Kolenčaste preše nakup rabljenega (40)

Stanje: pripravljen za uporabo (rabljen), Schmidt 32-151-01 Toggle Press Press PressControl 60 Pressing force: 15 kN Gedeulf A Eopfx Afqjtt Stroke: 40 mm Overrun time: 0.07 sec Overrun distance: 15 mm PressControl 60 Two-hand operation You are welcome to visit and inspect the machine. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For customers outside Germany, a net invoice can be issued. A valid VAT-ID is required. Subject to prior sale. Visit our shop and browse our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data as well as errors in the article description may occur and are subject to change.

Stanje: rabljeno, Leto izdelave: 1978, Pressure: 300 t Stroke: 88 mm Stroke rate: 50 strokes/min Distance between table/ram, max. stroke up, adjustment up: 380 mm Table surface: 700 x 450 mm Table height above floor: 790 mm Clearance between side frames: 480 mm Ram surface: 480 x 470 mm Ram adjustment: 40 mm Drive power: 5.5 kW Weight: 8.4 t Space requirement (WxDxH): 2.0 x 1.6 x 3.3 m This is a 300 t Maypres toggle press Gtedpfxet Hmlks Afqet Press force: 300 t Stand width: 480 mm Stroke: 88 mm Installation height: 380 mm Ram adjustment: 40 mm Stroke rate: 50 strokes/min Table surface: 700 x 450 mm Ram surface: 480 x 470 mm Drive power: 5.5 kW Space requirement approx. 2.0 x 1.6 x 3.3 m Conventional control

Stanje: rabljeno, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture: approx. 1984 Pressing force: 60 tons Throat depth: 160 mm Table size: 580 x 360 mm Slide area: Ø 270 mm Clamping pin bore: Ø 40 mm Distance between uprights: 218 mm Slide stroke: 60 mm Ejector stroke: 15 mm Gtsdpfx Asv Uraaefqjt Slide adjustment: 30 mm Max. installation height: 300 mm (with intermediate table plate) Strokes per minute: 70 SPM Motor speed: 1400 rpm Motor power: 3 kW Power supply: 380 Volt, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Intermediate table plate L x W x H 580 x 360 x 58 mm, with holes and cut-outs - Mechanical ejector, ejector system in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety guard, UNIDOR safety enclosure with pneumatic front shield - Cam switchgear BALLUFF Space requirement L x W x H 1400 x 1200 x 1850 mm Weight: 3 tons Good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, Pressing force: 3,600 kN, Pressing stroke: 1.7 mm, Pressing capacity: 6,120 J. Stroke: 60 mm, Installation height: 340 mm. Table clamping width/depth: 440 mm/525 mm, Tool holder width/depth: 440 mm/320 mm. Dimensions (LxWxH): 1,300 mm x 2,000 mm x 2,230 mm, Weight: approx. 6,300 kg. Gsdpfsr A Eifox Afqett

Stanje: dober (rabljeno), Leto izdelave: 1980, For sale: 200-ton toggle press Gtodpfxev Uxwle Afqjt The price listed in the advertisement is net and VAT must be added.

Stanje: novo, Pressure: 8.0 kN Stroke: 40 mm Throat depth: 90 mm Working height: 50 - 200 mm Table size: 120 x 160 mm Machine weight: approx. 22 kg Dimensions (L x W x H): 160 x 230 x 410 mm Toggle manual press with precise height adjustment – SPECIAL PRICE! • Working height adjustable by simply loosening the clamping screws on the column Gjdpfx Afsfv Avksqjtt • Fine adjustment of working height (HK 800): millimetre-precise setting of the press head to the desired working height. The fine adjustment is mechanically controlled in both directions via a threaded spindle • Ergonomically positioned hand lever, spring-assisted return

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Pressure: 125 tons Lateral frame passages: yes Installation height: 380 mm Table surface: 1100 x 700 mm Gtjdpfsdvb Tfox Afqjt Ram surface: 700 x 350 mm Stroke: 01-120 mm Max. strokes per minute: approx. 70 Power requirement: 22 kW Weight: 8,500 kg Height: 2,900 mm

Stanje: rabljeno, stiskalna sila: 1.500 t, pritisk: 6 letvica, obratovalni tlak: 6 letvica, potrebna višina: 80 mm, zahteva za prostor dolžina: 60 mm, potrebna širina: 45 mm, hod: 60 mm, Mini press Alfamatic Tromboline type B-15 Ideal for prototype and series assembly, very easy to program. Equipped with CSQ Visual control system for force and stroke data processing, with various functions and the possibility to connect to a computer. Godpfx Afsv Hp Husqett

Stanje: novo, Pressure: 34.0 kN Gtsdpfx Afefv Avyeqst Stroke: 40 mm Throat depth: 130 mm Working height (min. – max.): 80 – 240 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight: approx. 80 kg Dimensions (L x W x H): 375 x 200 mm Toggle lever pneumatic presses Including fine adjustment of the working height via bevel gear with side-mounted handwheel, comfortable and easy to set. Toggle lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Stanje: novo, Pressure 1.5 kN Stroke 40 mm Throat Depth 70 mm Working Height from/to 75 - 170 mm Table Surface 115 x 70 mm Machine Weight approx. 11 kg Gtedpfx Asfv Av Defqot Dimensions (L x W x H) 115 x 175 x 290 mm Rack and Pinion Hand Presses HZ 150 The force is transmitted via a rack-and-pinion mechanism. These presses are used where a constant pressure is required during the operation. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressing performance, T-slot machined centrally according to DIN 650, T-slot nuts fit precisely.

Stanje: novo, Pressure: 500 kN Stroke: 40 mm Throat depth: 73 mm Working height: from 60 to 150 mm Table size: 115 x 70 mm Gtedpfof Nb Exex Afqjt Machine weight: approx. 10 kg Toggle Press Special Offer!!! • Adjustable working height by simply loosening the clamping screws on the stand • Fine adjustment of working height on the HK 800: Precise adjustment of the press head to the required working height. The fine adjustment is carried out positively in both directions via a threaded spindle • Ergonomically positioned hand lever, spring-assisted return

Stanje: novo, Pressure: 17.0 kN Stroke: 40 mm Throat depth: 110 mm Working height (min–max): 70–220 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight approx.: 60 kg Gjdpfx Aefv Avvefqstt Dimensions (L x W x H): 310 x 190 mm Toggle-lever pneumatic presses Including fine adjustment of working height via bevel gear and side crank — convenient and easy to set. Toggle-lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Stanje: novo, Pressure 17.0 kN Stroke 60 mm Throat depth 105 mm Working height from 75 to 180 mm Table surface 170 x 130 mm Spindle diameter 25 mm Machine weight approx. 35 kg Dimensions L x W x H 260 x 130 x 415 mm Gedpfxjfv Avnj Afqjtt Toggle Presses SPECIAL PRICE!!! HK 1700, 60 mm stroke, with crank and fine working height adjustment Stand height 450 mm Achieve even higher pressing force in production—without additional physical effort. Toggle lever technology provides maximum pressing force just before the end of the stroke. Exceptionally robust design of spindle head and frame.

Stanje: novo, Pressure 26.0 kN Stroke 60 mm Throat depth 110 mm Working height from 70 to 250 mm Table size 190 x 140 mm Spindle diameter 30 mm Machine weight approx. 46 kg Dimensions (L x W x H) 310 x 140 x 475 mm Toggle Presses SPECIAL PRICE!!! HK 2600, stroke 60 mm, incl. fine adjustment of working height via bevel gear with side handwheel – convenient and easy to set up. Stand height 475 mm Achieve even more pressing force in production without additional effort. Maximum pressing force just before end of stroke thanks to toggle lever mechanism. Godpjfv Avrefx Afqstt Especially robust spindle head and stand construction.

Stanje: novo, Pressure: 2.5 kN Stroke: 45 mm Throat depth: 90 mm Working height (min.–max.): 80–220 mm Table size: 120 x 60 mm Machine weight: approx. 22 kg Dimensions (L x W x H): 160 x 230 x 390 mm Gsdpsfv Av Iefx Afqott Rack and Pinion Hand Press HZ 250 The force is transmitted via a rack and pinion system. It is used wherever constant pressure is required throughout the working process. Precisely manufactured; spindle hardened and ground; unlimited service life. Long spindle guide, optimal pressing force. T-slot according to DIN 650, milled centrally, T-slot nuts fit precisely.