Stroj za vrtenje navojev

WALDRICH COBURG 16 GLS 25-90

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle Kodpfxjxmhdnj Aacowu - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Travel in Z: 750 mm Kwedpfjw Tg Adjx Aacou Tool Carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feeding: Short bar loader, EMCO LM 1200 Finished parts removal: Pneumatic workpiece pick-up unit with conveyor belt Oil mist extraction: Mechanical separator, manufacturer Absolent Tool holders: Various fixed and driven holders Additional equipment: Spindle cooling unit

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, required space approx. 3.0x1.5 m. Before sale, the machine will be fitted with a new Siemens S7 control system including a new operator panel, and the dressing quill for the grinding wheel is electrically actuated via servo motor. The machine will be thoroughly checked, with defective parts repaired or replaced. Various options possible (coolant system, loading/unloading devices, workpiece rulers, etc.). Kedpfx Aasuy Ifgecewu

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 7.000 kg, Ta stroj je konfiguriran s 4 popolnoma elektronskimi CNC osmi in ima integrirano programsko opremo, ki generira samodejni program. Opis: Največji premer zobnika: 400 mm Širina zobnika: 76 mm Hod: 82 mm Obrati: 150 - 700 obr/min Modul: min. 0,5 mm Kwsdpfxowvbqie Aacou Modul: maks. 6 mm Teža stroja: približno 7500 kg Električna oprema: – Obratovalna napetost: 380/400 V – Zaščita: 20kVA Stroj z novim CNC Siemens 808D Siemens pogoni in servomotorji Nova nadgradnja 2025 Zasloni za samodejno generiranje programov Samodejni cikli NR12 Vključen je: Transporter odrezkov Rezervoar za hlajenje Samodejno mazanje Digitalni nadzor tlaka Hidrostatično vodilo

Stanje: rabljeno, Leto izdelave: 2008, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 680 mm, največja hitrost vretena: 24.000 obr/min, Lot no. 5.3-745 Kwsdpfxsrairwj Aaceu 1 used horizontal machining center Heckert HEC 400D, year of manufacture 2008 CNC control Sinumerik 840D NC rotary table, B-axis Tool magazine for 80 tools Pallet changer device, 2 pallets 400 mm x 400 mm Through-spindle coolant supply (IKZ) Chip conveyor Coolant system Technical data: X-axis travel (longitudinal): 650 mm Y-axis travel (vertical): 650 mm Z-axis travel (cross): 680 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 24,000 rpm Tool stations in changer: 80 Machine weight approx.: 13,000 kg Technical data, accessories and machine description are non-binding.

Stanje: rabljeno, Leto izdelave: 1988, obratovalne ure: 1 h, številka stroja/vozila: V 516, skupna širina: 2.000 mm, skupna dolžina: 7.000 mm, skupna višina: 1.800 mm, obratovalni tlak: 300 letvica, stiskalna sila: 90 t, maks. debelina aluminijaste pločevine: 5 mm, moč: 11 kW (14,96 KM), lastna masa: 16.000 kg, rezalna sila: 90 t, leto zadnje generalne obnove: 2025, Package dimensions: 400x400 mm Kwodpfolhqd Rsx Aacju Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Aluminium throughput: 2,000–3,000 kg/h Drive power: 11 kW Installation area: 7 x 2 x 2.5 m Machine weight: 16 t With wheels or oil collection tray Location: Austria Available from: 30/01/2026

Stanje: rabljeno, Leto izdelave: 2004, Presskraft: 630 t Hub: 800 mm Ständerweite: 2.600 mm Abstand Tisch/Stößel (bei oberem, verstelltem Hubanschlag): 1.500 mm Tischfläche: 2.500 x 1.300 mm Ziehkissendruck (im Tisch): 300 t Ziehkissenhub (im Tisch): 300 mm Stößelfläche: 2.500 x 1.300 mm Seitlicher Ständerdurchgang: 1.040 mm Abwärtsgeschwindigkeit: ab 600 mm/sec Aufwärtshub-Geschwindigkeit: 360 mm/sec Arbeitsgeschwindigkeit: 14 – 42 mm/sec Antriebsleistung: 145,0 kW Maschinengewicht: 85,0 t Kedpfx Ajv Svaroacewu Platzbedarf (BxTxH): 4,2 x 4,0 x 7,8 m Bauhöhe über Flur: 6,80 m Bauhöhe unter Flur: 1,0 m Vorführmaschine aus einer technischen Hochschule mit ca. 920 Betriebsstunden – neuwertiger Zustand! Für Handbeschickung gemäß CE-Norm zugelassen. Mit ölhydraulischem Antrieb, druck-, zeit- und wegabhängig steuerbar, oberer und unterer Hubbegrenzung, Lichtschranke (Sick) vorder- und rückseitig, hydraulischem Ziehkissen im Tisch inkl. Auswerferfunktion, hydraulischer Schnittschlagdämpfung, mechanischem Tiefenanschlag über 4 motorisch verstellbare Spindeln, hydraulischer Stößelverriegelung, Zweihandbedienung, 2 Werkzeugwechselkonsolen, 4 hydraulische Kugelrollenleisten im Tisch, 4 Schwingelemente. English translation: Press force: 630 t Stroke: 800 mm Upright clearance: 2,600 mm Distance table/ram, max. stroke up (adjusted): 1,500 mm Table size: 2,500 x 1,300 mm Cushion force in table: 300 t Cushion stroke in table: 300 mm Ram area: 2,500 x 1,300 mm Side frame pass opening: 1,040 mm Downward speed: from 600 mm/sec Upward speed: 360 mm/sec Working speed: 14 – 42 mm/sec Drive motor power: 145.0 kW Machine weight: 85.0 t Space requirements (W x D x H): 4.2 x 4.0 x 7.8 m Overall height above floor: 6.80 m Foundation pit depth below floor: 1.0 m Demonstration machine from a technical university with approx. 920 operating hours – as new condition! Approved for manual loading/unloading according to CE standards. Equipped with electro-hydraulic drive, pressure/time/position-dependent controls, upper and lower stroke limit, light barriers (Sick) front and rear, hydraulic die cushion in table incl. ejector function, hydraulic cutting shock absorber, mechanical depth stop via 4 motorised spindles, hydraulic ram locking, two-hand operation, 2 die change consoles, 4 hydraulic ball roller strips in the table, 4 vibration-damping elements.

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Kwedpfx Aaevy Ihdocou Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools upon agreement

Leto izdelave: 2009, Stanje: dober (rabljeno), Lifting capacity: 30 t Kwjdoqiz N Rspfx Aaceu Precision lift Lifting height: 9 meters

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Wheel diameter - max. 100 mm Wheel width 26 mm Module - max. 3 Module - min. 0.1 Control system Siemens 840 D SL Operating hours 9,598 h Total power requirement 45 kW Machine weight approx. 7 t Space requirement approx. 4x3x2.5 m Gleason 100S Gear Shaping Machine for manufacturing internal and external cylindrical gears and other regularly recurring rollable profiles and shapes on the cylindrical workpiece circumference, as well as for single-piece production of profiles. Technical specifications: Nominal workpiece diameter 100 mm Maximum rotating diameter 150 mm Nominal module of the machine approx. 3 mm (reference value depending on the respective machining task) Stroke spindle speed range 0 - 3,000 rpm Manual stroke position adjustment range 20 mm Maximum gear width 26 mm Minimum rise height of hydrostatic skew guide 400 mm Minimum/maximum distance between tool and workpiece spindle -20/+180 mm Kwodpfx Aasv Ehbbscsu Column tilt range (manual) -1/+11° Tool holder (manual clamping) HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight approx. 7,000 kg with robot cell