Stiskalnica za lepilo

Kallesoe LV5019

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), Please contact me for further information. Ledjk Nn Ilopfx Af Ajrw

Stanje: novo,

Stanje: skoraj kot novo (rabljeno), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic variable feed, infinitely adjustable 12 – 120 m/min • Feed motor: 22.0 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors equipped with electronic brakes • COMPLETE NEW CUTTERHEAD SPINDLES • Spindle diameter ø 50 mm • Spindle speed 6,000 rpm • 6 driven table rollers – hard-chromed • Spindles 1, 6, 7, 8, 9 fitted with NEW counter-bearings • Hydraulic counter-bearing clamping • Spindles 2, 3, 8, 9 with jointer • Spindles 4, 6 with pneumatic pressure mechanism • NEW feed rollers D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty pneumatic top pressure rollers • Heavy-duty pneumatic side pressure rollers • Automatic table lubrication – NEW • Centralized lubrication points • NEW free-standing control panel, 5 m cable • NEW free-standing control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram + Many NEW spare and accessory parts included. Dimensions: • Total length approx. 6,150 mm • Total width approx. 2,160 mm • Machine weight approx. 9,500 kg Electrical connection: Lrjdotynpxspfx Af Asw • Total connected load approx. 157 kW Condition: Machine as seen in the photos – technically as new Payment: Strictly net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers & inquiries only with full company details Subject to prior sale and errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK-K-24001, 1 Optimisation cross-cut line with scanner Make: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item No.: SK-K-24001 DIMTER cross-cut saw line Lrsdpswya Sysfx Af Aew comprising: - 1 x OptiCut 450 - Infeed system F 100 - LuxScan CombiScan+ C 200 with curvature measurement The machine was in operation until 2024, has been professionally dismantled, and can be inspected in this condition.

Stanje: rabljeno, Leto izdelave: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Crosscut Saw Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: Infeed lengths min./max. 3,000 – 5,000 mm Infeed widths min./max. 80 – 200 mm Infeed thicknesses min./max. 38 – 80 mm Max. wood cross-section: 200 x 50 mm End product length min./max. 700 – 1000 mm Average number of cuts per board: 5 Wood types: softwood or hardwood Performance data: Feed speed max. 180 m/min, infinitely variable Time per crosscut incl. braking: 0.7 – 1.2 s Component overview: Pos. 1: Infeed conveyor belt in front of the saw Length 1.5 m, linked to the saw’s feed motor Pos. 2: Automatic crosscut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and built-in waste extraction unit Graphical input terminal, 1/4 VGA display, with numeric keypad and function keys, including OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor/sorting station with drive unit, without ejector Belt length approx. 1.5 m The machine is already dismantled and in storage. The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The conveyor table is included, only the rubber belt is missing. Sale on behalf of client, ex location Austria, without transport and assembly Subject to errors in description and price Optional transport and loading by us possible To avoid misunderstandings, an on-site inspection by appointment is possible and recommended Sale in as-is condition Lsdpsu Atmuefx Af Aerw Technical data, condition description, year of manufacture and scope of supply according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale No warranty given for used machines; the sale is governed by “purchased as seen” Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Leto izdelave: 1999, Stanje: rabljeno, The DSG 200 vertical sawmill is the ideal choice for woodworking shops specializing in furniture and wooden flooring production, offering high efficiency and reliable performance in daily operations. The used Wintersteiger mini band saw for wood is a very good investment—its major advantage over standard machines of this type is its compact footprint, while still excelling in material processing. It is designed for splitting individual elements and sizing them to the required dimensions. Operation of this machine is not particularly complicated and can be mastered quickly. The main advantage of our sawmill is its comprehensive equipment, most notably the saw blade lubrication system, controlled from the panel, which enables precise cutting of wet material. It features independent upper roller height adjustment for quicker cutting height changes. A pneumatic feed pusher supports material feed. Lrsdetvm Hdepfx Af Aow TECHNICAL DATA: - Total power: 27.3 kW - Air Jet system motor: 2.3 kW - Siemens control panel - Feed rate: up to 2 m/min - Saw frame stroke: 210 mm - 400 strokes per minute - Cutting height, steplessly adjustable on our frame: 45–250 mm - Maximum achievable cutting height: 400 mm - Cutting width with lateral pressure: 80–205 mm - Minimum block length: 250 mm - Lamella thickness from 1.5 mm (depending on wood type and cutting height) - Saw kerf: 0.9–1.1 mm depending on cutting height - Length: approx. 5000 mm - Width: approx. 1300 mm - Height: approx. 2600 mm - Weight: 5000 kg Pneumatic feed pusher included Supplied with the machine: - complete large saw blade frame - small saw blade frame - frame pins - frame tensioning wedges - saw blade spacers - wet-cutting saw blades - dry-cutting saw blades - set of upper transport rollers - 4 lower transport rollers - complete set of slides - frame yokes - pocket cutting guides - loading magazines - DTR documentation - electrical diagram

Stanje: novo, Leto izdelave: 2025, CE-zertifizierte Betonmischanlagen, 24/7 Kundensupport und After-Sales-Service. KOSTENLOSE MONTAGE & SCHULUNG. EINFACHER TRANSPORT & SCHNELLE MONTAGE (in 2 Stunden). *MINIMALE INVESTITION FÜR ERDARBEITEN Lrsdpfx Aohzu N Iof Aew ALLGEMEINE TECHNISCHE DATEN Anlagentyp: Mobile Betonmischanlage mit PLANETENMISCHER Anlagenkapazität: 30 m³/Stunde frisch verdichteter Beton Mischerkapazität: 750/500 l (0,5 m³ verdichteter Beton) Elektronische Ausrüstung: Siemens Sonstiges Zubehör und Ausstattung: Italienisch Unbegrenzte Benutzer & Fernzugriff

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, obratovalne ure: 6.589 h, Funkcionalnost: popolnoma funkcionalen, We are selling a beautiful POSMILL E1100 machining centre, year of manufacture 2012. The machine has low spindle hours (6,589) and was used for single-part production. The machine is under power at the handover location and ready for demonstration. Technical data: X-axis: 1,100 mm Y-axis: 600 mm Z-axis: 510 mm Spindle/table distance: 120–630 mm Table dimensions: 1,300 x 600 mm Control: ITNC 530 - ITNC 530 control - Tool measurement system 35.1 - Workpiece measurement with probe - Linear measuring system on all axes - ICS (internal coolant supply) for internal machining - Various tools with holders - Chip conveyor - Filtration system - Workshop trolley with holders Lrjdpfxewkhy Te Af Asw - Machine vice

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw Lredpfeh Ayyqex Af Ajw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to correction.

Stanje: novo, Cutting capacity at 90°: round 350 mm Lrodpfsfg E Hlsx Af Aow Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice