Leto izdelave: 2000, stanje: rabljeno, 2000 M.A.C. SN-OL 1230x650-10T Preša za upogibanje lesa Delovne dimenzije: 1230 x 650 mm Tlačna moč: 10 ton Moč motorja: 5,5 kW Nodoychqhspfx Advskw

Stanje: dober (rabljeno), For sale: pneumatic press. Nedjun U Uijpfx Advekw

Stanje: rabljeno, skupna širina: 1.300 mm, skupna dolžina: 2.600 mm, skupna višina: 2.000 mm, skupna masa: 2.800 kg, stiskalna sila: 65 t, širina odpiranja: 300 mm, premer cilindra: 80 mm, transportna širina: 1.300 mm, potrebna širina: 1.300 mm, zahteva za prostor dolžina: 2.600 mm, transportna višina: 2.000 mm, transportna dolžina: 2.600 mm, potrebna višina: 2.000 mm, lastna masa: 2.800 kg, širina plošče: 1.100 mm, širina mize: 1.100 mm, dolžina mize: 2.200 mm, Furnierpresse Ott JU 60 Nedpfx Asyfw D Ajdvekw Polovna Grejne ploče 2200 x 1100 mm (dužina x širina) Ploče zlatno eloksirane, u veoma dobrom stanju Grejanje električno, 2 x 6 kW 4 hidraulična cilindra, prečnik svakog po 80 mm Ukupan pritisak prese: 65 tona Specifični pritisak prese pri punom opterećenju: 2,7 kg/cm2 Širina otvora: 300 mm Taster komanda za zatvaranje – otvaranje – stop Sigurnosni kabal za hitno zaustavljanje duž cele prese Transportne dimenzije cca. 2600 x 1300 x 2000 mm (dužina x širina x visina) Težina cca. 2800 kg Radi izbegavanja mogućih nesporazuma, preporučuje se i moguć je pregled mašine na licu mesta uz prethodnu najavu Prodaja u viđenom stanju Tehničke specifikacije, opis stanja, godina proizvodnje i obim isporuke prema prospektu proizvođača ili prethodnog vlasnika, bez garancije Zadržavamo pravo međuprodaje Za polovne mašine isključuje se svaka garancija, važi: "kupljeno u viđenom stanju" Uslovi plaćanja: cene su bez PDV-a, plaćanje pre preuzimanja ili slanja Uslovi isporuke: franko skladište

Stanje: rabljeno, Leto izdelave: 2004, Pnevmatska tiskalnica za tapetništvo, znamka Camam, leto 2004 (CE), rabljena Mere in teža: 90 x 60 x V 200 cm. Teža 200 kg (1 kos) Nkodpfx Aoyccuhjdvsw

Stanje: potreben popravila (rabljeno), Leto izdelave: 1996, *Zelo dobra ponudba, popolna za domače mojstre* Stiskalnica za brikete za lesne sekance ipd. Okrogli briketi. Prodajamo po nizki ceni, saj stroj trenutno ni v delovanju. Do nedavnega je bil v uporabi. Nkodpeyuyhvjfx Advsw Stroj izdelan v Italiji. Dostava po celotni EU.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling a carcass press for furniture assembly, RAMARCH PN31. Year of manufacture: 1998. Material size: 2500 x 1300 x 600 mm Electropneumatic operation. Manufacturer: RAMARCH, Spain (now DYNMA). Nedpoh Iahgofx Advokw Very good condition. Available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, I am selling a carcass press for furniture assembly, RAMARCH PN31. Year of manufacture: 2002. Material size: 2500 x 1300 x 600 mm Electropneumatic operation. Nkedpfxoh Iahce Advew Manufacturer: RAMARCH, Spain (now DYNMA). Very good condition. Available immediately.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Linija za pelete in naprava za pakiranje – možnost ogleda - Skladiščni silos za surovine 4 m³ z izpustom v sekljalnik, primeren za lesne sekance velikosti manj ali enako G30 + transportni trak - Sekljalnik 22,5 kW z zvočno izoliranim kabinom - Skladiščni silos 4 m³ z izhodnim transportnim trakom LP-serije - Peletirka LP22 (integrirano centralno mazanje, vodna črpalka in nadzor temperature zagotavljajo najvišjo raven uporabniku prijaznega delovanja) - Sito z transportnim trakom za LP22 (vključno s senzorjem nivoja za BigBag z vrtljivo nosilno konzolo in senzorskim kablom za priklop na peletirko LP22) - Nosilec za BigBag Vario 1,5 m³ - Pakirna naprava, primerna za sistem Vario BigBag Nkodpfxow Hrg Ns Advew Za več informacij nas prosimo kontaktirajte.

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Njdpfx Aegl Nlmjdvekw Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 0x0x0 mm Teža 0 kg Skupna potrebna moč 3 kW Stiskalnica za lepljenje blokov BLP 3000-300 - Delovna površina: dolžina 3000 mm, višina 1000 mm - Debelina lepljenja 150–300 mm Nkjdpfx Aovz Ev Iedvsw - Število tlačnih cilindrov: 6 - Tip cilindra: Ø 100 x 120 mm - Neprekinjena tlačna plošča 3000 mm - Največja sila na tlačni valj: 136 kN - Specifični pritisk pri 300 mm: 7,5 kg/cm² - Največji pritisk: 160 bar - Moč hidravlične črpalke: 3,0 kW - Pretok črpalke: 10 l/min

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 0x0x0 mm Teža 0 kg Skupna potrebna moč 3 kW Stiskalnica za lepljenje blokov BLP 3000-300-6 - Delovna površina: dolžina 3000 mm, višina 1000 mm - Debelina lepljenja 150 – 300 mm - Število tlačnih valjev 6 - Tip valja Ø 100 x 120 mm - S 6 pritrdilnimi ploščami na valj - Največja sila na tlačni valj 136 kN - Specifičen tlak pri 300 mm 7,5 kg/cm² - Največji tlak 160 bar - Moč hidravlične črpalke 3,0 kW - Pretok črpalke 10 l/min - Ročno upravljanje hidravličnega ventila Nkodpfevz Etgjx Advsw

Stanje: novo, Bernardo lisovací stoj HVS 3000 Nedoxrnu Depfx Advjkw Univerzální použití, snadná a rychlá obsluha jsou charakteristické pro lisovací stoj HVS 3000, který je proto nepostradatelný pro každodenní použití v řemeslných dílnách a truhlárnách. Technická specifikace Pracovní délka: 2800 mm Pracovní výška: 1460 mm Zdvih válce: 65 mm Lisovací síla: 2500 kg Rozteč otvorů vertikálně: 50 mm Celková délka: 3000 mm Celková výška: 2070 mm Hloubka rámu: 925 mm Hmotnost: cca 198 kg Vlastnosti • Pro různé úkoly, jako např. lepení masivního dřeva, výroba dveří, lepení hran apod. • Robustní lis s pevnou ocelovou konstrukcí • Rychlejší a efektivnější lepení ve srovnání se šroubovými svěrkami • Standardně se dodává se 4 nastavitelnými lisovacími nosníky a lisovací konzolou • Bez zaklínění lisovacích válců díky dvojitému pružinovému vedení Dodávka obsahuje • 4 posuvné lisovací nosníky, každý s vertikálním ručním hydraulickým válcem a protikusem • 1 posuvnou a nastavitelnou lisovací konzolu

Stanje: novo, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether for furniture or door production, edge or frame gluing, the high pressing force of 2,000 kg per cylinder and precise angle pressing of large-format parts allow all tasks to be accomplished with ease. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Horizontal hole pitch: 160 mm Total length: 3,250 mm Total height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Nkedpfxoxrnvbe Advsw Features • Versatile use, e.g., for frame, window, and door production • Sturdy frame press with solid steel construction • Central hydraulic cylinder control, including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders serially equipped with rocker plates Scope of delivery • 4 movable pressure beams, each with a vertical hydraulic cylinder and counter bracket • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Nkedsd Nm Sispfx Advow Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Nkodpjxfwdefx Advew Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, KATALOGŠKA ŠTEVILKA 7852 Tehnični podatki: - pritisna sila: hidravlična - oblika briketa: okrogla - premer briketa: 60 mm - premer rezervoarja: 1000 mm - zmogljivost: cca 110 kg/h - samodejno delovanje stroja - hladilnik olja - motor: 7,5 kW - dimenzije (d/š/v): 1800x1100x1500 mm - teža: 730 kg PREDNOSTI – ni prebarvan Njdsx Hhzvspfx Advekw – italijanska proizvodnja – rabljena briketirka – originalna dokumentacija DTR + CE – odlično stanje, leto izdelave 2021 Neto cena: 46.900 PLN Neto cena: 11.170 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (v primeru večjih tečajnih nihanj se cena lahko spremeni)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO Nodpfx Adjd Nnwlevjkw - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Nkedpfx Adefci D Aovsw Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, working width 3000 mm working height 2500 mm year of manufacture 1997 motor power 7.5 kW weight 2500 kg power supply 400 V Nedpfx Adeyk Snyevjkw top pressure beam side cylinders and gear mechanisms adjustable from control panel time settings for closing individual sections emergency stop switch - pull cord CE marking

Stanje: rabljeno, Silos za material 4 m³ Ventilator 11 & 4 kW Kapaciteta cca 6 briket/min Briketirna linija sestavljena iz: · Filtrirni stolp Spänex s celičnim rotacijskim ventilom · 2 x odsesovalna ventilatorja · Briketirni stroj Spänex SHB 250 K1 Filtrirni stolp sesa material neposredno iz proizvodnje, kjer ga preko rotacijskega ventila in dodatnega ventilatorja naprej dovaja v silos za material pri briketirnem stroju. Nodpfoxp Izrex Advskw Na voljo po dogovoru od marca 2026 dalje. Prodaja stroja je pogojena s prodajo skobeljnega stroja: Ref. št. 100102 ali celotne skobeljne linije: Ref. št. 100101.

Stanje: dober (rabljeno), Leto izdelave: 2007, GRIGGIO Model TYP NPC/A 30/19 AF-BO S.N. B3720207 Njdoyk Dnfepfx Advokw Pretočna stiskalnica za lepljenje naravnega furnirja, laminata ipd. Širina delovnega polja: 1830 mm Maksimalna dolžina: 3010 mm Cena vključuje lepilne valje Osama S4 R/P-2000.

Stanje: rabljeno, Leto izdelave: 1995, Technical details: Punching force: 25 t (250 kN) Passage width: 1800 mm (1660 mm usable) Nksdpfx Aeu Szfuodvow Clear span between uprights (max./min.): 155 / 25 mm Stroke: Punching stroke: 130 mm Total power requirement: 5.0 kW Machine weight approx.: 2.0 t Dimensions LxWxH: 2.3 x 1.0 x 2.2 m Hydraulic trolley beam punch Hydraulic pressure: 250 bar Punch table area: 1830 x 500 mm Punch carriage/plate: 500 x 500 mm; travel speed: 800 mm/sec; punching stroke: 63 mm/s, feed/return: 125/125 mm/sec. Operation via control panel and pushbutton/control lever Equipment: 2x feed rollers, Ø 120 x 1630 mm, pneumatic in/out

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, moč: 315 kW (428,28 KM), CPM peletirni stroj za izdelavo 6 mm lesnih peletov; zmogljivost cca. 4-5 ton/uro; vključuje valje in 1 matrico; vključno s CPM pretočnim mešalnikom tip LL 7,5 kW. Stroj je originalno zapakiran in skladiščen v suhi skladiščni hali. Ogled je možen kadarkoli. Slika je simbolična; Nkjdpfx Asyaavkjdvjw

Stanje: dober (rabljeno), Koda: 0283 Znamka: ITALPRESSE Model: 25/13 Nkjdpfeyazdiox Advsw Izdelana grelna plošča za diatermično oljno stiskalnico Tehnični podatki: Dimenzije plošče: 2500 x 1300 mm Najvišja temperatura: do 120°C Največji delovni tlak: 3/5 kg/cm2 Tlak grelnega medija: 0,5 ate Sestava: aluminij – ravna kalibrirana jeklena plošča – cevna tuljava za kroženje tekočine – ojačitvene cevi – ravna kalibrirana jeklena plošča – izolacijski material

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Lamelnalis 13 m x 1,6 m x 240 z 2 nadstropji Nksdpfoxmvvljx Advow