Preskušanje materialov nakup rabljenega (470)

Stanje: zelo dobro (rabljeno), Vötsch Type: VBT 03/500 Air-cooled Temperature test chest with spray device Technical Description: Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in stabilized state according to IEC 60068-3-5, depending on test chamber temperature temporal ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: Water level is below the insert rack Water level = 0 mm: Water level is at the top edge of the insert rack Standard spray device data: Number of spray nozzles: 6 Spray rate per nozzle: 0.5 l/min Spray device data as per EN 539-2, Method B: Number of spray nozzles: 6 Spray rate per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray rate per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Pre-tempered water tank data: Volume: approx. 2000 l Pre-tempering temperature range: +5°C to +40°C Temperature change duration: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Setup and operation data: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feed-throughs: 1 feed-through, ø 50 mm, installed on the left Test chamber capacity: approx. 500 liters Refrigerant: R-404a Electrical connection: Rated voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: approx. 26 kW Rated current: approx. 44.0 A (neutral conductor is loaded) Protection: 63 A gG, provided by customer Weight: approx. 890 kg net For your safety as a buyer, the following information: The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant if necessary 3. Leak tightness test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data are subject to change and errors!) Codpfx Aowc Nvgefqerk For further questions, please contact us by phone.

Stanje: rabljeno, Gläser Type: ACM 18 Machine control: SIEMENS PLC S7-1200 Safety control: SICK Flexi Soft 1 media circuit (hydrocarbon) Feed pump: variable speed gear pump (24 V) Vacuum pump: diaphragm pump (230 V / 50 Hz) 1 liftable/swiveling membrane holder with 3 removable cascade rings for filter membranes with ø 47 mm. System filter: 0.2 µm; length: 5 inches Return filter: 5.0 µm; length: 5 inches System pressure: max. 6 bar Maximum flow rate: 2.0 l/min Minimum flow rate: 0.250 l/min Maximum system temperature: 41 °C Tank capacity: approx. 12.8 liters Tank filling option via manual 3-way ball valve Return and reuse of rinsing medium Permissible ambient temperature: +15…+25°C Noise emission below 70 dB (A) Flow-Cap lid with 1 particle filter (separation efficiency: 99.995%; filter class: H14 HEPA filter according to EN 1822) Employee protection against splashing analysis liquid by protective sliding screen Drip tray under membrane holder Operation via 12'' BASIC touch panel (optional COMFORT panel) Operation via glass keyboard and control stylus with 12" COMFORT touch panel option 32 different test programs with 30 rinsing steps each Functions: spraying, rinsing, ultrasound Tank dimensions 750 x 600 x 500 (W x D x H) mm with usable ultrasonic volume of approx. 5 l (with Ø300 hemispherical bowl) Fold-up personnel safety shield with 3 movable panes for hand access (employee protection against splashing analysis liquid) Quick coupling in tank area for connecting various nozzles (one nozzle with Ø 2.5 mm included in delivery) Opening for component insertion: approx. 1100 x 2200 mm (W x H) Basket for ultrasonic use for components up to max. 3 kg Component carrier grid for parts up to 15 kg Extraction methods: spraying, rinsing, internal rinsing (optional), ultrasound Medium: Cold cleaner A III Analysis membrane Ø 47 mm (up to 3 pieces) Blank value: < 150 µm (at least from SaS 2 or SaS 3) Mains connection (machine): 230 VAC ±10%, 50/60 Hz Rated power: 500 W Rated current: 2 A Fuse: max. 16 A Supply line: at least 3 x 1.5 mm² Control voltage: 24 VDC External dimensions: H x W x D: 1922 x 800 x 893 mm Cjdswaypfopfx Afqerk Weight: 324 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data, all information subject to confirmation!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated easily by touching the function icons on the »Touch Panel«. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine components, the test chamber is equipped with adjustable feet. Feed-throughs Feed-throughs are fitted on both the right and left sides of the test chamber. These allow test leads and testing devices to be routed into the test space. Feed-throughs come as standard: R1: nominal width 125 mm L1: nominal width 50 mm Test Space Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ±0.1 to ±0.5 K Spatial deviation: ±0.5 to ±2.0 K Temperature change rate in accordance with IEC 60068-3-5: Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH Temporal temperature deviation at center: ±0.1 to ±0.3 K Codpfxswgayke Afqsrk Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation at center: ±1 to ±3 % RH Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12.0 A Power cable: 3.5 m Fuse protection: 16 A slow-blow, to be provided by buyer Refrigerants: R-404A and R-23 Test Chamber Volume: approx. 190 liters Weight: approx. 460 kg net For your safety as buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical specifications and information are subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss temperature chamber. Weiss Temperature Chamber with S!MCON / 32 control unit, air-cooled (Refrigerant converted to R-452A) Test chamber volume: approx. 335 liters Test chamber internal dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 12.5 A Rated power: 4.1 kW Fuse (customer side): 16 A slow-blow Sound pressure level approx. measured at 1m distance from the front, 1m height: 58 dB(A) Crodpfxjq U Sdne Afqsk Data for temperature testing: Temperature range: -72 to +180°C Temporal temperature deviation at the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-452A / R-23 Weight: 585 kg Type: WT3-340/70 Important information for you as the buyer! The following points are carried out in advance for our offered chambers: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: dober (rabljeno), Weiss Model: WK1-1000/70 Weiss Climate Test Chamber, Water-cooled (Refrigerant converted to R-452A) Control Unit: Touch Panel All control and operation commands can be initiated at the touch panel by simply touching the function symbols. Feedthroughs: Csdpfx Aervx Ezefqsrk The test chamber is equipped with feedthroughs on both the right and left sides. Measurement cables and test devices can be routed into the test chamber through these openings. Feedthroughs: 1 feedthrough ∅ 125 mm installed on the right 1 feedthrough ∅ 50 mm installed on the left Volume: 990 liters Test Chamber Internal Dimensions: Chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Specifications for Temperature Tests: Minimum temperature: –70 °C Maximum temperature: +180 °C Temperature deviation (over time): ±0.1 to ±0.5 K Temperature uniformity (spatial): ±0.5 to ±2 K Temperature change rate (heating): 4 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 2750 W Specifications for Climate Tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temperature deviation (over time): ±0.1 to ±0.3 K Temperature uniformity (spatial): ±0.5 to ±1 K Humidity deviation (over time): ±1 to ±3% RH Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 29A Rated power: 19.8 kW Refrigerants: R-452A / R23 Weight: approx. 910 kg For your security as a buyer, the following steps are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change; errors and omissions excepted!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Here we offer a screwing system. Cedpfxeqa A Ule Afqjrk Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) We are happy to answer any further questions by phone. Orders in writing are possible via email or fax.

Stanje: zelo dobro (rabljeno), Weiss Temperature Chamber We are offering a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume: approx. 990 liters Specifications for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation in center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature gradient (per IEC 60068-3-5): 1 to 4 K Temperature change rate (per IEC 60068-3-5): Heating: 4 K/min Cooling: 3 K/min Heat compensation: max. 4500 W Feedthrough included as standard R1: NW 125 mm L1: NW 50 mm Dimensions: Internal chamber dimensions (W x D x H): 1100 mm x 950 mm x 950 mm External dimensions (W x D x H): 1390 mm x 1525 mm x 1995 mm Maximum distributed load (test chamber floor): 150 kg Per shelf: 50 kg Total shelf load: 100 kg Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 11.5 kW Rated current: 22 A Heat emission (for water-cooled cabinets): max. heat output to ambient 1.3 kW Noise emission: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 840 kg Type: WT11-1000/40 Important Safety Information for Buyers: The following procedures are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, monitored with calibrated measuring equipment. Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data and information!) If you have further questions, we are happy to provide information by phone. Cjdpfxsp Dun Uo Afqsrk

Leto izdelave: 2020, Stanje: zelo dobro (rabljeno), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss Climate Test Chamber ClimeEvent, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: Designed for a maximum load of 250 kg Technical specifications for temperature tests: Temperature range: -55°C to +180°C Temporal temperature fluctuation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Maximum heat compensation: 8000 W Technical specifications for climatic tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Climatic performance data (excerpt) Humidity range: 10 to 98% relative humidity (r.h.) Temporal humidity deviation: At center of test space, under stabilized conditions, depending on climate value: ±1 to ±3% r.h. Temporal temperature deviation: At center of test space, under stabilized conditions, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to set value (in range > 20% r.h.): ±0.5 to ±1 K Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with Greenmode Weight: approx. 2050 kg For your safety as the buyer, please note the following information! The following steps are carried out in advance on all our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, new charging with legally compliant refrigerant Credpfjw R Rt Ijx Afqjk 3. Leak test with certificate 4. After successful inspection, a documented test run is performed. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) If you have any further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Weiss Tip: SC/KWT 450 Solna pršilna komora Tehnični podatki: Prostornina preizkusne komore: 450 litrov Največja obremenitev: 100 kg Rezervoar za solno raztopino: 180 litrov Zunanje mere: višina 920 mm, širina 1930 mm, globina 800 mm Mere testne komore: višina 740 mm, širina 850 mm, globina 570 mm Področja uporabe: Korozijski testi: Test s solnim pršenjem: temperatura komore do +50°C Test s kondenzacijsko vodo: temperatura komore do +45°C Vlažilec +75°C Temperaturna konstanta Časovno odstopanje temperature: ±K Napetost: 1/N/PE AC 230V ±10% 50Hz Cedpjw Strcsfx Afqsrk Nazivna moč: 2,0 kW Nazivni tok: 8,7 A Kombinirani testi: Test s solnim pršenjem SS: DIN 50021 Test s kondenzacijsko vodo KFW: DIN 50017 Normalna klima (prezračevanje): DIN 50014 Teža: 180 kg Stanje: rabljeno / used Obseg dobave: (glej sliko) (Spremembe in napake v tehničnih podatkih so pridržane!) Za dodatna vprašanja smo vam na voljo po telefonu.

Stanje: zelo dobro (rabljeno), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber 600 Litres with Simcon 32-net Chamber is air-cooled Reliable climatic chamber for demanding environmental simulations Ideal for laboratory, development & quality assurance. Device description: For sale is a professional temperature chamber by Vötsch Industrietechnik, Model VT 7060 with SIMcon 32-net control system. This powerful machine is suitable for a wide range of demanding environmental simulations, from material tests and electronics testing to long-term climate exposures. Technical Data (extract): Model: Vötsch VT 7060 Internal volume: approx. 600 litres Temperature range: –70 °C to +180 °C Temperature deviation in steady state: Temporal: ±0.1 K to ±0.5 K Spatial: ±0.5 K to ±2.0 K Temperature change rate (without specimen): Heating: 4 K/min Cooling: 3 K/min Control: SIMcon 32-net with touch panel Interfaces: RS232, optional RS485/422 1 × feedthrough NW 50 mm left 1 × feedthrough NW 125 mm left 2 × feedthroughs NW 125 mm right External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 404A and R 23 Weight: approx. 675 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Shipping / Collection: Collection preferred Shipping via freight forwarder on pallet possible throughout Europe. Crjdpfx Aewybb Njfqok (Shipping costs according to effort) Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data reserved!) If you have any further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Zwick / Roell Zwick / Roell Type HIT5.5P – Pendulum Impact Testing Machine For sale is a high-quality, used pendulum impact testing machine, model HIT5.5P, from the manufacturer Zwick / Roell. This device is ideally suited for instrumented impact testing in accordance with Charpy and Izod standards on plastics, metals, or composite materials. Device Data: Device = HIT5.5P Version = V2.8 HIT Cjdpfxjwqfnus Afqork Pendulum = 5 J Charpy Current Pendulum Energy = 5.000 J Friction = 0.017 J Friction Compensation = Empty swing Impact Velocity = 2.9 m/s Pendulum Mass = 1.19 kg Release Angle = 107.46 ° Pendulum Length = 330.0 mm Technical Specifications: Model: Zwick / Roell HIT5.5P Max. Impact Energy: 5.5 Joules Test Methods: Charpy, Izod (instrumented) Data Acquisition: Force-time and displacement-time curves Power Supply: 230 V / 50 Hz Scope of Delivery: - Zwick Roell HIT5.5P including 5.5 J pendulum - Control unit with operator panel - Power and connection cables Shipping via freight carrier (pallet shipment) – costs on request Collection by arrangement in Borken possible. Condition: used (Technical data subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Temperature Test Chamber T-55/1000 Li, Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z, Refrigerants R404A/R23 The type designation of the CTS chamber series is structured as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature limit -55°C 3) 1000 means: 1000 liters test chamber volume 4) Li means: special equipment for lithium-ion battery testing Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in clear text Ethernet interface RS 232 interface Free switching channels for external specimen control Test Chamber Lighting: Energy-efficient, high-intensity LED light strip mounted on the door Rack: Stainless steel, load surface 970 x 980 mm Maximum load per rack: 35 kg Total load with maximum rack assembly: 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4° for Minimax Technical Performance Data: Temperature Tests: Temperature range -50°C to +100°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Thermal Compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without thermal compensation, and without additional equipment. Options may affect performance data. Dimensions: Test volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions: Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operating Data: Crodovba Raspfx Afqsk Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Protection class: IP 54 Sound pressure level: < 58 dB(A) (measured according to DIN EN ISO 3744 at 1 m front distance) Weight: approx. 1000 kg Heat dissipation to ambient: 10.4 kW Refrigeration Unit: Water-cooled, low-noise, fully hermetic overall stepless power adjustment via electronic monitoring and control system environmentally friendly refrigerants R404A/R23 For your safety as a buyer—the following will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new refill with legally compliant refrigerant 3. Leak testing with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors!) We are happy to answer further questions by telephone.

Stanje: zelo dobro (rabljeno), Here we offer a TIRA temperature test chamber. TIRA temperature test chamber, air-cooled The chamber features an option for an external test box including an external sensor connection, therefore it can also be used as an external temperature control unit. Temperature range: -20°C to +140°C Temperature stability over time: ±0.1°C to ±0.3°C External dimensions: width 860 mm x depth 1500 mm x height 2100 mm Test chamber internal dimensions: width 601 mm x depth 545 mm x height 692 mm Electrical connection: 400V +6% / -10% 50Hz 3P+N+PE Nominal current: 10.0 (max. 17) A Nominal power: 5.2 (max. 9.0) kW Codpfx Afonyh T Seqjrk Net weight: 735 kg Refrigerants: R404A / R23 Type: TTRE 2001S For your security as a buyer, please note the following information! For all test chambers we offer, the following steps are carried out in advance: 1. Functional check and replacement of necessary components 2. If required, refill with compliant refrigerant according to legislation 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data may be subject to changes and errors!) For further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Active cooling system We are offering you an active cooling system here. Active cooling system Type: EOL EMP 242 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications and details!) For further inquiries, we are happy to answer your questions by phone. Crsdpfx Afon Apnaoqsk

Stanje: zelo dobro (rabljeno), Heraeus Heating and Drying Cabinet We offer here a Heraeus heating and drying cabinet for sale. Heraeus Heating and Drying Cabinet up to 250°C Manufacturer / Model: Heraeus UT 6060 Features: Temperature range: up to 250°C Net volume: 52 liters Codpfjn Arqljx Afqerk Weight (empty): 53 kg Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm Rated voltage: 230V 50/60Hz Rated current: 6.8 A Rated power: 1.50 kW Model: UT 66060 Condition: used Scope of delivery: (See photo) (Specifications are subject to change and error!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Espec We are offering an Espec (ThermoTec) stress test chamber for sale. Crjdpon Arznefx Afqsk Overpressure humidity tests above 100°C in various modes Program capacity of 10 patterns, with 30 steps per pattern A range of safety features: Overheating/overpressure protection, water supply failure detection, complete door locking mechanism, and temperature sensor. Saturated temperature range: 105 to 142.9°C Unsaturated temperature range: 105 to 132.9°C Humidity range: 50 to 100% r.h. Nominal pressure: 0.196 MPa at 132.9°C and 100% relative humidity External dimensions: Width 740 x Height 1553 x Depth 1000 mm Test chamber dimensions: Width 355 x Height 355 x Depth 426 mm Other features: - Equipped with rails and grids - Test item connections inside the chamber - Type: EHS-221M - Scope of delivery: see images Weight: 300 kg Condition: Used Scope of delivery: See images (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Shock Test Chamber We are offering you a Vötsch shock test chamber. Water-cooled Temperature range: -80°C to +220°C Cjden Avcuepfx Afqsrk Hot chamber: +50°C to +220°C Intermediate chamber: -10°C to +90°C Cold chamber: -80°C to +70°C Mains voltage: 400V ±10% 3/N 50Hz Rated current: 30.5 A Rated power: 13.5 kW Refrigerant HC: R 404A 3.00 kg p*: 25 bar Refrigerant CC: R23 15 bar p*: 25 bar Condition: used Type: VT 7012 S3 For your security as a buyer, the following procedures are carried out on all chambers offered by us: 1. Functional testing and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored by calibrated devices. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Technical Specifications: - With a temperature change rate of 25 K/min - Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm - External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm - Temperature range: -72°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 - Spatial temperature uniformity: ±0.5 to ±2.0 - Cooling rate: 25 K/min - Heating rate: 25 K/min - Heat compensation at -20°C: 8000 W - Heat compensation at +20°C: 8000 W - Test volume: 270 liters Credpfx Afjtz Rqmeqjk - 2x side feedthroughs ∅ 125 mm - 1x side feedthrough ∅ 50 mm - Chamber is water-cooled Test chamber lighting: - LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 26 kW - Rated current: 44 A - Refrigerants: R-452A and R-23 - Weight: approx. 980 kg Important safety information for you as the buyer! The following points are carried out in advance on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented trial run Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and information!) We will gladly answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test chamber internal dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Device external dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test chamber volume: 990 liters Temperature tests: Minimum temperature: -0°C Maximum temperature: +90°C Temperature change rate, cooling: 0.2 K/min Temperature change rate, heating: 0.5 K/min Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±1.0 K Heat compensation at +20°C: 350W Climatic tests: Minimum temperature: +10°C Maximum temperature: +90°C Dew point temperature range: +4°C to +89.5°C Cjdstz T D Aspfx Afqjrk Humidity range: 10 to 98% r.H. Temporal humidity deviation: ±1 to ±3% r.H. Temporal temperature deviation: ±0.1 to ±0.3K Spatial temperature uniformity: ±0.5 to ±1.0K Voltage: 1/N/PE AC 230V±10% 50Hz Nominal power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg Important information for your security as a buyer! For all chambers we offer, the following steps are carried out in advance: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Stanje: rabljeno, Vötsch Model: VCS 7034-5 Climate Test Chamber, Water-Cooled Test Chamber Volume: 335 liters Performance Data for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±2.0 K Temperature Gradient: 1 to 4 K Rate of Change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature Calibration Values: +23°C and +80°C Performance Data for Climate Testing: Temperature Range: +10 to +95°C Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1.0 K Temperature Gradient: 1 to 2 K Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Dew Point Range: -3 to +94°C Heat Compensation: 400 W Climate Calibration Values: +23°C / 50% RH and +95°C / 50% RH Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Nominal Power: 10 kW Nominal Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerant: R-404A / R-23 Important Safety Information for Buyers: The following procedures are performed on our offered chambers prior to delivery: 1. Functional inspection and replacement of necessary components Codpfeuxq T Dox Afqerk 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data is subject to change and errors may occur!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Espec Model: TSD-100 100 litres usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range heating chamber: +60°C to +200°C Temperature range cooling chamber: -70°C to 0°C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Over-temperature protection Operating hours counter Mobile design Cjdpjxugq Aofx Afqork 2 stainless steel specimen baskets Cable port Ø 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points are performed on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) If you have any further questions, we will be happy to answer them by phone.

Stanje: rabljeno, IMV Type: i240 + SA3AM Power Amplifier + Fan Dimensions Power Amplifier: SA3AM.i40 WxHxD 1234 x 997 x 720 mm Vibration Exciter: i240 WxHxD 580 x 1950 x 850 mm Technical Data of the System: Armature Mass: 20 kg Armature Diameter: 290 mm Armature Resonance: 2300 Hz Permissible Eccentric Moment: 850 N·m Crsdpfx Ajw H N U Dofqek Frequency Range: 0-2600 Hz. Maximum Force: 24 kN (sine and random) 48 kN (shock) Maximum Acceleration: 1200 m/s² (sine) 840 m/s² (random) 2400 m/s² (shock) Maximum Displacement: 100 mm p-p. Maximum Load Capacity: 400 kg. Ambient Conditions: Temperature 0-40 °C, Humidity 0-85% RH. Maximum Output Power: 30 kVA (SA3AM-i40) + Test Cube Material: Magnesium AZ91 Dimensions: 300x300x300 mm Shaker Armature: 290 mm Usable up to 2000 Hz Weight: 410 kg (SA3AM-i40) Total Weight approx. 2800 kg Condition: used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors reserved!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with touch panel) Features of this control system: - Color touchscreen with intuitive menu navigation (usually 5.7" or larger) - Programming of temperature/humidity profiles with ramp and dwell times - Data acquisition & logging (e.g., temperature progression, alarms) - USB port for data export (CSV, S!MPATI-compatible if applicable) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optional Modbus or Profibus VT³ 4100 – Technical Data (Temperature Test Chamber) - Test volume: 990 liters Crodpewyu H Eofx Afqjk - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min - Maximum thermal compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Interior dimensions (W×D×H): 1100 × 950 × 950 mm - Exterior dimensions (W×D×H): 1390 × 1955 × 1995 mm Feedthroughs: The test chamber is fitted with port openings on the right and left sides. These allow measurement lines and test devices to be routed into the test space. - 1 x L1 DN 50 mm - 1 x R1 DN 125 mm - 3 x R1 DN 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Sound level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Where needed, refilling with a legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical specifications and details!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Espec Type: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-cooled There is a small dent at the top edge of the door (see photo). The door closes perfectly, the seal is intact, and the climate chamber is technically faultless. The dent is purely cosmetic and has no impact on function, sealing, or control accuracy. Temperature range: -70°C to +150°C Humidity range: 20 to 98% r. H. Temperature/Humidity deviations: ± 0.3°C / ± 2.5% r.H. Temperature/Humidity stability: ± 0.5°C / ± 3% r.H. Heating/Cooling rates and times Heating rate: 5.0 °C/min Cooling rate: 3.0 °C/min Test chamber internal dimensions: Width 1000 mm x Height 1000 mm x Depth 800 mm External dimensions: Width 1410 mm x Height 1983 mm x Depth 1593 mm Port feedthrough with silicone plug, 100 mm Equipped with RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Cjdowz Er Uopfx Afqjrk Stainless steel design, AC 400 V 3-phase, 50Hz, 31 A Net weight approx. 720 kg For your safety as a buyer, the following information: The following measures are performed on all our offered chambers in advance: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Technical modifications and errors reserved! All data subject to change!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Liebisch KEA 300 Constanzo Fully functional condensate water test device for material and coating tests Description: The device is used to perform condensate water or water vapor tests according to common standards (e.g., DIN EN ISO 6270). Ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The construction is robust, low-maintenance, and ideally suited for research, laboratory, and quality control applications. Technical Data: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Crjdpfsxlzm Tex Afqok Rated power: 1,400 W Chamber size: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Control unit: None / manual operation Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and errors excepted!) If you have any further questions, please feel free to contact us by phone.