Podajalnik

HESSE by COILTECH PRO 80 - 300 / Schneider

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 06 61 218, Ref. No.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine No.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Inner coil diameter: approx. 450 to 520 mm Outer coil diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gear motor. Expansion of carrying segments manually via hand crank and joints Number of carrying segments: 3 Coil lateral guidance achieved by robust, lockable boundary arms. Decoiler stand constructed in heavy-duty box design, fabricated as welded assembly. Additional Equipment: Hnjdpeg U Utvsfx Af Teg Shutdown for "loop too small" via antenna switch, mounted on the column of the base housing of the loop control. Height infinitely adjustable. Strip side guide on the base housing of the loop control, via lateral guide rods. Pass-through width infinitely adjustable.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Drive: Servo motor Maximum strip width: 300 mm Hjdpfjr H Dwisx Af Tsng Strip thickness: 0.5 – 4.0 mm Maximum cross section: 1,200 mm² Feed length: 0 - 9,999.9 mm Accuracy: +/- 0.05 mm Roller diameter: 80 mm The feed rollers are hardened and ground. Raising the upper roller for strip insertion is performed via pneumatic cylinder and valve. The contact pressure of the upper roller is applied pneumatically via short-stroke cylinders. The upper roller is mounted torsion-resistant, thus preventing unilateral roller pressure. Off-center strip transport is permitted. An entry roller guide, an adjustable strip side guide, and strip end detection on the entry side are included as standard. Protective covers on feed rollers and drive components. Intermediate venting is switchable on and off.

Stanje: rabljeno, Leto izdelave: 1984, Material width: 350 mm Coil weight: 1 t Material thickness: 0.5 - 6 mm Coil inner diameter: 380 - 540 mm Coil outer diameter: 1500 mm Number of straightening rollers: 9 Straightening roller diameter: 30 mm Number of feed rollers: 2 Straightening machine weight: 2 t Space requirement for straightening machine (W x D x H): 2.0 x 2.0 x 1.9 m Decoiler weight: 1.3 t Hnedpfx Afst Hmk To Tjg Space requirement for decoiler (W x D x H): 1.7 x 1.5 x 1.6 m

Stanje: rabljeno, Coil weight: 2 x 0.15 t Clamping range: 265 - 485 mm Strip width: 200 mm Strip thickness: 0.1 - 4 mm Total power requirement: 0.25 kW Machine weight: approx. 180 kg Space requirement: approx. 1.2 x 0.9 x 1.2 m Hnsdpfx Afocdrmij Tjg - motorised double decoiler - newly painted

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1971, Load capacity: max. 250 kg Hjdedx Rzmopfx Af Tong Coil diameter: max. 650 mm Strip width: max. 100 mm

Stanje: rabljeno, Leto izdelave: 1995, Širina materiala 300 mm Teža koluta 1,25 t Debelina materiala 0,4 - 3,5 mm Notranji premer koluta 320 - 420 mm Zunanji premer koluta 1300 mm Prerez materiala 750 mm² Število ravnalnih valjev 11 Premer ravnalnih valjev 60 mm Število dovajalnih valjev 4 Premer valjev 60 mm Hitrost 5 - 30 m/min Pogonska moč 5,0 kW Teža 1,4 t Prostorske zahteve (ŠxGxV) 3,3 x 1,85 x 1,7 m Ravnalni stroj (Tip 1675-B11-FQ) s stalno nastavljivim pogonom, pogon ravnalnih valjev, ročna posamezna nastavitev okvirja valjev, centralna nastavitev širine traku, izhodna košara za valje Enojni odvijalnik (Tip 2350 B-FPS) nepogonjen, z zračno zavornico za nadtek, hidravličnim centralnim raztezanjem, zračno pritrdilno napravo Hsdpfewc U Izsx Af Tsng Krmiljenje zanke traku preko senzorja

Stanje: rabljeno, Leto izdelave: 1995, Material width: 400 mm Coil weight: 2 x 2.0 t Material thickness: 0.4 - 3.0 mm Coil inner diameter: 460 - 530 mm Coil outer diameter: 1500 mm Material cross-section: 1200 mm² Number of straightening rollers: 9 Straightening roller diameter: 30 mm Hnjdpov Svaxjfx Af Tog Speed: 0 - 40 m/min Drive power: 15.0 kW Weight: 5.2 t Required space (W x D x H): 2.15 x 4.5 x 2.85 m - Straightening machine Type KRE 30.400/9 with stepless adjustable drive, motorized roller gap adjustment, quick clamping device - Double decoiler Type 2000.2 H with pneumatic overrun brake, hydraulic expansion, hydraulic hold-down device - Loop control via ultrasonic

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Decoiler-straightener combination Strip width: 360 mm Strip thickness: 0.6 - 3.5 mm Cross-section: 900 mm² at 400 N/mm² - Straightening rollers: 7 - Individually adjustable rollers - Infinitely variable speed control via frequency inverter - 2 pneumatic pinch rollers Decoiler: - Coil weight: 2,000 kg Hedotq Sgnjpfx Af Tjng - Manual expansion - Pneumatic pressing arm - Common machine base

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Kohler straightening machine 30-400 – year of manufacture 1980 Number of straightening rollers: 9 units Max. strip width: 400 mm Hodpov Hrltofx Af Tong GSW decoiler AHM 1500 – year of manufacture 1999 Both units mounted together on a base frame Further data and images available on request

Stanje: rabljeno, Leto izdelave: 1996, Material width: 500 mm Coil weight: 2.5 t Material thickness: 0.2 - 3.0 mm Coil inner diameter: 480 - 530 mm Coil outer diameter: 1300 mm Material cross-section: 1000 mm² Hnsdpfx Afsvut Rae Tsg Number of straightening rollers: 10 Roller diameter: 80 mm Number of feeder rollers: 2 Feeder roller diameter: 120 mm Speed: 20 m/min Drive power: 4.0 + 1.1 kW Straightening machine weight: 2.3 t Straightening machine dimensions (W x D x H): 1.4 x 2.2 x 2.0 m Decoiler weight: 0.95 t Decoiler dimensions (W x D x H): 1.5 x 1.5 x 1.95 m Straightening machine type: BRMS 4/500/10, with infinitely adjustable drive Decoiler type: BSH 3-500, with main motor with constant speed, disengageable auxiliary drive, pneumatic pressing device Loop control: light barrier Can be offered as-is, either commissioned or uncommissioned Video prior to dismantling available from seller