Stanje: rabljeno, Leto izdelave: 1977, Pressure: 250 t Column gap: 930 mm Stroke: 200 mm Distance table/ram, stroke up: 600 mm Table surface: 900 x 860 mm Blank holder force: 100 t Nljdjvuk Trepfx Agwjh Blank holder stroke: 50 mm Blank holder area: 350 x 400 mm Table height above floor: 950 mm Lateral column passage: 380 x 380 mm Ram area: 850 x 700 mm Downward speed: 400 mm/s Upward speed: 400 mm/s Working speed: 30 mm/s Oil capacity: 350 l Drive power: 45.0 kW Weight: 11.5 t Required space (W x D x H): 2.0 x 1.2 x 3.4 m Only permitted for use with safe tooling or fixed guards in accordance with German accident prevention regulations (UVV) With electro-hydraulic drive, pressure/time and stroke-dependent control, hydraulic blank holder integrated in table, mechanical ram stroke limitation with hydraulic damping No foundation pit required As is, where is, WITHOUT commissioning

Stanje: rabljeno, Leto izdelave: 1987, Presión 65 t Apertura entre columnas 930 mm Carrera 1100 mm Distancia mesa/émbolo, carrera superior 1300 mm Superficie de la mesa 1340x1084 mm Orificio pasante en la mesa 604 x 404 mm Altura de la mesa sobre el suelo 1000 mm Nledpevuk Szjfx Agwjh Paso lateral entre columnas 705 mm Superficie del émbolo 1230 x 990 mm Velocidad bajada 620 mm/s Velocidad subida 207 mm/s Velocidad de trabajo 320 mm/s Capacidad de aceite 450 l Potencia motriz 15,5 kW Peso 8,0 t Dimensiones (AnxPxAl) 2,8 x 2,6 x 4,85 m Prensa hidráulica de desbarbado de alta velocidad para piezas de fundición a presión con accionamiento oleohidráulico, deslizadores laterales hidráulicos (4x), tope hidráulico en la parte inferior / eyector en la parte superior en el émbolo, sistema de seguridad anticaída / bloqueo de émbolo Superficie de la mesa 1340 x 705 mm o 930 x 1084 mm Superficie del émbolo 1230 x 705 mm o 930 x 990 mm Placa de inserción con orificio pasante 320 x 260 mm se vende en el estado actual, SIN puesta en marcha

Stanje: rabljeno, Leto izdelave: 1987, Pressure: 80 t Throat depth: 380 mm Stroke: 8 - 112 mm Strokes per minute: 60 Distance table/ram, largest stroke up, adjustment up: 472 mm Table surface: 840 x 610 mm Table height above floor: 800 mm Njdpfx Agevuk Snjwolh Clearance between side frames: 520 mm Ram area: 650 x 400 mm Ram adjustment: 70 mm Drive motor power: 7.5 kW Weight: 6.9 t Required floor space (LxWxH): 1.1 x 2.15 x 3.2 m Approved for manual feeding operations according to German accident prevention regulations (UVV) Equipped with electric motor, pneumatic clutch/brake combination, mechanical overload protection in the ram, tie rods for improved frame rigidity, two-hand operation Sold as is, EXCLUDING commissioning, EXCLUDING control cabinet Commissioning (with new control system) available on request

Stanje: rabljeno, Leto izdelave: 1988, Tlak: 100 t Razdalja med stojali: 1180 mm Hod: 1 - 120 mm Število hodov: 90 /min Razdalja med mizo in batom (bat zgoraj): 470 mm Površina mize: 1100 x 700 mm Višina mize nad tlemi: 800 mm Stranski prehod skozi stojala: 400 mm Površina bata: 740 x 350 mm Nastavitev bata: 100 mm Pogon: 37,0 kW Teža: 11,0 t Nledpfx Agjvzxtajwjh Potrebni prostor (ŠxGxV): 2,3 x 2,0 x 3,5 m Različna hoja stiskalnice s hidravlično gnanim kolenčnim mehanizmom, nastavljivo glede na tlak in hod, dvoroočno upravljanje ni potrebna temeljna jama v obstoječem stanju, brez zagona Cena za zagon (v danem stanju) na zahtevo Izdelava T-utorjev v mizo in bat po navodilih stranke – cena na zahtevo

Stanje: rabljeno, Leto izdelave: 1969, Pressing force: 50 t Throat depth: 260 mm Stroke: 8 - 120 mm Strokes per minute: 100 Nlodjvzxr Njpfx Agweh Distance between table and ram, large stroke at top, upper adjustment: 410 mm Table surface: 650 x 500 mm Table opening: 250 x 180 mm Table height above floor: 740 - 980 mm Table adjustable: 240 mm Ram surface: 400 x 180 mm Ram adjustment: 70 mm Drive power: 2.2 kW Weight: 2.3 t Space requirements (W x D x H): 1.2 x 1.4 x 2.3 m Permitted only with safety tooling or fixed guarding according to German accident prevention regulations (UVV) Equipped with motor, wrap-spring clutch, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, adjustable table Sold as is, ex location, NOT commissioned Commissioning available on request (in current condition)

Stanje: rabljeno, Leto izdelave: 1977, Druck 050 t Ausladung 255 mm Hub 8 - 120 mm Hubzahl 115 /min Entfernung Tisch/Stößel, gr. Hub oben, Verst. oben 380 mm Tischfläche 640 x 500 mm Nsdpfxjvzxr Ao Agwolh Durchfallöffnung im Tisch 250 x 180 mm Tischhöhe über Flur 710 - 930 mm Tisch verstellbar 220 mm Stößelfläche 550 x 170 mm Stößelverstellung 70 mm Antriebsleistung 4,0 kW Gewicht 3,1 t Raumbedarf (BxTxH) 1,5 x 1,5 x 2,3 m Baujahr 1951 - umgebaut 1977 Nur zugelassen für sicheres Werkzeug oder feste Abschirmung gemäß den deutschen Unfallverhütungsvorschriften (UVV) mit Fußbedienung mit Motor, mechanischer Überlastsicherung im Stößel, manueller Hubverstellung, manueller Stößelverstellung, verstellbarem Tisch, Hand-Zentralschmierung, Fußbedienung wie steht und liegt, OHNE in Betrieb nehmen Preis für in Betrieb nehmen (in gegebenem Zustand) auf Anfrage

Stanje: rabljeno, Leto izdelave: 1998, Tlak 63 t Razdalja med stebri 1000 mm Hod 300 mm Razdalja miza/bate, največji hod zgoraj, nastavljivo zgoraj 850 mm Nlodsvzxrvjpfx Agweh Površina mize 980 x 500 mm Višina mize nad tlemi 850 mm Površina bata 130 mm Hitrost dol 400 mm/s Hitrost gor 461 mm/s Delovna hitrost 14 - 97 mm/s Pogon 15,0 kW Teža 5,0 t Dimenzije (ŠxGxV) 2,0 x 1,6 x 3,9 m Z oljno-hidravličnim pogonom, tlakom nadzorovan, mehanska globinska omejitev Temeljna jama ni potrebna Stanje kot stoji in leži, BREZ zagona

Stanje: rabljeno, Leto izdelave: 1985, Pressure: 40 t Stroke: 500 mm Throat depth: 360 mm Installation height: 1000 mm Table size: 630 x 500 mm Table height above floor: 1060 / 720 mm Ram area: 450 x 360 mm Downward speed: from 60 mm/s Upward speed: 300 mm/s Drive power: 7.5 kW Weight: 2.75 t Space requirement: approx. 1.0 x 1.8 x 3.05 m (LxWxH) Pass-through opening in table: 200 mm Approved only for use with secured tools or fixed guarding compliant with German accident prevention regulations (UVV) Equipped with oil-hydraulic drive, intermediate plate on table (height approx. 340 mm) Condition as is, without commissioning Nlsdovzxrpspfx Agwjh

Stanje: rabljeno, Leto izdelave: 1968, Pressure: 50 t Throat depth: 250 mm Stroke: 8 - 120 mm Strokes per minute: 115 Distance table/ram, max. stroke up, adjustment up: 420 mm Table surface: 645 x 510 mm Pass-through opening in table: 250 x 180 mm Table height above floor: 700 - 930 mm Table adjustable: 230 mm Ram area: 220 x 185 mm Ram adjustment: 70 mm Drive power: 3.0 kW Nledpfx Aevzxriogwsh Weight: 3.0 t Space requirements (W x D x H): 1.1 x 1.8 x 2.4 m Only approved for use with safe tools or fixed guards in accordance with German accident prevention regulations (UVV) With motor, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot operation As is, as seen, WITHOUT commissioning Price for commissioning (in given condition) on request

Stanje: rabljeno, Pressure 25 t Stroke 500 mm Throat depth 355 mm Installation height 800 mm Table dimensions 500 x 500 mm Table height above floor 700 mm Ram area 250 x 250 mm Drive power 7.5 kW Weight 2.1 t Nljdpfx Agovzxq Sjweh Space requirements approx. 1.45 x 0.9 x 2.55 m (LxWxH) Through-hole in table 180 mm permitted only for use with safe tools or fixed guard according to German Safety Regulations (UVV) with oil-hydraulic drive, upper and lower stroke limit, manual lever as is and where is, WITHOUT commissioning, in current condition

Stanje: rabljeno, Leto izdelave: 1979, Pressure 18 t Diameter 250 mm Stroke 150 mm Throat depth 210 mm Max. distance table to ram 400 mm Drive power 5.5 kW Machine weight approx. 1.1 t Space requirement approx. 1.0 x 1.0 x 1.8 m Hydraulic press with oil-hydraulic drive, pressure/time controlled As is, not commissioned Njdsvzxp Iepfx Agwjlh Price for commissioning (in current condition) on request

Stanje: rabljeno, Leto izdelave: 2009, Pressure: 40 t Stroke: 4 - 100 mm Strokes per minute: 130 Throat depth: 230 mm Installation height: 475 mm Table size: 650 x 460 mm Table opening: 205 x 165 mm Table height above floor: 710 - 950 mm Table adjustment: 240 mm Ram area: 435 x 240 mm Ram adjustment: 85 mm Drive power: 5.0 kW Weight: 2.6 t Required space approx.: 1.2 x 1.7 x 2.3 m Approved for manual loading according to CE standards With motor, hydraulic clutch/brake combination, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, motorized central lubrication, adjustable table, two-hand and foot operation Njdpevzxpnjfx Agwelh

Stanje: rabljeno, Leto izdelave: 1977, Pressure 63 t Outreach 250 mm Stroke 8 - 100 mm Nljdpfjvuk Rksx Agwjh Strokes per minute 56 / 84 Distance table/ram, max. stroke up, adjustment up 415 mm Table area 710 x 500 mm Passage opening in table 320 mm Table height above floor 800 mm Clearance between side frames 320 mm Ram surface 450 x 280 mm Ram adjustment 63 mm Drive power 4.0 kW Weight 4.1 t Space required (W x D x H) 1.35 x 2.0 x 2.6 m Year of manufacture 1964 - Movable safety guard added in 1977 Only approved for safe tool or fixed safety guard according to German accident prevention regulations (UVV) with motor with 2 stroke speeds, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, tiltable, hand central lubrication, foot operation as is, WITHOUT commissioning Price for commissioning (in current condition) on request

Stanje: rabljeno, Leto izdelave: 1985, Pressure: 100 t Column clearance: 1250 mm Stroke: 1035 mm Table surface: 890 x 1280 mm Distance table/ram, max. stroke up, adjustment up: 1035 mm Table height above floor: 630 mm Nedevuumcspfx Agwjlh Ram surface: 1000 x 1200 mm Lateral column passage: 700 mm Max. mould weight: 7 t Max. load capacity of swivel plate: 3.5 t Oil capacity: 180 l Drive power: 9.0 kW Weight: 11.0 t Space requirements (WxDxH): 2.1 x 3.8 x 3.9 m With pivoting ram, extendable table, tiltable table, ejector in table, hydraulic ram locking Press can be inspected in operation at our warehouse

Stanje: rabljeno, Nominal force: 100 t Stroke: 320 mm Strokes per minute: 35 Gap width: 360 / 250 mm Distance table/ram, max. stroke raised, adjustment raised: 500 mm Table size: 320 x 450 mm Table height above floor: 660 mm Ram surface: 250 x 280 mm Spindle diameter: 125 mm Drive power: 3.0 kW Weight: 4.5 t Space requirement (WxDxH): 2.0 x 1.6 x 3.1 m Approved only for hot forming High-speed friction spindle press with motor, friction drive Nlsdpfevuk N Tex Agwoh as is, where is, WITHOUT commissioning

Stanje: rabljeno, Tlak 5 t Iztek 150 mm Hod 40 mm Število hodov 0 - 80 /min Razdalja med mizo in batom, veliki hod zgoraj, zgornja nastavitev 260 mm Površina mize 340 x 270 mm Prehodna odprtina v mizi 45 mm Višina mize nad tlemi 780 mm Nastavljiva miza 120 mm Površina bata 60 mm Teža 0,3 t Prostorska zahteva (ŠxDxV) 0,4 x 0,8 x 1,4 m Pnevmatska kolenasta stiskalnica Dovoljeno samo za varno orodje ali fiksno zaščito v skladu z nemškimi predpisi o varnosti pri delu (UVV) s pnevmatsko gnanjem kolenastim sistemom, nastavljiva hitrost spusta, ročna nastavitev hoda, nastavljiva miza, nožno upravljanje, elektro-pnevmatska kontrola ogled možen v našem skladišču v provizorični delovni funkciji (glej video) Nodpfxevuuk Ue Agwslh

Stanje: rabljeno, Leto izdelave: 1979, Press force: 60 t Column distance: 650 mm Stroke: 220 mm Distance table/ram, max. stroke at top, adjustment at top: 410 mm Table surface: 600 x 525 mm Blankholder force in table: 5 t Blankholder stroke in table: 80 mm Table height above floor: 900 mm Lateral frame opening: 200 mm Ram surface: 560 x 490 mm Required space (WxDxH): 1.9 x 1.3 x 2.7 m Approved for manual loading operations according to German accident prevention regulations (UVV) with oil-hydraulic drive, light curtain (Sick FGS 600), hydraulic blankholder in table, two-hand and foot operation No foundation pit required Can be offered in its current condition, either as-is or ready for operation Nodevuk Nmjpfx Agwolh

Stanje: rabljeno, Leto izdelave: 2007, Tlak 315 t Razmik med stebri 1750 mm Hod 700 mm Razdalja med mizo in berilo, vel. hod zgoraj, nastavitev zgoraj 1200 mm Površina mize 1600 x 1500 mm Vlečna sila blazine v mizi 125 t Hod vlečne blazine v mizi 200 mm Površina vlečne blazine 1200 x 1400 mm Višina mize nad tlemi 750 mm Površina berila 1640 x 1500 mm Pogonska moč 55,0 + 11,0 kW Teža 29,5 t Potrebni prostor (ŠxGxV) 3,2 x 4,5 x 5,8 m Višina nad tlemi 5,1 m Nledpjvuukbofx Agweh Letnik 1983–2007 Modernizacija krmiljenja Siemens S 7 Odobreno za ročno podajanje v skladu s CE-standardom z oljno hidravličnim pogonom, hidravlično vlečno blazino v mizi, hidravličnim dušenjem rezalnega udarca Ponudbo možno izvesti brez zagona, z zagonom v obstoječem stanju ali alternativno z novo krmilno enoto Siemens S 7-1500 F.

Stanje: rabljeno, Leto izdelave: 1991, Tlak 150 t Širina između stupova 300 mm Hod 180 mm Udaljenost stol/klip, veliki hod gore, gornji položaj podešen 300 mm Površina stola 570x180 / 300x410 mm Visina stola iznad poda 875 mm Nodpsvuuiwefx Agwolh Bočni prolaz između stupova 180 mm Površina klipa 180 mm Brzina dolje 250 mm/s Brzina gore 160 mm/s Radna brzina 6 - 12 mm/s Kapacitet ulja 250 l Snaga pogona 11,0 kW Težina 2,4 t Dimenzije (ŠxDxV) 1,3 x 1,3 x 2,4 m Godina proizvodnje 1972 - Rekonstrukcija/renovacija 1991 Odobreno za ručno umetanje prema njemačkim propisima o sigurnosti na radu (UVV § 20) s elektro-hidrauličkim pogonom Nije potrebna temeljna jama Stanje kako stoji i leži, BEZ puštanja u rad Cijena puštanja u rad (u zatečenom stanju) na upit

Stanje: rabljeno, Leto izdelave: 2011, Pressure: 120 t Column gap: 430 mm Stroke: 125 mm Distance table/ram, stroke up: 400 mm Table size: 430 x 450 mm Table height above floor: 860 mm Lateral column clearance: 230 mm Ram area: 250 mm Working speed: 10 mm/s Nljdpfsvuuhtex Agweh Drive power: 11.0 kW Weight: 2.5 t Space requirement (W x D x H): 1.6 x 1.3 x 2.4 m Year of manufacture: 1974 - Overhauled in 2011 Approved for manual loading operations according to CE standard With oil-hydraulic drive, movable guard, two-hand and foot control No foundation pit required Can be inspected under power at our warehouse

Stanje: rabljeno, Leto izdelave: 1990, Tlak 100 t Nosilec 300 mm Hod 20 - 120 mm Število hodov 55 /min Razdalja miza/bat, pri največjem hodu zgoraj, nastavitev zgoraj 400 mm Nlsdpfx Agovuug Aowoh Velikost mize 800 x 560 mm Prebojna odprtina v mizi 310 x 180 mm Višina mize nad tlemi 745 mm Površina bata 520 x 245 mm Nastavitev bata 75 mm Pogonska moč 5,5 kW Teža 5,5 t Prostorske zahteve (ŠxGxV) 1,1 x 2,4 x 2,4 m Odobreno za ročno vlaganje v skladu z nemškimi predpisi o varnosti pri delu (UVV) s pomikom, gonilnim agregatom, hidravlično kombinacijo sklopka-zavora, mehansko zaščito pred preobremenitvijo v batu, ročno nastavitvijo hoda, ročno nastavitvijo bata, fiksno mizo, centralnim ročnim mazanjem, dvoročnim in nožnim upravljanjem lahko se ogleda v našem skladišču v delujočem stanju

Stanje: rabljeno, Leto izdelave: 1997, Pressure 130 t Clearance between uprights 1600 mm Stroke 8 - 140 mm Stroke rate 50 - 200 strokes/min Installation height (stroke + ram adjustment at top position) 520 mm Lateral pass-through between uprights 610 mm Table area 1600 x 880 mm Pass-through opening in table 1000 x 350 mm Table height above floor 950 mm Ram area 1600 x 880 mm Drive power 24.2 kW Machine weight approx. 28.00 t Space requirement approx. 4.3 x 2.2 x 3.8 m Ram adjustment 100 mm Approved for automatic operation according to German accident prevention regulations (UVV) with steplessly adjustable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, automatic stroke adjustment, 8-fold roller guide, electronic roll feeder (Hensel, EVX 500) with hydraulic intermediate ventilation 2025 - in progress: new control and safety electronics - Siemens S7-1500F, convenient operation via touch panel Nledpfevuugcex Agwoh Video available from seller before dismantling

Stanje: rabljeno, Leto izdelave: 1993, Tlak 100 t Nljdpfx Asvuuflegwjh Izpetje 320 mm Hod 160 mm Vgradna višina 480 mm Površina mize 630 x 550 mm Premer odprtine na mizi 200 mm Višina mize nad tlemi 860 mm Površina bata 560 x 450 mm Vsebina olja 500 l Skupna priključna moč 30,5 kW Teža stroja pribl. 6,4 t Prostorske zahteve pribl. 1,6 x 2,0 x 2,9 m Letnik 1979 – obnovljen 1993 Dovoljena za ročno vstavitev obdelovancev v skladu z nemško Uredbo o varnosti pri delu (UVV) z oljnohidravličnim pogonom, nastavljivim po tlaku/času in poti, z hidravličnim blažilcem reza, mehansko globinsko omejitvijo, dvoročnim upravljanjem. Stiskalnico lahko obratujočo preizkusite v našem skladišču – po želji je mogoča tudi ponudba z novo krmilno enoto.

Stanje: rabljeno, Leto izdelave: 1962, Tlak 025 t Iztegnitev 200 mm Hod 8 - 80 mm Število hodov 180 /min Razdalja med mizo in batom, velik hod zgoraj, nastavitev zgoraj 330 mm Površina mize 550 x 400 mm Preboj na mizi 60 mm Nedpfx Aovuudnogwjlh Višina mize nad tlemi 800 mm Prehod med stenami korpusa 200 mm Površina bata 355 x 220 mm Nastavitev bata 50 mm Pogon 2,7 kW Teža 2,5 t Prostorska zahteva (ŠxDxV) 1,2 x 1,8 x 2,4 m Uporaba dovoljena le s varnim orodjem ali fiksno zaščito v skladu z nemškimi smernicami za varstvo pri delu (UVV) s motorjem, pnevmatsko sklopko, mehanskim omejevalnikom preobremenitve v batu, ročno nastavitvijo hoda, ročno nastavitvijo bata, nagibljiv, ročno centralno mazanje, dvoročno in nožno upravljanje kot stoji in leži, BREZ zagona Cena za zagon (v danem stanju) na zahtevo

Stanje: rabljeno, Leto izdelave: 1982, Pressure: 150 t Throat depth: 520 mm Stroke: 30 - 200 mm Strokes per minute: 15 - 60 Distance between table and ram, max. stroke up, adjustment up: 650 mm Table size: 1600 x 1000 mm Table opening: 1040 x 140 mm Table height above floor: 1000 mm Clearance between machine side frames: 1000 mm Ram size: 1400 x 800 mm Ram adjustment: 120 mm Drive power: 20.0 kW Weight: 27.5 t Space requirement (W x D x H): 2.3 x 2.75 x 4.5 m Nodpfjvuudbjx Agwjlh Permitted only for operation with safety tools or fixed guards in accordance with German accident prevention regulations (UVV). Features: - Infinitely variable drive - Pneumatic clutch/brake combination (Ortlinghaus brand) - Hydraulic overload protection in the ram - Pneumatic ram weight compensation - Semi-automatic ram adjustment Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system.