climate Testing: Temperature Range: +10 °C to +90 °C Temperature Deviation (stabilized state, according to IEC 60068-3-5, dependent on test chamber temperature): Temporal: ±0.1 to ±0.3 K Spatial: ±0.5 to ±1.0 K Humidity Range: 10% to 98% r.h. Electrical Connection: Rated Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power: 1.7 kW Rated Current: 9.5 A (Neutral conductor in plug: loaded) Schuko-type plug, approx. cable length: 3.5 m Fuse Protection: 16 A slow-blow, to be provided on site Weight: approx. 380 kg net Refrigerant: R-134A Important Safety Information for Buyers! The following procedures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and information excepted!) Feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), Weiss Lsdpfx Aew Strceh Djah Tip: SC/KWT 450 Solna pršilna komora Tehnični podatki: Prostornina preizkusne komore: 450 litrov Največja obremenitev: 100 kg Rezervoar za solno raztopino: 180 litrov Zunanje mere: višina 920 mm, širina 1930 mm, globina 800 mm Mere testne komore: višina 740 mm, širina 850 mm, globina 570 mm Področja uporabe: Korozijski testi: Test s solnim pršenjem: temperatura komore do +50°C Test s kondenzacijsko vodo: temperatura komore do +45°C Vlažilec +75°C Temperaturna konstanta Časovno odstopanje temperature: ±K Napetost: 1/N/PE AC 230V ±10% 50Hz Nazivna moč: 2,0 kW Nazivni tok: 8,7 A Kombinirani testi: Test s solnim pršenjem SS: DIN 50021 Test s kondenzacijsko vodo KFW: DIN 50017 Normalna klima (prezračevanje): DIN 50014 Teža: 180 kg Stanje: rabljeno / used Obseg dobave: (glej sliko) (Spremembe in napake v tehničnih podatkih so pridržane!) Za dodatna vprašanja smo vam na voljo po telefonu.

Stanje: zelo dobro (rabljeno), CTS Type: TS-70/1150-10 CTS Temperature Test Chamber, water-cooled Control: 32-bit controller LCD operating panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Ethernet interface Free switching channels for customer-side test specimen control Operation: capacitive touch display & PC-based control (USB/Ethernet) Test chamber dimensions: Height approx. 1250 mm / Width approx. 1000 mm / Depth approx. 920 mm External dimensions: Height approx. 2000 mm / Width approx. 1800 mm / Depth approx. 1600 mm Temperature testing: Temperature range: -70°C to +180°C Temperature deviation: ≤ ±0.5 K over time Temperature change rate according to IEC 60068-3-5 Heating: 10 K/min Cooling: 10 K/min Heat dissipation: approx. 5000 W at -20°C The technical data refer to an ambient temperature of +25°C Test volume (interior): approx. 1150 liters Operating data: Electrical connection Rated voltage: 400V 3/N 50Hz Power: 27.6 kW Rated current: 47.5 A Cooling system: two-stage R404A (17.8 kg) + R23 (5.4 kg) Lasdow R Tunjpfx Ah Doh Weight: approx. 1500 kg The following procedures are carried out on the chambers we offer beforehand: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2020, Stanje: zelo dobro (rabljeno), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss Climate Test Chamber ClimeEvent, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: Designed for a maximum load of 250 kg Technical specifications for temperature tests: Temperature range: -55°C to +180°C Temporal temperature fluctuation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Maximum heat compensation: 8000 W Technical specifications for climatic tests: Ljdpfx Ahjw R Rt Ij Doah Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Climatic performance data (excerpt) Humidity range: 10 to 98% relative humidity (r.h.) Temporal humidity deviation: At center of test space, under stabilized conditions, depending on climate value: ±1 to ±3% r.h. Temporal temperature deviation: At center of test space, under stabilized conditions, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to set value (in range > 20% r.h.): ±0.5 to ±1 K Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with Greenmode Weight: approx. 2050 kg For your safety as the buyer, please note the following information! The following steps are carried out in advance on all our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented test run is performed. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) If you have any further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Type: VT 7021 Temperature Test Chamber, Air-Cooled 1 Feedthrough, DN 80 mm Test Chamber Volume: 210 liters Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ± 0.2 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1.5 K Temperature Change Rate Heating: 2.5 K/min Temperature Change Rate Cooling: 2.5 K/min Max. Heat Compensation: 800 W Test Chamber Dimensions: Width 560 mm x Depth 570 mm x Height 630 mm External Dimensions: Width 850 mm x Depth 1250 mm x Height 1640 mm Electrical Connection: 1/NPE AC 230V ± 10% 50Hz Rated Power: approx. 1.8 kW Rated Current: 12 A Refrigerants: R404A and R23 Lasdpfx Aow Rz Tljh Dsh Weight: 355 kg Important Information for Buyers: For your safety, the following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical specifications and information) Further questions can be answered by phone.

Stanje: dober (rabljeno), Vötsch Type: VCS 7130-15 Vötsch Climate Test Chamber, Water-cooled Technical data for temperature tests: Temperature range: -70°C to +180°C Temporal temperature deviation at chamber center: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 16 K/min Cooling: 14.5 K/min Technical data for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation at chamber center: ±1 to ±3% r.h. Heat compensation: max. 8,000 W Technical data - housing dimensions: External dimensions with hinges and door lock: Height: 1,995 mm, Width: 1,680 mm, Depth: 1,855 mm External dimensions without hinges and door lock: Height: 1,995 mm, Width: 1,300 mm, Depth: 1,855 mm Internal dimensions: Height: 950 mm, Width: 1,100 mm, Depth: 950 mm Test chamber volume: approx. 1,300 liters Feedthroughs: The chamber is equipped with feedthroughs on both the right and left sides. These allow measurement leads and test equipment to be routed into the test chamber. 1 x R1 NW 125 mm 1 x R1 NW 140 mm 1 x L1 NW 50 mm Test chamber lighting: Halogen bulb 24 V, 50 W 3/N/PE AC 400V ±10% 50 Hz Rated power: 44.0 kW Rated current: 63.0 A Ljdpfjwvgwbox Ah Dsah Fuse (site): 100 A slow-blow Max. heat emission to ambient: 2.2 kW Approved specimen weight: Total load on shelves: 100 kg Test chamber floor: 150 kg, Insert grid: 50 kg Refrigerant: R404A / R23 Weight: 1,900 kg Important safety information for you as the buyer: The following actions are carried out on all chambers we offer before sale: 1. Function check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See image) (Technical specifications subject to change; errors and omissions excepted!) For further questions, we are happy to assist you by phone.