Preskušanje materialov nakup rabljenega (470)

Stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch dryer for coating materials. - Maximum concentration of flammable substances: < 40% of the lower explosion limit (LEL) - Maximum heating surface temperature: over 750°C Device Description: Technical Data: - Interior (usable volume): 0.216 m³ - Internal dimensions: Width 600 mm, Height 600 mm, Depth 600 mm - External dimensions: Total width 796 mm, Height 1,725 mm, Depth 850 mm Loading / Load capacity: - Total roller conveyor capacity: 55 kg - Loading height above installation floor: 820 mm - Weight (net): 275 kg Cjdpfxshv Ru Ss Afqerk Minimum exhaust air volume flow: 96 m³/h Purge time (for 5 air changes): 90 seconds Recirculation air volume flow (boosted): 33 m³/h Total steam space: 0.414 m³ Sound pressure level (according to DIN 45635): < 70 dB(A) Shutdown temperature: - Fixed temperature limiter (TB): 300°C - Adjustable temperature selection limiter (TWB) above nominal temp: 20°C Temperature safety class (per EN 60519-2): - Temperature limiter (TB): 1 - Temperature selection limiter (TWB): 2 Nominal temperature: 200°C Electrical Data: - Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60Hz - Rated current: 12.0 A - Rated power: 6.0 kW - Connection load: 7.0 kW Weight: 275 kg Type: LTU 60/60 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical specifications and details!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Vötsch Temperature and Climate Test Chamber We offer here a Heraeus Vötsch temperature chamber. Heraeus Vötsch temperature chamber, air-cooled Test chamber volume: 110 liters Test chamber dimensions: width 560 mm, depth 350 mm, height 630 mm External dimensions: width 850 mm, depth 1030 mm, height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Cooling rate: 3.2 K/min Heating rate: 3.5 K/min Refrigerant: R-404A / R23 Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 1.8 kW Rated current: 12 A Type: VT 7011 Important information for your safety as a buyer! The following steps are carried out on our chambers prior to offering: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) Crjdpfxsh Agt So Afqek For further questions, feel free to call us.

Stanje: zelo dobro (rabljeno), Here we offer a Mytron drying oven. The WT 850 drying oven is designed for simultaneously drying multiple products or auxiliary devices in the semiconductor industry. Due to its robust construction (box section frame design) and the use of stainless steel material for the heating chamber, the WT 850 drying oven is universally applicable. The roll-in rack facilitates easy loading and unloading of the WT 850 drying oven. An exhaust nozzle with regulating damper allows the oven to be connected to a central extraction system. Technical data: - External dimensions: Width 1145 mm x Height 1880 mm x Depth 1810 mm - Heating chamber dimensions: Width 850 mm x Height 690 mm x Depth 1410 mm Codpfeiwyiwjx Afqsrk - Heating chamber volume: approx. 830 liters - Weight: approx. 230 kg, trolley 50 kg - Temperature range: 10°C above ambient up to +120°C - Spatial temperature uniformity: ± 1°C - Temporal temperature stability: ± 1°C - Power connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug - Power consumption: 4.5 kVA - Protection: 3 x 16 AT, 1 x 6 AT - Control: Digital controller - Safety feature: adjustable over-temperature protection Access ports: - Exhaust nozzle 100 mm with regulating damper (top) - Inlet nozzle 100 mm with regulating damper (top) Type: WT 850 Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data and information!) We are happy to answer any further questions you may have by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated easily by touching the function icons on the »Touch Panel«. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine components, the test chamber is equipped with adjustable feet. Feed-throughs Feed-throughs are fitted on both the right and left sides of the test chamber. These allow test leads and testing devices to be routed into the test space. Feed-throughs come as standard: Crsdpowh Ttmjfx Afqsk R1: nominal width 125 mm L1: nominal width 50 mm Test Space Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ±0.1 to ±0.5 K Spatial deviation: ±0.5 to ±2.0 K Temperature change rate in accordance with IEC 60068-3-5: Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH Temporal temperature deviation at center: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation at center: ±1 to ±3 % RH Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12.0 A Power cable: 3.5 m Fuse protection: 16 A slow-blow, to be provided by buyer Refrigerants: R-404A and R-23 Test Chamber Volume: approx. 190 liters Weight: approx. 460 kg net For your safety as buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical specifications and information are subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VCL 7003 Climate Test Chamber, Air-Cooled Test Chamber Volume: approx. 34 liters Performance Data for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.3 to ±1.0 K Spatial Temperature Uniformity: ±0.5 to ±2.0 K Rate of Temperature Increase (Heating): 4.0 K/min Rate of Temperature Decrease (Cooling): 3.0 K/min Heat Compensation: max. 550 W Temperature Calibration Points: +23°C and +80°C Performance Data for Climate Testing: Temperature Range: +10 to +95°C Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Temporal Temperature Deviation: ±0.3 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.5 K Climate Calibration Points: +23°C / 50% r.h. and +95°C / 50% r.h. Test Chamber Dimensions (W x D x H): 350 x 300 x 310 mm External Dimensions (W x D x H): 640 x 750 x 1730 mm Electrical Connection: Crjdpfx Ajv Tnd Sjfqok 1/N/PE AC 230 V ±10%, 50 Hz Nominal Current: 11.0 A Maximum Power Rating: 2.5 kW Sound Pressure Level: 59 dB(A) Refrigerant: R-404A / R23 Weight: approx. 130 kg For your security as a buyer, please note the following: The following procedures are performed on all chambers we offer in advance: 1. Functional test and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are run through a documented test cycle. Condition: used Scope of delivery: (see image) (We reserve the right to make changes or correct errors in the technical data and specifications!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber VTS 7033, Water-cooled Temperature range: -70°C to +180°C Temperature deviation over time: ± 0.5 K Temperature deviation spatially: ± 1.5 K Heating rate: 7.5 K/min Cooling rate: 6.5 K/min Test chamber dimensions: Width 825 mm x Depth 800 mm x Height 870 mm Housing dimensions: 1080 mm x 1710 mm x 1950 mm Side cable ports: 12 cm and 13 cm Voltage: 400V +6/-10%, 3/N, 50Hz Crsdpfx Afslt U Avjqek Rated power: 9.5 kW Rated current: 22 A Refrigerant: R404A / R23 Approx. 570 liters Weight: 580 kg For your security as a buyer, please note the following information! The following procedures are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Model: VTS 7033 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vötsch Climate Test Chamber We offer a Vötsch climate test chamber for sale. Model: VC³ 4100, air-cooled With temperature change rate of 3 K/min Test chamber dimensions: height 950 mm x width 1100 mm x depth 950 mm Overall dimensions: height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Port openings: Ø 125 mm, Ø 50 mm Specifications for temperature testing: Temperature range: -42°C to +180°C Csdpfx Ajqmn A Nefqerk Temperature deviation over time: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4,500 W Specifications for climate testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temperature deviation over time: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Humidity deviation over time: ± 1 to ± 3% r.h. Max. heat compensation: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404 A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following points are carried out on all chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data may be subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch climate test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Port openings: Ø 125 mm, Ø 50 mm Temperature test data: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 W Climatic test data: Temperature range: +10°C to +95°C Crsdpfx Afjqwim Ejqjk Dew point range: -3°C to +94°C Humidity range: 10 to 98% rH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% rH Max. heat compensation: 500 W Voltage: 3/N/PE AC 400V ± 10%, 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 Important safety information for you as a buyer: The following steps are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions for you by phone.

Stanje: zelo dobro (rabljeno), TIRA Type: TCZ 4022 S-2K Description: Air-cooled Climate Simulation Chamber System Configuration: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance range for temperature testing: - Temperature range: -40...+140°C - Temperature stability in supply air (temporal): ≤ ± 0.5°C (without thermal test room load, according to DIN 50011 Τ13 / EN 60068) - Temperature stability in supply air (spatial): ≤ ± 1.0°C (without thermal test room load, according to DIN 50011 / EN 60068) - Heating rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C - Cooling rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C Performance range for climate testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test room load) - Dew point temperature range: +5...+89°C (without thermal test room load) - Humidity stability (in supply air, temporal): ≤ ± 2.5% r.h. (measured in supply air) Performance range for climate testing with heat compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test room load) - With max. 16 kW heat compensation - Dew point temperature range: +10...+74°C (without thermal test room load) Dimensions: - Test room (W x D x H): approx. 2260 x 4648 x 2260 mm - Outer dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test room door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design features: - Air routing: Supply air via perforated plate at rear wall, ceiling area; Exhaust air via perforated plate at rear wall, floor area - Temperature control: Direct cooling via refrigerant evaporation in finned heat exchanger; Heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in heat exchanger - Internal lining: Stainless steel; External cladding: Galvanized, powder-coated steel sheet - Floor design: Stainless steel; Floor load capacity: 15,000 N/m²; Wheel load (contact area ≥4cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, exterior painted with viewing window (W x H) 1000 x 1000 mm - Test room lighting: 4 spotlights, each 500 W - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Bltzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Color scheme: - Chamber: RAL9010, white - Door: RAL9010, white - Machine unit: RAL 7032, pebble grey - Control cabinet: RAL 7032, pebble grey Weights: - Complete unit: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification system: approx. 64 kg Crjdpfovx S Hhox Afqsk Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz - Rated power: 95 kW - Rated current: 150 A

Leto izdelave: 2022, Stanje: zelo dobro (rabljeno), Weiss Type: T/800/70/10 Water-cooled External dimensions (H x W x D): 2085 x 1415 x 2810 mm Test chamber dimensions (H x W x D): 950 x 1100 x 800 mm Volume: 800 liters Minimum temperature: –72 °C Maximum temperature: +180 °C Temperature change rate, cooling: 12.0 K/min Temperature change rate, heating: 12.0 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature uniformity (spatial): ±0.5 to ±2.0 K Temperature gradient: ≤2.0 K Heat compensation at +20 °C: 8000 W Power supply: 3/N/PE AC 400 V ±10% 50 Hz or 3/N/PE AC 440 V ±10% 60 Hz Rated power: 30 kW Rated current: 57 A Operating hours: approx. 10 (Never used) Condition: used Weight: 1600 kg Scope of delivery: (see picture) Sale ex location! (Subject to change and error in technical data and specifications!) Codpfx Aovxrwgefqsrk For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Weiss We offer here a Weiss emissions test chamber. Mini-SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 mm (Usable height: 1600 mm) Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating range: +18 °C ... +45 °C (for higher temperatures, SHED operation is only possible without Tedlar bags) Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Duct connection (air inlet and outlet): ∅ 80 mm, at rear of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation Delivery limit: connection flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3 PH + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ +18-45 Condition: used Codpfx Afemfny Ijqsrk Sale from site Scope of delivery: (Only the Weiss emissions test chamber WT 5.1'/ +18-45 Mini-SHED) (Subject to changes and errors in technical data, specifications may be subject to revision!) For further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a Köhler salt spray chamber. Köhler Salt Spray Chamber Corrosion Chamber Köhler Salt Spray Chamber HKT 500 Operation via touch panel Internal dimensions W x D x H (without hood): 1880 x 840 x 1210 mm Test chamber volume: 500 l Temperature range: chamber room temperature up to 50°C Power supply: 230V 1P/N/50Hz 3000W Type: HKT 500 WTG 400 kg Condition: used Scope of delivery: (see picture) Croden Arqdepfx Afqek (Specifications and technical details subject to change and error!) If you have any further questions, we will be happy to answer them over the phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VTS³ 7018-5 Water-cooled Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 900 mm x Depth 1550 mm x Height 1850 mm Temperature testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Temperature change rate: Cooling 7.5 K/min Test chamber volume: 190 liters Csdpfon E Sk Ejx Afqork Rated voltage: 400 V Rated current: 20 A Rated power: 9 kW Weight: approx. 540 kg Refrigerant: R404A and R23 Important safety information for buyers: The following procedures are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak tightness testing with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Specifications subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Espec Type: Espec Model: TSA-303EL-W Water-cooled Cold chamber: -65°C to 0°C Hot chamber: +50°C to 200°C System: Two-zone test via flap switching Temperature fluctuation: ±0.5°C Hot chamber: Temperature heat-up time: Ambient temperature to +200°C within 15 min. Cold chamber: Temperature pull-down time: Ambient temperature to –70°C within 40 min. Temperature recovery: within 10 min. Internal dimensions (W x H x D mm): 970 x 460 x 670 External dimensions (W x H x D mm): 1870 x 1900 x 1770 (1805) Power supply: 400 V AC 50Hz; 70 A Refrigerant: R449A 5 kg, R23 2.0 kg Weight: approx. 1450 kg Year of manufacture: 2018 For your safety as a buyer, the following work is carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Csdpovgw Uaefx Afqerk Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Stanje: rabljeno, mytron Type: T2240 Temperature Chamber, Water-Cooled Technical Data: External Dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test Chamber Dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test Chamber Volume: approx. 2240 l Cable Entry Ports: 2 x 100 mm right side 2 x 100 mm left side Temperature Range: –40 °C to +100 °C at 23 °C ambient temperature Crodjvtl Hqjpfx Afqek Temporal Temperature Consistency: +/- 0.5 K Spatial Temperature Consistency: +/- 1.0 K Cooling: Water cooling, Inlet and outlet 1" internal thread Cooling water shut-off via solenoid valve when unit is OFF Fault indicator for refrigeration system errors Cooling water consumption: Inlet temperature approx. 15 °C, approx. 15 l/min, Outlet temperature approx. 22 °C (approx. 27 °C during continuous cooling) Power Supply: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power Consumption: approx. 6.5 kVA Fusing: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each on the left and right sides of the test chamber Exhaust Connection: DN 100 mm plug-in system Safety Device: Electronic over-temperature protection, fixed setting Smoke gas monitoring with audible alarm Viewing Window: Quintuple glazing 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data, all information is non-binding!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Model: VTS 7027-15 Vötsch Temperature Test Chamber, Water-cooled Temperature range: -70°C to +180°C Temperature change rate: Temporal temperature deviation: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Cooling rate: 18.0 K/min Heating rate: 17.0 K/min Test chamber dimensions: Width 580 x Depth 620 x Height 950 mm External dimensions: Width 870 x Depth 1895 x Height 1775 mm Side port: 1x 60 mm ∅ and 2 x 120 mm ∅ Crjdpfx Aswl Argsfqek Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 16 kW Rated current: 31 A Refrigerants: R452A / R23 Approx. 270 liters Weight: 835 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on the chambers we offer: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Specifications subject to change and errors excepted!) If you have any further questions, we will be happy to answer them by phone.

Stanje: dober (rabljeno), TIRA Model: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature range: -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Csdpfxeuviums Afqjrk Scope of delivery: (See picture) (Technical data and specifications are subject to change and errors may occur!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, LDS Type: V875 Shaker System V875-440 LPT600C with SPA40K Amplifier Vibration Exciter for Medium Forces Technical Data: Armature Size: 440 mm Head Expander: 850 x 850 mm Sine Force Vector: 35.6 kN (peak) Random Force Vector: 35.6 kN (RMS) Shock Force Vector: 106.75 kN (peak) Frequency Range: 5 to 3000 Hz Maximum Specimen Mass: 600 kg Maximum Acceleration: 1078.7 m/s² Maximum Velocity: 1.8 m/s Displacement: ±25.4 mm Vibration Test Modes: - Sine - Random - Shock Crjdpeuxcugefx Afqjk Amplifier: SPA40 Slip Table: Dimensions (W x H x D): 1400 mm x 1250 mm x 2200 mm Working Surface: 600 mm x 600 mm Plate Thickness: 37 mm Plate Weight: 27.4 kg Max Load Capacity: 500 kg Condition: used Weight: - Shaker approx. 2200 kg - Blower 181 kg - Amplifier: 622 kg - Slip Table: 4760 kg Scope of Delivery: (See photos) (Subject to change and errors in technical data. All information is provided without guarantee.) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: LTU 60/60 Heraeus Vötsch Dryer for Coating Materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum heating surface temperature: over 750°C Device Description: Technical Data: Chamber (useful volume): 0.216 m³ Internal dimensions: Width 600 mm x Height 600 mm x Depth 600 mm External dimensions: Total width 796 mm x Height 1,725 mm x Depth 850 mm Loading / Load capacity: Roller conveyor total: 55 kg Loading height above installation floor: 820 mm Net weight: 275 kg Minimum exhaust air flow: 96 m³/h Purging time (5 air changes): 90 sec Recirculating air volume flow (boosted): 33 m³/h Total steam space: 0.414 m³ Sound pressure level (according to DIN 45635): < 70 dB(A) Shut-off temperatures: Temperature limiter (TB), set: 300°C Adjustable temperature selector limiter (TWB): above nominal temperature by 20 Temperature safety class (according to EN 60519-2): Temperature limiter (TB): 1 Temperature selector limiter (TWB): 2 Nominal temperature: 200°C Electrical Data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated output: 6.0 kW Power connection value: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) Codpjun Rr Rofx Afqerk If you have further questions, we are happy to answer them by phone.

Stanje: dober (rabljeno), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Codpsun Ruljfx Afqjrk Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber internal dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 litres Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound pressure level at 1 m distance (free-field measurement):

Stanje: zelo dobro (rabljeno), Espec Model: EGN28-6CWL Espec Temperature Water-Cooled Temperature Test Chamber N Series Power Supply: AC 400 V 3-phase 50/60Hz 38A Csdpfx Aeuzva Ujfqerk Temperature Range: -70 to +180°C Temperature Change Rate: Heating 10 K/min Cooling 5.5 K/min Internal Dimensions (W x H x D in mm): 1000 x 1000 x 800 External Dimensions (W x H x D in mm): 1205 x 1920 x 2159 Usable Volume: 800 liters Refrigerant R-404A Refrigerant R-508A Weight: approx. 695 kg Important safety information for you as a buyer! The following points are checked and performed in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak check with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Stanje: dober (rabljeno), LAC Heating Cabinet SV6000/25 Temperature range: +20 to +250°C Software: TESTO Codpfx Afeuugaqsqerk Weight: 1,750 kg Volume: 6,000 litres External dimensions: 2,850 × 2,000 × 3,700 mm Test chamber dimensions: 2,000 × 1,500 × 2,000 mm Oven switch: 100/3 Max. floor load: 2,000 kg Circulation: 3,000 m³/h Rated power: 66 kW Rated current: 98 A Voltage: 3/N/PE 400/230V AC 50 Hz Weight: 1,750 kg Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors reserved!) If you have any further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Liebisch Type: S 1000 A-TR / 42016211 Chest-type apparatus with 1000 liters test chamber volume for salt spray tests. Constamatic® TR This series includes fully automatic chest-type devices of the A-TR type. Device operation is controlled via a touchscreen. All functions are displayed on a touchscreen with an intuitive user interface. Technical Data: Device type: S 1000 A-TR External dimensions (W x D x H in mm): 2600 x 1120 x 1210 Test chamber internal dimensions (W x D x H in mm): 1535/1425 x 800/780 x 660/650 Max. load capacity per sample rack: 10 kg per level Operating voltage: 230 V +6/-10% Connected load S: 2700 W Humidity control range S: up to / 70°C Test chamber temperature range K: up to / 50°C Test chamber temperature range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution reservoir: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 – 1.0 liters Water basin capacity, bottom tray KON: 15 liters Weight: 450 kg Condition: used Crodpowf Dh Njfx Afqsk Scope of delivery: (See picture) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: rabljeno, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-Cooled (converted to R-452a) Temperature range: -70 °C to +180 °C Humidity range: 10–98% RH Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg For your safety as a buyer, please note the following information! The following measures are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications may be subject to change and errors excepted!) Crjdpfx Asxb Dm Iefqok If you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Weiss Type: WK3-2200/40/5/V Weiss climate test chamber, water-cooled Specifications for temperature tests: Temperature range: -40°C to +180°C Temperature change rate: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Codew I Rxrepfx Afqjrk Temporal: ±0.8 K Spatial: ±2.0 K Heat compensation: max. 8000 W Specifications for climate tests: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor panel Humidity range: 10 to 95 % r.h. Temporal temperature deviation: ±0.3 K Temporal humidity deviation: ±3 % r.h. Temperature uniformity: Spatial: ±1.0 K Heat compensation: max. 500 W Test room volume: 2160 liters Test room dimensions: Height 1115 mm, Width 1400 mm, Depth 1400 mm External dimensions lowered: Height 2318 mm, Width 1860 mm, Depth 3658 mm External dimensions over shaker: Height 2710 mm External dimensions max. lift height: 3038 mm Changing floor dimensions: Width 1600 mm, Depth 1504 mm Operating data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow Refrigerant: R 404A Weight: approx. 2100 kg For your peace of mind as a buyer, the following is provided: The following checks and procedures are performed on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see image) (Specifications and details subject to change and error!) Further questions? We are happy to assist you by phone.