Stanje: rabljeno, Leto izdelave: 2011, AXES Working area X-Y-Z axes * mm: 3050-1300-180 Workpiece length in pendulum operation mm: 1390 Stroke X-Y-Z axes mm: 3460-1735-250 Max. traverse speed X-Y axes m/min: 60 WORK TABLE Number of workpiece supports and vacuum suction pads: 6 / 2 standard type Standard end stops / position: 1 / rear Vacuum pump m³/h: 90/108 DRILLING UNIT Vertical spindles std./number/speed rpm: 12 (8X-5Y) / 4000 Horizontal spindles std./number/speed rpm: 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/rpm: 120 / 6000 Motor power kW (hp): 2.2 (3) ELECTROSPINDLE Motor power std. / opt. (S6) kW (hp): 7.5 (10) / 11 (15) Max. speed rpm: 24,000 Tool changer, traveling with the support in X: 4 positions, pneumatic INSTALLATION Installed power KVA: 23–28.5 Compressed air requirement Nl/min: 450 Duedpfxeyymz Uj Altow Extraction air requirement m³/h: 1900+1900 (3400) Required extraction air speed m/sec: 30 Extraction port diameter mm: 150+150 (200) Machine weight kg: 3000 * X Distance between stops – Y cutter center as reference; Z workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center in frame design with work table equipped with adjustable workpiece supports and vacuum suction pads, suitable for: - Vertical drilling on the panel surface - Horizontal drilling on all four panel sides - Groove milling with disc cutter in the X direction - General milling operations Self-supporting structure and work table: Steel welded frame construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or optionally different support carriers. Box-type construction made from cold-rolled steel with internal reinforcement ribs, protective covers with component group consisting of a drilling head with vertical and horizontal spindles, integrated grooving and saw unit, and an SCM electrospindle with quick-change tool system type HSK 63 F. Travel paths of the portal and support carrier: Movement in the X, Y, and Z axes takes place on linear prismatic recirculating ball guides with preloaded bearings. Movement transmission of the X-axis (moving stand) is via a preloaded, backlash-free rack-and-pinion drive with helical gears. Movement of the support carrier in Y and Z directions is via preloaded ball screws. Positioning of the working units and machine functions is managed by "brushless" AC servomotors and digital drives. CNC CONTROL UNIT The control unit consists of a numerical control for milling and drilling machines and a connected PC with a graphical user interface "XILOG PLUS". - PC-Office operating system Windows XP - Color LCD screen 17" - QWERTY keyboard - Swivelling control panel - Machine interface software Xilog Plus Xilog Plus features: Programming - Parametric, graphical and ISO programming - Import of DXF and ASCII files - Straight line or circular interpolation in three axes, linear in space, spiral on the chosen plane - Assisted programming with graphical and syntax help for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on inclined or curved panel edges - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional features - Calculator for direct data transfer - S

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F Dusdpfxsxy Tmns Altsw 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Stanje: rabljeno, Leto izdelave: 2016, Delovno polje: X=3300 mm Y=1280 mm Z=150 mm Višina prehoda Upravljalni terminal: 24" barvni LED zaslon Ročni terminal za upravljanje hitrosti osi Programska oprema: "Woodflash" Vakuumska črpalka 90 m³/h/50 Hz oziroma 108 m³/h/60 Hz Rezkalno vreteno 12 kW HSK F63 (12.000 vrt./min) 12-pozicijski linearni menjalec orodja na levi strani stroja + pick-up prostor Vrtalna glava DH 16 4H 2S: 12 navpičnih vreten 4 vodoravna vretena 2 utorni žagi Lokacija skladišča: Nattheim Dusdpfexy Tlwex Altsw

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, številka stroja/vozila: 390.829, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 6.700 h, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, dolžina obdelovanca (maks.): 5.600 mm, širina obdelovanca (maks.): 1.000 mm, višina obdelovanca (maks.): 60 mm, teža obdelovanca (maks.): 75 kg, število osi: 1, število mest v zalogovniku orodij: 1, vrsta aktuacije: električni, skupna višina: 1.409 mm, skupna dolžina: 1.484 mm, skupna širina: 2.325 mm, širina mize: 1.000 mm, Oprema: CE označba, Due to the acquisition of a new machine, we are offering for sale our Gannomat Protec 571 CNC machine, purchased new in 2018. The Gannomat Protec CNC machining center is a high-precision woodworking machine designed for efficient drilling, milling, and grooving operations. Engineered for versatility and accuracy, it is ideal for processing furniture components and panels. With advanced automation and robust construction, it ensures repeatable results and time savings in production. This machining center is particularly suitable for workshops aiming to optimize productivity and achieve seamless processing operations. Technical specifications: Workpiece width X: 60 - 1000 mm Workpiece length Y: 250 - 5600 mm Workpiece height Z: 6 - 60 mm Workpiece weight: 75 kg Fast machining: 21 drilling spindles Stable grooving unit: 8.3 mm saw blade width Powerful milling unit: 5.5 kW (S1), with reversible rotation direction Compact footprint: Less than 3.3 m² Supplied with the machine: - Drilling tools and 1 pc HSK63 chuck and tool for operations required in modern woodworking shops. Optional software: - Gannomat Editor office software: 1000 EUR (installation and activation by Gannomat for an additional fee) - DXF postprocessor for efficient operation: 1000 EUR (installation and activation by Gannomat for an additional fee) Duodpfxszhrdzs Altew NOTE: Low operating hours The price of the machine does not include VAT.

Stanje: rabljeno, številka stroja/vozila: 008359, Delovno območje os X: 2500 mm Delovno območje os Y: 1320 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 13 kW Število krmiljenih osi: 4 osi Število vrtalnih vreten: 16 Dedex Swcaspfx Altjuw Število mest za orodja: 22

Stanje: rabljeno, številka stroja/vozila: 007686, Working area X-axis: 3765 mm Working area Y-axis: 1560 mm Working table: nesting table Main spindle power: 13.2 kW Dedpfeu Tliysx Altouw Number of controlled axes: 3 axes Number of drilling spindles: 18 Number of tool positions: 12

Stanje: rabljeno, številka stroja/vozila: 008389, Delovno območje os X: 8417 mm Delovno območje os Y: 1930 mm Dujdpfx Asyqxxrsltsw Delovna površina: Z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 13,2 kW Število krmiljenih osi: 4 osi Maksimalna višina roba: 60 mm Število vrtalnih vreten: 40 Število orodnih mest: 22

Stanje: rabljeno, Leto izdelave: 2016, TECHNICAL DATA AXES Max. Workpiece Dimensions X-Y-Z mm: 3050 x 800 x 50 Min. Workpiece Dimensions X-Y-Z mm: 300 x 90 x 10 Working Area Drilling/Grooving mm: 0 x 800 / 0 x 800 X-Axis Stroke mm: 750 Max. Traverse Speed X-Y Axes m/min: 25 DRILLING UNIT Vertical Spindles: - Number: 7 (4X-4Y, one shared) Horizontal Spindles (along Y-axis): - Number: 2 (1+1) Horizontal Spindle (along X-axis): - Number: 1 Fixed Grooving Saw (Direction): X Saw Blade Diameter mm: 100 Max. Saw Blade Thickness mm: 5 Motor Power kW (HP): 1.5 (2) Spindle Speed rpm: 3350 Saw Blade Speed rpm: 4300 INSTALLATION Power Supply V (Hz): 380 / 400 (50/60) Installed Power kVA: 4.5 Compressed Air Requirement bar: 6 Compressed Air Consumption Nl/cycle: 90 Extraction Requirement m³/h: 1200 Extraction Air Speed m/sec: 20 Extraction Port Diameter mm: 80+80 F10L Drilling Unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles: 32 mm - 2 horizontal drilling heads: 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill holder D10 mm) - Speed: 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed: 4300 rpm - Motor power: 1.5 kW - Vertical pneumatic stroke per spindle: 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece Positioning and Drive of the Working Unit A CNC-controlled vacuum suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along the X and Y axes is via THK rails with transmission on reinforced toothed belts. Movement in the Z axis is pneumatic on ball bushing guides, with stops adjustable via the end position. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system is specifically designed for use in drilling and milling machines. - CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and any faults or errors displayed in the operator's language Programming - Programmed via CN - Automatic optimization of drilling operations - Option for plate zero-point shift - Option to save and import drilling programs via USB dongle - Option to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the operating manual - Graphic display of aggregate configuration Vacuum Suction Cup "B-Power" vacuum suction cup with dual vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine Operating Interface Software: Xilog Maestro USB Hardware and Software Requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min.; multicore processor recommended - Memory: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The package includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphical programming - Supported programming with graphical and syntax aids for drilling operations - Ability to create and save machining macros Integrated Additional Functions Djdpovvi I Rjfx Altsuw - Self-diagnosis and error reporting in the operator's language - User interface in

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Djdpjvwbp Aefx Altjuw

Stanje: rabljeno, Lokacija skladišča: Nattheim Djdpfx Ajvvi E Nsltouw

Stanje: rabljeno, Lokacija skladišča: Nattheim Dusdpfxsvvi Hae Altjw

Stanje: rabljeno, Leto izdelave: 2011, Obdelovalna velikost v X-smeri: 2770 mm Obdelovalna velikost v Y-smeri: 1220 mm Obdelovalna debelina (Z-mera): 80 mm Zasnova stroja: portalni stroj Moč glavnega vretena: 11,0 kW Hitrost glavnega vretena: 1500 - 24.000 obr/min Vektorsko vodeno vreteno: Da Vpenjalni sistem: HSK 63 F Hlajenje vretena: zračno hlajenje Število osi: 3 Menjalec orodij: Da, kos Število mest za menjavo orodij: 10 kos Pisalniška tipkovnica: Da Miška: Da Programski sistem: Xilog Plus DXF vmesnik: Da Možna spletna povezava: Da CD-ROM pogon: Da Izvedba mize: rešetkasta miza Ustavljalni sistem: ustavljalni valj Število vakuumskih črpalk: 1 Dsdpfevvi Htsx Altsuw Moč vakuumske črpalke: 250 m³/h Zavarovanje: varnostne pohodljive preproge Lokacija skladišča: Sonnefeld

Stanje: rabljeno, Leto izdelave: 2004, Lokacija skladišča: Nattheim Dsdovvi Hyopfx Altouw

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Dedpfx Aswmm Nrjltsuw

Stanje: rabljeno, Leto izdelave: 2000, Lokacija skladišča: Nattheim Dsdpfx Ajvvi Ikjlteuw

Stanje: rabljeno, Leto izdelave: 2021, Expozicijska enota (malo rabljena) Enota za rezanje mehkih materialov, kot so satovje, akustični elementi in tkanine, z nihajnimi gibi Možnosti obdelave: rezanje ravnih ali radialnih izrezov Tipična področja uporabe: • Tekstil: rezanje tkanin ali tekstilij (npr. usnje, klobučevina itd.) • Razrez satovja pri vratih, stopniščni gradnji, sejemski gradnji, gradnji avtodomov • Akustični elementi: rezanje poliestra, pene ali drugih zvočno absorpcijskih materialov • Letalstvo, ladjedelništvo, vesoljska industrija: rezanje satovja (honeycomb core) Tehnične specifikacije Največja vhodna hitrost vrtenja: 6.000 min-1 Največja izhodna hitrost vrtenja: 9.000 min-1 Prenos: 1 : 1,48 Največji navor: 8 Nm Dovoljena obratovalna temperatura: maks. 85°C Položaj nosilca navora glede na orodje: 360° Kot obdelave: 0° Št. izhodov za orodje: 1 / fiksno Mazanje: mast / polnjenje za celotno življenjsko dobo Amplituda: 4 mm Frekvenca: 150 Hz Lokacija skladišča: Garbsen. Duedpfxjvvi Iqo Altjw

Stanje: rabljeno, Leto izdelave: 2021, Razstavni agregat (malo rabljen) Mazanje: mast Največja izhodna hitrost n2: 4.000 min⁻¹ Prenos (n1:n2): 1:0,8 Teža: cca 8 kg Priklop na stroj HSK F63 Oprijem orodja Uporabna širina 24 Lokacija skladišča: Garbsen Dodpovvi Iwefx Altsuw

Stanje: rabljeno, Leto izdelave: 2002, Obdelovalne mere (premer orodja 25 mm): X=3015 mm Y=1483 mm Z=325 mm Maks. hodilci: X=3268 mm Y=1483 mm Z=325 mm največja programska hitrost: X/Y = 75 m/min / Z = 30 m/min Orodni nosilec HSK 63F Vrtalna enota 7964, 14 vertikalnih vrtalnih vreten s 32 mm razdaljo (10 v x / 4 v y) Žagalna enota 7946, 3,6 kW, pnevmatsko vrtljivo za 90° Glodalna enota 7933, 9 kW Lesena C-os (vektorska os) Magazin za orodja (krožnik s 6 mesti) Ročna upravljalna naprava Laserska naprava (pozicioniranje sesalcev) PC upravljalna konzola z 17" monitorjem Operacijski sistem Windows 2000 Programska oprema: TwinCAM32 - office verzija Vakuumska črpalka 100 m³/h suhi tek Selektivne varnostne stopalne preproge (3-polno delitev) Lokacija zaloge: Nattheim Duedpfx Alevvi Nbjtjw

Stanje: rabljeno, Leto izdelave: 2014, Število vrtljajev: 1450 vrt/min Motor: 2,4 kW Sesalna zmogljivost / volumenski pretok: 70 m³/h Sesalni tlak: 3 mbar Rezervoar: Obratovalni nadtlak 0,99 bar Prostornina / litrov: 90 Obratovalna temperatura: 50°C Leto izdelave: 1989 Št.: 400 100 Lokacija zaloge: Dobavitelj Dodpevvi Nnjfx Altsuw

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The machine base is a monolithic design made from thick-walled steel. It is reinforced throughout the entire machine bed with welded triangular plates, which ensures exceptional rigidity. The use of a large-base triangular form in load-bearing components is key to ensuring lasting precision and stability. The machine layout allows an optimal workflow for the operator while requiring minimal space. This robust base offers the processing unit a balanced and secure foundation with excellent load distribution. The mobile gantry unit carrier is built from a solid monoblock. It moves in the X direction on prismatic, ground guides with recirculating ball carriages. Mounted on the mobile unit carrier, the processing unit also travels on prismatic, ground guides and recirculating ball carriages. Axis Movement: The drive system in the Y and Z axes utilizes precision-ground recirculating ball screws of the highest accuracy grade. The drive in the X-axis is by a backlash-free, preloaded precision rack and pinion system. This enables balanced load distribution during positioning. Such characteristics are essential for smooth operation, even in complex machining scenarios. Axis movement is powered by brushless AC servo motors, which provide excellent positioning speeds thanks to very short ramp times. The feedback systems are fully integrated into these motors, making the drive system entirely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection): 0.9 bar Control System / Control Cabinet · Office PC or industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote controller with main functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC provides the NC control with a unique level of familiarity: the software operates on Windows XP and allows fast and easy programming, which is also easy for inexperienced users to learn. The system is open, supporting connections for CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Installation of all network systems and any commonly available CAD programs is also possible. To save space, the control cabinet is located beneath the machine table, and the operator works from a separate, mobile control terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software Features: Dujdpfjvvi Nzex Altow - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Supported programming - Calculator for direct data transfer - Graphics and syntax help for drilling and milling operations - Parametric programming to perform identical panel processing on different p...

Stanje: rabljeno, Leto izdelave: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Drilling and milling, made for you! This numerically controlled machining center comes equipped with a comprehensive range of milling/drilling tools to meet any requirements for processing wood and similar materials. - Highly efficient, equipped with drilling spindles at 8,000 rpm and the most robust spindle technology available on the market, offering more than 1,000 maintenance-free operating hours. - Superior and more comprehensively equipped: various configuration options via the multifunction table, allowing the machine to be optimally equipped according to specific requirements. Duodpfx Asvvi N Ioltow - Easier and more intuitive programming, thanks to the integrated Maestro CNC CAD/CAM module. - User-friendly: The work table is always accessible, the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no safety barriers. Load-Bearing Structure The load-bearing structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid. The especially wide support surface was specially designed to provide the machine with maximum stability, ensuring lasting precision regardless of operating conditions, and does not require anchoring to the floor. The base forms a large and solid support for the moving gantry: the work unit is thus equipped with a balanced, stable, and highly resilient support, capable of withstanding even the most demanding stress loads, leading to improved performance quality and greater accuracy. The moving gantry is a solid single component anchored to both sides of the base and slides along prismatic guides with recirculating ball shoes of the highest quality. Dual motorization along the X-axis ensures top performance even under heavy-duty operating conditions. Movement of the lower mobile unit (X-axis) and the working unit along the beam of the mobile unit (Y-axis) is achieved via a helical rack and pinion drive. This provides greater tooth-on-tooth engagement, achieving higher acceleration as well as increased speed along the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring the finest machining quality by eliminating vibrations. Movement along X-Y-Z axes is provided by brushless motors, powered by static inverters, delivering: - Reduced processing times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No more reference point setup at machine startup due to absolute encoders - Eliminated general maintenance for the drive system since the brushless system contains no brushes Management of axis movements and general machine components is performed via an industrial NS module with digital D...

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The base frame structure is a monolithic construction made from thick-walled steel. It is reinforced with welded triangular steel plates across the entire machine bed, resulting in exceptional stability. The triangle shape with a wide base used for load-bearing components is the secret to ensuring long-term precision and stability. The machine layout allows the user to achieve an optimized workflow while minimizing the required footprint. The base structure supports the machining unit with a balanced and secure foundation, offering particularly effective load distribution. The mobile gantry-style aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis on precision-ground prismatic guides via linear ball bearing carriages. On this carrier, the machining unit is also mounted on prismatic, ground guides and linear ball bearing carriages. Axis Motion: The drive system for the Y and Z axes uses precision-ground ball screws of the highest accuracy class. The X axis is driven by a backlash-free, preloaded precision rack and pinion system, ensuring balanced load distribution during positioning. This characteristic is essential to guarantee smooth motion, even in complex operations. All axis movements are performed by brushless AC servomotors. These deliver excellent positioning speeds due to their very short ramp-up times, and their measuring systems are fully integrated. These features make this type of drive completely maintenance-free. · Rapid traverse X: 40 m/min · Rapid traverse Y: 60 m/min · Rapid traverse Z: 22.5 m/min Vacuum System (Basic) Djdpfjvvi Rfex Altjuw · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control System / Control Cabinet · Office PC or Industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote control unit with essential functions ELECTRICAL/ELECTRONIC CNC CONTROL The universal system is equipped with a powerful NC control. The integrated office PC brings a unique level of familiarity to the NC control: the software runs on Windows XP, allowing fast and easy programming, which can be quickly mastered even by inexperienced users. The system is open and accommodates the connection of CD-ROM drives, audio cards, barcode scanners, modem, printer, scan systems, etc. Installation of all standard network systems and all commercially available CAD programs is possible. To save space, the control cabinet is installed beneath the machine table; the operator works at a separate mobile terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I, GB, F, D, E) - Linear and circular interpolation in three axes, spatially linear, spiral in the selected plane - Supported programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to allow identical panel processing on different

Stanje: rabljeno, Leto izdelave: 1999, Lokacija skladišča: Nattheim Duodpfjvvi Rxjx Altow

Stanje: rabljeno, Leto izdelave: 1995, Lokacija skladišča: Dobavitelj Duedpfovvi Sisx Altsw

Stanje: rabljeno, Leto izdelave: 1995, Lokacija skladišča: Nattheim Dusdpfx Aljwkirqstew