ZERMA GST250/450 granulator z votlim ohišjem

ZERMA GST 250/450

Leto izdelave: 2024, Stanje: novo, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces The compact redesign integrates the best features of the proven GST and GSC series, with a particular focus on weight, handling, and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in ultra-quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and up to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. As with all ZERMA granulators, both rotor and stator knives can be adjusted outside the machine, minimizing maintenance downtime. The pronounced tangential, curved rear wall of the cutting chamber, combined with the aggressive, open rotor design, ensures reliable material feeding and minimizes the risk of blockages. Hedpfx Aop Sr H Deh Djfn These compact granulators are suitable for blow-molding operations and ideal for recycling large parts such as bottles, jerrycans, and crates. Thanks to their low feed height, they can be easily loaded by hand or with a small conveyor belt. Low noise emissions and a small footprint make these granulators the perfect solution for inline granulation. Optional rear wall with raised stator knife (M version): The feed method with a higher-positioned stator knife is especially suited for thick-walled and more compact parts, such as injection-molded components, profiles, sheets, etc. The cutting geometry and the rotor’s reduced aggressiveness result in high-quality regrind, regardless of the material’s type or form (e.g. injection-molded parts, profiles, sheets, etc.). Control system and control cabinet: The integrated control system and operator console fully comply with all applicable safety regulations and can be tailored to specific requirements. In addition, peripheral equipment such as infeed conveyors, metal detection systems, and discharge units can be seamlessly integrated into the machine’s control system. An optional intelligent energy-saving function is available to improve efficiency, automatically reducing power consumption during idle times and starting or stopping the system based on the status of upstream machines. Standard configuration with blower, 0.75 kW power consumption, and 400 cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 700 Feed opening (mm): 380 x 450 Feed opening for M version option (mm): 295 x 450

Stanje: novo, Leto izdelave: 2024, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series were integrated, with a particular focus on weight, handling, and energy efficiency. These compact granulators are fully soundproofed, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and 600 mm. The contoured rear wall of the cutting chamber ensures aggressive material intake and prevents blockages. As with all ZERMA granulators, both rotor and stator knives are adjustable outside the machine, which reduces downtime during maintenance. The highly tangential, curved rear wall of the cutting chamber, in combination with the aggressive open rotor design, guarantees reliable material intake and minimizes the risk of blockages. Hodpfst Aagaox Ah Djfn The compact granulators are suitable for use in blow molding operations. They are ideal for recycling large and voluminous parts such as bottles, canisters, and crates. Thanks to the low feeding height, the machines can be easily loaded by hand or with a small conveyor belt. Their low noise emission and small footprint make these granulators a perfect solution for inline shredding. 98T8Mrx Optional rear wall with elevated stator knife M version: The intake method with an elevated stator knife is better suited for thicker-walled and more compact parts, such as injection molded parts, profiles, sheets, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, high-quality regrind is achieved regardless of material type or shape, such as injection molded components, profiles, sheets, etc. Control system and electrical cabinet: The integrated control system and operator console not only comply with all applicable safety regulations, but can also be adapted to specific requirements. Additionally, peripherals such as feed conveyors, metal detectors, and discharge systems can be seamlessly integrated into the machine’s control system. For improved efficiency, an optional intelligent energy-saving feature is available, which reduces power consumption during idle times and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW, and 400 cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Quantity of rotor knives: 3 x 2 Quantity of stator knives: 2 Screen hole size (mm): > 6 Weight approx. (kg): 700 Feed opening (mm): 380 x 450 Feed opening option M version (mm): 295 x 450