Vpenjalna plošča s T režo

MASSI 250/1450/H170 mm

Stanje: rabljeno, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel distances: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel rotary table: 400 x 290 mm, centering bore 30H6 Table load capacity: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input increment: 0.01 mm Total power requirement: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Retaining bolts: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Electrical connection: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 Hedpfx Asvt D D Ujb Esfd - 3 axes controlled (X, Y, and Z axes) - Manual swivel rotary table, C-axis = table rotation 360°, B-axis = swivel range +105° / -15° - Direct position measurement system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 transmission stages - Fully enclosed safety cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Space requirements L x W x H 2000 x 2000 x 2100 mm Weight 1750 kg Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Universal Milling Machine Manufacturer: KUNZMANN Model: WF 650 Year of manufacture: 2007 Technical Data Manufacturer: Kunzmann Model: WF 650 Year: 2007 X-axis travel: 650 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Clamping surface: 1000 x 600 mm Spindle taper: SK 40 Spindle speeds: 5 - 6500 rpm Quill stroke: 60 mm Hfsdpfx Aewhm S Nob Eed Swiveling vertical head: +/- 90° Table load: max. 400 kg Feeds (longitudinal/cross/vertical): 0 - 4000 mm/min Rapid traverse: 25 / 25 / 20 m/min Distance table / vertical milling spindle: 100 / 550 mm Distance table / horizontal spindle: 270 / 720 mm Number of tool magazine stations: 20 Tool diameter: 95 mm Tool diameter with 2 free spaces: 135 mm Tool length: max. 300 mm Tool weight: max. 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions (L x W x H): 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 CNC control - Operating manual - Full enclosure - Vertical head with extendable quill - Hydraulic tool clamping - Fixed table - Electronic hand pendant - Coolant system - Chip conveyor All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, dolžina podajanja os X: 650 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 475 mm, hitrost pomika os X: 6.000 m/min, hitrost podajanja osi Y: 6.000 m/min, hitrost podajanja os Z: 6.000 m/min, širina mize: 450 mm, dolžina mize: 1.530 mm, X-os: 650 mm Y-os: 500 mm Z-os: 475 mm Dolžina mize: 1530 mm Širina mize: 450 mm Nosilnost mize: 350 Hitrost vretena: 55 - 4000 obr/min Pomik po X-osi: 6000 mm/min Pomik po Y-osi: 6000 mm/min Pomik po Z-osi: 3000 mm/min Dolžina: 2300 mm Širina: 2550 mm Višina: 2200 mm Teža: 2850 kg Hfodpfxsxtmqtj Ab Eod Prosimo, upoštevajte: Podatki na tej strani so bili po najboljših močeh pridobljeni od nas in, kjer je bilo mogoče, od proizvajalca. Podatki so navedeni v dobri veri, vendar točnosti ni mogoče zagotoviti. Zato ne predstavljajo uradne ponudbe ali pogodbenih pogojev. Priporočamo, da preverite vse bistvene podrobnosti.

Stanje: rabljeno, Leto izdelave: 2018, Obratovalne ure: 600 h Hfedpfxjxu I Txj Ab Ejd Tehnični podatki: Pomik po osi X/Y/Z: 450 / 350 / 400 mm Razdalja med čelom vretena in mizo: 230 - 630 mm (vodoravno rezkalno vreteno) Hitri pomik X/Y/Z: 5000 / 5000 / 5000 mm/min Delovni pomik X/Y/Z: 10 - 2000 mm/min brezstopenjsko Maks. podajalna sila v X/Y/Z: 10 / 10 / 15 kN Vpenjalna površina: 800 x 400 mm (fiksna kotna miza) Maksimalna obremenitev mize: 30 kg (fiksna kotna miza) Vertikalna rezkalna glava: Območje vrtljajev: 10 - 5000 1/min Moč: 10 kW Dimenzije (DxŠxV), pribl.: 1980 x 2030 x 1990 mm Teža, pribl.: 2270 kg Oprema: - Zasukljiv upravljalni pult - Digitalni prikaz na osnovi Sinumerik 828D - Desnosmerni/levosmerni tek glavnega vretena - Linearna vodila - Rezkalno vreteno z radialno/aksialnim štirikratnim ležajem - Glavni motor z zavoro vretena - CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF4/3 Universal Tool Milling Machine with Heidenhain TNC 320 CNC Control, Excellent Condition, CE-Compliant from Training Workshop! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable speed up to 4500 rpm >> Infinitely variable feed in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axes: 5000 mm/min Z axis: 4000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm Hedpfjxupc Ujx Ab Eofd >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements: approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 CNC control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very easy by tilting away the vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been both mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location. There are 7 pieces of Kunzmann WF4/3 milling machines with Heidenhain TNC 320 controls available. The machines are immediately available.