Dodatki in rezervni deli za stiskalnice za kovine nakup rabljenega (61)

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država porekla: Turčija Cena: 31.620 € Leasing rata: 603,94 € Debelina pločevine – konstrukcijsko jeklo: 0,4 – 2 mm Maks. širina pločevine: 600 mm Maks. presek: 1200 mm² Premer podajalnih valjev: 80 mm Hitrost podajanja: 75 m/min Pospešek podajanja: 10 m/s² Motorni navor: 10 Nm Stožčasti čelni zobniški prenos WATTDRIVE (Izdelano v Avstriji) Pnevmatski sistem FESTO Blsdpfeynnf Njx Ag Tsd Servo pogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 gnana valja Zunanji enkoder OPCIJA: Rokov koles in Simlinx daljinski servisni modul 4.290 €

Stanje: novo, Stanje: novo Dobavni rok: približno 8 tednov po naročilu Država porekla: Turčija Cena: 31.080 € Leasing obrok: 593,63 € Debelina pločevine – konstrukcijsko jeklo: 0,4 – 3 mm Največja širina pločevine: 400 mm Največji prečni prerez: 1.200 mm² Premer podajalnih valjev: 80 mm Podajalna hitrost: 75 m/min Pospešek podajanja: 10 m/s² Motorni navor: 10 Nm Stožčato-čelni zobniški prenos WATTDRIVE (izdelan v Avstriji) Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 pogonska valja Blodpfjynnf Ajx Ag Tjd Zunanji enkoder MOŽNOST: Ročni volan in modul za daljinsko vzdrževanje Simlinx € 4.290,--

Stanje: novo, Stanje: novo Dobavni rok: cca 8 tednov od naročila Država izvora: Turčija Cena: 28.390 € Leasing rata: 542,25 € Debelina pločevine - konstrukcijsko jeklo: 0,4 - 3 mm Maks. širina pločevine: 300 mm Maks. prečni prerez: 900 mm² Premer podajalnih valjev: 80 mm Podajalna hitrost: 75 m/min Pospešek podajanja: 10 m/s² Navor motorja: 10 Nm Stožčasto-čelni zobniški prenos WATTDRIVE (Izdelano v Avstriji) Bodpfx Asynnfveg Told Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 pogonska valja Zunanji dajalnik položaja (enkoder) OPCIJA: Ročni volan in modul za daljinsko vzdrževanje Simlinx € 4.290,--

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov od naročila Država porekla: Turčija Cena: 13.760 € Leasing rata: 264,19 € Debelina pločevine - konstrukcijsko jeklo: 0,4 - 2 mm Maks. širina pločevine: 400 mm Maks. prečni prerez: 300 mm² Premer podajalnih valjev: 63 mm Bsdpfxeynncns Ag Teld Podajalna hitrost: 150 m/min Pospešek podajanja: 10 m/s² Pnevmatski sistem FESTO Servopogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 podajalna valja MOŽNOST: Ročni volan in Simlinx daljinski servisni modul: 4.290 €

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov od naročila Država izvora: Turčija Cena: 12.950 € Leasing obrok: 248,64 € Debelina pločevine - konstrukcijsko jeklo: 0,4 - 2 mm Maks. širina pločevine: 300 mm Maks. prečni prerez: 300 mm² Premer podajalnih valjev: 63 mm Podajalna hitrost: 150 m/min Blsdpfxjynnche Ag Ted Podajalno pospeševanje: 10 m/s² Pnevmatski sistem FESTO Servopogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 podajalna valja OPCIJA: Ročni volan in Simlinx modul za daljinsko vzdrževanje: 4.290 €

Stanje: novo, Stanje: novo Dobavni rok: pribl. 12 tednov od naročila Država izvora: Turčija Cena: 12.630 € Leasing obrok: 242,5 € Debelina pločevine - konstrukcijsko jeklo: 0,4 - 2 mm Največja širina pločevine: 200 mm Maks. presečna površina: 300 mm² Bledpfoynncbex Ag Tod Premer podajalnih valjev: 63 mm Hitrost podajanja: 150 m/min Pospešek podajanja: 10 m/s² Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS SIEMENS 7" barvni zaslon na dotik 2 podajalna valja MOŽNOST: Ročni volan in Simlinx daljinski servisni modul € 4.290,--

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, širina tuljave: 200 mm, največja širina izdelka: 200 mm, skupna masa: 80 kg, trajanje garancije: 12 meseci, delovna širina: 200 mm, višina izdelka (maks.): 3 mm, širina valja: 64 mm, Silicon+ SFS 200 Servo Feed Roll Unit Compatible with all types of presses and primarily used on Bruderer, Schaal, and Mabu machines. Feed length – min. 0.10 mm up to max. 9999.99 mm Feed width – max. 100 mm, 200 mm, or 300 mm depending on the required model. Material thickness – 0.20 – 3.20 mm Feed angle – 180° Press line height – ±50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC touchscreen Brushless servo motor – 0.75 kW, 1.8 kW, or 2.3 kW Feed unit weight approx. 80–150 kg Feed unit dimensions: 780 x 730 x 680 mm – The unit is powered by a brushless direct-drive servo motor, eliminating gear play and wear, with no noise, no lubrication required, and a safe, synchronized roller segment pair. – Rollers can be supplied with PU coating on request for gentle handling of delicate raw material. – Synchronization between the feeder and the stamping press is straightforward via a cam signal from the press’s PLC. – The unit can be programmed for up to 10 groups of feeding steps, saved as recipes. Feed length is steplessly adjustable during operation. EUR 1 certificate for European origin and CE compliance. Specifications are subject to change without prior notice. Upon consultation, we can manufacture feeders tailored to your requirements. Bsdpfjvptz Ijx Ag Told

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Rated load: 2,500 kN Threshold value: Measurement starts at approx. 3% of rated load (approx. 75 kN) Resolution: 10 kN Measurement accuracy: +/-0.5% of full-scale reading (FS) Non-linearity: +/-0.3% FS Non-repeatability: +/-0.1% FS Temperature range: 0°C to 70°C Temperature influence On FS output: +/-0.001% FS/°C On zero-load output: No influence (automatic zero calibration) Overload capacity: 50% of rated load (3,750 kN) Measurement speed: Three measurements per second Operating modes: Peak value or continuous measurement Strokes per minute: Single-stroke device, automatic zeroing after each stroke Bledpfjfpwmpjx Ag Tod Power supply: Standard 9V block battery Approx. 30 hours of continuous operation Device features a battery replacement indicator Dimensions: Approx. 185mm (L) x 200mm (W), height approx. 127mm Height (exact): 5.0000 +/-0.0002" Weight: Approx. 13 kg including carrying case With analog output

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Rated load: 5,000 kN Threshold: Measurement starts at approx. 3% of the rated load (approx. 150 kN) Resolution: 10 kN Measurement accuracy: +/-0.5% of full scale (FS) Non-linearity: +/-0.3% FS Non-repeatability: +/-0.1% FS Temperature range: 0°C to 70°C Temperature effects On FS output: +/-0.001% FS/°C On unloaded output: no influence (automatic zero adjustment) Overload: 50% of rated load (7,500 kN) Blsdpefpwk Rsfx Ag Tod Measurement speed: Three measurements per second Operating modes: Peak value or continuous measurement Strokes per minute: Single-stroke device, automatic zero reset with each stroke Power supply: Standard 9V block battery Approx. 30 hours continuous operation The unit features a battery change indicator Dimensions: approx. 230mm L x 190mm W, height approx. 180mm Height (exact): 7.0000 +/-0.0002" Weight: approx. 32 kg, including transport case With analog output

Stanje: dober (rabljeno), Press control unit from Brankamp, removed from a used machine due to a complete rebuild of the control system. Blsdpfx Agjbu N N Ne Tod Not tested, but was in use up to removal. May be suitable for spare parts or as a donor unit.

Stanje: rabljeno, Technical details: Piston diameter: Ø 160 mm Weight: 200 kg Dimensions: 0.6 x Ø 0.3 m Draw cushion for a WMW Erfurt press PYE 160 Blank holding force: 50 metric tons (MP) Bedpfx Agju Nurfj Tsld Ejector force: 4 metric tons (MP) Stroke: up to 160 mm Flange diameter: Ø 280 mm Piston centering bore: M16, mounting holes: M24, Ø 118 mm Hydraulic connection: 2x 1 inch internal thread (i.D.)

Stanje: rabljeno, Technical details: Mounting diameter: 310 mm Weight: 216 kg Dimensions (L x W x H): 0.5 x 0.2 x 0.9 m Connecting rod for mechanical press PEE 250 Trapezoidal thread Ø 146 x 14 mm Blodpfx Agju Nurxe Tjd

Stanje: rabljeno, T-slot plate, clamping plate with T-slots, plate field, welding table - Dimensions: 1500 x 3516 x 260 mm (H) - Plate thickness: 30 mm - Plate features: with support ribs - 1x T-slot: 17 mm - Weight: 1800 kg Bledjcbqqispfx Ag Tsd

Stanje: rabljeno, T-slot plate, clamping plate with dovetail slots, plate area, welding table -Intermediate plate: for hydraulic press or eccentric press -Dimensions: 455/365/H40 mm Bsdpfx Asb Ix Nlog Told -Bore: Ø mm -Dovetail slot: 17 mm -Weight: 45 kg

Stanje: rabljeno, T-slot plate, clamping plate with T-slots, plate field, welding table - Dimensions: 3005/818/H800 mm - Height: adjustable - Plate thickness: 35 mm Bjdocttyrspfx Ag Tsld - Plate: with support ribs - 7x dovetail grooves: slot 38/48 mm - Groove length: 1820 mm - Weight: 1100 kg

Stanje: rabljeno, Bending tool, die, bottom tool, die tool, folding tool, press tool, forming tool - Die tool: Forming tool / press tool - Profile: Ø 98 mm - Shank: Ø 40 mm Bledpfx Agjrlpn Rj Tod - Dimensions: Ø 98 x 185 mm - Weight: 7.4 kg

Stanje: rabljeno, Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool Bodpferlppksx Ag Tsld - Die tool: forming tool / press tool - Profile: Ø 76 mm - Mounting/shaft: Ø 40 mm - Dimensions: Ø 76 x 130 mm - Weight: 2.8 kg

Leto izdelave: 1977, Stanje: rabljeno, Gripper feeder for eccentric press, single-column press, automatic punching press, single-column eccentric press, eccentric press, single-column press - Manufacturer: Raster, gripper feeder from automatic punching press type HR 60 NL-4S - Stroke: mm - Dimensions: see photos - Transport dimensions: 900/640/H620 mm Bodpfxstigw Nj Ag Tsld - Weight: 200 kg

Stanje: dober (rabljeno), T-slot plate, clamping plate with T-slots, plate table, welding table - Intermediate plate for: hydraulic press, eccentric press, milling machine - Dimensions: 1100/650/H100 mm - Plate: solid - Boreholes: 8x - T-slot: 28 mm - Weight: 536 kg Bledpfx Aeb Npx Nsg Tjd

Stanje: dober (rabljeno), T-slot plate, clamping plate with holes, plate field, welding table Blodpfxjcpc Spo Ag Tsd - Dimensions: 3012/2010/H710 mm - Plate thickness: 82 mm - Plate: with support ribs - Weight: 3370 kg

Leto izdelave: 1982, Stanje: dober (rabljeno), Clamping plate with T-slots and cross table, platen field, welding table, plate drilling machine, T-slot plate, pallet changer - T-slot plate removed from a Hüller Hille milling machine, type NB-H 70 - Width: 475 mm Bsdpfx Agjfhtp Se Told - Length: 500 mm - Height: 68 mm - Plate: solid design - Slot width: 12 mm - Dimensions: 500/475/H68 mm - Weight: 90 kg

Stanje: rabljeno, Clamping plate, marking and spotting plate, measuring plate, measuring table, welding table, alignment plate - Clamping plate: length 5020 mm - Plate thicknesses: 35/20 mm - Overall dimensions: 5020 x 500 x H255 mm Bledpegw Il Defx Ag Ted - Weight: 1550 kg

Stanje: rabljeno, T-slot plate, clamping plate with T-slots, platen, welding table, spacer plate for hydraulic press, eccentric press, milling machine - Dimensions: 930 x 700 x H90 mm - Plate: solid - Center bore: Ø 100 mm - Weight: 450 kg Bodpfx Agjb Uhqie Tsld

Leto izdelave: 1982, Stanje: dober (rabljeno), Clamping plate with T-slots and cross table, plate field, welding table, plate boring mill, T-slot plate - T-slot plate: for milling machines - Width: 500 mm - Length: 500 mm - Height: 87 mm - Plate: solid construction - Slot width: 12 mm - Dimensions: see technical drawing in photo - Quantity: 21 clamping plates available Bljdpfxohubczj Ag Tsd - Price: per piece - Dimensions: 500/500/H87 mm - Weight: 91 kg per piece

Stanje: rabljeno, Bending tool, die, lower tool, forming die, flanging tool, press tool, forming tool Bedorlppvjpfx Ag Tsld -Forming die: Adapter for forming / press tool -Mounting: Ø 40 mm -Bore: Ø 20 mm -Dimensions: Ø 70 x 135 mm -Weight: 2.6 kg