Dodatki in rezervni deli za stiskalnice za kovine nakup rabljenega (55)

Stanje: rabljeno, Clamping plate, marking and spotting plate, measuring plate, measuring table, welding table, alignment plate - Clamping plate: length 5020 mm - Plate thicknesses: 35/20 mm Kedjgw Il Depfx Ah Dsdu - Overall dimensions: 5020 x 500 x H255 mm - Weight: 1550 kg

Leto izdelave: 2018, Stanje: novo, številka stroja/vozila: DF0246 Rev0, Maximum tool dimensions: 2500 x 1800 mm Load capacity: 20 t Dimensions (L x W x H): 1920 x 2818 x 1140 mm Adjustable width: 1000 – 2000 mm Height adjustable via hydraulic pump: 700 – 1200 mm Weight: 2 t Motor power: 2.2 kW Threaded rod diameter: 70 mm Maximum tool dimensions: 2500 x 1800 mm Kodpfx Asdxvfmjh Dodu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Rated load: 2,500 kN Threshold value: Measurement starts at approx. 3% of rated load (approx. 75 kN) Resolution: 10 kN Measurement accuracy: +/-0.5% of full-scale reading (FS) Non-linearity: +/-0.3% FS Kdsdpfofpwmpex Ah Dju Non-repeatability: +/-0.1% FS Temperature range: 0°C to 70°C Temperature influence On FS output: +/-0.001% FS/°C On zero-load output: No influence (automatic zero calibration) Overload capacity: 50% of rated load (3,750 kN) Measurement speed: Three measurements per second Operating modes: Peak value or continuous measurement Strokes per minute: Single-stroke device, automatic zeroing after each stroke Power supply: Standard 9V block battery Approx. 30 hours of continuous operation Device features a battery replacement indicator Dimensions: Approx. 185mm (L) x 200mm (W), height approx. 127mm Height (exact): 5.0000 +/-0.0002" Weight: Approx. 13 kg including carrying case With analog output

Stanje: rabljeno, T-slot plate, clamping plate with T-slots, platen, welding table, spacer plate for hydraulic press, eccentric press, milling machine - Dimensions: 930 x 700 x H90 mm - Plate: solid - Center bore: Ø 100 mm - Weight: 450 kg Kdedob Uhqiopfx Ah Deu

Stanje: rabljeno, Bending tool, die, lower tool, forming die, flanging tool, press tool, forming tool -Forming die: Adapter for forming / press tool -Mounting: Ø 40 mm -Bore: Ø 20 mm -Dimensions: Ø 70 x 135 mm -Weight: 2.6 kg Kedjrlppvjpfx Ah Dedu

Stanje: rabljeno, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp pressing tool, upper tool - Die tool: Forming tool / press tool - Shank: Ø 40 mm - Pressure surface: 125 x 15 mm, see technical drawing photo - Overall dimensions: 125/50/H163 mm Kdjdpfx Ahshb Uhme Dju - Weight: 4.3 kg

Stanje: rabljeno, T-slot plate, clamping plate with T-slots, plate field, welding table, welding bench -Dimensions: 1500/3510/H950 mm -Plate thickness: 20 mm -Plate: with support ribs -1x T-slot: 18 mm -with: removable stop -Weight: 2600 kg Kodpfx Ahocbtwdj Djdu

Stanje: rabljeno, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool Kedpfx Ahshb Uhfs Dodu - Die Tool: Forming tool / two-piece press tool - Pressure profile: Ø 70 x 140 mm, 15 mm projection - Side part: detachable - Mounting: Ø 40 mm - Overall dimensions: 250/70/H298 mm - Weight: 21 kg

Stanje: rabljeno, Bending tool, die, bottom tool, die tool, folding tool, press tool, forming tool, clamp pressing tool - Die tool: Forming / pressing tool for steel clamps Ø 270 mm - Tool profile: Internal Ø approx. 280 mm - Lower part dimensions: 540/230/H315 mm / Weight 149 kg - Upper part dimensions: 380/210/H280 mm / Weight 83 kg / Mount Ø 39 mm / Radius 140 mm - Transport dimensions: 540/455/H230 mm - Total weight: 232 kg Ksdpfjhbwc Rox Ah Dedu

Stanje: rabljeno, Bending tool, die, lower tool, forming die, hemming tool, press tool, forming tool, clamp pressing tool, upper tool -Forming die: forming tool / press tool, 2-piece Kodpfx Ajhbzvqeh Djdu -Lower part: removable -Mounting: Ø 40 mm -Overall dimensions: 260/90/H175 mm -Total weight: 18.1 kg

Stanje: rabljeno, Hydraulic Clamping Bush, ETP Clamping Bush - Type: ETP-EXPRESS R-25 - Flange: Ø 58 mm - Flange width: 14 mm - Shaft: Ø 30 mm Kjdpfx Asdki N Uoh Djdu - Shaft length: 35 mm - Bore: 25 mm - Dimensions: Ø 58/H49 mm - Quantity: 4 units available - Price: per piece - Weight: 0.27 kg/unit

Stanje: rabljeno, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool Kdedpfx Aeg D Rmmoh Deu - Die tool: forming tool / press tool - Profile: Ø 45 mm - Dimensions: 535/195/H140 mm - Weight: 35 kg

Stanje: rabljeno, clamping plate, clamping table, clamping cube, press table Kdodpfsu N Sinjx Ah Dsu - Clamping table: Clamping plate for hydraulic press or eccentric press - Clamping surface: 365 x 305 mm - Dimensions: see photo/technical drawing - Overall dimensions: 365/305/H150 mm - Weight: 57 kg

Stanje: rabljeno, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool - Die tool: forming tool / press tool clamp press tool Kedporlppyjfx Ah Dodu - Mounting: Ø 40 mm - Profile: radius 20 mm - Dimensions: 140/46/H120 mm - Weight: 2.2 kg

Stanje: rabljeno, Clamping plate, clamping table, clamping cube, press table - Clamping table: Clamping plate for hydraulic press, eccentric press Kedpfx Aheu N Siuj Dedu - Clamping surface: 500 x 280 mm - Dimensions: see technical drawing/photo - External dimensions: 500/280/H180 mm - Weight: 53 kg

Stanje: rabljeno, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool - Die tool: Two-piece forming tool / press tool - Profile: 90° angle - Mounting: Ø 40 mm - Dimensions: 160/140/H345 mm - Weight: 40.1 kg Ksdpfx Ahsrlppne Dodu

Stanje: rabljeno, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool Kdedpfx Aherlpprs Dsu - Die tool: forming tool / press tool adapter MST Ø 85 - Mount: Ø 40 mm - Mounting thread: M34 - Dimensions: Ø 85 x 160 mm - Weight: 4.5 kg

Stanje: dober (rabljeno), Pressing tool, sheet metal former, forming tool, bending tool, press brake tool, bending die, die, die block - Press brake tool: bottom tool for press brake / press, 5 pieces - Lengths: 2 x 300 mm / 1 each of 275 / 200 / 175 mm Ksdpfxjv Szbhe Ah Dedu - Groove width: 58 / 52 mm - Angle: 90° - Dimensions: see photos / technical drawing - Price/offer: complete set - Transport dimensions: 450 / 300 / H115 mm - Weight: 48.3 kg

Stanje: dober (rabljeno), T-slot plate, clamping plate with T-slots, plate table, welding table - Intermediate plate for: hydraulic press, eccentric press, milling machine - Dimensions: 1100/650/H100 mm - Plate: solid Kdjdsb Npx Nspfx Ah Dju - Boreholes: 8x - T-slot: 28 mm - Weight: 536 kg

Stanje: dober (rabljeno), T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table Kdsdpfx Aocbqqxjh Dsu - Dimensions: 250/1450/H170 mm - Plate thickness: 28 mm - Plate features: with support ribs - 1x T-slot: 12 mm - 1x longitudinal slot - Weight: 156 kg

Stanje: dober (rabljeno), T-slot plate, inspection plate, measuring table, clamping plate with T-slots, platen field, welding table, welding bench - Dimensions: 620 x 1560 x H260 mm - Plate thickness: 20 mm - Plate with support ribs - 1x T-slot: 15 mm Kdsdpfxjcbqqke Ah Dou - Weight: 360 kg

Leto izdelave: 1982, Stanje: dober (rabljeno), Clamping plate with T-slots and cross table, platen field, welding table, plate boring mill, T-slot plate, pallet changer Kdsdpfjfkt Iisx Ah Dju - T-slot plate - Width: 300 mm - Length: 420 mm - Height: 70 mm - Slot width: 14 mm - Weight: 52 kg

Leto izdelave: 1982, Stanje: dober (rabljeno), Clamping plate with T-slots and cross table, platen field, welding table, plate drilling machine, T-slot plate, pallet changer - T-slot plate removed from a Hüller Hille milling machine, type NB-H 70 - Width: 475 mm - Length: 500 mm - Height: 68 mm - Plate: solid design - Slot width: 12 mm - Dimensions: 500/475/H68 mm - Weight: 90 kg Kdjdpfefhtp Sex Ah Dsu

Leto izdelave: 1982, Stanje: dober (rabljeno), Clamping plate with T-slots and cross table, plate field, welding table, plate boring mill, T-slot plate - T-slot plate: for milling machines - Width: 500 mm - Length: 500 mm - Height: 87 mm - Plate: solid construction - Slot width: 12 mm - Dimensions: see technical drawing in photo - Quantity: 21 clamping plates available - Price: per piece Kjdpfjhubczsx Ah Dodu - Dimensions: 500/500/H87 mm - Weight: 91 kg per piece

Stanje: dober (rabljeno), T-slot plate, clamping plate with dovetail grooves, plate field, welding table, welding table - Intermediate plate: for hydraulic press, eccentric press - Opening: 150 x 100 mm - Slot width: 18 mm - Hole spacing: 200 x 250 mm, Ø 14 mm Kodpfx Ahemydncs Dsdu - Dimensions: 480/350/H60 mm - Weight: 66 kg