Waldrich nakup rabljenega (30)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, x-travel 14,000 mm y-travel 5,000 mm z-travel 1,500 mm w-axis 3,000 mm Column clearance 4,000 mm Gantry column: Distance table – spindle nose 4,500 mm Workpiece weight 100 t Table dimensions – longitudinal 9,000 mm Table dimensions – cross 3,000 mm Spindle taper ISO SK 50 Spindle speed 2–2,500 rpm Spindle drive 113 kW Spindle diameter 200 mm Kdedpevwgm Hefx Af Tsg Spindle torque 9,500 Nm Feed range x-axis 1–10,000 mm/min Feed range y-axis 1–10,000 mm/min Feed range z-axis 1–10,000 mm/min Rapid traverse 20,000 mm/min Height above floor 8,600 mm Control SIEMENS 840C Machine weight approx. 360 t >>> retrofit 2011

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control system: SIEMENS 840 D w-axis 1500 mm Column clearance: 2500 mm Clamping surface: 3000 x 2000 mm Workpiece weight: 10,000 kg Spindle speeds: 5-6000 rpm Gear stages: 2 Drive power – milling spindle: 45 kW Distance: milling spindle – clamping spindle: 3500 mm Spindle torque: 1250 Nm Tool changer capacity: 200 positions Tool diameter: 135 / 250 mm Maximum tool weight: 50 kg Maximum tool length: 400 mm Tool holder: ISO SK-50 The portal milling machine is in very good condition. Kdjdpfjvwgmmex Af Tog ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angular milling head: yes Automatic tool clamping: yes Ball screw drives: yes Guideway coverings: yes Coolant system: yes High-pressure cooling system (internal cooling): yes Fully enclosed work area: yes Portal machining center with tool changing system and second table plate.

Stanje: dober (rabljeno), Leto izdelave: 2005, x-travel: 6000 mm y-travel: 3500 mm z-travel: 1500 mm Control: SIEMENS 840D Table load capacity: 12 t Height above floor level: 6300 mm Table size (longitudinal): 5000 mm Table size (cross): 2500 mm Number of tables: 2 Tool changer: 200 positions Maximum tool weight: 30 kg Tool holder: HSK A 100 Maximum tool diameter: 250 mm Maximum tool length: 500 mm Spindle speeds: 5–6000 rpm c-axis: -10 to 370° b-axis: 5 to -95° Column passage: 3000 mm Kdsdpfjvwglvsx Af Tog Distance spindle nose to table: 1500 mm Machine weight: approx. 161 t Space requirement: approx. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec gantry milling machine is in very, very good condition and can be inspected at the seller’s facility by appointment.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2.4212.06, širina brušenja: 1.450 mm, teža obdelovanca (maks.): 11.000 kg, dolžina brušenja: 3.000 mm, širina mize: 3.000 mm, dolžina mize: 1.250 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table and Workpiece Table clamping surface: 3,000 x 1,250 mm Total table size: 6,000 x 1,800 x 1,000 mm Clearance between columns: 1,650 mm Grinding length: 3,000 mm Grinding width: 1,450 mm Max. workpiece height: 1,250 mm Crossbeam adjustment: 1,250 mm Max. workpiece weight: 11 t Table feed: 1 to 45 m/min Control System and Grinding Supports Universal grinding support: 7.5 kW Swiveling of the grinding spindle: +/- 110° Grinding wheels (universal support): 500 x 60 mm Vertical adjustment (universal support): 350 mm Peripheral grinding support: 22 kW Grinding wheels (peripheral support): 600 x 120 mm Vertical adjustment (peripheral support): 150 mm MACHINE DETAILS Electrical Data Total connected load: 40 kW Kdedpfxsw Srzce Af Teg Dimensions & Weight Weight: approx. 45 t Installation dimensions: 12,000 x 6,000 x 4,800 mm Note: The machine can be dismantled and loaded for €10,000.

Stanje: rabljeno, Grinding length 12,000 mm Grinding width 2,800 mm Workpiece height 2,510 mm Control Siemens 840 D Workpiece weight 24,000 kg Kedpswa Dxwefx Af Tedg Column passage 2,820 mm Table clamping area 11,990 x 2,500 mm Table feed rate 1 - 40 m/min Crossrail adjustment 2,510 mm Total power requirement 110 kW Floor space approx. 32.5 x 9 x 6.73 m Machine weight approx. 151 t Equipment/Accessories: - 1 universal grinding support, 22 kW Swiveling grinding spindle +/- 110° Peripheral grinding wheel dimensions Ø 700 x 130 mm Vertical adjustment 1,000 mm With dressing device - 1 peripheral grinding support, 30 kW Grinding wheel dimensions Ø 600 x 150 mm Vertical adjustment 230 mm With dressing device - Coolant and filter unit - Various grinding wheel adapters - Technical documentation

Stanje: rabljeno, Grinding length: 4000 mm Grinding width: 1450 mm Workpiece height: 1250 mm Control: Siemens 840 D Workpiece weight: 11,000 kg Column passage: 1460 mm Clamping surface of table: 4000 x 1250 mm Table feed rate: 1 - 45 m/min Crossbeam adjustment: 1250 mm Total power requirement: 40 kW Space requirements approx.: 12.3 x 6 x 4.8 m Equipment/Accessories: - 1 universal grinding support, 7.5 kW Swiveling grinding spindle +/- 110° Peripheral grinding wheel dimensions Ø 500 x 60 mm Vertical adjustment 350 mm with dressing device - 1 peripheral grinding support, 22.5 kW Grinding wheel dimensions Ø 600 x 100 mm Kodpfjwa Dx Dsx Af Todg Vertical adjustment 150 mm with dressing device - Fitted with 6 magnetic chucks on the table - Separate clamping table - Various grinding wheel holders - Technical documentation

Stanje: rabljeno, Upper slide, cross slide, cross table, cross-feed table - The upper slide is from a Waldrich Coburg portal milling machine, model: 12 D 3232-550 HL - Table surface: mm Kedoct Aa Rjpfx Af Tjdg - Travel: x 350 mm / y 220 mm - Dimensions: 1380/1000/H800 mm - Weight: 800 kg

Stanje: dober (rabljeno), Universal milling head, milling holder, milling extension, angle milling head Kdsdpfx Afsfxlf Ae Tsg - Manufacturer: Waldrich - Spare part: removed from a milling machine - Milling head: swiveling - Quill stroke: 150 mm - Spindle taper: SK50 - Motor: 11 kW, 1470 rpm - Spindle speed: 25 - 560 rpm - Transport dimensions: 1550 x 600 x H460 mm - Weight: 636 kg

Stanje: rabljeno, Technical Details: Kdodpfx Aswc A Snjf Tsg Grinding length: 12,000 mm Grinding width: 2,800 mm Workpiece height: 2,510 mm Max. workpiece weight: 24,000 kg Table area: 11,990 x 2,500 mm Clearance between columns: 2,820 mm Crossbeam adjustment: 2,510 mm Table feed: 1 - 40 m/min Total power requirement: 110 kW Approx. machine weight: 151 t Approx. space required: 32.5 x 9 x 6.73 m The machine is in very good condition and suitable for grinding with the highest precision! In 2022, mechanical components were refurbished by WALDRICH COBURG for approx. EUR 600,000. Equipped with SIEMENS 840 D CNC control 1 universal grinding support, 22 kW Swiveling grinding spindle +/- 110° Peripheral grinding wheel dimension: Ø 700 x 130 mm Vertical adjustment: 1,000 mm with dressing device 1 peripheral grinding support, 30 kW Grinding wheel dimension: Ø 600 x 150 mm Vertical adjustment: 230 mm with dressing device Coolant and filter unit Various grinding wheel mounts

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, obratovalne ure: 1.930 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 4.200 mm, pomik po osi Z: 1.750 mm, hitrost pomika os X: 15.000 m/min, hitrost podajanja osi Y: 15.000 m/min, hitrost podajanja os Z: 15.000 m/min, skupna dolžina: 15.000 mm, dolžina mize: 5.000 mm, skupna širina: 15.000 mm, hitrost vretena (min.): 10 obr/min, največja hitrost vretena: 4.000 obr/min, skupna višina: 7.500 mm, višina mize: 1.350 mm, razdalja med stojali: 3.500 mm, vrsta vhodnega toka: Klimatska naprava, obremenitev mize: 65.000 kg, teža obdelovanca (maks.): 65.000 kg, razdalja od središča mize do nosu vretena: 2.300 mm, skupna masa: 210.000 kg, moč vretenovega motorja: 50.000 W, Opis je v PDF prilogi. Kodpfjvv N I Rex Af Tjdg

Stanje: rabljeno, x-travel 17,700 mm Kdodpsvkit Ajfx Af Teg y-travel 4,755 mm z-travel 800 mm Milling width 3,450 mm Distance table to vertical milling spindle 3,682 mm Table height above floor 500 mm Spindle diameter in front bearing 200 mm Speed range 12 – 450 rpm Tool holder ISO 60 Axial adjustment of spindle slide 800 mm Creep feed 5 and 50 mm/min Infinitely variable feed 10 – 3,000 mm/min Cross adjustment of crossbeam milling support 4,745 mm Rapid traverse 2 m/min Creep feed 3 and 30 mm/min Infinitely variable feed 6 – 2,000 mm/min Rapid traverse 10 m/min Creep feed 3 and 30 mm/min Infinitely variable feed 6 – 2,000 mm/min Vertical adjustment of the crossbeam 3,682 mm Rapid traverse 1.5 m/min Creep feed 1.25 and 12.5 mm/min Infinitely variable feed 5 – 1,500 mm/min Table size 17,800 x 2,800 mm Column passage 3,600 mm Control SIEMENS 840 C Table load 50,000 / 100,000 kg Main spindle drive power 100 kW Total connected load 170 kW Machine weight approx. 300 t Space requirement approx. 40 x 8.4 x 8.6 m + complete electrics renewed including control cabinet, cabling, motors and fitted with SIEMENS 840C in 1999. + including 16 milling heads and various tools. The X-axis drive consists of a hydrostatic worm gear with a hydrostatic rack.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3.6002, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, obremenitev mize: 12.000 kg, TEHNIČNI PODATKI X-os: 4.000 mm Y-os: 3.000 mm Z-os: 1.500 mm Prehodna višina: 1.550 mm Prehodna širina: 2.500 mm Širina mize: 2.000 mm Dolžina mize: 3.000 mm maks. obremenitev mize: 12.000 kg Vpenjalni sistem orodja: HSK-A100 maks. teža orodja: 30 kg maks. premer orodja: 250 mm maks. dolžina orodja: 500 mm Kodpexvrb Njfx Af Tsdg Območje vrtalne hitrosti: 5-6.000 obr/min največji dovoljeni navor na vretenu za rezkanje: 800 Nm PODATKI O STROJU Skupna potrebna moč: 30 kW Prostor za postavitev pribl.: 9,5 x 6,7 x 6,2 m OPREMA Demmeler menjalnik palet

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Kjdpfx Aotzdyzof Tedg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1988, 4-axis CNC-controlled gantry milling machine WALDRICH COBURG, clearance between uprights 3,100 mm, movable crossbeam clearance 2,500 mm, 3 pallets with clamping surface 2,750 x 4,000 mm, automatic pallet changer, 75 kW drive power at rated speed 76 rpm, speed range 5 - 2,000 rpm, max. spindle torque 8,400 Nm, slide dimensions 600 x 600 mm, tool holder ISO 50/60, 3 angular heads, one automatic extension attachable, internal coolant supply, optionally available with new electrics and new CNC control. Kdodpfodu Hg Hjx Af Tog

Stanje: zelo dobro (rabljeno), Leto izdelave: 1962, številka stroja/vozila: 12.178, CNC Roll Grinding Machine WALDRICH SIEGEN, retrofitted in 1996 with CNC control by HERKULES. Max. grinding diameter 1,200 mm, max. grinding length 5,000 mm, max. roll weight between centers 25 t. The machine is being retrofitted again in 2023 with new CNC control, new drives, new control cabinet, new wiring, and a new measuring system. The machine can be inspected at our warehouse by appointment. Kjdpfx Aofbb D Djf Tsdg

Stanje: pripravljen za uporabo (rabljen), Na voljo je star portalni skobeljni stroj (brusilni stroj za vodilne tire) Waldrich Coburg. Dolžina postelje: 5500 mm, širina postelje: 750 mm, mere stroja X/Y/Z: cca 12000 mm/300 mm/3000 mm, teža: cca 37500 kg. Ogled na lokaciji je možen. Kjdpfxjw Rqw Hs Af Todg

Stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 1973, širina brušenja: 1.600 mm, dolžina brušenja: 3.500 mm, Waldrich Coburg 15-10 S20 20 Kdjdpfjv Th Hgjx Af Tjg

Stanje: rabljeno, Leto izdelave: 1968, širina brušenja: 1.800 mm, teža obdelovanca (maks.): 16.000 kg, dolžina brušenja: 4.500 mm, razdalja med stojali: 1.900 mm, višina brušenja: 1.650 mm, širina mize: 1.500 mm, dolžina mize: 4.500 mm, Dolžina brušenja: 4500 mm – Omogoča obdelavo dolgih obdelovancev v eni nastavitvi. Širina brušenja: 1800 mm – Nudi dovolj kapacitete za široke površine, kar omogoča učinkovito brušenje večjih plošč ali struktur. Kdedpfox Rx R Nsx Af Tsg Največja teža obdelovanca: 16.000 kg – Omogoča obdelavo težkih industrijskih kosov brez kompromisa glede stabilnosti. Dimenzije mize: Običajno približno 4500 mm x 1500 mm.

Stanje: dober (rabljeno), Control: Siemens 810 Max. roller grinding diameter: 1000 mm Kdodpfx Asq Dmkwsf Tsg Max. roller grinding length: 5260 mm Max. roller weight: 16 tons

Stanje: rabljeno, Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Angular milling head - Manufacturer: Waldrich Siegen Kodpfx Afsrfw R Hj Tsdg - Model: ET500 - Reference No.: 11290/731

Stanje: dober (rabljeno), Leto izdelave: 1995, obratovalne ure: 43.499 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 1.000 mm, 5-Axis Gantry Milling Machine WALDRICH Product manufactured on the machine: AIRBUS LANDING GEAR (aerospace) Year of manufacture: 1995; Year of delivery: 1998 Installation & commissioning: 1999 Operating period: 03/1999 to 07/2022 (21 years) Kdjdpox Hxdzefx Af Tsg Condition: Very Good Customer specifications / History Previous owner (1999–2022): German aerospace group Technical data Travel & Working Area X-axis (table longitudinal travel): 4,000 mm Y-axis (cross slide traverse): 2,500 mm Z-axis (ram vertical travel): 1,000 mm Distance between columns: 2,000 mm C-axis: 360,000 positions (increment 0.001°) B-axis: 360,000 positions Tables & Pallets Number of tables: 2 Table dimensions: 1,500 x 3,000 mm Table height above floor: 740 mm Max. table load: 12,000 kg Feed & Rapid Traverse X/Y/Z: Feed 0–6,000 mm/min, Rapid 15,000 mm/min B-axis Rotary: 0–3,600 deg/min C-axis Rotary: 0–3,600 deg/min Feed Forces / Torque X/Y/Z max.: 30 kN each C-axis detachable torque: max. 20,000 Nm C-axis bearing regulation: max. 4,000 Nm Speed Range Level I: 20–875 rpm Level II: 876–4,000 rpm Spindle Drive Power: 50 kW Speed range: 20–4,000 rpm Tool Change System Type: Chain magazine Capacity: 120 tools Tool holder: ISO 50 Max. tool Ø: 315 mm Tool Ø at full capacity: 100 mm Max. tool length: 550 mm Max. tool weight per gripper: 35 kg Spindle Units / Clearances Vertical spindle unit: spindle nose – table surface 250–1,250 mm Horizontal spindle unit: spindle centre – table surface 150–1,150 mm Rotary Nutator (MC303): spindle centre – table surface 45–1,045 mm Coolant & Lubrication Coolant supply: internal and external available Lubrication: automatic (spindle bearings and gearbox) Dimensions & Weight Machine dimensions (approx.): Length: 14,700 mm Width: 10,000 mm Height above floor: 6,079 mm Total machine weight (approx.): 72,500 kg Machine bed: 8,500 kg Machine table & pallet: 16,000 kg 2 columns: 10,200 kg Crossbeam with platform: 20,000 kg Features & Accessories Fully automatic tool changer (ATC): 120 positions (ISO 50) Fully automatic head changer incl. universal milling heads Milling head: C-axis: 360,000 x 0.001° B-axis: 360,000° Accessories: 3 chip conveyors Tool cabinet + pallets with loose accessories Packing List (Transport Dimensions) Axes: 8,950 x 1,700 x H 1,000 mm 2 tables: 3,300 x 1,700 x H 340 mm Tool changer with slide: 3,500 x 2,300 x H 2,670 mm Tool changer without slide: 4,450 x 1,060 x H 1,870 mm Pick-up heads: 3,000 x 470 x H 2,200 mm Crossbeam: 7,000 x 2,000 x H 2,500 mm 2 support columns: 2,900 x 1,000 x H 1,500 mm Slide with ram: 3,450 x 1,800 x H 2,100 mm Chain section: 3,700 x 2,000 x H 1,100 mm Electrical cabinet No. 1: 5,400 x 600 x H 2,000 mm Electrical cabinet No. 2: 2,100 x 650 x H 2,000 mm Chip conveyor: 5,000 x 500 x H 2,300 mm Head: 900 x 600 x H 700 mm Tool cabinet: 2,100 x 1,200 x H 600 mm 7 pallets with loose accessories This WALDRICH SIEGEN 5-axis gantry milling machine is ideally suited for the machining of steel, cast iron, and non-ferrous metals. The combination of a 50 kW spindle drive, automatic tool changer (120 positions), fully automatic head changer, and high-precision B-/C-axis positioning (0.001°) makes it the ideal solution for demanding and complex manufacturing tasks.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Gantry-Type Portal Milling Machine / Manufacturer: WALDRICH SIEGEN / Model: PF-S-150 - 1953: Original year of construction (originally a planing machine) - 1974: Converted by WALDRICH SIEGEN into a portal milling machine (completely new milling support) - 2001: Upgraded to CNC, with new control cabinet - 2015: Conversion to NC table drive - 2024: Conversion to crossbeam drive (gantry) Kdedpfx Afox N Idvs Tsg Machining capabilities: - Milling / Drilling: both horizontal / vertical The machine can be inspected under power by appointment. Condition: Operational. TECHNICAL DATA / DESCRIPTION: Travel paths of feed axes (CNC): - Table: 14,000 mm - Crossbeam support: 4,500 mm - Crossbeam: 4,000 mm - Column clearance: Width 4,545 mm - Clear width: 4,200 mm - Height from table to spindle: 4,000 mm - Quill stroke: 450 mm - Table size / clamping surface: 14,000 x 4,350 mm - Table load capacity: max. 200 t (10 t point load) - Main spindle motor drive power: 125 kW - Total machine weight: approx. 350 t - Space required for entire machine: Length 40 m / Width 10 m / Height above floor 9 m EQUIPMENT / ACCESSORIES: - CNC control: SINUMERIK 840D - Documentation - Further comprehensive equipment ... No guarantee for completeness or accuracy of the technical data and equipment. Subject to prior sale. Detailed technical datasheet and information on equipment available upon request.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Prodamo to brusilko, vključena, možen preizkus. Strojni parametri brusilke: brušenje rotacijskih delov, vpetih v konicah, s točnostjo 0,001 mm Maks. vrtljivi premer: 0–1.450 mm Maks. vrtljiva dolžina: 6.000 mm Maks. masa valja: 20.000 kg (25.000 kg v lunetah) Premer brusnega koluta: 915 mm Kdodpfx Asxxrzzof Tog Širina koluta: 100 mm Brezkontaktno merjenje dimenzij, toleranc in geometrije obdelovanca, vključno s tiskom merilnega protokola. Možnost 100 % meritve z ultrazvokom. CNC krmiljenje z možnostjo brušenja oblikovanih površin (stožec, konkavna in konveksna, CVC). Brušenje keramičnih in kovinskih nanosov z uporabo diamantnih in keramičnih brusnih kolutov. Na stroju se zaključuje naročilo.

Leto izdelave: 2003, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Horizontal machining center with hydrostatic X, Y, Z guides for highest precision TECHNICAL DETAILS Kdodpfx Afepdqrho Tjg X travel: 2000 mm Y travel: 1250 mm Z travel: 1400 mm Spindle speed: 20 – 5,000 rpm Torque: 750 Nm Tool holder: HSK 100 CNC control: SIEMENS 840D Tool changer: 60 positions Pallet size: 1250 x 1250 mm Spindle power: 20 kW Rapid traverse X-Y-Z: 18 m/min Table load capacity: 3 / 5 t MACHINE DETAILS Machine weight: approx. 15 t Space required: approx. 10.5 x 8.5 x 4.1 m EQUIPMENT NC rotary table 2-station pallet magazine Operator console for loading station Internal coolant supply (ICS) 3D touch probe Chip conveyor Packaging for international transport is not included! EXW (Ex Works) delivery is also possible.