Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, TEHNIČNE PODROBNOSTI Gjdex Ahgujpfx Ab Tjkf Število rezkalnih vreten: 1 kos Število krmiljenih osi: 5 kos Vrsta rezkalne mize: nosilna miza PODROBNOSTI O STROJU Teža: 3.450 kg OPREMA Dokumentacija Oznaka CE

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.680 mm, pomik osi Y: 1.260 mm, pomik po osi Z: 150 mm, TEHNIČNE PODROBNOSTI Delovno območje: 3.680 x 1.260 x 150 mm Rezkalni motor: 1 kos, 8,5 kW (11,5 KM) Menjalnik orodij: 1 avtomatski rotacijski z 12 pozicijami Vrtalna greda: 18 vertikalnih, 8 horizontalnih vrtin in 1 'X' žagin vrtalnik Gkjdpjxzfx Eefx Ab Tsf Programska oprema: združljiva z DXF Varnostni standard: BUMPER zaščita, CE standardi Teža: 3.000 kg Opomba: Stroj ima programsko težavo in nima črpalke. Stroški popravila so ocenjeni na približno 3.000 € za vsako.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 4.600 mm, širina obdelovanca (maks.): 2.200 mm, višina obdelovanca (maks.): 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Holz-Her 5-axis nesting machining center DYNESTIC 7535 Working area: 4600 x 2200 mm. Vector speed: 128.0 m/min. The milling spindle has a power output of 13.0 kW (S6) and accommodates tools up to a maximum diameter of 350 mm via an HSK interface. Drilling unit with 24 spindles, comprising 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head is equipped with an integrated saw unit for a saw blade with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position rotary tool changer, pneumatically liftable with a cover to protect the HSK 63F holders, as well as a single-position pick-up changer for a saw blade with up to 350 mm diameter. Pneumatically retractable stops integrated into the table for special machining on the nesting table or for use with vacuum pods. Gkjdpfxsx E Ah Io Ab Tsf 750 m³/h vacuum capacity, divided across 2 pumps with 500 m³/h and 250 m³/h respectively, intelligently managed via ECO-VAC software. The table features a 16-zone vacuum system for focused vacuum application. The pre-installed push-off unit is connected to the extraction system and can be used to clean panels and/or the nesting table.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 25.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AA2/001307, potovalna razdalja osi X: 6.500 mm, pomik osi Y: 1.700 mm, pomik po osi Z: 250 mm, hitro pomikanje X-os: 60.000 m/min, hitri pomik os Y: 45.000 m/min, hitri pomik na osi Z: 30.000 m/min, dolžina podajanja os X: 6.500 mm, dolžina pomika po osi Y: 1.300 mm, dolžina podajanja os Z: 1 mm, hitrost pomika os X: 6.000 m/min, hitrost podajanja osi Y: 45.000 m/min, hitrost podajanja os Z: 30.000 m/min, nazivna (navidezna) moč: 15 kVA, proizvajalec krmilnikov: NUM, model krmilnika: 1040, dolžina obdelovanca (maks.): 6.500 mm, širina obdelovanca (maks.): 1.350 mm, višina obdelovanca (maks.): 180 mm, skupna višina: 2.750 mm, skupna dolžina: 8.000 mm, skupna širina: 4.000 mm, širina mize: 1.350 mm, višina mize: 950 mm, dolžina mize: 6.500 mm, hitrost vretena (min.): 24.000 obr/min, moč vretenovega motorja: 11 W, Working directions of axes X-Y-Z 6500 x 1350 x 250 mm Working area 6500 x 1250 mm Gedpfxew Au N Se Ab Tokf C-Axis = 640, B-Axis =270 Milling unit PRISMA wit 5 interpolating axes X, Y, Z, C, B Electric spindle 11 kW, 600-20.000 rpm Tool holder HSK63 Working table with TVN pads and vacuum suckers Cross laser projector on the working table TVN vacuum sucker Pneumatic clamps Tool magazine 24 holders Drilling unit Vacuum pump 5,5 kW 250 m³/h CNC control NUM Operating system: Windows XP Xilog Plus Maestro Weight approx. 5450 kg

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Ta stroj ESSETRE TECHNO je bil izdelan leta 2007. Gre za CNC obdelovalni center za les z Z-osnim hodom 1320 mm ter največjo močjo elektrovretena 12 kW pri 7000 vrt./min. Stroj omogoča uporabo orodij dimenzij od 3 do 30 mm z ročnim vpenjalnim sistemom. Idealen je za različne obdelovalne procese v lesarstvu. Za dodatne informacije o stroju nas kontaktirajte. Gsdpfxex D Nvte Ab Tjkf Področja uporabe CNC obdelava lesa

Stanje: rabljeno, Leto izdelave: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3100 mm (without tools) Processing dimension in Y-direction: 2200 mm CAMPUS V7 CAD/CAM software, 1 license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS 'Better Nest' free-form nesting software" Uninterruptible Power Supply - UPS Milling unit 7830, power output: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 drilling unit, complete with 14 spindles, drive power 3 kW Integrated saw unit for sawing/grooving in X-direction n(max.) 1000-7330 rpm, steplessly adjustable 1 rear stop bar for processing field (field D), rear with 1 side stop (replaces side stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with integrated HSK holder cover 2 additional holders for HSK mounts for tool changer 7873 Tool changer 7872, single-position aggregate magazine, swivels in X and Y direction 2 x vacuum pumps 140 m³/h dry-run Vacuum unit complete, (VP8) 250 m³/h, 400V, additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, full alignment point laser, complete option ZB8 Lubrication, complete central lubrication, drive side 2 x vacuum suction cups for smooth table surfaces, complete, 140 x 115 mm, height 30 mm, with connecting hose 2 x vacuum suction cups for smooth table surfaces, complete, 120 x 50 mm, height 30 mm, with connecting hose Conveyor belt, complete pusher conveyor AUT 5 10.7 pusher table Godpfx Absx Enpwe Tokf Additional extraction via pusher conveyor Pusher at travelling stand, controlled Incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Stanje: novo, Leto izdelave: 2026, CNC avtomatski stroj za vrtanje in vtikanje moznikov za popolnoma avtomatsko vrtanje, lepljenje in vtikanje moznikov. Vrtalno in moznizno obdelovalni center s kompaktnostjo, učinkovitostjo, kakovostjo in prilagodljivostjo. Gkodpodx R Dfofx Ab Tsf Kratek opis: • Univerzalni CNC upravljani stroj za vrtanje in vtikanje moznikov • Nadzor izstreljevanja lepila preko GIC • Zaprt lepilni sistem • Primeren za obdelavo plošč in masivnega lesa • Opcijsko dodatne horizontalne in vertikalne vrtalne vretena • Razi razbremeni CNC obdelovalne centre • Optimalna dopolnitev za stroje za gnezdenje

Stanje: rabljeno, Leto izdelave: 2010, vklj. orodje Delovna površina: 3005 x 1250 mm z 12-pozicijskim menjalnikom Gksdoxlf A Sjpfx Ab Tjf Skladiščna lokacija: Sonnefeld

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 4.580 mm, širina obdelovanca (maks.): 1.650 mm, višina obdelovanca (maks.): 300 mm, premer orodja: 350 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machining Center 7235 Demonstration Machine Machining area: 4580 x 1650 mm, maximum workpiece size for edge routing (minus cutter radius). Maximum panel width: 1,660 mm, maximum workpiece height: 300 mm. Gkedpfox E Afmex Ab Tef Easy and quick suction cup positioning with the Holz-Her VI.SE LED table. The various colored LEDs display the positions of the consoles and suction cups, including the rotational angle for rotatable cups. 8 consoles, each equipped with 2 suction cups, and electronic stop monitoring. The routing spindle delivers 13.0 kW of power and accommodates routing tools with a maximum diameter of 200 mm via an HSK interface, as well as saw blades up to 350 mm—ideal for heavy-duty machining, such as solid wood applications. 35 drilling spindles: 25 vertical and 10 horizontal. Two saw units each in X and Y axes, for saw blades up to 125 x 4 mm. 24-position disc tool changer and 14-position pick-up changer, plus a single-blade magazine for 350 mm saw blades, provide maximum flexibility in tooling. Safe Detect – safety monitoring system instead of safety mats or light barriers. Integrated waste transport conveyor in the machine base. And many other features.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Machine Data • Gantry system with fixed table and moving bridge for minimal footprint • Base, gantry, and gantry uprights made from steel, welded as one piece, stress-relieved and machined Gedpfxex E Ttbo Ab Tjkf • Main machine assemblies constructed from ribbed welded structures, optimized for a high rigidity-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized via Finite Element Analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading with a forklift or overhead crane • Ground precision linear guides with high preload and additional cover strip for optimal chip removal on all axes • Brushless digital AC servo motors and controllers on all axes • Dual-sided synchronized drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screw with double-supported end bearings on the Z-axis • Precision planetary gearbox with minimal backlash • Enclosed cable drag chains to protect trailing cables from chips and dust • High-quality shielded drag chain cables for robust protection against interference and failures • Working area X-axis: 1,540 mm • Working area Y-axis: 1,540 mm • Z-clearance: 150 mm • Z-travel: 200 mm • Network connection via Ethernet • Remote servicing via Internet FlexiCAM Control • DIN-ISO 66025 G-code compatible • Includes TCP/IP network connection • 256 Mb RAM • Easy operation via handheld terminal with display Spindle with Manual Tool Change • Power consumption 2.2 kW • Stepless programmable speed from 5,000 – 24,000 rpm • Cooling via integrated electric fan Manual Tool Change Dust Extraction Device • Hose connection 80-90 mm diameter FlexiCAM Midrange Vacuum Table (side channel blower) • T-slot profiles, individual ball valves, 6 zones • Side channel blower 7.5 / 9 kW • Approx. 558 m³/h (50 Hz) or 654 m³/h (60 Hz) Safety Equipment • CE-compliant according to DIN EN 13849 • Includes EMC filter, emergency stop • Light curtain system controlled via machine controller

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1691, skupna dolžina: 13.500 mm, premer žaginega lista: 760 mm, vrsta vhodnega toka: trifazni, delovna višina: 300 mm, skupna masa: 12.500 kg, delovna širina: 450 mm, največja višina reza: 300 mm, največja širina rezanja: 450 mm, vhodna napetost: 380 V, FOR SALE: CNC MACHINE HUNDEGGER K1-A I am selling a well-maintained and reliable Hundegger K1-A CNC machine, year 1997. The machine has been regularly serviced and received a complete upgrade in 2015 directly by Hundegger (new software and new electronic components). 🔧 Machine Condition Still in daily operation Test run / demonstration available Properly maintained and in excellent technical condition ⚙️ Equipment & Tooling 5-axis saw unit 4-axis universal milling unit Gsdpoxyhmpjfx Ab Tokf 2 vertical drilling units 1 milling unit 2 horizontal drilling units Horizontal notching unit 3-sided marking / drawing unit 📦 Upgrades (Hundegger, 2015) New official Hundegger software New electronic components Improved accuracy, reliability, and performance

Stanje: rabljeno, Working area: 2,600 x 1,250 mm X-axis: 2,700 mm Y-axis: 1,600 mm Z-axis: 250 mm Gkjdon A Dwgjpfx Ab Tef Spindle motor: 7.5 kW Feed rate: Max. 38 m/min Video: Available on request CNC machining center SCM Routech R 3000 for processing panel materials with automatic loading (vacuum destacker) and outfeed. Special price for self-disassembly and self-collection.

Stanje: novo, Leto izdelave: 2026, Vrtanje, lepljenje in vstavljanje moznikov v okenske profile za učinkovito in profesionalno izdelavo okenskih spojev z moznično tehniko. Kratek opis: • Univerzalni CNC krmiljeni stroj za vrtanje in vstavljanje moznikov za okenske in vratne elemente • Nadzor brizganja lepila preko GIC Godpfx Ajdx R A Ujb Tekf • Zaprt sistem za lepilo • Izbirna dodatna horizontalna vrtalna vretena • Razbremeni CNC obdelovalne centre

Leto izdelave: 2011, Stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Ta 3-osni stroj HOMAG WEEKE OPTIMAT BHX 500 je bil izdelan leta 2011. Ponaša se z robustnim CNC obdelovalnim centrom z delovnim območjem 2500 mm x 1300 mm, glavno elektro vreteno ima moč 6 kW, največja debelina obdelovanca pa je 80 mm. Vključuje 84 vrtalnih vreten in dvojni rezkalni vreteni, vsaka z močjo 6 kW pri 18.000 vrtljajih/min. Če želite kakovostne CNC zmogljivosti, razmislite o stroju HOMAG WEEKE OPTIMAT BHX 500, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. Gsdpsx D Nvgsfx Ab Tekf Vrste uporabe CNC obdelava lesa

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable workpiece plate, stationary working head – Horizontal workpiece plate Control system with Biesse Works software Safety cabin for working head – Safety tread mats No. 1 Infeed table (with conveyor belt) left No. 2 Workpiece clamping block stops within the working area No. 1 Outfeed table (with conveyor belt) right Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1000 x 60 Total connected load (kW): 20 WORKING UNITS (TOP): - No. 1 Electrospindle with HSK D-50 adapter (power 4.8 HP) with static frequency converter - No. 1 Grooving saw (fixed in X direction), diameter 150 mm, power 2.3 HP, with static frequency inverter - No. 29 vertical drilling spindles - No. 10 horizontal drilling spindles (8 in X, 2 in negative Y direction) WORKING UNITS (BOTTOM): - No. 1 Electrospindle with HSK D-50 adapter (power 4.8 HP) with static frequency converter - No. 1 Grooving saw (fixed in X direction), diameter 150 mm, power 2.3 HP, with static frequency inverter Gedpjdh Tf Uefx Ab Tjkf - No. 29 vertical drilling spindles - No. 10 horizontal drilling spindles (8 in X, 2 in negative Y direction)

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Machine Data • Gantry system with fixed table and moving portal for minimal footprint • Base frame, bridge, and portal uprights made of steel, welded in one piece, stress-relieved and machined • Main machine components constructed as ribbed welded assemblies, optimized for a high stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using Finite Element Analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high preload and additional cover strip for optimal chip ejection on all axes • Brushless, digital AC servo motors and drives on all axes • Dual-side, synchronized drive on X-axis (gantry drive) Gsdpfx Asx E Tmbeb Tokf • Rack-and-pinion drive on X and Y axes • Precision ball screw drives with double-end bearing units on Z-axis • Precision planetary gearboxes with minimal backlash • Fully enclosed cable drag chains to protect energy supply from chips and dust • High-quality shielded drag chain cables for maximum reliability against faults and failures • X-axis working range 3,120 mm • Y-axis working range 2,190 mm • Z-clearance 200 mm • Z-travel 280 mm • Network connection via Ethernet • Remote maintenance via Internet Panel-Based CNC Control • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance capability • Includes handheld control unit with handwheel • MCP with rotary switches for feed and spindle override • Mobile control cabinet Remote Control Unit • Fast, precise incremental positioning • Handwheel with magnetic detent • Coarse, medium, and fine feed override • Dual-channel emergency stop • IP65 protection rating Milling Spindle • Max spindle power 4 kW • Max speed 30,000 rpm • ISO-25 tool taper • Max 12 mm tool diameter (shank) • Cooled by compressed air • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required by the customer (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration 4 stations • Maximum 20 stations ISO-25 Extraction Device for Automatic Tool Change • Hose connection diameter 110 mm • Automatic lift/lower for tool change Tool Length Sensor • Automatic tool length measurement via M-code • Carbide contact plate • Measuring accuracy 0.001 mm • Contact force 1.5 N • Sensor mounted outside the working area 2x Side Channel Blowers • Max power consumption 7.5 kW • Maximum flow rate 650 m³/h • Rated voltage 400 V • Rated current 14 A • Pressure 39,500 Pa

Stanje: rabljeno, Like-new, unused, sharpened, and used end mills and drills for CNC machines as illustrated by example in the photos. Gjdpovy Apisfx Ab Tekf Length: Various Diameter: Various Shank: Various Weight: 12 kg Application: Woodworking

Stanje: novo, Leto izdelave: 2026, Vrtalni in vijačni stroj za hkratno vrtanje, lepljenje in vbijanje moznika v sistemu 32 mm z večvretensko vrtalno glavo in nastavljivimi postajami za moznike. Gkjdpfx Asdx Aw Nob Tjf Kratek opis: • Univerzalni vrtalni in vijačni stroj za moznike • Zelo enostavno upravljanje • Zaprt sistem za lepilo • Primeren za obdelavo plošč in masivnega lesa • Opcijska dodatna vertikalna vrtalna enota • Razbremeni CNC obdelovalne centre • Optimalna dopolnitev za nesting stroje

Leto izdelave: 2011, Stanje: pripravljen za uporabo (rabljen), Glavni pogon Obseg vrtljajev vretena: 24.000 Moč motorja vretena: 86 kW Število osi: 4 Gkjdpex D Eahefx Ab Tsf Obdelovanec X-območje obdelovanca: 4.200 mm Y-območje obdelovanca: 1.535 mm Z-območje obdelovanca: 230 mm Revolver Tip stožca orodja: HSK-F63 Ta 4-osni BIESSE Rover C6 je bil izdelan leta 2011. Idealna izbira za različna lesnoobdelovalna dela, saj omogoča natančnost in vsestranskost. Izkoristite priložnost za nakup CNC obdelovalnega centra za les BIESSE Rover C6. Za več informacij nas kontaktirajte. Vrste uporabe CNC obdelava lesa

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Moving horizontal table (workpiece), stationary machining head Control system (BiesseWorks software), with separate electrical control cabinet Machining head safety enclosure, safety tread mats Infeed table (workpiece support) at entry side No. 2 pneumatic workpiece clamping cylinders within the working area Gsdpfowb Allox Ab Tjkf Outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm: 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1300 x 60 (approx.) Total connected load (kW): 24 WORKING UNITS (TOP): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW)

Stanje: rabljeno, Serija stebelnih rezkarjev za CNC stroje. Gkjdpfx Asxfitheb Tsf

Stanje: novo, Leto izdelave: 2026, CNC stroj za vrtanje in vstavljanje moznic za popolnoma avtomatsko vrtanje, lepljenje in vstavljanje moznic. Center za vrtanje in obdelavo moznic s kompaktnostjo, učinkovitostjo, kakovostjo in prilagodljivostjo. Kratek opis: • Univerzalni CNC krmiljen stroj za vrtanje in vstavljanje moznic Gsdpedx Axfefx Ab Tskf • Nadzor brizganja lepila prek GIC • Zaprt sistem za lepilo • Primeren za obdelavo plošč in masivnega lesa • Opcijsko dodatna horizontalna in vertikalna vrtalna vretena • Razbremeni CNC obdelovalne centre • Optimalna dopolnitev strojem za razrez po gnezdenju

Stanje: rabljeno, CNC machining center Eima for processing wood. Gedpfx Ajr D T Nbsb Tekf Special price for self-dismantling. Technical data: On request.

Stanje: novo, Leto izdelave: 2026, Prehodna vrtalna stroj z obojestranskim vrtanjem in mozniki v sistemu 32 mm preko večvretenastih vrtalnih glav in nastavljivih postaj za vstavljanje moznic. Gsdpfxodx Axkj Ab Tokf Kratek opis: • Prehodni vrtalni in moznični avtomat s transportnim sistemom za vračanje obdelovancev • Majhne prostorske zahteve za prehodni vrtalni stroj • Opcijski, dodatni vertikalni vrtalni agregati • Zaprt lepilni sistem • Prehodni avtomat za vrtanje za visoko kapaciteto

Stanje: novo, Leto izdelave: 2026, Gannomat ProTec - CNC Throughfeed Machine for Drilling, Grooving, and Milling Operations Brief Overview: • Compact footprint, less than 3.3 m² • Handles large (1000 x 5600 x 60 mm) and small (60 x 250 x 6 mm) workpiece dimensions • Gentle workpiece handling through air nozzles • Precision ensured by dual laser measurement and workpiece alignment • Fast processing with 21/23 drilling spindles • 21/23 drilling spindles allow for zero setup times Godpobiplrsfx Ab Tjkf • Robust grooving unit for saw blade widths up to 8.3 mm • Powerful milling unit 5.5 kW (S1), optional • Automatic tool changer for milling unit, optional CNC-controlled DRILLING, GROOVING, and MILLING on less than 3.3 m² with high processing precision and zero setup time – this is what the GANNOMAT ProTec stands for. TECHNOLOGY: The robust processing unit is equipped with 13 vertical drilling spindles, 8 double horizontal drilling spindles (6Y & 2X), 1 grooving saw on the Y-axis, and 1 milling unit. This configuration allows all commonly used drills/tools to be ready in a single setup and called up as required. This CNC machining center operates from below and can work in both throughfeed and return-to-operator modes. Steel support tables with air nozzles provide a reference for horizontal drilling, and, combined with robust workpiece clamps and an additional 4th axis at the drilling head, allow for highly precise drilling. A contactless laser sensor detects actual workpiece edges (top and bottom), enabling automatic correction and adjustment of the drilling program. APPLICATION AREA: ProTec offers high-end technology for both operation and application and was developed as an entry-level CNC model for small and medium-sized workshops and, alternatively, as a secondary machine to standard machining centers to prevent production bottlenecks. FIELDS OF APPLICATION: The GANNOMAT ProTec stands out for its universal application range and high customer benefit due to its excellent cost-efficiency. It is specifically designed for maximum flexibility from batch size 1 to series production, as well as for high precision with zero setup time. The GANNOMAT ProTec is designed for complete machining of cabinet side panels, cabinet bottoms, rails, back panels, furniture doors, drawer parts, drawer fronts, countertops, frame parts, tables, sliding doors, templates, and more. Examples of operations include dowel holes, row holes, mounting plate holes, connector and drawer runner bores, fittings, cabinet hanger bores, handle bores, lock bores, etc. The grooving unit enables machining of back panel grooves (also as rebates) or grooves in drawer fronts. The milling unit can perform a variety of milling tasks such as (excerpt): pockets of all kinds, tambour tracks, spot and cable pass-throughs, handle strips, plinth cutouts, recesses for cup handles and furniture locks, lock mortises, ventilation openings in doors, kitchen worktop joints as well as partial routings in, for example, kitchen worktops, furniture frame doors, and much more. Another possible application of the ProTec is the routing of standard milling contours traditionally produced with templates and manual routers. Materials such as chipboard, solid wood, multi-layer boards, lightweight panels, etc., can be efficiently processed with the ProTec.