Mlinčki za plastiko nakup rabljenega (109)

Stanje: rabljeno, Cutting screen, shredder screen, screen basket, screen for chipper, shredding plant, single-shaft shredder, granulator, comminution machine - Perforation: 65 x 65 mm - Mounting holes: Ø 75/30 mm - with support ribs - Drawing available in the images - Dimensions: 1600/1844/H620 mm Hjdpfxeb Hiyls Ab Tofr - Weight: 696 kg

Leto izdelave: 2024, Stanje: novo, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces The compact redesign integrates the best features of the proven GST and GSC series, with a particular focus on weight, handling, and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in ultra-quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and up to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. As with all ZERMA granulators, both rotor and stator knives can be adjusted outside the machine, minimizing maintenance downtime. The pronounced tangential, curved rear wall of the cutting chamber, combined with the aggressive, open rotor design, ensures reliable material feeding and minimizes the risk of blockages. These compact granulators are suitable for blow-molding operations and ideal for recycling large parts such as bottles, jerrycans, and crates. Thanks to their low feed height, they can be easily loaded by hand or with a small conveyor belt. Low noise emissions and a small footprint make these granulators the perfect solution for inline granulation. Optional rear wall with raised stator knife (M version): Hfsdpfxop Sr H Dj Ab Ter The feed method with a higher-positioned stator knife is especially suited for thick-walled and more compact parts, such as injection-molded components, profiles, sheets, etc. The cutting geometry and the rotor’s reduced aggressiveness result in high-quality regrind, regardless of the material’s type or form (e.g. injection-molded parts, profiles, sheets, etc.). Control system and control cabinet: The integrated control system and operator console fully comply with all applicable safety regulations and can be tailored to specific requirements. In addition, peripheral equipment such as infeed conveyors, metal detection systems, and discharge units can be seamlessly integrated into the machine’s control system. An optional intelligent energy-saving function is available to improve efficiency, automatically reducing power consumption during idle times and starting or stopping the system based on the status of upstream machines. Standard configuration with blower, 0.75 kW power consumption, and 400 cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 700 Feed opening (mm): 380 x 450 Feed opening for M version option (mm): 295 x 450

Stanje: dober (rabljeno), Equiptec dryer, 600 liters Hedpjl Sknxsfx Ab Tjfr

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3 rotor knives Hfodpjvzt Uxjfx Ab Tjr 2 stator knives Knife inlet 220 x 200 mm Power 3 kW

Leto izdelave: 2024, Stanje: novo, Slow-Speed Granulator Rotor Diameter (mm): 180 Rotor Width (mm): 180 Rotor Speed (rpm): 150 Drive (kW): 3 Number of Rotor Blades: 18 Number of Stator Blades: 2 Screen Perforation (mm): >5 Weight approx. (kg): 140 The slow-speed granulators of the GSL Series are primarily used in injection moulding and blow moulding applications for inline granulation of sprues and defective parts. Various hopper and extraction systems allow for flexible integration of the machines into existing installations. GSL 180 For granulating sprues in injection moulding and blow moulding processes. Features of the GSL Series: - Low noise level thanks to the low rotor speed, inclined cut, and sound-insulated hopper in a multi-layer sandwich design Hedpfxsiy D Szj Ab Tsfr - Powerful and efficient drive using branded gearbox - Easy maintenance, cleaning, and blade replacement The slow-speed granulators of the GSL 180 Series are equipped with a closed rotor with a diameter of 180 mm. The machines are available in working widths from 120 mm to 430 mm. The rotor consists of individual discs which are directly coupled to the helical bevel gearbox via an oversized drive shaft. This ensures efficient and low-maintenance power transmission. The material to be granulated can be fed manually, via conveyor belt, or by robot through a generously sized, soundproofed hopper with sandwich construction. As standard, the granulator is mounted on a low base frame with swivel castors. Discharge is via an extraction tray, inserted below the screen, with a pipe connection for a suction conveyor. Applications The slow-speed granulators of the GSL 180 Series are specially designed for the granulation of sprues from injection moulding and blow moulding processes. Thanks to easy access, colour and material changes can be carried out quickly. The low rotor speed also enables the processing of both soft and hard materials and ensures high material quality with minimal fine dust content.

Stanje: dober (rabljeno), Beccaria 300-litre mixer silo Hfsdpol Sknuofx Ab Tor

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3 rotor blades Hsdpfevzuapsx Ab Tjfr 2 stator blades Knife feed opening 220 x 200 mm Power 3 kW

Leto izdelave: 2024, Stanje: novo, Direct drive via gear motor No adjustment work required thanks to special rotor knives Easy access for maintenance and cleaning Low noise emissions and low-dust granulate thanks to slow rotor speed Universally applicable with numerous options Rotor diameter (mm): 300 Rotor width (mm): 400 Rotor speed (rpm): 150 Drive power (kW): 7.5 Number of rotor knives: 33 Hfedpfjn Hqxfex Ab Tsr Number of stator knives: 2 Screen perforation (mm): > 6 Approx. weight (kg): 550

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3 rotor knives 2 stator knives Hodpfx Asvzt T Uob Tjfr Feed opening 220 x 200 mm Power 3 kW

Leto izdelave: 2024, Stanje: novo, Slow-running beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 180 Rotor speed (rpm): 150 Drive (kW): 3 Number of rotor knives: 18 Number of stator knives: 2 Screen perforation (mm): >5 Weight approx. (kg): 140 The slow-running beside-the-press granulators of the GSL series are primarily used in injection moulding and blow moulding for inline size reduction of sprues and defective parts. With various hopper and extraction systems available, these machines can be flexibly integrated into existing installations. GSL 180 For granulating sprues from injection moulding and blow moulding processes Highlights of the GSL series: - Low noise operation due to the rotor’s low speed, inclined cut, and a multi-layer, sound-insulated hopper in sandwich construction Hfodpfx Aoqmik Iob Tjr - Powerful and efficient drive thanks to branded gear units - Easy maintenance, cleaning, and knife change The slow-running beside-the-press granulators of the GSL 180 series feature a closed rotor with a diameter of 180 mm. The machines are available in working widths from 120 mm up to 430 mm. The rotor consists of individual discs directly connected to the spur gear via an oversized drive shaft, ensuring efficient and low-maintenance power transmission. The material to be granulated can be fed manually, via conveyor belt, or by robot through the generously sized, sound-insulated hopper with sandwich construction. As standard, the granulator is mounted on a low base frame with swivel castors. Discharge is via a suction pan mounted under the screen, with a pipe connection for a suction conveyor. Applications The slow-running beside-the-press granulators of the GSL 180 series are specifically designed for granulating sprues generated in injection moulding and blow moulding applications. The easy accessibility of the machine allows for quick colour and material changes. The low rotor speed also enables the processing of both soft and hard materials, guaranteeing high-quality material output with minimal dust.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3 rotor knives 2 stator knives Knife inlet 220 x 200 mm Hfjdpfxov A Ahdo Ab Tor Power 3 kW

Leto izdelave: 2025, Stanje: novo, Slow-speed beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 430 Rotor speed (rpm): 150 Drive power (kW): 4 Number of rotor knives: 45 Number of stator knives: 2 Screen perforation (mm): >5 Weight approx. (kg): 250 The slow-speed beside-the-press granulators of the GSL series are primarily used in injection molding and blow molding applications for inline granulation of sprues and defective parts. With various hopper and extraction systems, the machines can be flexibly integrated into existing installations. GSL 180 — Designed for granulating sprues from injection molding and blow molding processes Highlights of the GSL series: Hodpfxei Hpfde Ab Tefr - Low noise operation due to slow rotor speed, angled cutting design, and multi-layer sandwich-constructed soundproof hopper - Powerful and efficient drive system with branded gearbox - Easy maintenance, cleaning, and knife replacement The slow-speed beside-the-press granulators of the GSL 180 series feature a closed rotor with a diameter of 180 mm. The machines are available with working widths from 120 mm up to 430 mm. The rotor consists of individual disks, which are directly connected to the spur gear drive via an oversized drive shaft. This ensures efficient and low-maintenance power transmission. The material to be granulated can be fed manually, by conveyor, or robot through a generously sized, soundproofed sandwich-constructed hopper. By default, the granulator is mounted on a low-profile frame with swivel castors. Discharge is carried out via a suction trough positioned beneath the screen, equipped with a pipe connection for a vacuum conveyor. Applications The slow-speed beside-the-press granulators of the GSL 180 series are specially designed for the granulation of sprues from injection molding and blow molding processes. Easy accessibility allows for rapid color and material changes. The low rotor speed enables the processing of both soft and hard materials and ensures good material quality with minimal dust generation.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3 rotor knives Hjdpfxov A Ahke Ab Tsfr 2 stator knives Knife inlet 220 x 200 mm Power 3 kW

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.000 kg, premer rotorja: 400 mm, število rezil: 6, dolžina rotorja: 600 mm, širina rotorja: 400 mm, moč: 22 kW (29,91 KM), širina odprtine za polnjenje: 490 mm, dolžina polnilne odprtine: 590 mm, trajanje garancije: 12 meseci, vhodna napetost: 400 V, The compact inline granulators of the GST series are suitable for use in injection molding and blow molding operations. They are ideal for recycling, for example, voluminous parts such as bottles, cans, crates, sprues, and injection-molded components. Thanks to their low feed height, the machines can be easily loaded with material by hand or with a small conveyor belt. Low noise emissions and a compact footprint make the GST series the perfect solution for inline size reduction. All GST series machines feature a compact, sound-insulated machine housing and a sound-dampened feed hopper. The feed hopper can be opened and closed using a gas strut. These compact granulators are available with two rotor diameters (250 mm, 400 mm) and rotor widths from 300 to 1000 mm. The smaller models are equipped with an open F-rotor, while the larger machines feature the heavier-duty S-rotor. The curved back wall of the cutting chamber ensures aggressive material intake and prevents material blockages. Thanks to the modular design, the granulator can be easily expanded with further options, such as replaceable wear plates. As with all ZERMA granulators, rotor and stator knives can be adjusted outside the machine, minimizing downtime during maintenance. An adjustment gauge is included. The control cabinet is mounted externally on the sound enclosure, with all wiring routed internally. Rotor diameter (mm): 400 Rotor width (mm): 600 Drive (kW): 22 Rotor knives (rows): 3 x 2 Hfodpfsvgncujx Ab Tjr Stator knives (rows): 2 Screen hole diameter (mm): > 6 Cutting chamber (mm x mm): 400 x 600 Weight (approx. kg): 2000

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3 rotor knives 2 stator knives Hedsv A Agyspfx Ab Tjfr Knife inlet 220 x 200 mm Power 3 kW

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Optimization of an established concept. Size reduction of large-volume blow-moulded parts as well as start and end pieces A compact redesign integrates the best features of the proven GST and GSC series, with a particular focus on weight, ease of handling, and energy efficiency. These compact granulators are fully sound-insulated, resulting in exceptionally quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, rotor and stator knives can be adjusted outside of the machine to minimize downtime during maintenance. The highly tangential, curved rear wall of the cutting chamber, in combination with the aggressively open rotor design, guarantees reliable material feed and minimizes the risk of blockages. These compact granulators are suitable for use in blow-moulding operations and ideal for recycling voluminous parts such as bottles, canisters, and crates. Due to the low feeding height, the machines can be loaded easily by hand or with a small conveyor. Low noise emission and minimal footprint make this granulator a perfect solution for inline size reduction. Optional rear wall with elevated stator knife (M version): The feeding method with an elevated stator knife is better suited for thicker-walled and more compact parts, such as injection-moulded parts, profiles, sheets, etc. With the specialized cutting geometry and less aggressive rotor, high-quality regrind is produced regardless of material type or shape, including injection-moulded parts, profiles, sheets, etc. Control system and control cabinet: The integrated control system and operator panel comply with all applicable safety regulations and can be tailored to specific requirements. Furthermore, peripheral devices such as feed conveyors, metal detectors, and discharge systems can be seamlessly integrated into the machine's control system. For increased efficiency, an optional intelligent energy-saving function is available, reducing power consumption during idle periods and allowing the system to start and stop automatically based on the status of upstream equipment. Standard configuration with blower, power input 0.75 kW, and 400 cyclone Hedpfx Absum Rnvj Tofr Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 700 Feed opening (mm): 380 x 450 Feed opening, M version option (mm): 295 x 450

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Motan Model: 40-20/BL-T MT Hjdpfx Abeuk Aiyj Tsfr Power: 3 kW Feed opening: 40 x 20 cm Technical condition: very good

Leto izdelave: 2025, Stanje: novo, The compact mills of the G and H series are primarily designed for use in injection molding and blow molding applications for recycling bulky components such as bottles, canisters, and crates, as well as for flush blow molding and injection sprues. Due to their low height, they are ideally suited for manual feeding of such parts. Their low noise level and small footprint make them perfect for inline recycling operations. Advantages: - Compact design, minimal footprint - All knives are adjusted outside the machine in a fixture to reduce downtime during maintenance - Aggressive feeding thanks to the curved rear wall of the cutting chamber - Large screen area for high throughput rates - Modern V-cut technology produces high-quality regrind while reducing energy consumption and noise emissions Hedpjp N Drxjfx Ab Tefr Technical Data: - Rotor diameter (mm): 250 - Rotor width (mm): 450 - Drive capacity (HP): 15 - Rotor knives (pcs): 3 x 1 - Stator knives (rows): 2 - Hopper opening (mm): 340 x 450 - Total length (mm): 1207 - Machine length (mm): 860 - Total width (mm): 1020 - Machine width (mm): 684 - Height (mm): 1712

Leto izdelave: 1995, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 3 rotary knives 2 stationary knives Hfodpfx Abjv Nnr Ie Tsr Knife feed opening 220 x 180 mm Power 3 kW

Leto izdelave: 2025, Stanje: novo, Size reduction of large-volume blow-moulded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with particular emphasis on weight, handling, and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. As with all ZERMA granulators, rotor and stator knives can be adjusted outside of the machine to minimize maintenance downtime. The strongly tangential, curved rear wall of the cutting chamber, in combination with the aggressive open rotor design, ensures reliable material feeding and minimizes the risk of blockages. These compact granulators are suitable for use in blow moulding operations and are ideal for recycling large items such as bottles, canisters, crates, etc. The low infeed height allows the machines to be easily loaded by hand or with a small conveyor belt. Low noise emissions and minimal footprint make the granulator the perfect solution for inline size reduction applications. Optional rear wall with elevated stator knife – M Version: The feeding method with a higher stator knife is better suited for thicker-walled and more compact parts such as injection-moulded parts, profiles, sheets, etc. Due to the cutting geometry and reduced aggressiveness of the rotor, the machine produces high-quality regrind regardless of the material type or shape, such as injection-moulded parts, profiles, sheets, etc. Control system and control cabinet: The integrated control and operation console not only complies with all applicable safety regulations but can also be customized to meet specific requirements. Additionally, peripheral devices such as feed conveyors, metal detection, and discharge systems can be seamlessly integrated into the machine’s control system. For enhanced efficiency, an optional intelligent energy-saving function is available, which reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW, and 400 cyclones. Rotor diameter (mm): 250 Hfedpop Sr Anefx Ab Tjr Rotor width (mm): 300 Drive (kW): 7.5 Number of rotor knives: 3 x 1 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 950 Feed opening (mm): 380 x 300 Feed opening option for M version (mm): 295 x 300

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: PRM Model: MGK2121R-1 Hfjdpeuwdv Aofx Ab Ter Year of manufacture: 1995 Power: 3 kW

Leto izdelave: 2025, Stanje: novo, Reduction of large-volume blow-molded parts as well as start and end pieces Hfjdpfx Abep Sr Iao Ter The best features of the proven GST and GSC series have been combined in a compact redesign, with particular emphasis on weight, handling, and energy efficiency. These compact granulators come fully soundproofed, resulting in extremely quiet operation. The granulators are available with a rotor diameter of 250 mm and widths of 300, 450, or 600 mm. The curved rear wall of the cutting chamber provides aggressive material intake and prevents material blockages. As with all ZERMA granulators, rotor and stator knives can be adjusted outside the machine to minimize downtime during maintenance. The highly tangential, curved rear wall of the cutting chamber, combined with the aggressive open rotor design, ensures reliable material intake and minimizes the risk of clogging. These compact granulators are suitable for use in blow molding operations. They are ideal for recycling large-volume items such as bottles, canisters, and crates. Thanks to the low feed height, material can easily be fed manually or via a small conveyor belt. The low noise emission and compact footprint make this granulator a perfect solution for inline size reduction. Optional rear wall with elevated stator knife M version: The feed method with an elevated stator knife is better suited for thicker and more compact parts, such as injection-molded parts, profiles, and sheets. The cutting geometry and reduced rotor aggressiveness result in high-quality regrind, regardless of material type or shape, including injection-molded parts, profiles, sheets, etc. Control system and control cabinet: The integrated control system and operator console not only meet all current safety regulations but can also be adapted to specific requirements. Furthermore, peripherals such as feed conveyors, metal detection systems, and discharge systems can be seamlessly integrated into the machine’s control system. For improved efficiency, an optional intelligent energy-saving function is available, which reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW, and 400 cyclone Rotor diameter (mm): 250 Rotor width (mm): 600 Drive (kW): 11 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen hole diameter (mm): >6 Weight approx. (kg): 1450 Feed opening (mm): 380 x 600 Feed opening M version option (mm): 295 x 600

Leto izdelave: 1996, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Rapid Hfsdpfx Abjvndpaj Ter Model: 1521-L Year of manufacture: 1996

Leto izdelave: 2025, Stanje: novo, The compact mills of the G and H series are primarily designed for use in injection molding and blow molding applications for recycling bulky products such as bottles, canisters, and crates, as well as flash from blow molding and injection molding runners. Their low profile makes them ideal for manual feeding of such parts. The low noise level and compact footprint make them perfectly suited for inline recycling operations. Benefits: - Compact design, minimal space requirement - All blades are adjusted outside the machine in a jig to reduce maintenance downtime - Aggressive material infeed thanks to the curved rear wall of the cutting chamber Hfjdpfsp N Dtrjx Ab Tor - Large screen area for high throughput rates - Advanced V-cut technology produces high-quality regrind while reducing energy consumption and noise emissions Technical Data: - Rotor diameter (mm): 250 - Rotor width (mm): 600 - Drive capacity (HP): 20 - Rotor blades (pcs): 3 x 1 - Stator knives (rows): 2 - Hopper opening (mm): 340 x 600 - Overall length (mm): 1348 - Machine length (mm): 1000 - Overall width (mm): 1165 - Machine width (mm): 834 - Height (mm): 1712

Leto izdelave: 2025, Stanje: novo, The compact mills of the G and H series are primarily designed for use in injection molding and blow molding applications for recycling bulky products, such as bottles, canisters, and crates, as well as for direct blow molding and injection sprues. Their low height makes them ideal for manual feeding of such parts. The low noise level and small footprint make them perfect for inline recycling operations. Benefits: - Compact design, minimal space requirements - All knives are adjusted outside the machine in a fixture to reduce downtime during maintenance - Aggressive material feed due to the curved rear wall of the cutting chamber - Large screen area for high throughput rates - Modern V-cut technology produces high-quality regrind while reducing both energy consumption and noise emission Technical specifications: Rotor diameter (mm): 250 Hfedpfxep N Dqtj Ab Tsr Rotor width (mm): 300 Drive capacity (hp): 10 Rotor knives (units): 3 x 1 Stator knives (rows): 2 Feed opening (mm): 340 x 300 Total length (mm): 1207 Machine length (mm): 860 Total width (mm): 870 Machine width (mm): 440 Height (mm): 1712