Obdelovalni centri s prehodom nakup rabljenega (134)

Stanje: rabljeno, Leto izdelave: 2023, New demonstration machine! List price: €76,170 net Base machine complete in standard configuration for drilling and grooving: For detailed technical specifications, see the data sheet for ProTec type 0571. Processing unit includes: PowerBlock with 21 spindles and 1 grooving saw: - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece dimensions and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with triple magazine for automatic tool change, motor 5.5 kW (S1), 1,000–20,000 rpm, with frequency inverter, clockwise and counterclockwise rotation, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm Information: Machining unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit Connected load: 12 kVA Rated current: 17.5 A Fuse: 32 A Voltage: 400 V, 50 Hz, 3 phase (without transformer) Power supply: TN or TT network Pneumatic connection: 7 bar (102 psi) At the machine: coupling plug (quick coupling) ¼", DN7.2, brass, supplied by manufacturer To the machine: coupling socket (quick coupling) ¼", DN7.2, brass, supplied by customer Supply hose, inner diameter at least 12 mm Compressed air consumption: continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction: Connection: 3x extraction nozzles, dia. 80 mm Extraction speed: 30 m/sec (measured at suction nozzle) Extraction requirement: min. approx. 2500 m³/h Machine weight: approx. 1650 kg (including options!) Machine installation area: In principle, a ProTec fix can be bolted to the floor. Concrete base (or foundation) is required (at least at the 4 machine corners/machine feet). Equipment: - Protec 571 Profit HSK63F with triple magazine - Roller table 765 mm (Y-axis), foldable, for machine front side, 500 mm wide - Roller table 765 mm (Y-axis), foldable, for machine rear side, 500 mm wide - Auxiliary stop 600 mm with integrated rollers for roller tables - Additional safety device via lamella curtain Requirement for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec tool shank ø 10 mm with clamping surface (JSO) 1 carbide-tipped point drill 5x70mm (usable length 35mm), LH #30566-5-05035-L 3 carbide dowel drills 5x70mm (usable length 35mm), RH #30540-5-05035-R 4 carbide dowel drills 5x70mm (usable length 35mm), LH #30540-5-05035-L 3 carbide dowel drills 8x70mm (usable length 35mm), RH #30540-5-08035-R 5 carbide dowel drills 8x70mm (usable length 35mm), LH #30540-5-08035-L 2 carbide dowel drills 10x70mm (usable length 35mm), LH #30540-5-10035-L 1 carbide hinge drill 15x70mm (usable length 35mm), LH #30300-5-15070-L 1 carbide hinge drill 20x70mm (usable length 35mm), RH #30300-5-20070-R 1 carbide hinge drill 35x70mm (usable length 35mm), RH #30300-5-35070-R 1 carbide grooving cutter ø 125/30 mm, groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and after consultation Tool holder HSK63F 3.00 pcs Ibedpsw Tfzfjfx Ah Asf For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm 3.00 pcs Insert shank cutter Z1+1 1.00 pcs, carbide-tipped with insert drill cutting edge ø20, S25, LH 120, L2/L3 58 mm Groov

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Delovne dimenzije obdelovanca: - Dolžina: 250 mm - 2400 mm - Širina: 240 mm - 800 mm - Debelina: 12 mm - 60 mm AGREGAT 2V19 HIGH SPEED 7500 2 vertikalni vrtalni enoti z 19 vpenjalnimi vreteni (posamezno vodljive s spremenljivim območjem hitrosti). Vpenjanje vretena za varno doseganje globine vrtanja. AVTOMATSKA REZKALNA ŽAGA, OBRAČLJIVA ZA 90° ENOTA ZA NANOS LEPILA za nanos lepila v konstrukcijske vrtalne luknje od zgoraj. Enota s šestimi lepili šobami. Šobe ročno nastavljive v smeri Y v razmiku 32 mm. Dovod lepila z lepilno črpalko, regulatorjem tlaka, filtrom za lepilo in posodo za čiščenje šob. POVEZAVA STROJEV ZA NAPRAVE HOMAG GROUP Dovozni transport obdelovanca: 4-stebrični transporter s pogonskim jermenom za transport obdelovancev, razdalja med sredicami: 3.100 mm Ibjdpfjxvy H Hjx Ah Asf - SISTEM UPRAVLJANJA POWERCONTROL - ROČNA UPRAVLJALNA ENOTA - PROGRAMSKA OPREMA WOODWOP 5.5

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25167180701, skupna širina: 1.000 mm, skupna višina: 60 mm, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 20 m/min, višina obdelovanca (maks.): 60 mm, vrtljajska hitrost (min.): 4.000 obr/min, moč: 4,5 kW (6,12 KM), potreba po zraku: 2.000 m³/h, CNC Processing Center Manufacturer: Masterwood Model: Project TF 100 2.0 Technical Specifications: Axes: X-Axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0–25 m/min Y-Axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0–50 m/min Z-Axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min The minimum and maximum workpiece sizes depend on the weight and also on the length-to-width ratio. – Air tables in the working area – Roller support at infeed and outfeed – Plate measuring sensor – Ball screw and linear guides – Rack and pinion drive – Centralized lubrication – Import of DXF files Milling unit Including Masterwork Software extension Spindle speed: 1,000 to 18,000 rpm. Motor (frequency controlled): 3.3 kW Incl. integrated extraction control (While drilling, only the drill head is extracted; during milling, only the milling unit is extracted) Drilling head with 16 drills for 5-sided machining Grooving saw unit Milling unit with 6-position tool changer Incl. grooving saw blade, 2 diamond milling cutters, 1 WPL finishing cutter Preparation for CLAMEX and door package 2 foldable roller conveyors Milling unit for Clamex connectors Milling unit designed for door processing for machine with tool changer, complete incl. dedicated tool change station in the tool changer, angle gearbox for receiving a mortise lock cutter, macro for mortise lock Automatic centrally controlled lubrication Monitoring camera Isdpfxjxz Hgds Ah Asbf

Stanje: rabljeno, Leto izdelave: 2005, Delovno območje: X=2970 mm / Y=1725 mm. Hitrosti pomika osi: X=60, Y=45, Z=25 m/min. Teža: 3200 kg. Lokacija skladišča: Nattheim. Iedpfx Ahjw Dccco Ajbf

Stanje: rabljeno, številka stroja/vozila: 007826, Working area X-axis: 5600 mm Working area Y-axis: 1200 mm Working table: With vacuum console supports Main spindle power: 12 kW Number of controlled axes: 4 axes Maximum edge height: 60 mm Number of drilling spindles: 17 Number of tool stations: 12 Ibedpfx Ahewgkt Uj Ajf

Stanje: rabljeno, Leto izdelave: 2007, Pomik osi: X=4400 mm, Y=2195 mm, Z=440 mm Delovno polje v X=3650 mm, Y=1560 mm Prehodnost: 330 mm Elektrovreteno SCM Power 2000 Visokohitrostno rezkalno vreteno z močjo 13 kW Rotacijska os Vector (C-os) Ventilator za čiščenje orodja na rezkalni enoti Vpenjanje orodja HSK 63 F Hitrost vrtenja 600 – 24.000 1/min brezstopenjsko preko inverterja Moč motorja 8,5 kW Nosilci orodja: 6 kos Menjalnik orodja: Rapid 12 (12 mest) Vakuumska črpalka 250 m³/h / 5,5 kW Maks. vakuum: 0,9 bar Referenčni prisloni na straneh mize Vrtalni agregat z 11 vreteni (7 vertikalnih / 4 horizontalni) Krmiljenje: NUM serija 1000 Uporabniški vmesnik: XILOG Plus PC Office Hardware WINDOWS XP Professional Skupna priključna moč: max. 27,5 kW Teža: 5200 kg Skladišče: Nattheim Ijdsw Dcb Sspfx Ah Ajbf

Stanje: rabljeno, Leto izdelave: 2016, TECHNICAL DATA AXES Max. Workpiece Dimensions X-Y-Z mm: 3050 x 800 x 50 Min. Workpiece Dimensions X-Y-Z mm: 300 x 90 x 10 Working Area Drilling/Grooving mm: 0 x 800 / 0 x 800 X-Axis Stroke mm: 750 Max. Traverse Speed X-Y Axes m/min: 25 DRILLING UNIT Vertical Spindles: - Number: 7 (4X-4Y, one shared) Horizontal Spindles (along Y-axis): - Number: 2 (1+1) Horizontal Spindle (along X-axis): - Number: 1 Fixed Grooving Saw (Direction): X Saw Blade Diameter mm: 100 Max. Saw Blade Thickness mm: 5 Motor Power kW (HP): 1.5 (2) Spindle Speed rpm: 3350 Saw Blade Speed rpm: 4300 INSTALLATION Power Supply V (Hz): 380 / 400 (50/60) Installed Power kVA: 4.5 Compressed Air Requirement bar: 6 Compressed Air Consumption Nl/cycle: 90 Extraction Requirement m³/h: 1200 Extraction Air Speed m/sec: 20 Extraction Port Diameter mm: 80+80 F10L Drilling Unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles: 32 mm - 2 horizontal drilling heads: 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill holder D10 mm) - Speed: 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed: 4300 rpm - Motor power: 1.5 kW - Vertical pneumatic stroke per spindle: 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece Positioning and Drive of the Working Unit A CNC-controlled vacuum suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along the X and Y axes is via THK rails with transmission on reinforced toothed belts. Movement in the Z axis is pneumatic on ball bushing guides, with stops adjustable via the end position. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system is specifically designed for use in drilling and milling machines. Ibodpfsvvi I Rex Ah Ajf - CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and any faults or errors displayed in the operator's language Programming - Programmed via CN - Automatic optimization of drilling operations - Option for plate zero-point shift - Option to save and import drilling programs via USB dongle - Option to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the operating manual - Graphic display of aggregate configuration Vacuum Suction Cup "B-Power" vacuum suction cup with dual vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine Operating Interface Software: Xilog Maestro USB Hardware and Software Requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min.; multicore processor recommended - Memory: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The package includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphical programming - Supported programming with graphical and syntax aids for drilling operations - Ability to create and save machining macros Integrated Additional Functions - Self-diagnosis and error reporting in the operator's language - User interface in

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Ibedpfovwbp Asx Ah Asf

Stanje: rabljeno, Leto izdelave: 2021, 6000 W pri 20°C vodi in 32°C sobni temperaturi Dimenzije (D/Š/V) 55 x 55 x 140 cm Lokacija skladišča: dobavitelj Isdpfevvi E Aex Ah Asbf

Stanje: rabljeno, Lokacija skladišča: Nattheim Iedpfjvvi E Nsx Ah Aebf

Stanje: rabljeno, Lokacija skladišča: Nattheim Ibedpfsvvi Haox Ah Aef

Stanje: rabljeno, Leto izdelave: 2011, Obdelovalna velikost v X-smeri: 2770 mm Obdelovalna velikost v Y-smeri: 1220 mm Obdelovalna debelina (Z-mera): 80 mm Zasnova stroja: portalni stroj Moč glavnega vretena: 11,0 kW Hitrost glavnega vretena: 1500 - 24.000 obr/min Vektorsko vodeno vreteno: Da Ibodpfx Aevvi Htoh Aof Vpenjalni sistem: HSK 63 F Hlajenje vretena: zračno hlajenje Število osi: 3 Menjalec orodij: Da, kos Število mest za menjavo orodij: 10 kos Pisalniška tipkovnica: Da Miška: Da Programski sistem: Xilog Plus DXF vmesnik: Da Možna spletna povezava: Da CD-ROM pogon: Da Izvedba mize: rešetkasta miza Ustavljalni sistem: ustavljalni valj Število vakuumskih črpalk: 1 Moč vakuumske črpalke: 250 m³/h Zavarovanje: varnostne pohodljive preproge Lokacija skladišča: Sonnefeld

Stanje: rabljeno, Leto izdelave: 2004, Lokacija skladišča: Nattheim Iedpsvvi Hysfx Ah Asbf

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Isdpfxowmm Nro Ah Ajbf

Stanje: rabljeno, Leto izdelave: 2000, Lokacija skladišča: Nattheim Ijdjvvi Ikjpfx Ah Aobf

Stanje: rabljeno, Leto izdelave: 2021, Expozicijska enota (malo rabljena) Enota za rezanje mehkih materialov, kot so satovje, akustični elementi in tkanine, z nihajnimi gibi Možnosti obdelave: rezanje ravnih ali radialnih izrezov Tipična področja uporabe: • Tekstil: rezanje tkanin ali tekstilij (npr. usnje, klobučevina itd.) • Razrez satovja pri vratih, stopniščni gradnji, sejemski gradnji, gradnji avtodomov • Akustični elementi: rezanje poliestra, pene ali drugih zvočno absorpcijskih materialov • Letalstvo, ladjedelništvo, vesoljska industrija: rezanje satovja (honeycomb core) Tehnične specifikacije Največja vhodna hitrost vrtenja: 6.000 min-1 Največja izhodna hitrost vrtenja: 9.000 min-1 Prenos: 1 : 1,48 Največji navor: 8 Nm Dovoljena obratovalna temperatura: maks. 85°C Položaj nosilca navora glede na orodje: 360° Kot obdelave: 0° Št. izhodov za orodje: 1 / fiksno Mazanje: mast / polnjenje za celotno življenjsko dobo Amplituda: 4 mm Frekvenca: 150 Hz Lokacija skladišča: Garbsen. Ijdpfx Ahovvi Iqj Ajbf

Stanje: rabljeno, Leto izdelave: 2021, Razstavni agregat (malo rabljen) Mazanje: mast Največja izhodna hitrost n2: 4.000 min⁻¹ Prenos (n1:n2): 1:0,8 Teža: cca 8 kg Priklop na stroj HSK F63 Oprijem orodja Uporabna širina 24 Lokacija skladišča: Garbsen Ijdpfxovvi Iws Ah Aobf

Stanje: rabljeno, Leto izdelave: 2002, Obdelovalne mere (premer orodja 25 mm): X=3015 mm Y=1483 mm Z=325 mm Maks. hodilci: X=3268 mm Y=1483 mm Z=325 mm največja programska hitrost: X/Y = 75 m/min / Z = 30 m/min Orodni nosilec HSK 63F Vrtalna enota 7964, 14 vertikalnih vrtalnih vreten s 32 mm razdaljo (10 v x / 4 v y) Žagalna enota 7946, 3,6 kW, pnevmatsko vrtljivo za 90° Glodalna enota 7933, 9 kW Lesena C-os (vektorska os) Magazin za orodja (krožnik s 6 mesti) Ročna upravljalna naprava Laserska naprava (pozicioniranje sesalcev) PC upravljalna konzola z 17" monitorjem Operacijski sistem Windows 2000 Programska oprema: TwinCAM32 - office verzija Vakuumska črpalka 100 m³/h suhi tek Selektivne varnostne stopalne preproge (3-polno delitev) Lokacija zaloge: Nattheim Ijdpfxsvvi Nbo Ah Aebf

Stanje: rabljeno, Leto izdelave: 2014, Število vrtljajev: 1450 vrt/min Motor: 2,4 kW Sesalna zmogljivost / volumenski pretok: 70 m³/h Sesalni tlak: 3 mbar Rezervoar: Obratovalni nadtlak 0,99 bar Prostornina / litrov: 90 Obratovalna temperatura: 50°C Leto izdelave: 1989 Št.: 400 100 Lokacija zaloge: Dobavitelj Isdpfxjvvi Nns Ah Aebf

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The machine base is a monolithic design made from thick-walled steel. It is reinforced throughout the entire machine bed with welded triangular plates, which ensures exceptional rigidity. The use of a large-base triangular form in load-bearing components is key to ensuring lasting precision and stability. The machine layout allows an optimal workflow for the operator while requiring minimal space. This robust base offers the processing unit a balanced and secure foundation with excellent load distribution. The mobile gantry unit carrier is built from a solid monoblock. It moves in the X direction on prismatic, ground guides with recirculating ball carriages. Mounted on the mobile unit carrier, the processing unit also travels on prismatic, ground guides and recirculating ball carriages. Axis Movement: The drive system in the Y and Z axes utilizes precision-ground recirculating ball screws of the highest accuracy grade. The drive in the X-axis is by a backlash-free, preloaded precision rack and pinion system. This enables balanced load distribution during positioning. Such characteristics are essential for smooth operation, even in complex machining scenarios. Axis movement is powered by brushless AC servo motors, which provide excellent positioning speeds thanks to very short ramp times. The feedback systems are fully integrated into these motors, making the drive system entirely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection): 0.9 bar Control System / Control Cabinet · Office PC or industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote controller with main functions Iedpfxovvi Nzj Ah Asbf ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC provides the NC control with a unique level of familiarity: the software operates on Windows XP and allows fast and easy programming, which is also easy for inexperienced users to learn. The system is open, supporting connections for CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Installation of all network systems and any commonly available CAD programs is also possible. To save space, the control cabinet is located beneath the machine table, and the operator works from a separate, mobile control terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software Features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Supported programming - Calculator for direct data transfer - Graphics and syntax help for drilling and milling operations - Parametric programming to perform identical panel processing on different p...

Stanje: rabljeno, Leto izdelave: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Drilling and milling, made for you! This numerically controlled machining center comes equipped with a comprehensive range of milling/drilling tools to meet any requirements for processing wood and similar materials. - Highly efficient, equipped with drilling spindles at 8,000 rpm and the most robust spindle technology available on the market, offering more than 1,000 maintenance-free operating hours. - Superior and more comprehensively equipped: various configuration options via the multifunction table, allowing the machine to be optimally equipped according to specific requirements. - Easier and more intuitive programming, thanks to the integrated Maestro CNC CAD/CAM module. - User-friendly: The work table is always accessible, the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no safety barriers. Load-Bearing Structure The load-bearing structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid. The especially wide support surface was specially designed to provide the machine with maximum stability, ensuring lasting precision regardless of operating conditions, and does not require anchoring to the floor. The base forms a large and solid support for the moving gantry: the work unit is thus equipped with a balanced, stable, and highly resilient support, capable of withstanding even the most demanding stress loads, leading to improved performance quality and greater accuracy. Iedpfxsvvi N Ie Ah Aebf The moving gantry is a solid single component anchored to both sides of the base and slides along prismatic guides with recirculating ball shoes of the highest quality. Dual motorization along the X-axis ensures top performance even under heavy-duty operating conditions. Movement of the lower mobile unit (X-axis) and the working unit along the beam of the mobile unit (Y-axis) is achieved via a helical rack and pinion drive. This provides greater tooth-on-tooth engagement, achieving higher acceleration as well as increased speed along the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring the finest machining quality by eliminating vibrations. Movement along X-Y-Z axes is provided by brushless motors, powered by static inverters, delivering: - Reduced processing times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No more reference point setup at machine startup due to absolute encoders - Eliminated general maintenance for the drive system since the brushless system contains no brushes Management of axis movements and general machine components is performed via an industrial NS module with digital D...

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The base frame structure is a monolithic construction made from thick-walled steel. It is reinforced with welded triangular steel plates across the entire machine bed, resulting in exceptional stability. The triangle shape with a wide base used for load-bearing components is the secret to ensuring long-term precision and stability. The machine layout allows the user to achieve an optimized workflow while minimizing the required footprint. The base structure supports the machining unit with a balanced and secure foundation, offering particularly effective load distribution. The mobile gantry-style aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis on precision-ground prismatic guides via linear ball bearing carriages. On this carrier, the machining unit is also mounted on prismatic, ground guides and linear ball bearing carriages. Axis Motion: The drive system for the Y and Z axes uses precision-ground ball screws of the highest accuracy class. The X axis is driven by a backlash-free, preloaded precision rack and pinion system, ensuring balanced load distribution during positioning. This characteristic is essential to guarantee smooth motion, even in complex operations. All axis movements are performed by brushless AC servomotors. These deliver excellent positioning speeds due to their very short ramp-up times, and their measuring systems are fully integrated. These features make this type of drive completely maintenance-free. · Rapid traverse X: 40 m/min · Rapid traverse Y: 60 m/min · Rapid traverse Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control System / Control Cabinet · Office PC or Industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote control unit with essential functions ELECTRICAL/ELECTRONIC CNC CONTROL The universal system is equipped with a powerful NC control. The integrated office PC brings a unique level of familiarity to the NC control: the software runs on Windows XP, allowing fast and easy programming, which can be quickly mastered even by inexperienced users. The system is open and accommodates the connection of CD-ROM drives, audio cards, barcode scanners, modem, printer, scan systems, etc. Installation of all standard network systems and all commercially available CAD programs is possible. To save space, the control cabinet is installed beneath the machine table; the operator works at a separate mobile terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: Isdpevvi Rfjfx Ah Ajbf - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I, GB, F, D, E) - Linear and circular interpolation in three axes, spatially linear, spiral in the selected plane - Supported programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to allow identical panel processing on different

Stanje: rabljeno, Leto izdelave: 1999, Lokacija skladišča: Nattheim Iodpfx Asvvi Rxjh Aobf

Stanje: rabljeno, Leto izdelave: 2011, Teža: ca. 4500 kg Skladišče: Nattheim Iodpfx Ahjvvi R Ej Aobf

Stanje: rabljeno, Leto izdelave: 2019, including tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center comes with a comprehensive array of milling and drilling tools to meet any woodworking requirement. - Highly efficient: equipped with drilling spindles running at 8,000 rpm and the industry's most robust spindle technology, offering over 1,000 maintenance-free operating hours. - Optimal and completely equipped: the suction cups can be individually configured on the TV FLEX worktable, allowing the machine to be tailored precisely to your needs. - Easy and intuitive programming thanks to integrated Cad-Cam MAESTRO CNC software. - User-friendly operation: the lowered machine frame provides easy access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine bed. In the PRO SPACE version, no additional protective infrastructure is required. Supporting structure The supporting frame is made from an exceptionally sturdy, monolithic steel base, heavily ribbed and extremely robust. The extra-wide support surface is specially designed to give the machine maximum stability and to ensure constant precision under all working conditions. No floor anchoring is required. The base forms a large and solid support for the moving gantry. The machining unit is equipped with a balanced, stable, and highly durable support structure that withstands heavy loads, guaranteeing top-tier performance and superior accuracy. The moving gantry is made from a single, solid piece, anchored to the base, and runs on premium prismatic rails with ball-bearing carriages. The machining unit is attached to this and moves in the Y and Z axes, also on prismatic rails with ball-bearing carriages. The movement of the lower mobile unit (X axis) and the machining unit along the gantry (Y axis) is ensured by a rack-and-pinion drive with helical gears, resulting in greater tooth engagement for increased acceleration and higher speeds along the X and Y axes. The specially designed helical gearing reduces wear on mechanical parts and enables quieter operation. The vertical Z-axis is driven by a ball screw, which ensures perfect balance under dynamic load, as well as high acceleration and deceleration speeds. The main milling unit is directly coupled to the Z-axis carriage, providing extremely fine processing quality by eliminating vibrations. The X-Y-Z axis movements are driven by brushless motors powered by static inverters, which provide: - Shorter machining times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No setup required upon machine start-up due to absolute encoders - Elimination of general maintenance work as the brushless system has no brushes The control and management of all axes and working elements is handled via e Ibjdpfjvvi Scox Ah Aef