Preskušanje materialov nakup rabljenega (460)

Stanje: zelo dobro (rabljeno), Chamber in very good condition Binder climate chambers are used for testing material behavior under controlled humidity and temperature conditions. These devices operate within a temperature range from 0 °C to 70 °C, and a humidity range from 10% to 80% relative humidity. The distinctive feature of the Binder KBF is its absolutely reliable stability testing and precise maintenance of constant climate conditions. Accurate climate control makes these chambers ideal for stability testing. Lajdpfx Ahexnw Eqo Djh The climate chamber is designed based on a modular construction, and the interior is lined with stainless steel, which enables easy cleaning of the equipment. The use of APT.line™ preheating technology ensures smooth and even air circulation throughout the usable volume. The humidity level can be precisely regulated, allowing complete adaptation to specific requirements. Key features - Temperature range: 0 °C to 70 °C - Humidity range: 10% to 80% RH - APT.line™ preheating chamber technology - Humidity control with a capacitive humidity sensor and steam humidification - Tightly closing inner doors made of safety glass (ESG) - Prevention of glass corrosion with special TIMELESS coating - Inner chamber made entirely of stainless steel - 2 stainless steel wire shelves - 30 mm access port with silicone plug on the left side - 4 stable castors, two with brakes, from 240 L capacity upwards

Stanje: rabljeno, Liebisch KEA 300 Constanzo Fully functional condensate water test device for material and coating tests Description: The device is used to perform condensate water or water vapor tests according to common standards (e.g., DIN EN ISO 6270). Ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The construction is robust, low-maintenance, and ideally suited for research, laboratory, and quality control applications. Technical Data: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Laedpfx Ajxlzm Teh Djh Rated power: 1,400 W Chamber size: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Control unit: None / manual operation Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and errors excepted!) If you have any further questions, please feel free to contact us by phone.

Leto izdelave: 2021, obratovalne ure: 10 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Laboratorijski rotacijski reometer Kinexus lab+ s konfiguracijo valjčnega paketa C25 in merilno celico sile 50N, idealen za standardne reološke aplikacije v raziskavah in nadzoru kakovosti. Ta oprema je zasnovana za analiziranje reološkega obnašanja tekočih in poltrdnih materialov, vključno z viskoznostjo, tokom, tiksotropijo in oscilacijskimi testi. Platforma lab+ nudi natančen nadzor, toplotno stabilnost in intuitiven vmesnik, kar jo naredi primerno za laboratorije v kemijski, prehrambni, kozmetični, farmacevtski in polimerni industriji. Laodpfexp H Ukex Ah Djh Ključne značilnosti: Model: Kinexus lab+ Valjčni paket C25 – idealen za merjenja v valjčni (Couette) geometriji Maksimalna normalna sila: 50N – za občutljive aplikacije in materiale z nizko odpornostjo na striženje Robustna konstrukcija in visoka natančnost Združljiva programska oprema za napredno upravljanje in analizo Na voljo takoj

Leto izdelave: 2013, Stanje: rabljeno, Rotacijska miza Otočna miza Pogon za vrtenje Varilna vrtljiva miza Pozicionirna miza Vpenjalna plošča Raster plošča WEISS TIP: CR700 CAA Leto izdelave: 2013 Rotacijska pozicionirna miza s krmilno omarico, vključno s frekvenčnim pretvornikom in Pilz PLC krmiljenjem. Premer vpenjalne plošče cca: 700 mm Premer notranjega pesta cca: 320 mm Višina brez podstavka cca: 290/320 mm Lodpjxdv N Hsfx Ah Djah Premer podstavka cca: 1600 mm Višina podstavka cca: 190 mm Maksimalna dinamična aksialna sila: 70000 N Teža cca 585 kg plus podstavek Na voljo so 4 kosi tega vrtljivega pogona znamke Weiss. Poleg tega je na voljo še 1 vrtljivi pogon Expert Tünkers z ustrezno krmilno omarico s frekvenčnim pretvornikom in PLC krmiljenjem. Po želji je mogoče vrtljive mize kupiti tudi s šesterokotno vpenjalno ploščo dimenzij 2500 mm x 2500 mm, debeline cca 52 mm (glejte zadnje fotografije). Ponudbena cena velja brez vpenjalne plošče. Za dodatne podrobnosti ali nakup več pogonov za vrtenje nas prosim kontaktirajte.

Stanje: rabljeno, Designation: Emissions Test Chamber Manufacturer: Vötsch Model: VCE 200 Test Chamber Volume: 200 liters Temperature Range: +20°C to +130°C Humidity Range: 30 to 95% r.H. Temperature Deviation: temporal ± 0.3 K spatial ± 0.5 K Temperature Change Rate (average): cooling approx. 0.3 K/min heating approx. 0.4 K/min Dew Point Range: +5°C to 60°C Humidity Deviation: temporal ± 1 to 3% r.H. Voltage: 3/N/PE AC 400V±10% 50Hz Rated Power / Rated Current: 21 kW / 41 A Refrigerant: R404A Lasdpfsxg Hrqjx Ah Djh Test Chamber Internal Dimensions: 610 x 610 x 560 mm (W/D/H) Overall Dimensions: 1250 x 1700 x 2350 mm (W/D/H) Weight: approx. 750 kg Item Condition: Used item as shown in the pictures Please contact us if you have any questions Shipping: The specified shipping costs apply to deliveries within Germany Worldwide shipping (please inquire about shipping costs outside Germany) The given shipping costs apply to a shipping within Germany Sale exclusively to commercial customers. No warranty or guarantee. Deviations from technical data as well as errors in the description of the items are possible and are reserved.

Stanje: dober (rabljeno), Leto izdelave: 1990, Št. stroja: 5048, krmiljenje, proizvajalec Delem, tip DA-65W, tlačna sila 3.000 kN, dolžina upogiba 4.100 mm, razmik med stebri 3.550 mm, CNC upravljana X/R-os, CNC upravljano bombiranje, hidravlično vpenjanje orodja, laserska varnostna naprava, proizvajalec Trumpf Lodjxl D Duopfx Ah Deah

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno), Memmert UN 450 Laboratory Oven Very good condition, fully functional. Manufacturer's description: Temperature Operating temperature range: at least 5 °C (for models UN/UNplus/UNm/UNmplus) or 10 °C (for UF/UFplus/UFm/UFmplus) above ambient temperature up to +300 °C Temperature setting accuracy: up to 99.9 °C: ±0.1 °C / from 100 °C: ±0.5 °C Temperature setting range: +20 °C to +300 °C Temperature sensor: 1x Pt100 sensor, class A according to DIN, 4-wire system Ventilation Convection: natural convection Fresh air: supply of preheated fresh air via electronically controlled damper Air outlet: exhaust port with throttle damper Chamber volume: 449 l Internal dimensions (W x H x D): 1040 × 720 × 600 mm Maximum number of shelves: 8 Maximum chamber load: 300 kg Maximum load per shelf: 30 kg Lasdpfsxm Tazex Ah Deh External dimensions (W x H x D): 1224 × 1247 × 784 mm (depth +56 mm incl. door handle) Installation: on lockable casters Housing: galvanized steel (rear)

Stanje: zelo dobro (rabljeno), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This unit is used for testing water ingress into enclosures. When paired with a timer, the test cycle can be automated for adjustable durations ranging from 3 seconds up to 30 hours. Compliant with DIN VDE 0470 T1 and EN 60529 for insulation class testing according to protection ratings IPX3 and IPX4. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and replaceable nozzle holder - Adjustable and monitored water flow volume - Programmable test duration control Ljdpfx Ajxg Hrkoh Dsah Mechanical Load Data: - Max test specimen load (evenly distributed): - Permitted test load on specimen carrier (total): 25 kg - Spray radius: 200 mm / 400 mm IP Protection Class Test Data: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: - External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal chamber dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see picture) (Specifications subject to modifications and errors!) For further questions, please feel free to contact us by phone.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ceia model THS/3F detektor kovin s transportnim trakom. Višina vnosa 50 cm, višina iznosa 140 cm. Laodsxl Tt Espfx Ah Djh Največja velikost izdelka: širina 450 mm, višina 175 mm.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, !!! Enota je bila kalibrirana za temperaturo in CO2. Senzor za O2 je v okvari, a ga je mogoče zamenjati !!! Območje regulacije temperature: sobna temperatura + 3 °C do 55 °C Temperaturno odstopanje (časovno/prostorsko): ± 0,1 °C / ± 0,5 °C Območje sobne temperature: 18 °C do 33 °C Ljdpfx Ahsxbcwfj Doah Območje merjenja in regulacije CO₂: TC (termična prevodnost) senzor, 0 do 20 % Natančnost regulacije CO₂: ± 0,1 Vlažnost (stalna): ≥ 95 % rH Količina za polnjenje vode / kakovost vode: največ 3 (enote), destilirana ali avtoklavirana voda Dimenzije (Š × V × G): 25,1 × 34,1 × 30,2 in (~ 63,7 × 86,6 × 76,8 cm) Skupna prostornina: 5,4 kubičnih čevljev (150 L) Teža: 165 lb (~ 75 kg)

Stanje: pripravljen za uporabo (rabljen), Na voljo sta dva sušilna in grelna ormara Binder za laboratorijske namene. 1) Binder ED 400, uporabna prostornina: 400 l, notranje dimenzije Š/V/G: 1000mm/800mm/520mm, nivoji: 2, največja obremenitev nivoja: 35kg, skupna največja obremenitev: 90kg, priporočene razdalje do stene zadaj/stran: 160mm/100mm, maksimalno temperaturno odstopanje: +/-3K, največja temperatura: 300°C, moč: 3,4kW, dimenzije stroja Š/V/G: ca. 1250mm/1050mm/800mm, teža: ca. 125kg. 2) Binder KBF 115, uporabna prostornina: 100l, največja temperatura: 100°C, moč: 1,7kW. Dokumentacija je na voljo. Možen je ogled na lokaciji. Laodpfx Ahsxhntlo Doh

Stanje: zelo dobro (rabljeno), Professional mechanical analogue hardness tester for measuring the hardness of metals according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without external power – ideal for rapid measurements in the field, production, or quality control. Features: • Original set including carrying case, manual, and accessories • BRINELL, ROCKWELL B & C, and VICKERS scales Lajdpfx Ahsvbwzij Deh • Model: No. 3 / Instrumatic Universal Härteprüfgerät • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial indicator – power-free measurement • Clear, analogue measurement scale Package includes: • Hardness tester • Transport case • User manual (in German) • Complete set of adapters and sleeves (as shown) Condition: like new / ex-stock Equipment unused or only test-run a few times – no signs of wear.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Binder VDL 115 (2021) – Laboratory Vacuum Oven, Pristine Condition, Demo Unit Model: Binder VDL 115 Year of manufacture: 2021 Condition: as new – demo/showroom unit, factory tested Capacity: 115 liters Power supply: 230 V Availability: immediate Warranty: yes (start-up) VAT invoice: yes Location: Grabina 92-701, Poland Optional: transport — Description: For sale: Binder VDL 115 vacuum oven, designed for drying organic solvents and flammable substances under vacuum conditions. This is a VDL safety series model meeting ATEX requirements, intended for operation in explosion hazard zones (class 3). The device was only used for demonstration purposes – it is in immaculate visual and technical condition, complete with documentation. — Key specifications: • Temperature range: from +9°C above ambient to +200°C • Usable volume: 115 liters • Stainless steel chamber (1.4571) – chemically resistant, easy to clean • Controlled, safe vacuum with adjustable level • ATEX 2014/34/EU compliant, safety class 3 • LCD controller with programmable parameters • Standard configuration includes 2 aluminum shelves + inert gas valve — Applications: • Pharmaceutical and chemical industries • R&D laboratories Laodpovq I Tnsfx Ah Deh • Drying of solvents, non-reactive materials, temperature-sensitive samples • Production of electronic and precision components — Why choose this unit? • Machine in perfect, like-new condition • No signs of use, complete technical documentation • Ideal alternative to a new device – no lead time • Attractive price, possibility of on-site testing or remote presentation

Stanje: dober (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Specifications for Temperature Testing: - Temperature Range: -70 to +180°C - Temporal Temperature Deviation K: ±0.1 to ±0.5 - Spatial Temperature Deviation K: ±0.5 to ±2.0 - Temperature Gradient: 1 to 4 K - Change Rate: Cooling: 6.7 K/min Heating: 6.8 K/min - Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature Calibration Points: +23°C and +80°C Specifications for Climatic Testing: - Temperature Range: +10 to +95°C - Temporal Temperature Deviation: ±0.1 to ±0.3 K - Spatial Temperature Deviation: ±0.5 to ±1.0 K - Temperature Gradient: 1 to 2 K - Humidity Range: 10 to 98% - Temporal Humidity Deviation: ±1 to ±3% - Dew Point Range: -3 to +94°C - Heat Compensation: 400 W - Climate Calibration Points: +23°C / 50% r.h. and +95°C / 50% r.h. Test Chamber Internal Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical Connection: 3/N/PE AC, 400V ±10%, 50 Hz Rated Power: 10 kW Rated Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerants: R-404A / R-23 For your safety as a buyer, please note the following information! Lasdpfxexgd Rdo Ah Deh The following procedures are performed in advance on our offered chambers: 1. Functional test and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data and specifications!) For further inquiries, please do not hesitate to contact us by phone.

Stanje: rabljeno, Statična univerzalna preskusna naprava za materiale AllroundLine z dvema preskusnima prostoroma Lasdpfx Ahjxantcs Deh Trgalni preskusni stroj, tlačni preskusni stroj ZWICK / ROELL tip 1474 / 01 Letnik izdelave 1984 / 2003 Tip 01 . 96255/03 . 112137 Izvedba: univerzalni preskusni stroj Preskusna sila: 100 kN (10 t) Višina preskusnega prostora: 1460 mm Širina preskusnega prostora: 430 mm Hod: max. 1200 mm Preskusna hitrost: max. 250 mm/min Omrežna povezava: 400 V, 50 Hz (L1/PE/N) Nazivni tok: 10 A Moč motorja: 4,4 kW Vmesnik: RS485 - Nadgradnja krmiljenja leta 2003 - Za natezne, tlačne in upogibne preskuse na preskusnih vzorcih materialov, komponentah in sklopih - Izhod podatkov preko RS485 - 1 kos merilne celice za merjenje tlačnih in nateznih sil Stroj se prodaja brez računalnika in programske opreme, vključen je le vgrajen merilni senzor. Dimenzije (Š x G x V): 1150 x 800 x 1960 mm Teža: 820 kg V dobrem stanju

Stanje: rabljeno, številka stroja/vozila: 83040, Outreach: 150 mm Test height: 200 mm Space requirement: 350 x 600 x 1410 mm Ledpfx Ahob Dkh Ne Djah

Stanje: zelo dobro (rabljeno), Chamber in very good condition, fully functional. Manufacturer's description: Temperature - Set temperature range - without light, with humidity: +5 to +70 °C - with light, with humidity: +5 to +70 °C - with light, without humidity: 0 to +70 °C - without light, without humidity: 0 to +70 °C - Working temperature range - with light, with or without humidity: +15 to +40 °C - without light, with humidity: +5 (at least 20 below ambient temperature) to +70 °C - without light, without humidity: 0 (at least 20 below ambient temperature) to +70 °C Humidity - Set range: 10 - 90% rh Control technology Lajdpfx Ahexkzx He Dsh - HeatBALANCE function: adjusting the distribution of heating performance between upper and lower heating circuits from -50% to +50% Standard equipment - Factory calibration certificate: standard values +10°C and +37°C, 60% rh at +30°C - Door: fully insulated stainless steel door with 2-point locking (compression latch) - Inner glass door Electrical data - Voltage, electrical load: 115 V, 50/60 Hz - Power consumption: approx. 920 W Packing/shipping data - Approximate dimensions incl. packaging (W x H x D): 930 x 1380 x 930 mm - Gross weight (with packaging): approx. 173 kg

Stanje: zelo dobro (rabljeno), Type: VC³ 7034 Heraeus Vötsch Climate Test Chamber with Humidity (Air-cooled) Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External Dimensions: Width 780 mm x Depth 1758 mm x Height 1800 mm Technical Data for Temperature Tests: Temperature range: -70°C to +180°C time deviation: ±0.1 to ±0.5 K spatial deviation: ±0.5 to ±1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 3.0 K/min Cooling: 3.0 K/min Technical Data for Climatic Tests: Temperature range: -70°C to +180°C Temperature deviation in stabilised state, according to IEC 60068-3-5 depending on test chamber temperature time deviation: ±0.1 to ±0.3 K spatial deviation: ±0.5 to ±1 K Humidity range: 10% to 98% RH Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW Rated current: 16 A Protection: 16 A slow-blow, customer side Lajdpsxfh Spjfx Ah Dsh Refrigerant: R-404A/R23 Test chamber volume: approx. 335 litres Weight: approx. 515 kg net Buyer information for your safety! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Subject to technical changes and errors. All specifications are subject to confirmation!) We are happy to answer further questions by phone.

Stanje: rabljeno, Statična univerzalna preizkuševalna naprava AllroundLine z dvema preizkuševalnima komorama Naprava za natezne in tlačne preizkuse ZWICK / ROELL tip AllroundLine Z010 / TH2S Letnik: 1996 Tip: BZ010TH2S . 132583/96 . 406678 Izvedba: Namizna preizkuševalna naprava Preizkusna sila: 10 kN (1000 kg) Višina preizkusne komore: 1458 mm Širina preizkusne komore: 440 mm Hitrost prečke: mm/min Ločljivost pogona: 0,0625 μm Ponovljivost: ±2 μm Moč motorja: 500 W Električni priključek: 230 V, 50 Hz Nazivni tok: 3 A Poraba energije: 800 VA Vmesnik: RS485 – za izvaja nateznih, tlačnih in upogibnih preskusov na vzorcih materialov, komponentah in sestavnih delih – z upravljanjem TH2S (krmiljenje stroja) – izhod podatkov prek RS485 – 1x merilna celica za merjenje tlačnih in nateznih sil, AST tip KAF-W (Angewandte System Technik GmbH, letnik 2013) Stroj se prodaja brez računalnika in programske opreme, nameščena je le opisana merilna celica. Laedpexanrxofx Ah Dsh Prostorske zahteve Š x G x V: 1000 x 650 x 1920 mm Teža: ca. 220 kg V dobrem stanju.

Stanje: zelo dobro (rabljeno), The Thermo Scientific Heraeus Biofuge Primo R centrifuge enables both high-throughput and low-throughput processing thanks to optional rotors and accessories, with a maximum speed of up to 15,000 rpm. This compact, high-performance refrigerated centrifuge ensures efficient and flexible sample processing. The Primo R features automatic rotor recognition and imbalance detection, along with uniform temperature control. Primo R is ideally suited for small medical labs, biochemical research, molecular biology, and routine analysis in industrial laboratories. Typical applications include sedimentation of cells (algae, yeast, bacteria, etc.), sedimentation of cellular organelles and cell fragments, DNA sample and protein precipitate preparation, blood and urine analysis, and centrifugation of standard test series in microliter tubes. This refrigerated centrifuge is supplied with both fixed-angle and swing-out rotors. Technical specifications: Voltage: 220-240 V Current: 2.9 A Power: 490 W Maximum centrifuge speed: 15,000 rpm (adjustable in 10 rpm increments) Minimum centrifuge speed: 300 rpm Ledpfx Ahot Eva Ij Djah Maximum RCF: 21,855 x g Temperature range: -9 to 40°C Noise level at maximum speed: < 60 dB Rotor recognition: automatic Imbalance detection: electronic Safety features: lid lock and safety interlock Rotor 1 specification: Number: 7591 Type: swing-out rotor Maximum speed: 4,000 rpm Maximum RCF: 2,585 x g Maximum capacity: 4 x 100 mL

Stanje: zelo dobro (rabljeno), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weather effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details - UV Spectrum: approx. 290–450 nm (UVA/UVB) - Lamp Type: Fluorescent UV lamps - Temperature Range (UV phase): approx. +20 to +80 °C - Climate cycling: Alternates between UV exposure, condensation, and spray phases - Humidity range: approx. 10% ... 95% r.h. (relative humidity) at temperatures above approx. +10 °C - Temperature change rate: approx. 3 K/min - Test chamber dimensions (HxWxD): 750 x 650 x 400 mm - External dimensions (HxWxD): 1800 x 920 x 1345 mm Lsdpfx Aoxdl Ixjh Doah - Voltage: 3/N/PE AC 400V +10% 50Hz - Rated power: 9.0 kW Rated current: 15.0 A - Refrigerant: R 404A Important information for your peace of mind as a buyer: The following procedures are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical data subject to change, errors and omissions excepted.) We are happy to answer further questions for you by phone.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Binder FED 115 Laboratory Oven from 2025, ex-demo unit. Model FED 115 | Drying and temperature chambers with forced convection and extended timer functions Advantages - Best energy efficiency in the market - Excellent temporal and spatial temperature accuracy - USB port for data recording - Temperature range up to 300°C PRODUCT DESCRIPTION The BINDER FED Avantgarde.Line temperature chamber offers virtually unlimited performance possibilities and is exceptionally easy to adapt. With extended timer functions and an adjustable fan, temperature and convection conditions can be precisely controlled. KEY FEATURES Temperature range: - Ambient temperature plus 10°C up to 300°C - Up to 30% lower energy consumption compared to standard market solutions - High temperature accuracy thanks to APT.line™ technology - Adjustable fan speed - Controller with LCD display and enhanced timer functions - Electromechanical exhaust air flap control - 2 chrome-plated wire shelves - Stackable design - Integrated independent, adjustable class 2 (DIN 12880) temperature safety device with visual alarm Lodexftfzjpfx Ah Deah - Ergonomic handle design - Ethernet interface - USB port for data recording

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) Lsdpoxdi Ezefx Ah Doah For any further questions, feel free to contact us by phone.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Binder M 400 from 2025, showroom dryer in as-new condition Model M 115 | Drying ovens and temperature chambers with forced convection and advanced programming capabilities Advantages: - Uniform temperature control thanks to APT.line™ preheating chamber - Identical test conditions throughout the entire usable volume, regardless of sample size and quantity - Excellent thermal insulation for lower operating costs - Advanced programming capabilities Laodpfxexftb No Ah Djh PRODUCT DESCRIPTION With a maximum temperature of +300°C and versatile programming options, the M series material test chambers are ideal for material testing as well as aging tests. High air throughput, provided by a powerful fan, enables rapid heating. KEY FEATURES Temperature range: +23°C above ambient temperature up to +300°C High temperature accuracy thanks to APT.line™ technology with increased heating capacity Reinforced, speed-adjustable fan Electromechanical exhaust air flap control Intuitive touchscreen controller with segment and real-time programming 2 chrome-plated wire shelves Independent, adjustable class 2 (DIN 12880) temperature safety device and independent class 3.1 (DIN 12880) over-temperature protection with optical/acoustic alarm selectable on the controller Failsafe function – backup PT100 sensor Interface for connection to a PC: Ethernet Internal data logger, measurement values in open format readable via USB

Stanje: rabljeno, Type: Erichsen 606/1000L For sale is a high-quality Erichsen 606/1000L corrosion test system. This equipment is ideal for conducting salt spray and condensation tests to assess the corrosion resistance of coatings, metals, and surface materials. Standards & Applications: Suitable for tests according to DIN EN ISO 6270-2, DIN 50958, ISO 11503, ASTM D2247, BS 3900 Part F2, and ISO 9227. Perfect for quality control, research & development in the automotive, coatings, and metal industries. Technical Data: Test chamber volume: 1000 l Capacity: approx. 180 specimen holders Test temperature range: Ambient temperature up to +50 °C Power supply: 400 V / 3~ / 50 Hz Power consumption: approx. 4320 VA Laedpfsxdcqwox Ah Djh Air connection: 4–10 bar, approx. 15 l/min at 6 bar Water connection: 2–6 bar Dimensions (W×D×H): approx. 1820 × 1000 × 1900 mm Weight: approx. 150 kg Condition: used Scope of delivery: (See photo) Test chamber (1000 l) Control unit with touchscreen operation Dosing unit for spray solution Air circulation pump (Specifications and technical data subject to change and error!) For further questions, please feel free to contact us by phone.